【US10572896B2】Mediausagemonitoringandmeasurementsy

Seagate Media Sync User GuideSeagate Media Sync User Guide© 2013 Seagate. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of Seagate.ChangesThe material in this document is for information only and subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Seagate assumes no liability resulting from errors or omissions in this document, or from the use of the information contained herein. Seagate reserves the right to make changes or revisions in the product design or the product manual without reservation and without obligation to notify any person of such revisions and changes.TrademarksSeagate, Seagate Technology, the Wave logo, and Seagate Media are trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.Seagate Technology LLC10200 S. De Anza Blvd.Cupertino, CA 95014USAContents1. Synchronizing Your Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3What You Can Do with Seagate Media Sync . . . . . . . . . . . . . . . . . . . . . . . . 3Install Seagate Media Sync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3Select a Device and View the Device Settings . . . . . . . . . . . . . . . . . . . . . . . 3Synchronization Plans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Synchronize Files Using Simple iPad or Simple Sync for Mac . . . . . . . . . . . 4Synchronize Files Using Custom Sync for Mac . . . . . . . . . . . . . . . . . . . . . . 5Synchronize Files Using Simple iPad or Simple Sync for Windows . . . . . . . 5Synchronize Files Using Custom Sync for Windows . . . . . . . . . . . . . . . . . . . 6Change or Delete Sync Plans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72. Customizing Your Drive Settings (Windows Only) . . . . . . . . . . . . .9Use Power-Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Test Your Drive for Errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Turn Drive Lights On or Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Display Your Drive’s Free Space and Capacity . . . . . . . . . . . . . . . . . . . . . 10Display Tips and Tricks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Check for Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101. Synchronizing Your Media What You Can Do with Seagate Media Sync 1.Synchronizing Your MediaWith the free Seagate Media Sync app, you can copy and synchronize your media files with your external drive. You can copy files from your computer or mobile device to your external drive or vice versa. You can use the Seagate Media Sync app with any NTFS- or FAT32-formatted USB, FireWire, or eSATA drive.What You Can Do with Seagate Media SyncWith the Seagate Media Sync app, you can:•Copy and synchronize files on a Mac (OS 10.6.8 or later) or Windows(Windows 8, Windows 7, Windows Vista, and Windows XP) computer.•Set filters to synchronize files that can only be played on an iPad, iPhone, or iPod touch.•Specify which folders and media types to synchronize between your computer and external drive.•(Windows only) Adjust many power-saving options for your drive.Install Seagate Media Sync1.Go to / support/downloads and locate the Media Sync software version foryour operating system.2.Download and install the Media Sync software.Note: The Software Update feature automatically informs you when an update is available for yourand select software. You can also manually check for new updates. In Windows, click ,Check for Software Updates. On Mac, choose Software Update from the Help menu. Select a Device and View the Device Settings1.On your desktop, start the Media Sync app.2.In the Media Sync window, click the drive’s name or icon to display its information.Note: The Seagate Media Sync app detects all NTFS- and FAT32-formatted USB external drives and lists them in the Media Sync window. It can take a few seconds to detect your device. Ifyour device does not appear, make sure it is connected and turned on.1. Synchronizing Your Media Synchronization Plans3.To change the device’s settings, click . To review the device information, click . Synchronization PlansYou can copy and synchronize media files, including videos, photos, music, and documents, with your Seagate Wireless or GoFlex Satellite device. You can select the synchronization plan for a device, and then can set the synchronization to work automatically or manually.The Seagate Media Sync app includes these synchronization plans:•Simple iPad Sync synchronizes all media files that can be played on an iPad.Synchronized media is added to a folder on the external drive calledUser_ComputerName.•Simple Sync synchronizes all your media folders between your computer and external drive.Synchronize Files Using Simple iPad or Simple Sync for MacYou can also create a custom sync plan. See “Synchronize Files Using Custom Sync for Mac” on page5.1.Connect the USB 3.0 adapter and cable to your device and computer.2.On your desktop, start the Seagate Media Sync app.3.Select your device in the left panel of the Seagate Media Sync window if more than onedevice is displayed.4.Select a sync plan.5.To sync files that can be only opened on specific Apple, Android, or Kindle Fire devices,choose the device type under Sync files for.6.In Include, select the type of files to synchronize.7.Click Sync Now and the sync process starts, or select Automatic Sync to use that option.The Automatic Sync feature continuously tracks changes in synchronized folders andoverwrites the previous files with the newer version. Automatic Sync only works when yourexternal device is connected.Synchronize Files Using Custom Sync for Mac You can create a custom synchronization plan and select the folders and media types to synchronize between your computer and device.1.Connect the USB 3.0 adapter and cable to your device and computer.2.On your desktop, start the Seagate Media Sync app.3.Select your device in the left panel of the Seagate Media Sync window if more than onedevice is displayed.4.Select Custom Sync.5.Select Include my Movies, Music and Pictures folders to use your Mac’s default mediafolders.6.Click the + button and then navigate to the source media folders. Click the - button to removean item from the list.7.Select the files and folders to sync, and then click Add to Sync.8.To sync files that can be only opened on specific Apple, Android, or Kindle Fire devices,choose the device type under Sync files for.9.In Include, select the type of files to synchronize.10.Click Sync Now and the sync process starts, or select Automatic Sync to use that option.The Automatic Sync feature continuously tracks changes in synchronized folders ando verwrites the previous files with the newer version. Automatic Sync only works when your external device is connected.Synchronize Files Using Simple iPad or Simple Sync for WindowsYou can also create a custom sync plan. See “Synchronize Files Using Custom Sync for Windows” on page6.1.Connect the USB 3.0 adapter and cable to your device and computer.2.On your desktop, start the Seagate Media Sync app.3.If more than one device is connected, select your device. You can specify synchronizationsettings for each device.4.In the Media Sync window, click next to the device you want to sync.5.Click Simple iPad or Simple Sync, and then click Confirm.6.Click Sync Now or select Automatic Sync to use that option.The Automatic Sync feature continuously tracks changes in synchronized folders andoverwrites the previous files with the newer version. Automatic Sync only works when your external device is connected.Synchronize Files Using Custom Sync for Windows You can create a custom synchronization plan and select the folders and media types to synchronize between your computer and device.1.Connect the USB 3.0 adapter and cable to your device and computer.2.On your desktop, start Seagate Media Sync.TIP: If you are using Seagate Wireless Plus with Windows 8, press Windows key +D, and then select File Explorer. Double-click your Seagate Wireless Plus drive.Double-click the Media Sync icon.3.If more than one device is connected to your computer, select the appropriate device forsynchronization. Each device has its own settings.4.In the Media Sync window, click next to the device you want to sync.5.Click Custom Sync.6.Select the files and folders to sync, and then click Continue.7.Under Sync files for, select the type of device you are synchronizing.To sync only files that can be opened on a specific Apple or Android device, choose the device from the list. To sync all files identified as movies, music or photos, select All digital devices.8.Select the type of files to include.9.To see the file types for the selected device, click Review file types included.10.Click Finish.11.Click Sync Now, or select Automatic Sync to use that option.The Automatic Sync feature continuously tracks changes in synchronized folders andoverwrites the previous files with the newer version. Automatic Sync only works when your external device is connected.Your media is stored on your drive in a folder UserName_ComputerName.Note: If you are using Windows and your drive is partitioned, the folders with your synchronized data have the partition letter followed by the name of the computer. For example, if your customsync plan is synchronizing files on both your C: and D: partitions, the folders would beC_FolderName and D_FolderName.Change or Delete Sync Plans1.Click next to the drive.2.To delete the sync plan, click Delete sync plan. To modify your plan, click Edit syncsettings.2. Customizing Your Drive Settings (Windows Only) Use Power-Saving Mode 2.Customizing Your Drive Settings(Windows Only)You can control your drive’s settings, such as power and lighting, in the Seagate Media Sync app. By customizing power settings, for example, you can conserve the battery power so your drive stays on longer.Use Power-Saving ModeIn power-saving mode, your drive stops spinning when it is not in use for a certain time.Although power-saving mode uses less electricity, it takes more time for your drive to become active again when you want to use it.If you use your drive frequently, you can choose a longer time interval so your work is not interrupted when accessing files. If you use your drive less frequently, choose a shorter time interval to save energy.1.In Seagate Media Sync, click .1.In the Settings window, click Adjust Power Setting.2.Select an interval from the drop-down menu, or click Default to return to the 5-Minute setting.3.Click Apply to save the settings.4.Click Back to my devices to return to the Seagate Media Sync window.Test Your Drive for ErrorsYou can check the health of your drive and look for physical errors on your drive. Thediagnostic utility does not affect the data on your drive.1.In Seagate Media Sync, click .2.In the Settings window, click Test My Drive. The Test My Drive window opens.3.Click Test.If the diagnostic encounters an error during testing, the serial number of the bad device is displayed with instructions.4.Click OK to close the Test My Drive results.2. Customizing Your Drive Settings (Windows Only)Turn Drive Lights On or OffTurn Drive Lights On or OffYou can turn on or off the lights on your drive to save battery power. By default, your drive lights remain on and flicker to indicate drive activity and status.Note: This feature might not be supported on all Seagate drives.1.In Seagate Media Sync, click and then select Adjust Drive Lights.2.To turn the drive lights off, select Turn lights off.3.To turn the drive lights back on, click Display status and activity lights.4.Click Apply.Display Your Drive’s Free Space and Capacity1.In Seagate Media Sync, click to review the drive’s information.The drive information displays the serial number, firmware version, volume, capacity, free disk space, and file-system type.Display Tips and TricksYou can display popup messages that include special promotions and tips in the system tray.1.In Seagate Media Sync, click .2.In the Settings window, click Change Seagate Advisor Settings.3.Select Show Seagate Advisor messages. To turn messages off, deselect Show SeagateAdvisor messages.Check for UpdatesThe Software Update feature automatically displays when an update is available for the software. You can also manually check for new updates.1.In Seagate Media Sync, click .2.In the Settings window, click Check for Software Updates.3.To turn off Software Update, deselect Check for updates automatically.To check for updates, click Check Now. If new software is available, you can download it in the Software Updates window. For more information about the new software, click More Info.。

Getting StartedThis Home Control Gateway is a controller that supports home automation devices within a Home Control ecosystem. Home automation devices are added to the network, and provide users simple home control from mobile devices (smart phones, tablets) and web browsers. The gateway additionally communicates with, and controls, Bosch alarm panels using the Ethernet port connection. Activation ProcessThe following sequence of events must take place prior to the activation and daily use of the Home Control Gateway. Refer to the list below for task assignments and ownership.1. Dealer: The Dealer must register for services at:https://2. Bosch: The Bosch representative creates an Administrative Portal (AP) account and unlocksthe dealer’s account (this enables the dealer to order the controller). An AP account emailnotification is sent to the dealer.3. Dealer: The Dealer orders the Home Control Gateway. The Dealer registers the controllerand activates the service in Administrative Portal upon arrival of the controller.4. Dealer: The Dealer installs and configures the controller and enables a Bosch Alarm Panel tocommunicate with the controller.5. End-User: The End-User customizes and uses the Home Control ecosystem. Additionaldevice may be added at this time.G450 OverviewThe following descriptions refer to the buttons and LEDs on your gateway. Although these buttons are not the primary method for adding or removing devices, please familiarize yourself with the Home Control Gateway.Refer to the figure below for a system overview.are Trademarks of Robert Bosch GmbH, GermanyG450 overviewLog in to Your AccountThis section describes basic information on logging into your account. Logging in: 1. Go to . The login page opens.2.From your welcome email, insert your credentials (Username and Password) and click Login.3. Select the gateway you want to log into and click the Connect button. This is a convenient way tocontrol different gateways from a single account (one in your home, another in your summercottage). A status window briefly appears stating that the connection is in progress.4. The dashboard appears. The dashboard is your control center for the Home Control Gateway. Theappearance of your dashboard may vary slightly from the one below, depending on the devices you install.Refer to the next section for details about including new devices.Include (Add) DevicesThe Home Control Gateway wirelessly communicates with other controllable Home Control devices through an initial process called "pairing". For many devices, the Gateway supports a guided installation through a device installation wizard. This process walks you through all necessary steps to pair (include) your device.Pairing devices in close proximity1. Locate the device you want to pair.2. Place the device within 30 feet of the Home Control Gateway.3. Go to “Devices” and click “Add Device” to start the wizard.4. Click on the appropriate device category (plus symbol).5. Select the device type and model number that you want to install and click the symbol next to it.Follow the instructions on the screen.Your Bosch Security Dealer has already installed your Bosch Security System. You will not find thisPairing Installed Devices with a Battery Powered Home Control Gateway Sometimes controllable devices in your home are not easily moved within pairing distance of the Gateway. For example, a light switch that is already installed on a wall in another room, or a door lock. For these situations, the Gateway includes a battery pack (G100 only) that allows you to disconnect the Gateway from the power cable and bring it to the installed device. This step is optional, but if you do have pre-installed or otherwise non-movable controllable devices that you want to pair with the Gateway, please perform the following:1. Disconnect the Gateway’s network cable and power cable (the one that goes into the wall outlet)and press and hold the battery button (G100 only) for 5 seconds. Doing so causes theGateway to power up in battery mode.G100 only: blue LED will flash during the startup process. The blue LED illuminates continuously and2. Locate the device you want to pair.3. Press the button to set the Gateway to enter inclusion mode. Refer to the “pairing” or“inclusion” section of your device’s documentation for more information related to completing the pairing and/or inclusion process. The orange LED flashes rapidly for 3 seconds to indicate a new device was paired successfully.4. Press and hold the button for 5 seconds until all LEDs go off to save your changes. TheGateway exits the inclusion mode and turns off the battery mode.NoticeG100 only: If you want to exclude a device, follow the above mentioned steps, but press the button instead of the button. To exit, hold the button for 5 seconds until LEDs go off. This will save all changes.User Interface Features (for web and mobile apps)The Home Control Gateway provides a variety of interactive features accessed through a web browser, or through the use of a mobile device and supporting app. Refer to the list below:∙Card Carousel. This feature allows you to quickly view the current state of the system. The left card shows the connection state of all devices, and the right card shows if any of the security devices require your attention.∙House Modes (My Modes, Preset Modes). House modes are easy to use; pre-defined settings that allow you change your home automation configuration without the need to create scenes. This allows you to quickly toggle between the four presets (modes). These presets are optimized for theirimmediate use. You may adjust presets by using the button. This opens the configuration menu. ∙Weather widget (Web UI). The weather widget shows the temperature and current conditions for the city you choose. It also shows the local time of the device’s location.∙Event notification bar. The notification bar shows the latest events that occurred on the unit. Access the notification bar by pressing the pull-down button . Select events from the drop-down list.∙Turn All On/Off. This option allows you to quickly turn on, or off, all of your light switches:The numeric badge icon shows how many lights are on.∙Lock/Unlock All door locks. This option allows you to quickly lock, or unlock, all of your doors:The numeric badge icon shows how many doors are currently unlocked.Mobile Devices and the Remote Security Plus appIn addition to using the web browser for configuration and control, you can also perform the same tasks by using the Remote Security Control Plus app from your mobile device (e.g. smart phone, tablet). Both Android and iOS devices are supported by the app.To control with a mobile device, download and install the Remote Security Plus application from Apple’s App Store (), or from Google Play ().Perform the following:1. Launch the application and log in using the same credentials used when accessing the webbrowser dashboard. Depending on the operating system of your smart phone, you might see one of the following screens.2. Your dashboard window appears with the following preset modes (My Modes) as well as Shortcutsand your Favorite devices.3. Open the menu by clicking on Menu, or by sliding over your screen from left to right, depending onyour device.4. Select Devices to view and control your devices.5. Select Scenes to create or modify scenes using your mobile app. Follow the instructions on thescreen.Plan your GoalsThe Home Control Gateway and its components let you monitor, control, and automate many devices around your home. You and your smartphone (or PC or tablet) communicate with these devices. Such devices include cameras, door locks, lighting controls, and other supported devices. These devices can work independently, or in groups that work together, like a thermostat that turns itself down when it sees bright sunlight from a daylight sensor, and back up again when it gets dark.Proper planning and coordination are essential when utilizing the capabilities of the gateway in conjunction with your Bosch Security System. Understanding your current environment gives you a clearer picture as to how you want to automate your living space, and how you might improve it through the use of home control functionality.Monitoring and Security ApplicationsOne popular application is monitoring and operating electronic door locks. When your child gets home from school and unlocks the door, the Home Control Gateway can send you a text message or an email. You can view a still image, live or recorded video, from your computer or smartphone to be certain that your kids are home safe and didn't bring unwelcome guests. You can view live video from inside your home to check in on the babysitter while you are out, and so on.In the security and monitoring examples above, you use a powered door lock, a video camera and perhaps a motion detector. Most of these devices talk to the gateway through Z-Wave, ZigBee or Wi-Fi, interoperable standards in wireless control. How many of these devices will you need to connect? It all depends on what you want to accomplish.Energy Management ApplicationsWith the Home Control Gateway you can remotely, and automatically, create a household that runs at maximum energy efficiency with reduced energy bills. You can create "scenes" that adjust lights and climate to pre-determined settings that you control with one touch or that react automatically to changing conditions. You can remotely turn appliances off or on for example, turn off the lawn sprinkler when it starts raining or turn up the thermostat to warm the house when you’re on your way home.For many energy management applications, there are a wide range of plug-in and wall-mounted lighting switches that make any light remotely controllable. The Home Control Gateway is compatible with Z-Wave, ZigBee, and Wi-Fi thermostats. There are many plug-in modules that control indoor and outdoor appliances. And to make any device "smart", simply plug in a SmartSwitch, which not only allows you to control whatever you plug into it, but also to monitor that device's energy consumption over time. Wellness Assistance ApplicationsThe Gateway helps you protect your independent elderly loved ones by keeping you connected with them and helping to monitor and assist them. The Gateway can notify you if there is no motion in your loved one’s home, so you can check in and get help. The Gateway can also turn on lights when motion is detected, so there's no more fumbling for the bathroom light or dangerous stairwell lights in the middle of the night.Vital assistance like this provides security for both caretaker and the cared for, and is accomplished by adding compatible motion sensors and enabled lights. You can add home controlled window shades and daylight sensors, so it is no longer a strain for your loved ones to let light into the room. Convenience ApplicationsWith the Home Control Gateway and a mobile device, you can simplify your morning or evening routine. Simply touch one button to shut down, lock up and arm your house; no more running around to turn off every light, set the alarm and thermostat, and check that the doors are locked.These tasks are simple with the Home Control Gateway and the many different Z-Wave, ZigBee and Wi-Fi products and adapters on the market. You simply add one to each device, or application, that you want to remotely monitor or control.Before you move forward on how to “Automate your home”, where you'll learn how to control the gateway, take a few moments to ask yourself what kinds of monitoring and control tasks you'd like to accomplish, and what kinds of devices would help you accomplish them.Possibilities are endless within the home control spectrum when using the Home Control Gateway!Bosch Security Systems, Inc. • 130 Perinton Parkway • Fairport, NY 14450 • | 2017.06 | v3。

Sophos UTM Feature ListGeneral ManagementÌCustomizable dashboardÌRole-based administration: Auditor, read-only and manager for all functionsÌNo-charge, centralized management of multipleUTMs via Sophos UTM Manager (SUM)ÌConfigurable update serviceÌReusable system object definitions for networks, services, hosts, time periods, users and groups, clients and servers ÌPoint & Click IPS rule managementÌSelf-service user portal for one-click VPN setupÌConfiguration change trackingÌManual or fully automated backup and restore optionsÌEmail or SNMP trap notification optionsÌSNMP supportÌOne-time password (OTP) / Two-factor authentication(2FA) supports OATH protocol for WebAdmin, User Portal, SSL VPN, IPSec VPN, HTML5 Portal and SSH Login*ÌOne-click secure access for Sophos customer support** Network Routing and ServicesÌRouting: static, multicast (PIM-SM)and dynamic (BGP, OSPF)ÌNAT static, masquerade (dynamic)ÌP rotocol independent multicast routing with IGMP snooping ÌBridging with STP support and ARP broadcast forwarding ÌW AN link balancing: 32 Internet connections, auto-link health check, automatic failover, automatic andweighted balancing and granular multipath rulesÌZ ero-config active/passive high- availabilityÌA ctive/active clustering for up to 10 appliancesÌ802.3ad interface link aggregationÌQoS with full control over bandwidth pools anddownload throttling using Stochastic Fairness Queuingand Random Early Detection on inbound trafficÌF ull configuration of DNS, DHCP and NTPÌS erver load balancingÌI Pv6 supportÌR ED supportÌVLAN DHCP support and tagging**ÌMultiple bridge support**Network ProtectionÌStateful deep packet inspection firewallÌIntrusion protection: Deep packet inspectionengine, 18,000+ patternsÌSelective IPS patterns for maximumperformance and protectionÌIPS pattern aging algorithm for optimal performance*ÌFlood protection: DoS, DDoS and portscan blockingÌCountry blocking by region or individual country(over 360 countries) with separate inbound/outbound settings and exceptionsÌSite-to-site VPN: SSL, IPSec, 256- bit AES/3DES,PFS, RSA, X.509 certificates, pre-shared keyÌRemote access: SSL, IPsec, iPhone/iPad/Cisco VPN client supportÌVoIP handling for SIP and H.323 connectionsÌConnection tracking helpers: FTP, IRC, PPTP, TFTPÌIdentity-based rules and configuration withAuthentication Agent for usersAdvanced Threat Protection*ÌDetect and block network traffic attempting tocontact command and control servers usingDNS, AFC, HTTP Proxy and firewallÌIdentify infected hosts on the network Sandstorm Protection***ÌCloud-based sandbox to detect, block and gain visibility into evasive zero-day targeted attacks in active content such as executables, PDFs, Office Documents, and more ÌPreviously unseen suspicious files aredetonated in the cloud-sandbox and monitoredbefore being released to the end-userÌComplete reporting on all suspicious file activityincluding detailed sandbox analysis results AuthenticationÌTransparent, proxy authentication (NTLM/Kerberos) or client authenticationÌAuthentication via: Active Directory, eDirectory,RADIUS, LDAP and TACACS+ÌSingle sign-on: Active directory, eDirectoryÌSophos Transparent Authentication Suite (STAS)provides AD agent for transparent reliable SSOauthentication with Microsoft Active Directory***ÌSSL supportÌTools: server settings check, username/passwordtesting and authentication cache flushÌGraphical browser for users and groupsÌAutomatic user creationÌScheduled backend synchronization prefetchÌComplex password enforcementWeb ProtectionÌURL Filter database with 35 million+ sitesin 96 categories and 65+ languagesÌApplication Control: Accurate signatures andLayer 7 patterns for thousands of applicationsÌDynamic application control based onproductivity or risk thresholdÌView traffic in real-time, choose to block or shapeÌMalware scanning: HTTP/S, FTP and web-based email via dual independent antivirus engines (Sophos & Avira) block all forms of viruses, web malware, trojans and spywareÌFully transparent HTTPS filtering of URLs*ÌOption for selective HTTPS Scanning of untrusted sites**ÌAdvanced web malware protectionwith JavaScript emulation*ÌLive Protection real-time in-the-cloud lookupsfor the latest threat intelligenceÌPotentially unwanted application (PUA) download blocking*ÌMalicious URL reputation filtering backed by SophosLabs ÌReputation threshold: set the reputation threshold awebsite requires to be accessible from internal networkÌActive content filter: File extension, MIME type,JavaScript, ActiveX, Java and FlashÌTrue-File-Type detection/scan within archive files**ÌYouTube for Schools enforcementÌSafeSearch enforcementÌGoogle Apps enforcement*Web PolicyÌAuthentication: Active Directory, eDirectory,LDAP, RADIUS, TACACS+ and local databaseÌSingle sign-on: Active Directory,eDirectory, Apple Open DirectoryÌProxy Modes: Standard, (Fully) Transparent, Authenticated, Single sign-on and Transparent with AD SSO*ÌTransparent captive portal with authenticationÌSupport for separate filtering proxies in different modesÌTime, user and group-based access policiesÌBrowsing quota time policies and quota reset option**ÌAllow temporary URL filter overrides with authentication ÌClient Authentication Agent for dedicated per-user tracking ÌCloning of security profilesÌCustomizable user-messages for events in local languages ÌCustom HTTPS verification CA supportÌSetup wizard and context sensitive online helpÌCustomizable block pagesÌCustom categorization to override categoriesor create custom categories*ÌSite tagging for creating custom site categories**ÌAuthentication and filtering options by device typefor iOS, Android, Mac, Windows and others*ÌPolicy testing tool for URLs, times,users and other parameters*Email ProtectionÌReputation service with spam outbreak monitoring based on patented Recurrent-Pattern-Detection technologyÌAdvanced spam detection techniques: RBL, heuristics,SPF checking, BATV, URL scanning, grey listing, RDNS/HELO checks, expression filter and recipient verification ÌBlock spam and malware during the SMTP transaction ÌDetects phishing URLs within e-mailsÌGlobal & per-user domain and address black/white lists ÌRecipient Verification against Active Directory accountÌE-mail scanning with SMTP and POP3 supportÌDual antivirus engines (Sophos & Avira)ÌTrue-File-Type detection/scan within archive files**ÌScan embedded mail formats: Block maliciousand unwanted files with MIME type checkingÌQuarantine unscannable or over-sized messagesÌFilter mail for unlimited domains and mailboxesÌAutomatic signature and pattern updatesÌSophos Live Anti-Virus real-time cloud lookups** Email Encryption and DLPÌPatent-pending SPX encryption for one-way message encryption*ÌRecipient self-registration SPX password management**ÌAdd attachments to SPX secure replies**ÌTransparent en-/decryption and digitalsigning for SMTP e-mailsÌCompletely transparent, no additionalsoftware or client requiredÌSupports S/MIME, OpenPGP, and TLS standardsÌPGP key server supportÌAllows content/virus scanning even for encrypted e-mails ÌCentral management of all keys and certificates- no key or certificate distribution requiredÌDLP engine with automatic scanning of emailsand attachments for sensitive data*ÌPre-packaged sensitive data type contentcontrol lists (CCLs) for PII, PCI, HIPAA, andmore, maintained by SophosLabs*Email ManagementÌUser-quarantine reports mailed outdaily at customizable timesÌLog Management service supportÌCustomizable User Portal for end-usermail management, in 15 languagesÌAnonymization of reporting data to enforce privacy policy ÌOver 50 Integrated reportsÌPDF and CSV exporting of reportsÌCustomizable email footers and disclaimersÌSetup wizard and context sensitive online helpÌEmail header manipulation support**End-User PortalÌSMTP quarantine: view and releasemessages held in quarantineÌSender blacklist/whitelistÌHotspot access informationÌDownload the Sophos Authentication Agent (SAA)ÌDownload remote access clientsoftware and configuration filesÌHTML5 VPN portal for opening clientless VPN connections to predefined hosts using predefined servicesÌDownload HTTPS Proxy CA certificatesVPNÌPPTP, L2TP, SSL, IPsec, HTML5-based and Ciscoclient-based remote user VPNs, as well as IPsec, SSL,Amazon VPC-based site-to-site tunnels and SophosRemote Ethernet Device (RED) plug-and-play VPNÌIPv6 SSL VPN support***VPN IPsec ClientÌAuthentication: Pre-Shared Key (PSK), PKI(X.509), Smartcards, Token and XAUTHÌEncryption: AES (128/192/256), DES, 3DES(112/168), Blowfish, RSA (up to 2048 Bit), DHgroups 1/2/5/14, MD5 and SHA-256/384/512ÌIntelligent split-tunneling for optimum traffic routingÌNAT-traversal supportÌClient-monitor for graphical overview of connection status ÌMultilingual: German, English and FrenchÌIPsec Tunnel BindingVPN SSL ClientÌProven SSL-(TLS)-based securityÌMinimal system requirementsÌProfile support for varying levels of accessÌSupports MD5, SHA, DES, 3DES and AESÌWorks through all firewalls, regardless of proxies and NAT ÌSupport for iOS and AndroidClientless VPNÌTrue clientless HTML5 VPN portal for accessingapplications securely from a browser on any device VPN One-ClickÌEasy setup and installations of every client within minutes ÌDownload of client-software, individual configurationfiles, keys and certificates one click away fromthe Security Gateway end-user portalÌAutomatic installation and configuration of the clientÌNo configuration required by end userVPN REDÌCentral Management of all REDappliances from Sophos UTMÌNo configuration: Automatically connectsthrough a cloud-based provisioning serviceÌSecure encrypted tunnel using digital X.509certificates and AES256- encryptionÌRED sites are fully protected by the Network, Weband Mail security subscriptions of the Central UTM.ÌVirtual Ethernet for reliable transfer ofall traffic between locationsÌIP address management with centrally definedDHCP and DNS Server configurationÌRemotely de-authorize RED devicesafter a select period of inactivityÌCompression of tunnel traffic* (RED50, RED 10 revision 2, 3)ÌVLAN port configuration options* (RED 50)ÌSupport for RED 15w with integrated 802.11n WiFi AP*** Secure Wi-FiÌSimple plug-and-play deployment,automatically appearing in the UTMÌCentral monitor and manage all access points (APs) and wireless clients through the built-in wireless controller ÌIntegrated security: All Wi-Fi traffic isautomatically routed through the UTMÌWireless 802.11 b/g/n at 2.4 GHz and 5GHz (AP 50)ÌPower-over-Ethernet 802.3af (AP 30/50)ÌMultiple SSID support: Up to 8ÌStrong encryption supports state-of-the-artwireless authentication including WPA2-Enterpriseand IEEE 802.1X (RADIUS authentication)ÌWireless guest Internet access with customizablesplash pages on your captive portalÌVoucher-based guest access for daily or weekly access ÌTime-based wireless network accessÌWireless repeating and bridging meshednetwork mode with AP 50ÌHotspot backend authentication support*(RADIUS, TACACS, LDAP, AD)ÌAutomatic channel selection background optimization**ÌMulti-tenant hotspot administration**ÌSupport for HTTPS login support**Web Application Firewall ProtectionÌReverse proxyÌURL hardening engineÌForm hardening engineÌDeep-linking controlÌDirectory traversal preventionÌSQL injection protectionÌCross-site scripting protectionÌDual-antivirus engines (Sophos & Avira)ÌHTTPS (SSL) encryption offloadingÌCookie signing with digital signaturesÌPath-based routingÌOutlook anywhere protocol supportÌReverse authentication (offloading) for form-basedand basic authentication for server access*ÌPersistent session cookie support***Web Application Firewall ManagementÌAuto server discovery scans attachednetworks and identifies web serversÌIntegrated load balancer spreadsvisitors across multiple serversÌPredefined firewall profiles for MicrosoftOutlook Web Access (OWA)ÌQuick server switch allows easy maintenanceÌSkip individual checks in a granular fashion as required ÌMatch requests from source networksor specified target URLsÌSupport for logical and/or operatorsÌAssists compatibility with various configurationsand non-standard deploymentsÌOptions to change WAF performance parameters**ÌUpload custom WAF rules**ÌScan size limit option**ÌAllow/Block IP ranges**ÌWildcard support for server paths**ÌAutomatically append a prefix/suffix for authentication** UTM Endpoint ProtectionÌWindows endpoint protection with SophosAntivirus and device controlÌOn-access, on-demand or scheduled scanningfor malware, viruses, spyware and TrojansÌPUA scanningÌLive Protection Antivirus provides real-time, in-the-cloud lookups for the latest threat intelligenceÌHIPS with suspicious behavior detectionÌWeb protection with malicious site protectionÌDownload scanningÌDevice control including removable storage, optical media, modems, Bluetooth, wireless, infrared and more * New in UTM Accelerated (9.2)** New in UTM Advantage (9.3)*** New in UTM Elevated (9.4)ÌWeb in Endpoint enforcement of web policy and webmalware scanning on the endpoint with full policyand reporting synchronization with the UTMUTM Endpoint ManagementÌFully managed within the UTMÌEasy deployment from the UTM using using our installer ÌMonitor connected endpoints, threat statusand device utilization with full log accessÌAlerts for infected endpoints*SEC Endpoint Integration*ÌI ntegration with Sophos Enterprise ConsoleEndpoint Management provides UTM webpolicy and reporting for Web in EndpointLogging and ReportingÌLogging: Remote syslog, nightly rotation, email/ftp/SMB/SSH archiving and log management serviceÌOn-box reporting: Packet filter, intrusion protection,bandwidth and day/week/month/year scalesÌIdentity-based reportingÌPDF or CSV report exportingÌE xecutive report scheduling and archivingÌR eactive reporting engine crafts reports as you click on data ÌS ave, instantly email or subscribe recipients to any reports ÌP DF and CSV exporting of reportsÌN ightly compression and rotation of logsÌL og file archiving: On-box, FTP, SMB, SSH, Email and Syslog ÌH undreds of on-box reportsÌD aily activity reportingÌU RL filter override reportÌP er-user tracking and auditingÌA nonymization of reporting data to enforce privacy policy ÌF ull transaction log of all activity in human-readable formatUnited Kingdom and Worldwide Sales Tel: +44 (0)8447 671131Email:****************North American SalesToll Free: 1-866-866-2802Email:******************Australia and New Zealand SalesTel: +61 2 9409 9100Email:****************.auAsia SalesTel: +65 62244168Email:********************Oxford, UK | Boston, USA© Copyright 2016. Sophos Ltd. All rights reserved.Registered in England and Wales No. 2096520, The Pentagon, Abingdon Science Park, Abingdon, OX14 3YP, UK Sophos is the registered trademark of Sophos Ltd. All other product and company names mentioned are trademarks or registered trademarks of their respective owners.1129-02.13DD.dsna.simple。

u1080p resolution for sharp imagesu Easy to install with auto zoom/focus lens, wizardand pre-configured modesu Fully configurable quad streamingu IR version with 15 m (50 ft) viewing distanceu Regions of interest and E-PTZThe HD indoor dome cameras from Bosch areprofessional surveillance cameras that provide highquality HD images for demanding security andsurveillance network requirements. These domes aretrue day/night cameras offering excellent performanceday or night.There is a version with a built-in active infraredilluminator that provides high performance in extremelow-light environments.System overviewEasy to install stylish indoor domeIdeal for indoor use, the stylish design is suitable forinstallations where appearance and flexible coverageare important. The varifocal lens allows you to choosethe coverage area to best suit your application. Usingthe proprietary pan/tilt/rotation mechanism, installerscan select the exact field of view. Mounting optionsare numerous, including surface, wall, and suspended-ceiling mounting.The automatic zoom/focus lens wizard makes it easyfor an installer to accurately zoom and focus thecamera for both day and night operation. The wizard isactivated from the PC or from the on-board camerapush button making it easy to choose the workflowthat suits best.The AVF (Automatic Varifocal) feature means that thezoom can be changed without opening the camera.The automatic motorized zoom/focus adjustment with1:1 pixel mapping ensures the camera is alwaysaccurately focused.FunctionsIntelligent Dynamic Noise Reduction reducesbandwidth and storage requirementsThe camera uses Intelligent Dynamic Noise Reductionwhich actively analyzes the contents of a scene andreduces noise artifacts accordingly.The low-noise image and the efficient H.264compression technology provide clear images whilereducing bandwidth and storage by up to 50%compared to other H.264 cameras. This results inreduced-bandwidth streams that still retain a highimage quality and smooth motion. The cameraprovides the most usable image possible by cleverlyoptimizing the detail-to-bandwidth ratio.Area-based encodingArea-based encoding is another feature which reduces bandwidth. Compression parameters for up to eight user-definable regions can be set. This allows uninteresting regions to be highly compressed, leaving more bandwidth for important parts of the scene. Bitrate optimized profileThe average typical optimized bandwidth in kbits/s for various image rates is shown in the table:Multiple streamsThe innovative multi-streaming feature delivers various H.264 streams together with an M‑JPEG stream. These streams facilitate bandwidth-efficient viewing and recording as well as integration with third-party video management systems.Depending on the resolution and frame rate selected for the first stream, the second stream provides a copy of the first stream or a lower resolution stream.The third stream uses the I-frames of the first stream for recording; the fourth stream shows a JPEG image at a maximum of 10 Mbit/s.Regions of interest and E-PTZRegions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan, Tilt and Zoom) controls allow you to select specific areas of the parent image. These regions produce separate streams for remote viewing and recording. These streams, together with the main stream, allow the operator to separately monitor the most interesting part of a scene while still retaining situational awareness.Built-in microphone, two-way audio and audio alarm The camera has a built-in microphone to allow operators to listen in on the monitored area. Two-way audio allows the operator to communicate with visitors or intruders via an external audio line input and output. Audio detection can be used to generate an alarm if needed.If required by local laws, the microphone can be permanently blocked via a secure license key. Tamper and motion detectionA wide range of configuration options is available for alarms signaling camera tampering. A built-in algorithm for detecting movement in the video can also be used for alarm signaling.Storage managementRecording management can be controlled by the Bosch Video Recording Manager (VRM) or the camera can use iSCSI targets directly without any recording software.Edge recordingThe MicroSD card slot supports up to 2 TB of storage capacity. A microSD card can be used for local alarm recording. Pre-alarm recording in RAM reduces recording bandwidth on the network, or — if microSD card recording is used — extends the effective life of the storage medium.Cloud-based servicesThe camera supports time-based or alarm-based JPEG posting to four different accounts. These accounts can address FTP servers or cloud-based storage facilities (for example, Dropbox). Video clips or JPEG images can also be exported to these accounts.Alarms can be set up to trigger an e-mail or SMS notification so you are always aware of abnormal events.Easy installationPower for the camera can be supplied via a Power-over-Ethernet compliant network cable connection. With this configuration, only a single cable connection is required to view, power, and control the camera. Using PoE makes installation easier and more cost-effective, as cameras do not require a local power source.The camera can also be supplied with power from+12 VDC power supplies.For trouble-free network cabling, the camera supports Auto-MDIX which allows the use of straight or cross-over cables.True day/night switchingThe camera incorporates mechanical filter technology for vivid daytime color and exceptional night-time imaging while maintaining sharp focus under all lighting conditions.Hybrid modeAn analog video output enables the camera to operate in hybrid mode. This mode provides simultaneous high resolution HD video streaming and an analog video output via an SMB connector. The hybrid functionality offers an easy migration path from legacy CCTV to a modern IP-based system.Access securityPassword protection with three levels and 802.1x authentication is supported. To secure Web browser access, use HTTPS with a SSL certificate stored in the camera.Complete viewing softwareThere are many ways to access the camera’s features: using a web browser, with the Bosch Video Management System, with the free-of-chargeBosch Video Client or Video Security Client, with the video security mobile app, or via third-party software. Video security appThe Bosch video security mobile app has been developed to enable Anywhere access to HD surveillance images allowing you to view live images from any location. The app is designed to give you complete control of all your cameras, from panning and tilting to zoom and focus functions. It’s like taking your control room with you.This app, together with the separately available Bosch transcoder, will allow you to fully utilize our dynamic transcoding features so you can play back images even over low-bandwidth connections.System integrationThe camera conforms to the ONVIF Profile S, ONVIF Profile Q and ONVIF Profile G specifications. Compliance with these standards guarantees interoperability between network video products regardless of manufacturer.Third-party integrators can easily access the internal feature set of the camera for integration into large projects. Visit the Bosch Integration Partner Program (IPP) website () for more information.HD standardsComplies with the SMPTE 274M-2008 Standard in:–Resolution: 1920x1080–Scan: Progressive–Color representation: complies with ITU-R BT.709–Aspect ratio: 16:9–Frame rate: 25 and 30 frames/sComplies with the SMPTE 296M-2001 Standard in:–Resolution: 1280x720–Scan: Progressive–Color representation: complies with ITU-R BT.709–Aspect ratio: 16:9–Frame rate: 25 and 30 frames/sInstallation/configuration notesDimensions mm (inch)Parts included•Camera•Screw kit•Installation documentation Technical specificationsSensitivity – (3200K, reflectivity 89%, F1.3, 30IRE)Ordering informationFLEXIDOME IP indoor 5000 HDProfessional IP dome camera for indoor HD surveillance. Varifocal 3 to 10 mm f1.3 lens; IDNR; day/ night; H.264 quad-streaming; cloud services; motion/ tamper/audio detection; microphone; 1080pOrder number NIN-51022-V3FLEXIDOME IP indoor 5000 IRProfessional IP dome camera for indoor HD surveillance. Varifocal 3 to 10 mm f1.3 lens; IDNR; day/ night; H.264 quad-streaming; cloud services; motion/ tamper/audio detection; microphone; 1080p; infrared Order number NII-51022-V3FLEXIDOME IP indoor 5000 HDProfessional IP dome camera for indoor HD surveillance. Automatic Varifocal 3 to 10 mm f1.3 lens; DC iris; IDNR; day/night; H.264 quad-streaming; cloud services; motion/tamper/audio detection; microphone; 1080pOrder number NIN-50022-A3FLEXIDOME IP indoor 5000 IRProfessional IP dome camera for indoor HD surveillance. Automatic Varifocal 3 to 10 mm f1.3 lens; DC iris; IDNR; day/night; H.264 quad-streaming; cloud services; motion/tamper/audio detection; microphone; 1080p; infraredOrder number NII-50022-A3AccessoriesNDA-LWMT-DOME Dome Wall MountSturdy wall L-shaped bracket for dome cameras Order number NDA-LWMT-DOMENDA-ADTVEZ-DOME Dome Adapter BracketAdapter bracket (used together with appropriate wall or pipe mount, or surface mount box)Order number NDA-ADTVEZ-DOMEVEZ-A2-WW Wall MountWall mount (Ø145/149 mm) for dome cameras (use together with appropriate dome adapter bracket); whiteOrder number VEZ-A2-WWVEZ-A2-PW Pipe MountPendant pipe mount (Ø145/149 mm) for dome cameras (use together with appropriate dome adapter bracket); whiteOrder number VEZ-A2-PWLTC 9213/01 Pole Mount AdapterFlexible pole mount adapter for camera mounts (use together with the appropriate wall mount bracket). Max. 9 kg (20 lb); 3 to 15 inch diameter pole; stainless steel strapsOrder number LTC 9213/01NDA-FMT-DOME In-ceiling mountIn-ceiling flush mounting kit for dome cameras(Ø157 mm)Order number NDA-FMT-DOMENDA-ADT4S-MINDOME 4S Surface Mount BoxSurface mount box (Ø145 mm / Ø5.71 in) for dome cameras (use together with the appropriate dome adapter bracket).Order number NDA-ADT4S-MINDOMEMonitor/DVR Cable SMB 0.3M0.3 m (1 ft) analog cable, SMB (female) to BNC (female) to connect camera to coaxial cableOrder number NBN-MCSMB-03MMonitor/DVR Cable SMB 3.0M3 m (9 ft) analog cable, SMB (female) to BNC (male) to connect camera to monitor or DVROrder number NBN-MCSMB-30MNPD-5001-POE Midspan PoE InjectorPower-over-Ethernet midspan injector for use with PoE enabled cameras; 15.4 W, 1-portOrder number NPD-5001-POENPD-5004-POE Midspan PoE InjectorPower-over-Ethernet midspan injectors for use with PoE enabled cameras; 15.4 W, 4-portsOrder number NPD-5004-POERepresented by:North America:Europe, Middle East, Africa:Asia-Pacific:China:Latin America and Caribbean:Bosch Security Systems, Inc. 130 Perinton Parkway Fairport, New York, 14450, USA Phone: +1 800 289 0096 Fax: +1 585 223 9180***********************.com Bosch Security Systems B.V.P.O. Box 800025617 BA Eindhoven, The NetherlandsPhone: + 31 40 2577 284Fax: +31 40 2577 330******************************Robert Bosch (SEA) Pte Ltd, SecuritySystems11 Bishan Street 21Singapore 573943Phone: +65 6571 2808Fax: +65 6571 2699*****************************Bosch (Shanghai) Security Systems Ltd.203 Building, No. 333 Fuquan RoadNorth IBPChangning District, Shanghai200335 ChinaPhone +86 21 22181111Fax: +86 21 22182398Robert Bosch Ltda Security Systems DivisionVia Anhanguera, Km 98CEP 13065-900Campinas, Sao Paulo, BrazilPhone: +55 19 2103 2860Fax: +55 19 2103 2862*****************************© Bosch Security Systems 2016 | Data subject to change without notice 188****8507|en,V9,01.Jun2016。

3GPP TS 36.331 V13.2.0 (2016-06)Technical Specification3rd Generation Partnership Project;Technical Specification Group Radio Access Network;Evolved Universal Terrestrial Radio Access (E-UTRA);Radio Resource Control (RRC);Protocol specification(Release 13)The present document has been developed within the 3rd Generation Partnership Project (3GPP TM) and may be further elaborated for the purposes of 3GPP. The present document has not been subject to any approval process by the 3GPP Organizational Partners and shall not be implemented.This Specification is provided for future development work within 3GPP only. The Organizational Partners accept no liability for any use of this Specification. Specifications and reports for implementation of the 3GPP TM system should be obtained via the 3GPP Organizational Partners' Publications Offices.KeywordsUMTS, radio3GPPPostal address3GPP support office address650 Route des Lucioles - Sophia AntipolisValbonne - FRANCETel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16InternetCopyright NotificationNo part may be reproduced except as authorized by written permission.The copyright and the foregoing restriction extend to reproduction in all media.© 2016, 3GPP Organizational Partners (ARIB, ATIS, CCSA, ETSI, TSDSI, TTA, TTC).All rights reserved.UMTS™ is a Trade Mark of ETSI registered for the benefit of its members3GPP™ is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational PartnersLTE™ is a Trade Mark of ETSI currently being registered for the benefit of its Members and of the 3GPP Organizational Partners GSM® and the GSM logo are registered and owned by the GSM AssociationBluetooth® is a Trade Mark of the Bluetooth SIG registered for the benefit of its membersContentsForeword (18)1Scope (19)2References (19)3Definitions, symbols and abbreviations (22)3.1Definitions (22)3.2Abbreviations (24)4General (27)4.1Introduction (27)4.2Architecture (28)4.2.1UE states and state transitions including inter RAT (28)4.2.2Signalling radio bearers (29)4.3Services (30)4.3.1Services provided to upper layers (30)4.3.2Services expected from lower layers (30)4.4Functions (30)5Procedures (32)5.1General (32)5.1.1Introduction (32)5.1.2General requirements (32)5.2System information (33)5.2.1Introduction (33)5.2.1.1General (33)5.2.1.2Scheduling (34)5.2.1.2a Scheduling for NB-IoT (34)5.2.1.3System information validity and notification of changes (35)5.2.1.4Indication of ETWS notification (36)5.2.1.5Indication of CMAS notification (37)5.2.1.6Notification of EAB parameters change (37)5.2.1.7Access Barring parameters change in NB-IoT (37)5.2.2System information acquisition (38)5.2.2.1General (38)5.2.2.2Initiation (38)5.2.2.3System information required by the UE (38)5.2.2.4System information acquisition by the UE (39)5.2.2.5Essential system information missing (42)5.2.2.6Actions upon reception of the MasterInformationBlock message (42)5.2.2.7Actions upon reception of the SystemInformationBlockType1 message (42)5.2.2.8Actions upon reception of SystemInformation messages (44)5.2.2.9Actions upon reception of SystemInformationBlockType2 (44)5.2.2.10Actions upon reception of SystemInformationBlockType3 (45)5.2.2.11Actions upon reception of SystemInformationBlockType4 (45)5.2.2.12Actions upon reception of SystemInformationBlockType5 (45)5.2.2.13Actions upon reception of SystemInformationBlockType6 (45)5.2.2.14Actions upon reception of SystemInformationBlockType7 (45)5.2.2.15Actions upon reception of SystemInformationBlockType8 (45)5.2.2.16Actions upon reception of SystemInformationBlockType9 (46)5.2.2.17Actions upon reception of SystemInformationBlockType10 (46)5.2.2.18Actions upon reception of SystemInformationBlockType11 (46)5.2.2.19Actions upon reception of SystemInformationBlockType12 (47)5.2.2.20Actions upon reception of SystemInformationBlockType13 (48)5.2.2.21Actions upon reception of SystemInformationBlockType14 (48)5.2.2.22Actions upon reception of SystemInformationBlockType15 (48)5.2.2.23Actions upon reception of SystemInformationBlockType16 (48)5.2.2.24Actions upon reception of SystemInformationBlockType17 (48)5.2.2.25Actions upon reception of SystemInformationBlockType18 (48)5.2.2.26Actions upon reception of SystemInformationBlockType19 (49)5.2.3Acquisition of an SI message (49)5.2.3a Acquisition of an SI message by BL UE or UE in CE or a NB-IoT UE (50)5.3Connection control (50)5.3.1Introduction (50)5.3.1.1RRC connection control (50)5.3.1.2Security (52)5.3.1.2a RN security (53)5.3.1.3Connected mode mobility (53)5.3.1.4Connection control in NB-IoT (54)5.3.2Paging (55)5.3.2.1General (55)5.3.2.2Initiation (55)5.3.2.3Reception of the Paging message by the UE (55)5.3.3RRC connection establishment (56)5.3.3.1General (56)5.3.3.1a Conditions for establishing RRC Connection for sidelink communication/ discovery (58)5.3.3.2Initiation (59)5.3.3.3Actions related to transmission of RRCConnectionRequest message (63)5.3.3.3a Actions related to transmission of RRCConnectionResumeRequest message (64)5.3.3.4Reception of the RRCConnectionSetup by the UE (64)5.3.3.4a Reception of the RRCConnectionResume by the UE (66)5.3.3.5Cell re-selection while T300, T302, T303, T305, T306, or T308 is running (68)5.3.3.6T300 expiry (68)5.3.3.7T302, T303, T305, T306, or T308 expiry or stop (69)5.3.3.8Reception of the RRCConnectionReject by the UE (70)5.3.3.9Abortion of RRC connection establishment (71)5.3.3.10Handling of SSAC related parameters (71)5.3.3.11Access barring check (72)5.3.3.12EAB check (73)5.3.3.13Access barring check for ACDC (73)5.3.3.14Access Barring check for NB-IoT (74)5.3.4Initial security activation (75)5.3.4.1General (75)5.3.4.2Initiation (76)5.3.4.3Reception of the SecurityModeCommand by the UE (76)5.3.5RRC connection reconfiguration (77)5.3.5.1General (77)5.3.5.2Initiation (77)5.3.5.3Reception of an RRCConnectionReconfiguration not including the mobilityControlInfo by theUE (77)5.3.5.4Reception of an RRCConnectionReconfiguration including the mobilityControlInfo by the UE(handover) (79)5.3.5.5Reconfiguration failure (83)5.3.5.6T304 expiry (handover failure) (83)5.3.5.7Void (84)5.3.5.7a T307 expiry (SCG change failure) (84)5.3.5.8Radio Configuration involving full configuration option (84)5.3.6Counter check (86)5.3.6.1General (86)5.3.6.2Initiation (86)5.3.6.3Reception of the CounterCheck message by the UE (86)5.3.7RRC connection re-establishment (87)5.3.7.1General (87)5.3.7.2Initiation (87)5.3.7.3Actions following cell selection while T311 is running (88)5.3.7.4Actions related to transmission of RRCConnectionReestablishmentRequest message (89)5.3.7.5Reception of the RRCConnectionReestablishment by the UE (89)5.3.7.6T311 expiry (91)5.3.7.7T301 expiry or selected cell no longer suitable (91)5.3.7.8Reception of RRCConnectionReestablishmentReject by the UE (91)5.3.8RRC connection release (92)5.3.8.1General (92)5.3.8.2Initiation (92)5.3.8.3Reception of the RRCConnectionRelease by the UE (92)5.3.8.4T320 expiry (93)5.3.9RRC connection release requested by upper layers (93)5.3.9.1General (93)5.3.9.2Initiation (93)5.3.10Radio resource configuration (93)5.3.10.0General (93)5.3.10.1SRB addition/ modification (94)5.3.10.2DRB release (95)5.3.10.3DRB addition/ modification (95)5.3.10.3a1DC specific DRB addition or reconfiguration (96)5.3.10.3a2LWA specific DRB addition or reconfiguration (98)5.3.10.3a3LWIP specific DRB addition or reconfiguration (98)5.3.10.3a SCell release (99)5.3.10.3b SCell addition/ modification (99)5.3.10.3c PSCell addition or modification (99)5.3.10.4MAC main reconfiguration (99)5.3.10.5Semi-persistent scheduling reconfiguration (100)5.3.10.6Physical channel reconfiguration (100)5.3.10.7Radio Link Failure Timers and Constants reconfiguration (101)5.3.10.8Time domain measurement resource restriction for serving cell (101)5.3.10.9Other configuration (102)5.3.10.10SCG reconfiguration (103)5.3.10.11SCG dedicated resource configuration (104)5.3.10.12Reconfiguration SCG or split DRB by drb-ToAddModList (105)5.3.10.13Neighbour cell information reconfiguration (105)5.3.10.14Void (105)5.3.10.15Sidelink dedicated configuration (105)5.3.10.16T370 expiry (106)5.3.11Radio link failure related actions (107)5.3.11.1Detection of physical layer problems in RRC_CONNECTED (107)5.3.11.2Recovery of physical layer problems (107)5.3.11.3Detection of radio link failure (107)5.3.12UE actions upon leaving RRC_CONNECTED (109)5.3.13UE actions upon PUCCH/ SRS release request (110)5.3.14Proximity indication (110)5.3.14.1General (110)5.3.14.2Initiation (111)5.3.14.3Actions related to transmission of ProximityIndication message (111)5.3.15Void (111)5.4Inter-RAT mobility (111)5.4.1Introduction (111)5.4.2Handover to E-UTRA (112)5.4.2.1General (112)5.4.2.2Initiation (112)5.4.2.3Reception of the RRCConnectionReconfiguration by the UE (112)5.4.2.4Reconfiguration failure (114)5.4.2.5T304 expiry (handover to E-UTRA failure) (114)5.4.3Mobility from E-UTRA (114)5.4.3.1General (114)5.4.3.2Initiation (115)5.4.3.3Reception of the MobilityFromEUTRACommand by the UE (115)5.4.3.4Successful completion of the mobility from E-UTRA (116)5.4.3.5Mobility from E-UTRA failure (117)5.4.4Handover from E-UTRA preparation request (CDMA2000) (117)5.4.4.1General (117)5.4.4.2Initiation (118)5.4.4.3Reception of the HandoverFromEUTRAPreparationRequest by the UE (118)5.4.5UL handover preparation transfer (CDMA2000) (118)5.4.5.1General (118)5.4.5.2Initiation (118)5.4.5.3Actions related to transmission of the ULHandoverPreparationTransfer message (119)5.4.5.4Failure to deliver the ULHandoverPreparationTransfer message (119)5.4.6Inter-RAT cell change order to E-UTRAN (119)5.4.6.1General (119)5.4.6.2Initiation (119)5.4.6.3UE fails to complete an inter-RAT cell change order (119)5.5Measurements (120)5.5.1Introduction (120)5.5.2Measurement configuration (121)5.5.2.1General (121)5.5.2.2Measurement identity removal (122)5.5.2.2a Measurement identity autonomous removal (122)5.5.2.3Measurement identity addition/ modification (123)5.5.2.4Measurement object removal (124)5.5.2.5Measurement object addition/ modification (124)5.5.2.6Reporting configuration removal (126)5.5.2.7Reporting configuration addition/ modification (127)5.5.2.8Quantity configuration (127)5.5.2.9Measurement gap configuration (127)5.5.2.10Discovery signals measurement timing configuration (128)5.5.2.11RSSI measurement timing configuration (128)5.5.3Performing measurements (128)5.5.3.1General (128)5.5.3.2Layer 3 filtering (131)5.5.4Measurement report triggering (131)5.5.4.1General (131)5.5.4.2Event A1 (Serving becomes better than threshold) (135)5.5.4.3Event A2 (Serving becomes worse than threshold) (136)5.5.4.4Event A3 (Neighbour becomes offset better than PCell/ PSCell) (136)5.5.4.5Event A4 (Neighbour becomes better than threshold) (137)5.5.4.6Event A5 (PCell/ PSCell becomes worse than threshold1 and neighbour becomes better thanthreshold2) (138)5.5.4.6a Event A6 (Neighbour becomes offset better than SCell) (139)5.5.4.7Event B1 (Inter RAT neighbour becomes better than threshold) (139)5.5.4.8Event B2 (PCell becomes worse than threshold1 and inter RAT neighbour becomes better thanthreshold2) (140)5.5.4.9Event C1 (CSI-RS resource becomes better than threshold) (141)5.5.4.10Event C2 (CSI-RS resource becomes offset better than reference CSI-RS resource) (141)5.5.4.11Event W1 (WLAN becomes better than a threshold) (142)5.5.4.12Event W2 (All WLAN inside WLAN mobility set becomes worse than threshold1 and a WLANoutside WLAN mobility set becomes better than threshold2) (142)5.5.4.13Event W3 (All WLAN inside WLAN mobility set becomes worse than a threshold) (143)5.5.5Measurement reporting (144)5.5.6Measurement related actions (148)5.5.6.1Actions upon handover and re-establishment (148)5.5.6.2Speed dependant scaling of measurement related parameters (149)5.5.7Inter-frequency RSTD measurement indication (149)5.5.7.1General (149)5.5.7.2Initiation (150)5.5.7.3Actions related to transmission of InterFreqRSTDMeasurementIndication message (150)5.6Other (150)5.6.0General (150)5.6.1DL information transfer (151)5.6.1.1General (151)5.6.1.2Initiation (151)5.6.1.3Reception of the DLInformationTransfer by the UE (151)5.6.2UL information transfer (151)5.6.2.1General (151)5.6.2.2Initiation (151)5.6.2.3Actions related to transmission of ULInformationTransfer message (152)5.6.2.4Failure to deliver ULInformationTransfer message (152)5.6.3UE capability transfer (152)5.6.3.1General (152)5.6.3.2Initiation (153)5.6.3.3Reception of the UECapabilityEnquiry by the UE (153)5.6.4CSFB to 1x Parameter transfer (157)5.6.4.1General (157)5.6.4.2Initiation (157)5.6.4.3Actions related to transmission of CSFBParametersRequestCDMA2000 message (157)5.6.4.4Reception of the CSFBParametersResponseCDMA2000 message (157)5.6.5UE Information (158)5.6.5.1General (158)5.6.5.2Initiation (158)5.6.5.3Reception of the UEInformationRequest message (158)5.6.6 Logged Measurement Configuration (159)5.6.6.1General (159)5.6.6.2Initiation (160)5.6.6.3Reception of the LoggedMeasurementConfiguration by the UE (160)5.6.6.4T330 expiry (160)5.6.7 Release of Logged Measurement Configuration (160)5.6.7.1General (160)5.6.7.2Initiation (160)5.6.8 Measurements logging (161)5.6.8.1General (161)5.6.8.2Initiation (161)5.6.9In-device coexistence indication (163)5.6.9.1General (163)5.6.9.2Initiation (164)5.6.9.3Actions related to transmission of InDeviceCoexIndication message (164)5.6.10UE Assistance Information (165)5.6.10.1General (165)5.6.10.2Initiation (166)5.6.10.3Actions related to transmission of UEAssistanceInformation message (166)5.6.11 Mobility history information (166)5.6.11.1General (166)5.6.11.2Initiation (166)5.6.12RAN-assisted WLAN interworking (167)5.6.12.1General (167)5.6.12.2Dedicated WLAN offload configuration (167)5.6.12.3WLAN offload RAN evaluation (167)5.6.12.4T350 expiry or stop (167)5.6.12.5Cell selection/ re-selection while T350 is running (168)5.6.13SCG failure information (168)5.6.13.1General (168)5.6.13.2Initiation (168)5.6.13.3Actions related to transmission of SCGFailureInformation message (168)5.6.14LTE-WLAN Aggregation (169)5.6.14.1Introduction (169)5.6.14.2Reception of LWA configuration (169)5.6.14.3Release of LWA configuration (170)5.6.15WLAN connection management (170)5.6.15.1Introduction (170)5.6.15.2WLAN connection status reporting (170)5.6.15.2.1General (170)5.6.15.2.2Initiation (171)5.6.15.2.3Actions related to transmission of WLANConnectionStatusReport message (171)5.6.15.3T351 Expiry (WLAN connection attempt timeout) (171)5.6.15.4WLAN status monitoring (171)5.6.16RAN controlled LTE-WLAN interworking (172)5.6.16.1General (172)5.6.16.2WLAN traffic steering command (172)5.6.17LTE-WLAN aggregation with IPsec tunnel (173)5.6.17.1General (173)5.7Generic error handling (174)5.7.1General (174)5.7.2ASN.1 violation or encoding error (174)5.7.3Field set to a not comprehended value (174)5.7.4Mandatory field missing (174)5.7.5Not comprehended field (176)5.8MBMS (176)5.8.1Introduction (176)5.8.1.1General (176)5.8.1.2Scheduling (176)5.8.1.3MCCH information validity and notification of changes (176)5.8.2MCCH information acquisition (178)5.8.2.1General (178)5.8.2.2Initiation (178)5.8.2.3MCCH information acquisition by the UE (178)5.8.2.4Actions upon reception of the MBSFNAreaConfiguration message (178)5.8.2.5Actions upon reception of the MBMSCountingRequest message (179)5.8.3MBMS PTM radio bearer configuration (179)5.8.3.1General (179)5.8.3.2Initiation (179)5.8.3.3MRB establishment (179)5.8.3.4MRB release (179)5.8.4MBMS Counting Procedure (179)5.8.4.1General (179)5.8.4.2Initiation (180)5.8.4.3Reception of the MBMSCountingRequest message by the UE (180)5.8.5MBMS interest indication (181)5.8.5.1General (181)5.8.5.2Initiation (181)5.8.5.3Determine MBMS frequencies of interest (182)5.8.5.4Actions related to transmission of MBMSInterestIndication message (183)5.8a SC-PTM (183)5.8a.1Introduction (183)5.8a.1.1General (183)5.8a.1.2SC-MCCH scheduling (183)5.8a.1.3SC-MCCH information validity and notification of changes (183)5.8a.1.4Procedures (184)5.8a.2SC-MCCH information acquisition (184)5.8a.2.1General (184)5.8a.2.2Initiation (184)5.8a.2.3SC-MCCH information acquisition by the UE (184)5.8a.2.4Actions upon reception of the SCPTMConfiguration message (185)5.8a.3SC-PTM radio bearer configuration (185)5.8a.3.1General (185)5.8a.3.2Initiation (185)5.8a.3.3SC-MRB establishment (185)5.8a.3.4SC-MRB release (185)5.9RN procedures (186)5.9.1RN reconfiguration (186)5.9.1.1General (186)5.9.1.2Initiation (186)5.9.1.3Reception of the RNReconfiguration by the RN (186)5.10Sidelink (186)5.10.1Introduction (186)5.10.1a Conditions for sidelink communication operation (187)5.10.2Sidelink UE information (188)5.10.2.1General (188)5.10.2.2Initiation (189)5.10.2.3Actions related to transmission of SidelinkUEInformation message (193)5.10.3Sidelink communication monitoring (195)5.10.6Sidelink discovery announcement (198)5.10.6a Sidelink discovery announcement pool selection (201)5.10.6b Sidelink discovery announcement reference carrier selection (201)5.10.7Sidelink synchronisation information transmission (202)5.10.7.1General (202)5.10.7.2Initiation (203)5.10.7.3Transmission of SLSS (204)5.10.7.4Transmission of MasterInformationBlock-SL message (205)5.10.7.5Void (206)5.10.8Sidelink synchronisation reference (206)5.10.8.1General (206)5.10.8.2Selection and reselection of synchronisation reference UE (SyncRef UE) (206)5.10.9Sidelink common control information (207)5.10.9.1General (207)5.10.9.2Actions related to reception of MasterInformationBlock-SL message (207)5.10.10Sidelink relay UE operation (207)5.10.10.1General (207)5.10.10.2AS-conditions for relay related sidelink communication transmission by sidelink relay UE (207)5.10.10.3AS-conditions for relay PS related sidelink discovery transmission by sidelink relay UE (208)5.10.10.4Sidelink relay UE threshold conditions (208)5.10.11Sidelink remote UE operation (208)5.10.11.1General (208)5.10.11.2AS-conditions for relay related sidelink communication transmission by sidelink remote UE (208)5.10.11.3AS-conditions for relay PS related sidelink discovery transmission by sidelink remote UE (209)5.10.11.4Selection and reselection of sidelink relay UE (209)5.10.11.5Sidelink remote UE threshold conditions (210)6Protocol data units, formats and parameters (tabular & ASN.1) (210)6.1General (210)6.2RRC messages (212)6.2.1General message structure (212)–EUTRA-RRC-Definitions (212)–BCCH-BCH-Message (212)–BCCH-DL-SCH-Message (212)–BCCH-DL-SCH-Message-BR (213)–MCCH-Message (213)–PCCH-Message (213)–DL-CCCH-Message (214)–DL-DCCH-Message (214)–UL-CCCH-Message (214)–UL-DCCH-Message (215)–SC-MCCH-Message (215)6.2.2Message definitions (216)–CounterCheck (216)–CounterCheckResponse (217)–CSFBParametersRequestCDMA2000 (217)–CSFBParametersResponseCDMA2000 (218)–DLInformationTransfer (218)–HandoverFromEUTRAPreparationRequest (CDMA2000) (219)–InDeviceCoexIndication (220)–InterFreqRSTDMeasurementIndication (222)–LoggedMeasurementConfiguration (223)–MasterInformationBlock (225)–MBMSCountingRequest (226)–MBMSCountingResponse (226)–MBMSInterestIndication (227)–MBSFNAreaConfiguration (228)–MeasurementReport (228)–MobilityFromEUTRACommand (229)–Paging (232)–ProximityIndication (233)–RNReconfiguration (234)–RNReconfigurationComplete (234)–RRCConnectionReconfiguration (235)–RRCConnectionReconfigurationComplete (240)–RRCConnectionReestablishment (241)–RRCConnectionReestablishmentComplete (241)–RRCConnectionReestablishmentReject (242)–RRCConnectionReestablishmentRequest (243)–RRCConnectionReject (243)–RRCConnectionRelease (244)–RRCConnectionResume (248)–RRCConnectionResumeComplete (249)–RRCConnectionResumeRequest (250)–RRCConnectionRequest (250)–RRCConnectionSetup (251)–RRCConnectionSetupComplete (252)–SCGFailureInformation (253)–SCPTMConfiguration (254)–SecurityModeCommand (255)–SecurityModeComplete (255)–SecurityModeFailure (256)–SidelinkUEInformation (256)–SystemInformation (258)–SystemInformationBlockType1 (259)–UEAssistanceInformation (264)–UECapabilityEnquiry (265)–UECapabilityInformation (266)–UEInformationRequest (267)–UEInformationResponse (267)–ULHandoverPreparationTransfer (CDMA2000) (273)–ULInformationTransfer (274)–WLANConnectionStatusReport (274)6.3RRC information elements (275)6.3.1System information blocks (275)–SystemInformationBlockType2 (275)–SystemInformationBlockType3 (279)–SystemInformationBlockType4 (282)–SystemInformationBlockType5 (283)–SystemInformationBlockType6 (287)–SystemInformationBlockType7 (289)–SystemInformationBlockType8 (290)–SystemInformationBlockType9 (295)–SystemInformationBlockType10 (295)–SystemInformationBlockType11 (296)–SystemInformationBlockType12 (297)–SystemInformationBlockType13 (297)–SystemInformationBlockType14 (298)–SystemInformationBlockType15 (298)–SystemInformationBlockType16 (299)–SystemInformationBlockType17 (300)–SystemInformationBlockType18 (301)–SystemInformationBlockType19 (301)–SystemInformationBlockType20 (304)6.3.2Radio resource control information elements (304)–AntennaInfo (304)–AntennaInfoUL (306)–CQI-ReportConfig (307)–CQI-ReportPeriodicProcExtId (314)–CrossCarrierSchedulingConfig (314)–CSI-IM-Config (315)–CSI-IM-ConfigId (315)–CSI-RS-Config (317)–CSI-RS-ConfigEMIMO (318)–CSI-RS-ConfigNZP (319)–CSI-RS-ConfigNZPId (320)–CSI-RS-ConfigZP (321)–CSI-RS-ConfigZPId (321)–DMRS-Config (321)–DRB-Identity (322)–EPDCCH-Config (322)–EIMTA-MainConfig (324)–LogicalChannelConfig (325)–LWA-Configuration (326)–LWIP-Configuration (326)–RCLWI-Configuration (327)–MAC-MainConfig (327)–P-C-AndCBSR (332)–PDCCH-ConfigSCell (333)–PDCP-Config (334)–PDSCH-Config (337)–PDSCH-RE-MappingQCL-ConfigId (339)–PHICH-Config (339)–PhysicalConfigDedicated (339)–P-Max (344)–PRACH-Config (344)–PresenceAntennaPort1 (346)–PUCCH-Config (347)–PUSCH-Config (351)–RACH-ConfigCommon (355)–RACH-ConfigDedicated (357)–RadioResourceConfigCommon (358)–RadioResourceConfigDedicated (362)–RLC-Config (367)–RLF-TimersAndConstants (369)–RN-SubframeConfig (370)–SchedulingRequestConfig (371)–SoundingRS-UL-Config (372)–SPS-Config (375)–TDD-Config (376)–TimeAlignmentTimer (377)–TPC-PDCCH-Config (377)–TunnelConfigLWIP (378)–UplinkPowerControl (379)–WLAN-Id-List (382)–WLAN-MobilityConfig (382)6.3.3Security control information elements (382)–NextHopChainingCount (382)–SecurityAlgorithmConfig (383)–ShortMAC-I (383)6.3.4Mobility control information elements (383)–AdditionalSpectrumEmission (383)–ARFCN-ValueCDMA2000 (383)–ARFCN-ValueEUTRA (384)–ARFCN-ValueGERAN (384)–ARFCN-ValueUTRA (384)–BandclassCDMA2000 (384)–BandIndicatorGERAN (385)–CarrierFreqCDMA2000 (385)–CarrierFreqGERAN (385)–CellIndexList (387)–CellReselectionPriority (387)–CellSelectionInfoCE (387)–CellReselectionSubPriority (388)–CSFB-RegistrationParam1XRTT (388)–CellGlobalIdEUTRA (389)–CellGlobalIdUTRA (389)–CellGlobalIdGERAN (390)–CellGlobalIdCDMA2000 (390)–CellSelectionInfoNFreq (391)–CSG-Identity (391)–FreqBandIndicator (391)–MobilityControlInfo (391)–MobilityParametersCDMA2000 (1xRTT) (393)–MobilityStateParameters (394)–MultiBandInfoList (394)–NS-PmaxList (394)–PhysCellId (395)–PhysCellIdRange (395)–PhysCellIdRangeUTRA-FDDList (395)–PhysCellIdCDMA2000 (396)–PhysCellIdGERAN (396)–PhysCellIdUTRA-FDD (396)–PhysCellIdUTRA-TDD (396)–PLMN-Identity (397)–PLMN-IdentityList3 (397)–PreRegistrationInfoHRPD (397)–Q-QualMin (398)–Q-RxLevMin (398)–Q-OffsetRange (398)–Q-OffsetRangeInterRAT (399)–ReselectionThreshold (399)–ReselectionThresholdQ (399)–SCellIndex (399)–ServCellIndex (400)–SpeedStateScaleFactors (400)–SystemInfoListGERAN (400)–SystemTimeInfoCDMA2000 (401)–TrackingAreaCode (401)–T-Reselection (402)–T-ReselectionEUTRA-CE (402)6.3.5Measurement information elements (402)–AllowedMeasBandwidth (402)–CSI-RSRP-Range (402)–Hysteresis (402)–LocationInfo (403)–MBSFN-RSRQ-Range (403)–MeasConfig (404)–MeasDS-Config (405)–MeasGapConfig (406)–MeasId (407)–MeasIdToAddModList (407)–MeasObjectCDMA2000 (408)–MeasObjectEUTRA (408)–MeasObjectGERAN (412)–MeasObjectId (412)–MeasObjectToAddModList (412)–MeasObjectUTRA (413)–ReportConfigEUTRA (422)–ReportConfigId (425)–ReportConfigInterRAT (425)–ReportConfigToAddModList (428)–ReportInterval (429)–RSRP-Range (429)–RSRQ-Range (430)–RSRQ-Type (430)–RS-SINR-Range (430)–RSSI-Range-r13 (431)–TimeToTrigger (431)–UL-DelayConfig (431)–WLAN-CarrierInfo (431)–WLAN-RSSI-Range (432)–WLAN-Status (432)6.3.6Other information elements (433)–AbsoluteTimeInfo (433)–AreaConfiguration (433)–C-RNTI (433)–DedicatedInfoCDMA2000 (434)–DedicatedInfoNAS (434)–FilterCoefficient (434)–LoggingDuration (434)–LoggingInterval (435)–MeasSubframePattern (435)–MMEC (435)–NeighCellConfig (435)–OtherConfig (436)–RAND-CDMA2000 (1xRTT) (437)–RAT-Type (437)–ResumeIdentity (437)–RRC-TransactionIdentifier (438)–S-TMSI (438)–TraceReference (438)–UE-CapabilityRAT-ContainerList (438)–UE-EUTRA-Capability (439)–UE-RadioPagingInfo (469)–UE-TimersAndConstants (469)–VisitedCellInfoList (470)–WLAN-OffloadConfig (470)6.3.7MBMS information elements (472)–MBMS-NotificationConfig (472)–MBMS-ServiceList (473)–MBSFN-AreaId (473)–MBSFN-AreaInfoList (473)–MBSFN-SubframeConfig (474)–PMCH-InfoList (475)6.3.7a SC-PTM information elements (476)–SC-MTCH-InfoList (476)–SCPTM-NeighbourCellList (478)6.3.8Sidelink information elements (478)–SL-CommConfig (478)–SL-CommResourcePool (479)–SL-CP-Len (480)–SL-DiscConfig (481)–SL-DiscResourcePool (483)–SL-DiscTxPowerInfo (485)–SL-GapConfig (485)。

The information in this document is subject to change without notice and does not represent a commitment on the part of Native Instruments GmbH. The software described by this docu-ment is subject to a License Agreement and may not be copied to other media. No part of this publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose, without prior written permission by Native Instruments GmbH, hereinafter referred to as Native Instruments.“Native Instruments”, “NI” and associated logos are (registered) trademarks of Native Instru-ments GmbH.ASIO, VST, HALion and Cubase are registered trademarks of Steinberg Media Technologies GmbH.All other product and company names are trademarks™ or registered® trademarks of their re-spective holders. Use of them does not imply any affiliation with or endorsement by them.Document authored by: David Gover and Nico Sidi.Software version: 2.8 (02/2019)Hardware version: MASCHINE MIKRO MK3Special thanks to the Beta Test Team, who were invaluable not just in tracking down bugs, but in making this a better product.NATIVE INSTRUMENTS GmbH Schlesische Str. 29-30D-10997 Berlin Germanywww.native-instruments.de NATIVE INSTRUMENTS North America, Inc. 6725 Sunset Boulevard5th FloorLos Angeles, CA 90028USANATIVE INSTRUMENTS K.K.YO Building 3FJingumae 6-7-15, Shibuya-ku, Tokyo 150-0001Japanwww.native-instruments.co.jp NATIVE INSTRUMENTS UK Limited 18 Phipp StreetLondon EC2A 4NUUKNATIVE INSTRUMENTS FRANCE SARL 113 Rue Saint-Maur75011 ParisFrance SHENZHEN NATIVE INSTRUMENTS COMPANY Limited 5F, Shenzhen Zimao Center111 Taizi Road, Nanshan District, Shenzhen, GuangdongChina© NATIVE INSTRUMENTS GmbH, 2019. All rights reserved.Table of Contents1Welcome to MASCHINE (23)1.1MASCHINE Documentation (24)1.2Document Conventions (25)1.3New Features in MASCHINE 2.8 (26)1.4New Features in MASCHINE 2.7.10 (28)1.5New Features in MASCHINE 2.7.8 (29)1.6New Features in MASCHINE 2.7.7 (29)1.7New Features in MASCHINE 2.7.4 (31)1.8New Features in MASCHINE 2.7.3 (33)2Quick Reference (35)2.1MASCHINE Project Overview (35)2.1.1Sound Content (35)2.1.2Arrangement (37)2.2MASCHINE Hardware Overview (40)2.2.1MASCHINE MIKRO Hardware Overview (40)2.2.1.1Browser Section (41)2.2.1.2Edit Section (42)2.2.1.3Performance Section (43)2.2.1.4Transport Section (45)2.2.1.5Pad Section (46)2.2.1.6Rear Panel (50)2.3MASCHINE Software Overview (51)2.3.1Header (52)2.3.2Browser (54)2.3.3Arranger (56)2.3.4Control Area (59)2.3.5Pattern Editor (60)3Basic Concepts (62)3.1Important Names and Concepts (62)3.2Adjusting the MASCHINE User Interface (65)3.2.1Adjusting the Size of the Interface (65)3.2.2Switching between Ideas View and Song View (66)3.2.3Showing/Hiding the Browser (67)3.2.4Showing/Hiding the Control Lane (67)3.3Common Operations (68)3.3.1Adjusting Volume, Swing, and Tempo (68)3.3.2Undo/Redo (71)3.3.3Focusing on a Group or a Sound (73)3.3.4Switching Between the Master, Group, and Sound Level (77)3.3.5Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control Area.773.3.6Navigating the Software Using the Controller (82)3.3.7Using Two or More Hardware Controllers (82)3.3.8Loading a Recent Project from the Controller (84)3.4Native Kontrol Standard (85)3.5Stand-Alone and Plug-in Mode (86)3.5.1Differences between Stand-Alone and Plug-in Mode (86)3.5.2Switching Instances (88)3.6Preferences (88)3.6.1Preferences – General Page (89)3.6.2Preferences – Audio Page (93)3.6.3Preferences – MIDI Page (95)3.6.4Preferences – Default Page (97)3.6.5Preferences – Library Page (101)3.6.6Preferences – Plug-ins Page (109)3.6.7Preferences – Hardware Page (114)3.6.8Preferences – Colors Page (114)3.7Integrating MASCHINE into a MIDI Setup (117)3.7.1Connecting External MIDI Equipment (117)3.7.2Sync to External MIDI Clock (117)3.7.3Send MIDI Clock (118)3.7.4Using MIDI Mode (119)3.8Syncing MASCHINE using Ableton Link (120)3.8.1Connecting to a Network (121)3.8.2Joining and Leaving a Link Session (121)4Browser (123)4.1Browser Basics (123)4.1.1The MASCHINE Library (123)4.1.2Browsing the Library vs. Browsing Your Hard Disks (124)4.2Searching and Loading Files from the Library (125)4.2.1Overview of the Library Pane (125)4.2.2Selecting or Loading a Product and Selecting a Bank from the Browser (128)4.2.3Selecting a Product Category, a Product, a Bank, and a Sub-Bank (133)4.2.3.1Selecting a Product Category, a Product, a Bank, and a Sub-Bank on theController (137)4.2.4Selecting a File Type (137)4.2.5Choosing Between Factory and User Content (138)4.2.6Selecting Type and Character Tags (138)4.2.7Performing a Text Search (142)4.2.8Loading a File from the Result List (143)4.3Additional Browsing Tools (148)4.3.1Loading the Selected Files Automatically (148)4.3.2Auditioning Instrument Presets (149)4.3.3Auditioning Samples (150)4.3.4Loading Groups with Patterns (150)4.3.5Loading Groups with Routing (151)4.3.6Displaying File Information (151)4.4Using Favorites in the Browser (152)4.5Editing the Files’ Tags and Properties (155)4.5.1Attribute Editor Basics (155)4.5.2The Bank Page (157)4.5.3The Types and Characters Pages (157)4.5.4The Properties Page (160)4.6Loading and Importing Files from Your File System (161)4.6.1Overview of the FILES Pane (161)4.6.2Using Favorites (163)4.6.3Using the Location Bar (164)4.6.4Navigating to Recent Locations (165)4.6.5Using the Result List (166)4.6.6Importing Files to the MASCHINE Library (169)4.7Locating Missing Samples (171)4.8Using Quick Browse (173)5Managing Sounds, Groups, and Your Project (175)5.1Overview of the Sounds, Groups, and Master (175)5.1.1The Sound, Group, and Master Channels (176)5.1.2Similarities and Differences in Handling Sounds and Groups (177)5.1.3Selecting Multiple Sounds or Groups (178)5.2Managing Sounds (181)5.2.1Loading Sounds (183)5.2.2Pre-listening to Sounds (184)5.2.3Renaming Sound Slots (185)5.2.4Changing the Sound’s Color (186)5.2.5Saving Sounds (187)5.2.6Copying and Pasting Sounds (189)5.2.7Moving Sounds (192)5.2.8Resetting Sound Slots (193)5.3Managing Groups (194)5.3.1Creating Groups (196)5.3.2Loading Groups (197)5.3.3Renaming Groups (198)5.3.4Changing the Group’s Color (199)5.3.5Saving Groups (200)5.3.6Copying and Pasting Groups (202)5.3.7Reordering Groups (206)5.3.8Deleting Groups (207)5.4Exporting MASCHINE Objects and Audio (208)5.4.1Saving a Group with its Samples (208)5.4.2Saving a Project with its Samples (210)5.4.3Exporting Audio (212)5.5Importing Third-Party File Formats (218)5.5.1Loading REX Files into Sound Slots (218)5.5.2Importing MPC Programs to Groups (219)6Playing on the Controller (223)6.1Adjusting the Pads (223)6.1.1The Pad View in the Software (223)6.1.2Choosing a Pad Input Mode (225)6.1.3Adjusting the Base Key (226)6.2Adjusting the Key, Choke, and Link Parameters for Multiple Sounds (227)6.3Playing Tools (229)6.3.1Mute and Solo (229)6.3.2Choke All Notes (233)6.3.3Groove (233)6.3.4Level, Tempo, Tune, and Groove Shortcuts on Your Controller (235)6.3.5Tap Tempo (235)6.4Performance Features (236)6.4.1Overview of the Perform Features (236)6.4.2Selecting a Scale and Creating Chords (239)6.4.3Scale and Chord Parameters (240)6.4.4Creating Arpeggios and Repeated Notes (253)6.4.5Swing on Note Repeat / Arp Output (257)6.5Using Lock Snapshots (257)6.5.1Creating a Lock Snapshot (257)7Working with Plug-ins (259)7.1Plug-in Overview (259)7.1.1Plug-in Basics (259)7.1.2First Plug-in Slot of Sounds: Choosing the Sound’s Role (263)7.1.3Loading, Removing, and Replacing a Plug-in (264)7.1.4Adjusting the Plug-in Parameters (270)7.1.5Bypassing Plug-in Slots (270)7.1.6Using Side-Chain (272)7.1.7Moving Plug-ins (272)7.1.8Alternative: the Plug-in Strip (273)7.1.9Saving and Recalling Plug-in Presets (273)7.1.9.1Saving Plug-in Presets (274)7.1.9.2Recalling Plug-in Presets (275)7.1.9.3Removing a Default Plug-in Preset (276)7.2The Sampler Plug-in (277)7.2.1Page 1: Voice Settings / Engine (279)7.2.2Page 2: Pitch / Envelope (281)7.2.3Page 3: FX / Filter (283)7.2.4Page 4: Modulation (285)7.2.5Page 5: LFO (286)7.2.6Page 6: Velocity / Modwheel (288)7.3Using Native Instruments and External Plug-ins (289)7.3.1Opening/Closing Plug-in Windows (289)7.3.2Using the VST/AU Plug-in Parameters (292)7.3.3Setting Up Your Own Parameter Pages (293)7.3.4Using VST/AU Plug-in Presets (298)7.3.5Multiple-Output Plug-ins and Multitimbral Plug-ins (300)8Using the Audio Plug-in (302)8.1Loading a Loop into the Audio Plug-in (306)8.2Editing Audio in the Audio Plug-in (307)8.3Using Loop Mode (308)8.4Using Gate Mode (310)9Using the Drumsynths (312)9.1Drumsynths – General Handling (313)9.1.1Engines: Many Different Drums per Drumsynth (313)9.1.2Common Parameter Organization (313)9.1.3Shared Parameters (316)9.1.4Various Velocity Responses (316)9.1.5Pitch Range, Tuning, and MIDI Notes (316)9.2The Kicks (317)9.2.1Kick – Sub (319)9.2.2Kick – Tronic (321)9.2.3Kick – Dusty (324)9.2.4Kick – Grit (325)9.2.5Kick – Rasper (328)9.2.6Kick – Snappy (329)9.2.7Kick – Bold (331)9.2.8Kick – Maple (333)9.2.9Kick – Push (334)9.3The Snares (336)9.3.1Snare – Volt (338)9.3.2Snare – Bit (340)9.3.3Snare – Pow (342)9.3.4Snare – Sharp (343)9.3.5Snare – Airy (345)9.3.6Snare – Vintage (347)9.3.7Snare – Chrome (349)9.3.8Snare – Iron (351)9.3.9Snare – Clap (353)9.3.10Snare – Breaker (355)9.4The Hi-hats (357)9.4.1Hi-hat – Silver (358)9.4.2Hi-hat – Circuit (360)9.4.3Hi-hat – Memory (362)9.4.4Hi-hat – Hybrid (364)9.4.5Creating a Pattern with Closed and Open Hi-hats (366)9.5The Toms (367)9.5.1Tom – Tronic (369)9.5.2Tom – Fractal (371)9.5.3Tom – Floor (375)9.5.4Tom – High (377)9.6The Percussions (378)9.6.1Percussion – Fractal (380)9.6.2Percussion – Kettle (383)9.6.3Percussion – Shaker (385)9.7The Cymbals (389)9.7.1Cymbal – Crash (391)9.7.2Cymbal – Ride (393)10Using the Bass Synth (396)10.1Bass Synth – General Handling (397)10.1.1Parameter Organization (397)10.1.2Bass Synth Parameters (399)11Working with Patterns (401)11.1Pattern Basics (401)11.1.1Pattern Editor Overview (402)11.1.2Navigating the Event Area (404)11.1.3Following the Playback Position in the Pattern (406)11.1.4Jumping to Another Playback Position in the Pattern (407)11.1.5Group View and Keyboard View (408)11.1.6Adjusting the Arrange Grid and the Pattern Length (410)11.1.7Adjusting the Step Grid and the Nudge Grid (413)11.2Recording Patterns in Real Time (416)11.2.1Recording Your Patterns Live (417)11.2.2Using the Metronome (419)11.2.3Recording with Count-in (420)11.3Recording Patterns with the Step Sequencer (422)11.3.1Step Mode Basics (422)11.3.2Editing Events in Step Mode (424)11.4Editing Events (425)11.4.1Editing Events with the Mouse: an Overview (425)11.4.2Creating Events/Notes (428)11.4.3Selecting Events/Notes (429)11.4.4Editing Selected Events/Notes (431)11.4.5Deleting Events/Notes (434)11.4.6Cut, Copy, and Paste Events/Notes (436)11.4.7Quantizing Events/Notes (439)11.4.8Quantization While Playing (441)11.4.9Doubling a Pattern (442)11.4.10Adding Variation to Patterns (442)11.5Recording and Editing Modulation (443)11.5.1Which Parameters Are Modulatable? (444)11.5.2Recording Modulation (446)11.5.3Creating and Editing Modulation in the Control Lane (447)11.6Creating MIDI Tracks from Scratch in MASCHINE (452)11.7Managing Patterns (454)11.7.1The Pattern Manager and Pattern Mode (455)11.7.2Selecting Patterns and Pattern Banks (456)11.7.3Creating Patterns (459)11.7.4Deleting Patterns (460)11.7.5Creating and Deleting Pattern Banks (461)11.7.6Naming Patterns (463)11.7.7Changing the Pattern’s Color (465)11.7.8Duplicating, Copying, and Pasting Patterns (466)11.7.9Moving Patterns (469)11.8Importing/Exporting Audio and MIDI to/from Patterns (470)11.8.1Exporting Audio from Patterns (470)11.8.2Exporting MIDI from Patterns (472)11.8.3Importing MIDI to Patterns (474)12Audio Routing, Remote Control, and Macro Controls (483)12.1Audio Routing in MASCHINE (484)12.1.1Sending External Audio to Sounds (485)12.1.2Configuring the Main Output of Sounds and Groups (489)12.1.3Setting Up Auxiliary Outputs for Sounds and Groups (494)12.1.4Configuring the Master and Cue Outputs of MASCHINE (497)12.1.5Mono Audio Inputs (502)12.1.5.1Configuring External Inputs for Sounds in Mix View (503)12.2Using MIDI Control and Host Automation (506)12.2.1Triggering Sounds via MIDI Notes (507)12.2.2Triggering Scenes via MIDI (513)12.2.3Controlling Parameters via MIDI and Host Automation (514)12.2.4Selecting VST/AU Plug-in Presets via MIDI Program Change (522)12.2.5Sending MIDI from Sounds (523)12.3Creating Custom Sets of Parameters with the Macro Controls (527)12.3.1Macro Control Overview (527)12.3.2Assigning Macro Controls Using the Software (528)13Controlling Your Mix (535)13.1Mix View Basics (535)13.1.1Switching between Arrange View and Mix View (535)13.1.2Mix View Elements (536)13.2The Mixer (537)13.2.1Displaying Groups vs. Displaying Sounds (539)13.2.2Adjusting the Mixer Layout (541)13.2.3Selecting Channel Strips (542)13.2.4Managing Your Channels in the Mixer (543)13.2.5Adjusting Settings in the Channel Strips (545)13.2.6Using the Cue Bus (549)13.3The Plug-in Chain (551)13.4The Plug-in Strip (552)13.4.1The Plug-in Header (554)13.4.2Panels for Drumsynths and Internal Effects (556)13.4.3Panel for the Sampler (557)13.4.4Custom Panels for Native Instruments Plug-ins (560)13.4.5Undocking a Plug-in Panel (Native Instruments and External Plug-ins Only) (564)14Using Effects (567)14.1Applying Effects to a Sound, a Group or the Master (567)14.1.1Adding an Effect (567)14.1.2Other Operations on Effects (574)14.1.3Using the Side-Chain Input (575)14.2Applying Effects to External Audio (578)14.2.1Step 1: Configure MASCHINE Audio Inputs (578)14.2.2Step 2: Set up a Sound to Receive the External Input (579)14.2.3Step 3: Load an Effect to Process an Input (579)14.3Creating a Send Effect (580)14.3.1Step 1: Set Up a Sound or Group as Send Effect (581)14.3.2Step 2: Route Audio to the Send Effect (583)14.3.3 A Few Notes on Send Effects (583)14.4Creating Multi-Effects (584)15Effect Reference (587)15.1Dynamics (588)15.1.1Compressor (588)15.1.2Gate (591)15.1.3Transient Master (594)15.1.4Limiter (596)15.1.5Maximizer (600)15.2Filtering Effects (603)15.2.1EQ (603)15.2.2Filter (605)15.2.3Cabinet (609)15.3Modulation Effects (611)15.3.1Chorus (611)15.3.2Flanger (612)15.3.3FM (613)15.3.4Freq Shifter (615)15.3.5Phaser (616)15.4Spatial and Reverb Effects (617)15.4.1Ice (617)15.4.2Metaverb (619)15.4.3Reflex (620)15.4.4Reverb (Legacy) (621)15.4.5Reverb (623)15.4.5.1Reverb Room (623)15.4.5.2Reverb Hall (626)15.4.5.3Plate Reverb (629)15.5Delays (630)15.5.1Beat Delay (630)15.5.2Grain Delay (632)15.5.3Grain Stretch (634)15.5.4Resochord (636)15.6Distortion Effects (638)15.6.1Distortion (638)15.6.2Lofi (640)15.6.3Saturator (641)15.7Perform FX (645)15.7.1Filter (646)15.7.2Flanger (648)15.7.3Burst Echo (650)15.7.4Reso Echo (653)15.7.5Ring (656)15.7.6Stutter (658)15.7.7Tremolo (661)15.7.8Scratcher (664)16Working with the Arranger (667)16.1Arranger Basics (667)16.1.1Navigating Song View (670)16.1.2Following the Playback Position in Your Project (672)16.1.3Performing with Scenes and Sections using the Pads (673)16.2Using Ideas View (677)16.2.1Scene Overview (677)16.2.2Creating Scenes (679)16.2.3Assigning and Removing Patterns (679)16.2.4Selecting Scenes (682)16.2.5Deleting Scenes (684)16.2.6Creating and Deleting Scene Banks (685)16.2.7Clearing Scenes (685)16.2.8Duplicating Scenes (685)16.2.9Reordering Scenes (687)16.2.10Making Scenes Unique (688)16.2.11Appending Scenes to Arrangement (689)16.2.12Naming Scenes (689)16.2.13Changing the Color of a Scene (690)16.3Using Song View (692)16.3.1Section Management Overview (692)16.3.2Creating Sections (694)16.3.3Assigning a Scene to a Section (695)16.3.4Selecting Sections and Section Banks (696)16.3.5Reorganizing Sections (700)16.3.6Adjusting the Length of a Section (702)16.3.6.1Adjusting the Length of a Section Using the Software (703)16.3.6.2Adjusting the Length of a Section Using the Controller (705)16.3.7Clearing a Pattern in Song View (705)16.3.8Duplicating Sections (705)16.3.8.1Making Sections Unique (707)16.3.9Removing Sections (707)16.3.10Renaming Scenes (708)16.3.11Clearing Sections (710)16.3.12Creating and Deleting Section Banks (710)16.3.13Working with Patterns in Song view (710)16.3.13.1Creating a Pattern in Song View (711)16.3.13.2Selecting a Pattern in Song View (711)16.3.13.3Clearing a Pattern in Song View (711)16.3.13.4Renaming a Pattern in Song View (711)16.3.13.5Coloring a Pattern in Song View (712)16.3.13.6Removing a Pattern in Song View (712)16.3.13.7Duplicating a Pattern in Song View (712)16.3.14Enabling Auto Length (713)16.3.15Looping (714)16.3.15.1Setting the Loop Range in the Software (714)16.3.15.2Activating or Deactivating a Loop Using the Controller (715)16.4Playing with Sections (715)16.4.1Jumping to another Playback Position in Your Project (716)16.5Triggering Sections or Scenes via MIDI (717)16.6The Arrange Grid (719)16.7Quick Grid (720)17Sampling and Sample Mapping (722)17.1Opening the Sample Editor (722)17.2Recording Audio (724)17.2.1Opening the Record Page (724)17.2.2Selecting the Source and the Recording Mode (725)17.2.3Arming, Starting, and Stopping the Recording (729)17.2.5Checking Your Recordings (731)17.2.6Location and Name of Your Recorded Samples (734)17.3Editing a Sample (735)17.3.1Using the Edit Page (735)17.3.2Audio Editing Functions (739)17.4Slicing a Sample (743)17.4.1Opening the Slice Page (743)17.4.2Adjusting the Slicing Settings (744)17.4.3Manually Adjusting Your Slices (746)17.4.4Applying the Slicing (750)17.5Mapping Samples to Zones (754)17.5.1Opening the Zone Page (754)17.5.2Zone Page Overview (755)17.5.3Selecting and Managing Zones in the Zone List (756)17.5.4Selecting and Editing Zones in the Map View (761)17.5.5Editing Zones in the Sample View (765)17.5.6Adjusting the Zone Settings (767)17.5.7Adding Samples to the Sample Map (770)18Appendix: Tips for Playing Live (772)18.1Preparations (772)18.1.1Focus on the Hardware (772)18.1.2Customize the Pads of the Hardware (772)18.1.3Check Your CPU Power Before Playing (772)18.1.4Name and Color Your Groups, Patterns, Sounds and Scenes (773)18.1.5Consider Using a Limiter on Your Master (773)18.1.6Hook Up Your Other Gear and Sync It with MIDI Clock (773)18.1.7Improvise (773)18.2Basic Techniques (773)18.2.1Use Mute and Solo (773)18.2.2Create Variations of Your Drum Patterns in the Step Sequencer (774)18.2.3Use Note Repeat (774)18.2.4Set Up Your Own Multi-effect Groups and Automate Them (774)18.3Special Tricks (774)18.3.1Changing Pattern Length for Variation (774)18.3.2Using Loops to Cycle Through Samples (775)18.3.3Load Long Audio Files and Play with the Start Point (775)19Troubleshooting (776)19.1Knowledge Base (776)19.2Technical Support (776)19.3Registration Support (777)19.4User Forum (777)20Glossary (778)Index (786)1Welcome to MASCHINEThank you for buying MASCHINE!MASCHINE is a groove production studio that implements the familiar working style of classi-cal groove boxes along with the advantages of a computer based system. MASCHINE is ideal for making music live, as well as in the studio. It’s the hands-on aspect of a dedicated instru-ment, the MASCHINE hardware controller, united with the advanced editing features of the MASCHINE software.Creating beats is often not very intuitive with a computer, but using the MASCHINE hardware controller to do it makes it easy and fun. You can tap in freely with the pads or use Note Re-peat to jam along. Alternatively, build your beats using the step sequencer just as in classic drum machines.Patterns can be intuitively combined and rearranged on the fly to form larger ideas. You can try out several different versions of a song without ever having to stop the music.Since you can integrate it into any sequencer that supports VST, AU, or AAX plug-ins, you can reap the benefits in almost any software setup, or use it as a stand-alone application. You can sample your own material, slice loops and rearrange them easily.However, MASCHINE is a lot more than an ordinary groovebox or sampler: it comes with an inspiring 7-gigabyte library, and a sophisticated, yet easy to use tag-based Browser to give you instant access to the sounds you are looking for.What’s more, MASCHINE provides lots of options for manipulating your sounds via internal ef-fects and other sound-shaping possibilities. You can also control external MIDI hardware and 3rd-party software with the MASCHINE hardware controller, while customizing the functions of the pads, knobs and buttons according to your needs utilizing the included Controller Editor application. We hope you enjoy this fantastic instrument as much as we do. Now let’s get go-ing!—The MASCHINE team at Native Instruments.MASCHINE Documentation1.1MASCHINE DocumentationNative Instruments provide many information sources regarding MASCHINE. The main docu-ments should be read in the following sequence:1.MASCHINE MIKRO Quick Start Guide: This animated online guide provides a practical ap-proach to help you learn the basic of MASCHINE MIKRO. The guide is available from theNative Instruments website: https:///maschine-mikro-quick-start/2.MASCHINE Manual (this document): The MASCHINE Manual provides you with a compre-hensive description of all MASCHINE software and hardware features.Additional documentation sources provide you with details on more specific topics:►Online Support Videos: You can find a number of support videos on The Official Native In-struments Support Channel under the following URL: https:///NIsupport-EN. We recommend that you follow along with these instructions while the respective ap-plication is running on your computer.Other Online Resources:If you are experiencing problems related to your Native Instruments product that the supplied documentation does not cover, there are several ways of getting help:▪Knowledge Base▪User Forum▪Technical Support▪Registration SupportYou will find more information on these subjects in the chapter Troubleshooting.Document Conventions1.2Document ConventionsThis section introduces you to the signage and text highlighting used in this manual. This man-ual uses particular formatting to point out special facts and to warn you of potential issues.The icons introducing these notes let you see what kind of information is to be expected:This document uses particular formatting to point out special facts and to warn you of poten-tial issues. The icons introducing the following notes let you see what kind of information canbe expected:Furthermore, the following formatting is used:▪Text appearing in (drop-down) menus (such as Open…, Save as… etc.) in the software andpaths to locations on your hard disk or other storage devices is printed in italics.▪Text appearing elsewhere (labels of buttons, controls, text next to checkboxes etc.) in thesoftware is printed in blue. Whenever you see this formatting applied, you will find thesame text appearing somewhere on the screen.▪Text appearing on the displays of the controller is printed in light grey. Whenever you seethis formatting applied, you will find the same text on a controller display.▪Text appearing on labels of the hardware controller is printed in orange. Whenever you seethis formatting applied, you will find the same text on the controller.▪Important names and concepts are printed in bold.▪References to keys on your computer’s keyboard you’ll find put in square brackets (e.g.,“Press [Shift] + [Enter]”).►Single instructions are introduced by this play button type arrow.→Results of actions are introduced by this smaller arrow.Naming ConventionThroughout the documentation we will refer to MASCHINE controller (or just controller) as the hardware controller and MASCHINE software as the software installed on your computer.The term “effect” will sometimes be abbreviated as “FX” when referring to elements in the MA-SCHINE software and hardware. These terms have the same meaning.Button Combinations and Shortcuts on Your ControllerMost instructions will use the “+” sign to indicate buttons (or buttons and pads) that must be pressed simultaneously, starting with the button indicated first. E.g., an instruction such as:“Press SHIFT + PLAY”means:1.Press and hold SHIFT.2.While holding SHIFT, press PLAY and release it.3.Release SHIFT.1.3New Features in MASCHINE2.8The following new features have been added to MASCHINE: Integration▪Browse on , create your own collections of loops and one-shots and send them directly to the MASCHINE browser.Improvements to the Browser▪Samples are now cataloged in separate Loops and One-shots tabs in the Browser.▪Previews of loops selected in the Browser will be played in sync with the current project.When a loop is selected with Prehear turned on, it will begin playing immediately in-sync with the project if transport is running. If a loop preview starts part-way through the loop, the loop will play once more for its full length to ensure you get to hear the entire loop once in context with your project.▪Filters and product selections will be remembered when switching between content types and Factory/User Libraries in the Browser.▪Browser content synchronization between multiple running instances. When running multi-ple instances of MASCHINE, either as Standalone and/or as a plug-in, updates to the Li-brary will be synced across the instances. For example, if you delete a sample from your User Library in one instance, the sample will no longer be present in the other instances.Similarly, if you save a preset in one instance, that preset will then be available in the oth-er instances, too.▪Edits made to samples in the Factory Libraries will be saved to the Standard User Directo-ry.For more information on these new features, refer to the following chapter ↑4, Browser. Improvements to the MASCHINE MIKRO MK3 Controller▪You can now set sample Start and End points using the controller. For more information refer to ↑17.3.1, Using the Edit Page.Improved Support for A-Series Keyboards▪When Browsing with A-Series keyboards, you can now jump quickly to the results list by holding SHIFT and pushing right on the 4D Encoder.▪When Browsing with A-Series keyboards, you can fast scroll through the Browser results list by holding SHIFT and twisting the 4D Encoder.▪Mute and Solo Sounds and Groups from A-Series keyboards. Sounds are muted in TRACK mode while Groups are muted in IDEAS.。

TroubleshootingSpecificationThe IODD file can be downloaded from the SMC website (URL ).Refer to the product catalogue or SMC website (URL ) for more detailed information about product specifications.DimensionsRefer to the product catalogue or SMC website (URL ) for more detailed information about dimensions.than above are displayed, please contact SMC.Error indicationSnap shot functionThe current flow rate/temperature value can be stored to the switch output ON/OFF set point.When the set value and hysteresis are set, press the UP and DOWN buttons for 1 second or longer simultaneously. Then, the set value of the sub display (right) shows [- - -], and then values corresponding to the current flow rate/temperature are automatically displayed.Peak/bottom value indicationThe max. (min.) rate/temperature when the power is supplied is detected and updated.The value can be displayed on the sub display by pressing the UP or DOWN button in measurement mode.Key-lock functionTo set this function, refer to SMC website (URL ) for more detailed information or contact us.MaintenanceHow to reset the product after a power cut or when the power has been unexpectedly removedThe settings of the product are retained from before the power cut or de-energizing.The output condition also recovers to that before the power cut or de-energizing,but may change depending on the operating environment.Therefore, check the safety of the whole system before operating the product.Function selection mode[F Select to display the function to be change [F mode to return to measurement mode.∗: The sub screen displays the content of function and the setting of the function alternately.The function number is increased and decreased by the UP and DOWN buttons.Display the required function number and press the SET button.Default settingsThe default settings are provided as follows. If these settings are acceptable,retain for use. To change setting, refer to SMC website(URL ) for more detailed information or contact us.Display of sub screenIn measurement mode, the display of the sub screen can be temporarily changed by pressing the UP or DOWN buttons.∗: After 30 seconds, it will automatically reset to the display selected in [F10].∗: Arbitrary displayThe set values and accumulated output of OUT2 cannot be displayed.(Example for 16 L/min type the above )The switch turns on within a set flow range (from P1L to P1H) during window comparator mode. Set P1L (switch lower limit) and P1H (switch upper limit) using the setting procedure above.When reversed output is selected, the main screen displays [n1L] and [n1H].To set accumulated output functions, refer to the product catalogue orSMC website (URL ) for more detailed information.For models with 2 outputs, [P_2] or [n_2] will be displayed. Set as above.For models with the temperature sensor attached, [ tn] will be displayed.When the fluid temperature falls below the set value, the output turns ON.∗: If a button operation is not performed for 30 seconds during the change of setting, the set value will start flashing.Refer to the SMC website (URL ) for more detailed information about product troubleshooting.Note: Specifications are subject to change without prior notice and any obligation on the part of the manufacturer.© 2018 SMC Corporation All Rights Reserved Akihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPAN Phone: +81 3-5207-8249 Fax: +81 3-5298-5362URL PF ※※-OMV0007Safety InstructionsFlow (Temperature) SettingInstallationBracket mounting (PF3W704/720/740)Mount the product (with bracket) usingthe mounting screws supplied (M4 x 4 pcs.).For models with flow adjustment valve attached, fix using 8 mounting screws.Bracket thickness is approx. 1.5 mm.Measurement modeThe mode in which the flow is detected and displayed, and the switch function is operating.This is the basic operating mode; other modes should be selected for set-point and other function setting changes.Approx. 3 seconds for this period)Mounting and InstallationInstallation•Use the product within the specified operating pressure range and temperature range.•Proof pressure could vary according to the fluid temperature.Check the characteristics data for operating pressure and proof pressure.(4 pins) (Option)(Option)Direct mounting (PF3W704/720/740)Mount using the self tapping screws(nominal size: 3.0 x 4 pcs.) for installation.For models with flow adjustment valvePipingWhen connecting piping to the product, a spanner should be used on the metal piping attachment only.Using a spanner on other parts may damage the product.In particular, do not let the spanner come into contact with the M8 connector.The connector can be easily damaged.If the tightening torque is exceeded, the product can be broken. If the correct tightening torque is not applied, the fittings may become loose.Avoid any sealing tape getting inside the piping.Ensure there is no leakage from loose piping.3/824 mm 1/227 mm 3/432 mm Tighten to the specified torque for piping.The tightening torque for connection threads is shown in the table below.Direct mounting (PF3W711)Mount using the self tapping screws(nominal size: 4.0 x 4 pcs.) for installation.The tightening torque must be 1 to 1.2 Nm.The self tapping screws cannot be re-used.Refer to the outline dimension drawing for mounting hole size.Refer to the product catalogue or SMC website (URL )for more detailed information.WiringWiring of connectorConnections should only be made with the power supply turned off.Use separate routes for the Flow switch wiring and any power or high voltage wiring. Otherwise, malfunction may result due to noise.Ensure that the FG terminal is connected to ground when using a commercially available switch-mode power supply. When a switch-mode power supply isconnected to the product, switching noise will be superimposed and the product specification can no longer be met. This can be prevented by inserting a noise filter, such as a line noise filter and ferrite core, between the switch-mode power supply and the product, or by using a series power supply instead of a 141 mm How to adjust the flow rate(when a flow adjustment valve is mounted)(1) Rotate the knob of the valve to adjust the flowrate to the target value.(2) Be sure to confirm that there is no fluid leakagegenerated after adjustment.the valve several times for re-adjustment, and confirm that there is no fluid leakage.)(3) The flow adjustment valve is not designed forIf the valve is adjusted frequently, fluid may leak due to wear of the internal seal.BodyDisplayBracket mounting (PF3W711)Mount the product (with bracket) usingthe mounting screws supplied (M5 x 4 pcs.).Bracket thickness is approx. 2 mm.2. Press the UP or DOWN button to change the set value.The UP button is to increase and the DOWN button is to decrease the set value.•Press the UP button once to increase by one digit, press and hold to continuously increase.3. Press the SET button to finish the setting.•Press the DOWN button once todecrease by one digit, press and hold tocontinuously decrease.Mounting•Never mount the product in a location where it will be used as a support.•Mount the product so that the fluid flows in the direction indicated by the arrow on the side of the body.•Check the flow characteristics data for pressure loss and the straight inlet pipe length effect on accuracy, to determine inlet piping requirements.•Do not sharply reduce the piping size.•The monitor with integrated display can be rotated. It can be set at 90o intervals clockwise and anticlockwise, and also at 45o and 225o . Rotating the display with excessive force will damage the end stop.Refer to the product catalogue or SMC website (URL )for more detailed information.11/454 mm 11/254 mmBefore UseDigital Flow Switch(Integrated display type)(Integrated display type).Please read this manual carefully before operating the product and make sure you understand its capabilities and limitations. Please keep this manual handy for future reference.Safety InstructionsThese safety instructions are intended to prevent hazardous situations and/or equipment damage.These instructions indicate the level of potential hazard with the labels of"Caution", "Warning" or "Danger". They are all important notes for safety and must be followed in addition to International standards (ISO/IEC) and other safety regulations.OperatorWidth across flats of attachment<Operation>1. Press the SET button in measurement mode to display set values.Set value on the right side of the sub screen flashes.。

HP RUM MobileHP RUM 9.23 For Mobile AppsThe importance of measuring application end user experience is significant when it comes to mobile usage. Mobile users are much less tolerant to application errors, slow response times, or poor usability. RUM answers this need by providing performance and availability status reports of your mobile app.Motivation: Monitor What MattersImportance of Network PerformanceApplications are often required to exchange information with back-end servers. For example, getting the status of a user’s bank account, receiv ing updates from friends, or posting a new picture to a blog. In all cases, the response time of such network communication has a direct effect on the overall user experience and satisfaction with the application. Various parameters can affect these response times, from the network load of the mobile carrier to hardware problems on back-end servers. Identifying slow response times and their cause are the first step in improving users’ satisfaction and increasing brand loyalty.Measuring on DeviceMeasuring a mobile application’s latency accurately requires measuring the latency on the device itself in the same way a user experiences it.Eliminate the blind spots by getting visibility to the performance of third party services such as CDN and ads, which cannot be monitored otherwise as well as to the characteristics of the user device.In order to determine the exact impact performance problems have on users, RUM collects various user statistics such as device type, operating system, mobile carrier, installed application version. See the New “Mobile Health” report section below. Improve user experience for mobile app One of the most important factors affecting user experience of mobile applications is the responsiveness of back-end servers. The Network for Mobile Apps solution enables you to measure this time from the device, breaking it down to mobile network and server performance components.See how different devices perform Mobile applications are installed on various devices, each one running on certain operating systems, equipped with different hardware resources, and connected via one of many network carriers. Application performance may vary on each device and RUM can help you identify where performance needs to be improved.RUM for Mobile AppsIntroductionSimple Instrumentation ProcessRUM Mobile monitors native applications on an end user’s device. The application is usually installed from the Apple/Google Stores and comes with embedded RUM Mobile capabilities, being pre-instrumented prior to publishing in the store. For Android applications, we developed a simple utility that embeds instrumentation in the application in a very intuitive way. The main advantage is that no code changes are required and the development process is not affected. With iOS applications, a special library needs to be added to the project, but no code change is required.Native and Hybrid SupportMobile applications that are developed using both Native (iOS/Android) and HTML/JavaScript technologies (Hybrid) can also be monitored by RUM. Moreover, the same instrument-once process is used for all types of applications and you do not need to perform a different process for Hybrid applications.DeploymentMobile devices running an instrumented application report relevant information to a RUM Browser Probe. This requires a network configuration that enables Mobile users to connect to a predefined RUM Browser Probe URL for data reporting. The RUM Engine also connects to the Browser Probe to pull data; no connections are opened from the Probe to the Engine. You can also locate the Browser Probe outside an organization (for example, on a cloud hosted machine). The following diagram shows both deployment options:No Impact on the ApplicationThe instrumentation added by RUM to an application does not change the way the application functions and performs; it only measures the duration of certain operations. The data is sent to the RUM Client Probe (RUM Browser Probe) in chunks by a background process, so user experience is not affected. Moreover, there are fuses on the amount of memory used by the RUM background process, as well as network usage for the data channel between the mobile device and the Browser Probe. These parameters can be configured during instrumentation.SecurityMonitoring the user experience from a mobile device requires sending data to the RUM Client Probe. Only the URLs that the application has accessed are reported, no personal information is collected. The data from the mobile device is sent over an HTTPS (secured) channel. By default, the RUM Engine communicates with the RUM Client Probe over HTTPS connections with bi-directional authentication using server and client certificates.New “Mobile Health” reportThe RUM Mobile data is available in all RUM reports in BSM, as well as Service Health and SLM applications. For a quick and intuitiveRUM for Mobile Appsoverview of the status of a mobile app, a new “Mobile Health” report slices the information by different dimensions: user’s location, operating system, application version, device type, and mobile network carrier.The following is an example of a Mobile Health reports displaying an application overview and breakdown by locations:You can view specific HTTP requests, and a breakdown by various dimensions:You can view the requests by domains and see how third party cloud providers affect performance of your application:RUM for Mobile AppsHow to Configure RUM Monitoring for Your AppInstallInstall BSM, RUM Engine, and RUM Client Probe. The Browser Probe can be installed on a dedicated machine, or side-by-side with the RUM Engine and/or the RUM Sniffer Probe, as long as hardware requirements for all components are met. Refer to the Deployment paragraph above when choosing the location for the Browser Probe. C onsider both “In house” and “Cloud” options.Create application in BSMCreate a new RUM application in BSM End User Management (EUM) Administration, using the new “Mobile Application” template. As part of an application creation, a unique Application Key is generated, which is used when instrumenting the mobile applications. Do not forget to assign a RUM Engine and RUM Client Probe for the new application in the BSM EUM Administration.Instrument mobile application - AndroidIn order to instrument Android applications, open the Mobile Application Instrumentation tool, from the Tools menu in the RUM Engine web console. Provide the APK (compiled Android application) you want to instrument.When specifying the “RUM Client Probe URL”, note that this is the URL that will be accessed by the users’ mobile devices. It may be different from the internal host name/URL that is used for communication with the RUM Engine. It is recommended to use the “https://” connection scheme.Select the application that you previously defined in the BSM, and the Application Key is fetched automatically by the tool and embedded in the instrumented application.You can select Instrument for Testing, so the instrumented application is signed with a temporary certificate, that can only be used for testing purposes.Instrument mobile application – iOSFor iOS application instrumentation, you need to add the RUM Monitoring library to your project, along with couple of dependency frameworks. You also need to add a PLIST file to your project, which will configure the URL of the Probe, Application Key, and other optional parameters. Refer to the RUM Installation and Upgrade guide for complete information.TestAs with any change to your application, it is recommended that you verify the user experience of the application after the instrumentation process. You can see how the data is reflected in BSM reports and enhance the configuration if needed.RUM for Mobile AppsExtracting additional contentBy default, RUM will only report the URLs of HTTP requests made by the application. In some cases you may want to extract additional information from the HTTP headers or POST content in order to identify the requests and understand the user flow in the application. You can define content extraction in the Extracted Parameters section, and add rules to extract the Username.The configuration is dynamically pushed to all monitored devices, so you can continue making changes to the configuration of the extracted parameters after shipping the application to the Play/App Store. For security and privacy considerations, while instrumenting the app, you can instruct the application to ignore such dynamic configuration.In order to define the Extracted Parameters, you should be familiar with the internal format of the POST content that your application sends to the server, as well as with special HTTP headers. In order to get this information, you can use the special instrumentation mode, which stores content of all requests in a local file instead of sending data to the Browser Probe. For Android, you select “Instrument for Offline Testing” mode and check “Store monitored data locally”. For iOS you add a special flag to the PLIST file in your project. You install the instrumented application on a testing device, perform the usual business process within the application, and collect the resulting textual file for content analysis. Note that in this mode whole content is saved, including sensitive data if such was sent by the application to the server. Do not distribute the application instrumented in this mode to your users.DistributeThe last step is uploading the instrumented version of the application to the Store. For Android, you use the “Instrument for Production” mode, providing the certificate to sign the APK file (alternatively, you can sign it later). With iOS applications, you need to build the project in production configuration.Mobile resources utilizationAs mentioned above, RUM monitored data is collected and reported by a background process, without affecting the user experience. There are a number of types of mobile device resources used by the RUM data collection of which you should be aware.Network bandwidth. The volume of the network used by RUM to transfer the collected data to the Client Probe depends on the type of monitored application. For a typical mobile application, RUM monitoring adds up to 7% overhead to the total network usage. For applications that make a relatively low number of network requests, the overhead is up to 15KB for a 10-minute session. You can configure the maximal network bandwidth that RUM is allowed to consume during the instrumentation process.Battery. The main parameter that affects battery usage by RUM monitoring is the frequency of HTTP communication to the RUM Browser Probe. When the application is not generating any network activity, RUM has no data to report to the Browser Probe. In order to reduce the number of HTTP requests made by RUM monitoring, we delay the information on the device, and send it to the Browser Probe in larger chunks. By default, the maximal delay is 2 minutes. In case a large amount of data is accumulated, it is delivered earlier, but the minimal interval between two subsequent reports is 30 seconds. Both minimal and maximal time intervals can be changed during the instrumentation.RUM for Mobile AppsEnd-to-end monitoringMonitoring the application on device is important for validating end user experience and isolation problems. In order to gain visibility to the health of the backend of the application, we recommend combining mobile client monitoring with monitoring application backend components.Application TiersCombined with the RUM Network/Sniffer functionality, you can define Web and Backend tiers for your mobile application, as you do for any application monitored by RUM. Additional application tiers can be configured in the Application Tiers tab of the application in End User Management Administration.With Web Tiers, you can follow the same HTTP request through multiple components:Backend Tiers can provide visibility to additional application components:Integration with HP DiagnosticsTo enable quick isolation and pinpointing of the cause of a performance problem, you can drill down from a request monitored by RUM into Diagnostics to understand the application server behavior at the time, or view a full call profile to identify a problematic method.Privacy and SecurityThe information collected on the mobile device is transferred to the RUM Browser Probe over a secure HTTPS channel.By default, RUM only collects URLs of HTTP requests and general device information, such as the OS version, device model, and mobile carrier.The Extracted Parameters that are manually configured for the application may potentially include a user’s sensitive information, so be extra careful when defining these parameters. In BSM, only a Secure User has permissions to modify sensitive configurations including Extracted Parameters and Username extraction. In addition, as part of the instrumentation process, you can instruct the application to ignore any extracted parameters that are defined in BSM, and not to do any POST content extraction.The location of the users is determined by the Browser Probe based on the visible IP address of the reporting device. GPS or other location services available on a device are not used by RUM.。

2.Reconnect the residual-toner feed motor connector J63 and connector J155 on the DC controller PCA.3.Perform the TCU Motor test. Under Diagnostics/Component Test, select TCU Motor and press OK. If this testfails, replace the Residual Toner Feed Motor, part number RM1-5605-000CN.4.If the issue persists, check the gears and ducting of the Waste Toner Paper Feed assembly. If the gears are wornout, replace this component, part number RM1-5584-000CN.top59.C0 ErrorDescriptionDeveloper disengaging (alienation) motor rotation errorRecommended action1.Reconnect intermediate connector J87 of the developing disengagement sensor (SR11), connector J112 on theDC controller PCA, connector J38 of the developing disengagement motor, and the connector J261 on the high-voltage power supply D PCA.2.Run the manual sensor test to verify that the developing disengagement sensor (SR11) is functioning properly.NOTE: SR11 cannot be manually toggled. See Service Manual, Chapter "Manual sensor test (special-modetest)" for instructions.If it is not, replace the main-drive assembly.3.Run the component test for the developing disengagement (alienation) motor (M10) to verify that thedisengagement mechanism is functioning properly. If it is not, replace the developing disengagement motor(M10).top59.F0 ErrorDescriptionA 59.F0 error message is displayed on control panel when the product boots up.CauseThis behavior is primarily caused by a transfer alienation failure in which the ITB is stuck and unable to rotate or because the SR9 sensor (the primary transfer-roller-disengagement sensor aka Sensor K) has gone bad.Recommended actionUpdate to the latest available firmware at .If the issue persists, reseat the ITB, check the connections, perform manual and diagnostic flag and sensor tests, test the fuser motor, and then test the alienation mechanism:1.Reseat the ITB.2.Check the connections to primary transfer-roller-disengagement sensor (SR9 at connector J19) and to the DCcontroller PCA (connector J128).3.If the issue persists, remove the ITB completely from the unit and manually test the ITB gear and flag.1.Rotate the gear and check that the flag actuates when the white gear is turned.Figure 13: Rotate the ITB gear to actuate the ITB flagFigure 14: Flag moving as gear rotatesIf the ITB flag is broken or damaged, or if the flag does not move, replace the ITB.4.If the ITB gear and flag are working properly, test Sensor SR9 by using the MANUAL SENSOR TEST andmanually testing the SR9 flag.1.Remove the ITB if it has been re-installed and locate Sensor SR9 inside the ITB cavity.Figure 15: Primary transfer-roller-disengagement sensor SR9 (Sensor K)2.On the control panel, press the Home button, press the down arrow to highlight the DIAGNOSTICSmenu and press OK, and then select MANUAL SENSOR TEST and press OK.3.From inside the ITB cavity, press up and then release the SR9 flag to actuate the sensor.Figure 16: Manually activating Flag to actuate Sensor SR94.While pressing and releasing the flag, check the control panel display for sensor response (under K) andconfirm that the sensor toggles between 0 and 1 (0 is the normal state).5.If the value does not toggle between 0 and 1, replace the sensor (WG8-5696-000CN).NOTE: To stop the diagnostic, press OK, select EXIT DIAGNOSTICS, and then press OK.5.If Sensor SR9 is working properly, perform a fuser motor (M2) COMPONENT TEST.1.Remove the Fuser.2.Defeat the right door safety switch (upper left area) by inserting a stiff or folded piece of paper anddefeat the right door logic switch (right side below fuser) by using masking tape to hold switch down.3.On the control panel, press the Home button, press the down arrow to highlight the DIAGNOSTICSmenu and press OK, select COMPONENT TEST and press OK, and then select FUSER MOTOR andpress OK.4.During the test, observe the fuser motor gear.5.If the test fails or the fuser motor gear does not rotate, replace the fuser motor (M2).NOTE: To exit the diagnostic, select EXIT DIAGNOSTICS and then press OK.6.If the fuser motor is working properly, perform an ITB Contact/ Alienation Test.NOTE: This test activates the fuser motor (M2) and primary transfer solenoid (SL1) to cycle through the ITBalienation stages.1.Defeat the right door safety switch (upper left area) by inserting a stiff/folded piece of paper and thendefeat right door logic switch (right side below fuser) by use masking tape to hold switch down.2.On the control panel, press the Home button, press the down arrow to highlight the DIAGNOSTICSmenu and press OK, select COMPONENT TEST and press OK, and then select ITB Contact/ AlienationTest and press OK.3.During the test, observe the alienation drive hub located above the cyan cartridge.4.If the test fails or the alienation drive hub does not rotate, replace the fuser-drive assembly.NOTE: To exit the diagnostic, select EXIT DIAGNOSTICS and then press OK.7.Check the connections again to the primary-transfer disengagement sensor J19 and to the connector J128 on theDC controller PCA before reinstalling the ITB.8.Remove any items used to defeat the right door switches, reinstall the ITB and any other components removedduring testing.9.If the error still persists, replace the DC Controller.top60.02 ErrorDescriptionTray 2 is not lifting correctly.。

施乐故障诊断代码1 维修呼叫程序呼叫流程……………………………………………………………………………… 2-13 002-xxx HDD002-770 作业模板处理-HD 满RAP……………………………………………… 2-15 003-xxx IPS-ESS 通讯003-318 IIT 软件故障RAP ……………………………………………………… 2-17 003-319 IIT 视频驱动程序检测故障RAP ……………………………………… 2-17 003-320 IISS-ESS 通讯故障1 RAP …………………………………………… 2-18 003-321 IISS-ESS 通讯故障2 RAP …………………………………………… 2-18 003-322 IISS-ESS 通讯故障3 RAP …………………………………………… 2-19 003-323 IISS-ESS 通讯故障4 RAP …………………………………………… 2-19 003-324 IISS-ESS 通讯故障5 RAP …………………………………………… 2-20 003-325 IISS-ESS 通讯故障6 RAP …………………………………………… 2-20 003-326 IISS-ESS 通讯故障7 RAP …………………………………………… 2-21 003-327 IISS-ESS 通讯故障8 RAP …………………………………………… 2-21 003-328 IISS-ESS 通讯故障9 RAP …………………………………………… 2-22 003-329 IISS-ESS 通讯故障10 RAP ………………………………………… 2-22 003-330 IISS-ESS 通讯故障11 RAP ………………………………………… 2-23 003-331 IISS-ESS 通讯故障12 RAP ………………………………………… 2-23 003-332 IISS-ESS 通讯故障13 RAP ………………………………………… 2-24 003-333 IISS-ESS 通讯故障14 RAP ………………………………………… 2-24 003-334 IISS-ESS 通讯故障15 RAP ………………………………………… 2-25 003-335 IISS-ESS 通讯故障16 RAP ………………………………………… 2-25 003-336 IISS-ESS 通讯故障17 RAP ………………………………………… 2-26 003-337 IISS-ESS 通讯故障18 RAP ………………………………………… 2-26 003-338 IISS-ESS 通讯故障19 RAP ………………………………………… 2-27 003-339 IISS-ESS 通讯故障20 RAP ………………………………………… 2-27 003-340 IISS-ESS 通讯故障21 RAP ………………………………………… 2-28 003-341 IISS-ESS 通讯故障22 RAP ………………………………………… 2-28 003-342 IISS-ESS 通讯故障23 RAP ………………………………………… 2-29 003-343 IISS-ESS 通讯故障24 RAP ………………………………………… 2-29 003-345 X PIO 未锁定故障1 RAP ……………………………………………… 2-30 003-346 X PIO 未锁定故障2 RAP ……………………………………………… 2-30 003-750 书本双面-原稿不够RAP ……………………………………………… 2-31 003-751 PANTHER 容量低下（扫描）RAP …………………………………… 2-31 003-753 扫描不能超过300dpi RAP …………………………………………… 2-32 003-760 扫描设置故障RAP……………………………………………………… 2-32 003-761 不正确的纸盘尺寸RAP………………………………………………… 2-33 003-763 未发现调整表RAP……………………………………………………… 2-33 003-780 扫描图像压缩故障RAP………………………………………………… 2-34 003-795 AMS 限制错误RAP …………………………………………………… 2-34 003-942 原稿尺寸自动检测故障RAP…………………………………………… 2-35 003-944 图像重复计数RAP……………………………………………………… 2-35003-945 放大倍率不适合RAP…………………………………………………… 2-36 003-946 每个方向都矛盾（复印APS）RAP…………………………………… 2-36 003-947 返回原稿计数错误RAP………………………………………………… 2-37 003-948 返回原稿不匹配RAP…………………………………………………… 2-37 003-949 原稿不适当（图像覆盖）RAP………………………………………… 2-38 003-950 混合原稿尺寸错误RAP………………………………………………… 2-38 003-955 原稿尺寸交换错误RAP………………………………………………… 2-39 003-956 原稿尺寸不明错误RAP………………………………………………… 2-39 003-957 原稿尺寸错误RAP……………………………………………………… 2-40 003-963 无APS 目标纸盘RAP ………………………………………………… 2-40 003-965 ATS/APS 无纸（IIT 检测）RAP ……………………………………… 2-41 003-966 ATS/APS 无目标（IIT）RAP ………………………………………… 2-41 003-970 传真行存储器溢出RAP………………………………………………… 2-42 003-972 最大存储页溢出RAP…………………………………………………… 2-42 003-973 各个方向都矛盾………………………………………………………… 2-43 003-974 下一原稿规格RAP ……………………………………………………… 2-43 003-976 传真行存储器溢出（N up）RAP ……………………………………… 2-44 003-977 原稿不匹配（多重扫描）RAP ………………………………………… 2-44 003-980 装钉位置错误RAP ……………………………………………………… 2-45 003-981 装钉尺寸错误RAP ……………………………………………………… 2-45 005-xxx DADF005-121 CVT 输送传感器On 卡纸RAP………………………………………… 2-47 005-122 CVT 单面/面1 预定位On 卡纸RAP ………………………………… 2-48 005-123 CVT 单面/面1 定位卡纸RAP ………………………………………… 2-49 005-125 CVT 定位传感器Off 卡纸RAP………………………………………… 2-50 005-131 CVT 翻转On 卡纸RAP………………………………………………… 2-51 005-132 CVT 翻转On 卡纸2RAP ……………………………………………… 2-52 005-134 CVT 翻转传感器Off 卡纸（翻转器）RAP …………………………… 2-53 005-135 CVT 面2 预定位On 卡纸RAP…………………………………………2-54 005-136 CVT 面2 定位On 卡纸RAP…………………………………………… 2-55 005-139 CVT 翻转传感器Off 卡纸RAP………………………………………… 2-56 005-145 CVT 定位传感器Off 卡纸（翻转器）RAP …………………………… 2-57 005-146 CVT 预定位传感器Off 卡纸RAP……………………………………… 2-58 005-147 CVT 预定位传感器Off 卡纸（翻转器）RAP ………………………… 2-59 005-194 在FF 混合尺寸中SS 尺寸不匹配卡纸RAP ………………………… 2-60 005-196 CVT 尺寸不匹配卡纸（无混合）RAP………………………………… 2-61 005-197 禁止组合尺寸卡纸RAP………………………………………………… 2-62 005-198 太短尺寸卡纸RAP……………………………………………………… 2-63 005-199 太长尺寸卡纸RAP……………………………………………………… 2-64 005-280 DADF EEPROM 故障RAP …………………………………………… 2-65 005-283 DADF 高度传感器逻辑故障RAP……………………………………… 2-65 005-284 DADF APS 传感器故障RAP ………………………………………… 2-66 005-285 DADF 轻推辊提升故障RAP…………………………………………… 2-67 005-286 DADF 输出传感器故障RAP…………………………………………… 2-68005-302 DADF 输送器盖联锁打开RAP………………………………………… 2-69 005-304 CVT 稿台联锁打开RAP ……………………………………………… 2-70 005-305 CVT 输送器联锁打开（运行）RAP…………………………………… 2-70 005-307 CVT 稿台联锁在运行中打开RA ……………………………………… 2-71 005-906 CVT 输送传感器静态卡纸RAP ……………………………………… 2-71 005-907 CVT 预定位传感器静态卡纸RAP……………………………………… 2-72 005-908 CVT 定位传感器静态卡纸RAP………………………………………… 2-72 005-913 CVT 翻转传感器静态卡纸RAP………………………………………… 2-73 005-915 CVT APS No1 传感器静态卡纸RAP ………………………………… 2-73 005-916 CVT APS No2 传感器静态卡纸RAP ………………………………… 2-74 005-917 CVT APS No3 传感器静态卡纸RAP ………………………………… 2-74 005-942 DADF 中放置的原稿故障RAP ………………………………………… 2-75 005-943 DADF 盘提升故障RAP ………………………………………………… 2-76 010-xxx 定影器2nd Version 09/2004 状态-指示-维修DC236/286 2-1010-313 控制热敏电阻故障RAP………………………………………………… 2-77 010-314 侧端热敏电阻故障RAP………………………………………………… 2-77 010-318 热-下跌恢复故障RAP ………………………………………………… 2-78 010-320 热辊过热故障RAP……………………………………………………… 2-78 010-327 定影器On 时间故障RAP……………………………………………… 2-79 010-398 定影器锁位故障RAP…………………………………………………… 2-80 012-xxx 装订器012-111 装订器H-传输入口传感器Off 卡纸RAP……………………………… 2-81 012-112 装订器H-传输入口传感器On 卡纸RAP……………………………… 2-82 012-121 H-传输出口传感器Off 卡纸RAP ……………………………………… 2-83 012-126 H-传输入口传感器Off 卡纸RAP ……………………………………… 2-84 012-151 编辑盘入口传感器Off 卡纸RAP ……………………………………… 2-85 012-152 编辑盘入口传感器On 卡纸RAP ……………………………………… 2-86 012-161 装订器压板卡纸RAP…………………………………………………… 2-87 012-162 H-传输出口传感器On 卡纸RAP……………………………………… 2-88 012-211 堆积盘故障RAP………………………………………………………… 2-89 012-212 堆积盘上限故障RAP…………………………………………………… 2-90 012-221 前对齐板原位传感器On 故障RAP…………………………………… 2-91 012-223 前对齐板原位传感器Off 故障RAP…………………………………… 2-92 012-224 后对齐板原位传感器Off 故障RAP…………………………………… 2-93 012-260 排出压板原位传感器On 故障RAP…………………………………… 2-94 012-263 后对齐板故障RAP……………………………………………………… 2-95 012-282 排出压板原位传感器Off 故障RAP ………………………………… 2-96 012-283 放置压板原位传感器On 故障RAP ………………………………… 2-97 012-284 放置压板原位传感器Off 故障RAP ………………………………… 2-98 012-291 装订器故障RAP …………………………………………………… 2-99012-293 装订前角传感器On 故障RAP ………………………………………… 2-100 012-294 装订前角传感器Off 故障RAP ………………………………………… 2-101012-295 装订移动传感器On 故障RAP ………………………………………… 2-102 012-296 装订移动传感器Off 故障RAP ………………………………………… 2-103 012-301 装订器顶盖打开RAP …………………………………………………… 2-104 012-302 装订器前盖打开RAP …………………………………………………… 2-104 012-303 装订器H-传输盖打开RAP …………………………………………… 2-105 012-901 装订器H-传输入口传感器静态卡纸RAP……………………………… 2-105 012-902 H-传输出口传感器静态卡纸RAP……………………………………… 2-106 012-903 纸张留在编辑盘入口传感器RAP……………………………………… 2-106 012-905 编辑盘纸张传感器静态卡纸RAP……………………………………… 2-107 012-923 H-传输入口传感器静态卡纸B RAP…………………………………… 2-107 016-xxx 传真服务016-210 SW 选项故障（HDD 不存在）RAP…………………………………… 2-109 016-211 SW 选项故障（系统存储器不足）RAP ……………………………… 2-109 016-212 SW 选项故障（页存储器不足）RAP ………………………………… 2-110 016-213 SW 选项故障（打印机卡不存在）RAP ……………………………… 2-110 016-214 SW 选项故障（传真卡不存在）RAP ………………………………… 2-111 016-215 SW 选项故障（JPEG 板不存在）RAP ……………………………… 2-111 016-311 扫描器未安装RAP……………………………………………………… 2-112 016-315 IIT 接口故障RAP ……………………………………………………… 2-112 016-316 未检测到页存储器RAP………………………………………………… 2-113 016-317 页存储器中止-标准RAP ……………………………………………… 2-113 016-318 页存储器中止-选项RAP ……………………………………………… 2-114 016-321 传真模块故障RAP …………………………………………………… 2-114 016-322 JBA 帐户满RAP………………………………………………………… 2-115 016-450 SMB 主机名重复RAP ………………………………………………… 2-115 016-454 DNS 动态更新故障RAP ……………………………………………… 2-116 016-455 SNTP 服务器超时RAP ………………………………………………… 2-116 016-456 SNTP 时间异步RAP …………………………………………………… 2-117 016-503 SMTP 服务器重定向故障RAP………………………………………… 2-117 016-504 POP 服务器重定向故障RAP ………………………………………… 2-118 016-505 POP 重定向验证故障RAP …………………………………………… 2-118 016-600 KO 验证锁定RAP ……………………………………………………… 2-119 016-601 非法访问检测RAP……………………………………………………… 2-119 016-701 ART EX 内存不足RAP………………………………………………… 2-120 016-702 页缓冲器不足RAP……………………………………………………… 2-120 016-703 E-mail 至无效邮箱R AP………………………………………………… 2-121 016-704 邮箱满RAP……………………………………………………………… 2-121 016-705 安全打印故障RAP……………………………………………………… 2-122 016-706 最大用户数超出RAP…………………………………………………… 2-122 016-707 样本打印故障RAP……………………………………………………… 2-123 016-708 HD 因注解/水印图象而满RAP………………………………………… 2-123 016-709 ART EX 命令故障RAP………………………………………………… 2-124 016-710 延时打印故障RAP……………………………………………………… 2-124 016-711 E-mail 传输尺寸限制超出RAP………………………………………… 2-125016-712 PANTHER 能下低下（I-Formatted）RAP…………………………… 2-125016-716 TIFF 数据溢出RAP …………………………………………………… 2-126016-718 超出PCL6 存储器RAP………………………………………………… 2-126016-719 超出PCL 存储器RAP ………………………………………………… 2-127016-720 PCL 命令故障RAP……………………………………………………… 2-127016-721 其它错误RAP…………………………………………………………… 2-128016-722 作业被装订位置NG 删除RAP………………………………………… 2-128016-728 不支持TIFF 数据RAP ………………………………………………… 2-129016-729 TIFF 数据尺寸太大RAP ……………………………………………… 2-129016-730 不支持ART 命令RAP ………………………………………………… 2-130016-731 无效TIFF 数据RAP …………………………………………………… 2-130016-732 表格未注册RAP………………………………………………………… 2-131016-735 更新作业模板RAP……………………………………………………… 2-131016-736 远程目录加锁错误……………………………………………………… 2-132016-737 远程加锁目录卸载错误………………………………………………… 2-132016-746 不支持PDF 文件RAP ………………………………………………… 2-133016-748 HD 满RAP ……………………………………………………………… 2-133016-749 JCL 语法错误RAP……………………………………………………… 2-134016-751 PDF 故障RAP ………………………………………………………… 2-134016-752 PDF 内存不足RAP……………………………………………………… 2-135016-753 PDF 命令不匹配RAP…………………………………………………… 2-135016-754 PDF LZW 未安装RAP ………………………………………………… 2-136016-755 PDF 打印被禁止RAP ………………………………………………… 2-136016-756 审计-禁止服务RAP …………………………………………………… 2-137016-757 审计-无效用户RAP …………………………………………………… 2-137016-758 审计-禁止功能RAP …………………………………………………… 2-138016-759 审计-达到限制RAP …………………………………………………… 2-138016-760 PS 解压缩故障RAP …………………………………………………… 2-139016-761 FIFO 空RAP …………………………………………………………… 2-139016-762 打印语言未安装RAP…………………………………………………… 2 - 1 4 0状态-指示-维修09/2004 2nd Version2-2 DC236/286016-764 SMTP 服务器连接故障RAP…………………………………………… 2 - 1 4 0 016-765 SMTP 服务器HDD 满RAP …………………………………………… ___________2 - 1 4 1016-766 SMTP 服务器文件系统RAP…………………………………………… 2 - 1 4 1 016-767 无效的E-mail 地址RAP ……………………………………………… 2 - 1 4 2016-768 无效的发送者地址……………………………………………………… 2 - 1 4 2 016-769 SMTP 服务器不支持DNS RAP ……………………………………… 2 - 1 4 3016-771 扫描数据贮藏室（DNS 地址）错误RAP …………………………… 2 - 1 4 4016-772 扫描数据贮藏室（DNS 库）错误RAP ……………………………… 2 - 1 4 4016-773 无效的IP 地址RAP …………………………………………………… 2 - 1 4 4016-774 HD 满-压缩转换RAP…………………………………………………… 2 - 1 4 5 016-775 HD 满-图像转换RAP…………………………………………………… 2 - 1 4 5016-776 图像转换错误RAP……………………………………………………… 2 - 1 4 6016-777 图像转换错误RAP……………………………………………………… 2 - 1 4 6016-778 HD 满-扫描图像转换RAP……………………………………………… 2 - 1 4 7 016-779 扫描图像转换错误RAP………………………………………………… 2 - 1 4 7016-780 HD 访问错误-图像转换RAP…………………………………………… 2 - 1 4 8 016-781 扫描服务器连接错误RAP……………………………………………… 2 - 1 4 8016-782 扫描服务器登录错误RAP……………………………………………… 2 - 1 4 9016-783 无效的服务器路径RAP………………………………………………… 2 - 1 4 9016-784 服务器写错误RAP……………………………………………………… 2 - 1 5 0016-785 服务器HD 满RAP……………………………………………………… 2 - 1 5 0 016-786 HD 满-扫描写入错误RAP……………………………………………… 2 - 1 5 1 016-787 无效的服务器IP 地址RAP …………………………………………… 2 - 1 5 1016-788 检查浏览器故障RAP…………………………………………………… 2 - 1 5 2016-789 HD 满-作业存储器RAP………………………………………………… 2 - 1 5 2 016-791 文件检索故障RAP……………………………………………………… 2 - 1 5 3016-792 未发现指定作业RAP…………………………………………………… 2 - 1 5 3016-793 MF I/O HD 满RAP……………………………………………………… 2 - 1 5 4 016-798 No Trust Marking 选择RAP…………………………………………… 2 - 1 5 4016-799 PL W 打印指令故障RAP ……………………………………………… 2 - 1 5 5016-981 HDD 访问错误RAP …………………………………………………… 2 - 1 5 5016-982 HDD 访问错误2 RAP ………………………………………………… 2 - 1 5 6016-985 数据尺寸溢出（扫描到E-mail）RAP………………………………… 2 - 1 5 6021-xxx 传真021-360 EP 附件故障RAP……………………………………………………… ___________2-15 7021-361 EP 附件各类配置错误RAP…………………………………………… 2-15 7021-732 EP 附件-服务被禁用RAP …………………………………………… 2-15 8021-733 EP 附件-服务受彩色模式限制RAP ………………………………… 2-15 8021-750 用过零件请求处理故障（EP-SV）RAP …………………………… 2-15 9021-751 维护请求故障（EP-SV）RAP………………………………………… 2-1 5 9021-770 用过零件请求处理故障（EP-SV）RAP……………………………… 2-1 6 0021-771 维护请求故障（EP-DX）RAP………………………………………… 2 - 1 6 0021-772 EP-DX-安装/卸载故障RAP…………………………………………… 2-16 1021-941 EP-扫描服务因禁用而暂行RAP……………………………………… 2-16 1021-942 EP-扫描服务因彩色模式而暂行RAP………………………………… 2-16 2021-943 EP-打印服务因禁用而暂行RAP……………………………………… 2-16 2021-944 EP-打印服务因彩色模式而暂行RAP………………………………… 2-16 3021-945 EP-服务因禁用而暂行RAP…………………………………………… 2-16 3021-946 EP-服务因彩色模式而暂行RAP……………………………………… 2-16 4024-xxx IOT-ESS 通讯024-340 IOT-ESS 通讯故障1 RAP……………………………………………… 2-165024-341 IOT-ESS 通讯故障2 RAP……………………………………………… 2-165024-342 IOT-ESS 通讯故障3 RAP……………………………………………… 2-166024-343 IOT-ESS 通讯故障4 RAP……………………………………………… 2-166024-345 IOT-ESS 通讯故障5 RAP……………………………………………… 2-167 024-346 IOT-ESS 通讯故障6 RAP……………………………………………… 2-167 024-347 IOT-ESS 通讯故障7 RAP……………………………………………… 2-168 024-348 IOT-ESS 通讯故障8 RAP……………………………………………… 2-168 024-349 IOT-ESS 通讯故障9 RAP……………………………………………… 2-169 024-350 IOT-ESS 通讯故障10 RAP …………………………………………… 2-169 024-351 IOT-ESS 通讯故障11 RAP …………………………………………… 2-170 024-354 IOT-ESS 通讯故障14 RAP …………………………………………… 2-170 024-356 IOT-ESS 通讯故障16 RAP …………………………………………… 2-171 024-362 页面同步非法启动RAP………………………………………………… 2-171 024-363 页面同步非法停止RAP………………………………………………… 2-172 024-364 DMA 传输故障RAP …………………………………………………… 2-172 024-367 解压缩其他故障RAP…………………………………………………… 2-173 024-368 PCI 错误RAP…………………………………………………………… 2-173 024-370 标志码检测故障RAP…………………………………………………… 2-174 024-371 IOT-ESS 通讯故障21 RAP …………………………………………… 2-174 024-372 IOT-ESS 通讯故障22 RAP …………………………………………… 2-175 024-373 IOT-ESS 通讯故障23 RAP …………………………………………… 2-175 024-375 IOT-ESS 通讯故障23 RAP …………………………………………… 2-176 024-746 打印请求故障—纸张RAP……………………………………………… 2-176 024-747 打印指令故障RAP……………………………………………………… 2-177 024-910 纸盘1 尺寸不匹配RAP………………………………………………… 2-177 024-911 纸盘2 尺寸不匹配RAP………………………………………………… 2-178 024-912 纸盘3 尺寸不匹配RAP………………………………………………… 2-179 024-913 纸盘4 尺寸不匹配RAP………………………………………………… 2-180 024-916 混合满堆积盘RAP……………………………………………………… 2-181 024-917 堆积盘装订超出计数RAP……………………………………………… 2-182 024-919 面朝上盘关闭RAP……………………………………………………… 2-183 024-946 纸盘1 不在位RAP …………………………………………………… 2-183 024-947 纸盘2 不在位RAP……………………………………………………… 2-184 024-948 纸盘3 不在位RAP……………………………………………………… 2-184 024-949 纸盘4 不在位RAP……………………………………………………… 2-185 024-950 纸盘1 空RAP ………………………………………………………… 2-185 024-951 纸盘2 空RAP…………………………………………………………… 2-186 024-952 纸盘3 空RAP…………………………………………………………… 2-186 024-953 纸盘4 空RAP…………………………………………………………… 2-187 024-954 MSI 空RAP …………………………………………………………… 2-187 024-958 MSI 尺寸故障RAP …………………………………………………… 2-188 024-959 纸盘1 尺寸不匹配RAP ……………………………………………… 2-188 024-960 纸盘2 尺寸不匹配RAP………………………………………………… 2-189 024-961 纸盘3 尺寸不匹配RAP………………………………………………… 2-189 024-962 纸盘4 尺寸不匹配RAP………………………………………………… 2-190 024-964 装订器张数超出RAP…………………………………………………… 2-190 024-965 ATS/APS 无纸（IOT 检测）RAP …………………………………… 2-191024-966 ATS/APS 元目标错误RAP …………………………………………… 2-192 024-967 不同宽度混合纸张检测(装订器作业) RAP …………………………… 2-192 2nd Version 09/2004 状态-指示-维修DC236/286 2-3024-976 装订器装订静态NG RAP ……………………………………………… 2-193 024-977 装订器输送准备故障RAP……………………………………………… 2-193 024-979 装订器接近空RAP……………………………………………………… 2-194 024-980 装订器堆积盘满RAP…………………………………………………… 2-194 024-982 堆积盘下安全警告RAP………………………………………………… 2-195 024-985 MSI 输送故障RAP……………………………………………………… 2-196 024-986 打印全部确认RAP……………………………………………………… 2-197 025-xxx 诊断HDD025-596 诊断HDD 维护故障RAP ……………………………………………… 2-199 025-597 诊断HDD 初始化故障RAP …………………………………………… 2-199 027-xxx MAIL027-452 重复IP 地址RAP ……………………………………………………… 2-201 027-500 SMTP 服务器邮件I/O 故障RAP……………………………………… 2-201 027-501 POP 服务器邮件I/O 故障RAP………………………………………… 2-202 027-502 POP 邮件I/O 验证故障RAP…………………………………………… 2-202 027-700 媒体故障RAP…………………………………………………………… 2-203 027-701 未找到媒体RAP………………………………………………………… 2-203 027-702 媒体数据未找到/不支持RAP ………………………………………… 2-204 027-703 媒体读出器故障/未连接RAP ………………………………………… 2-204 027-710 因效S/MIME 邮件错误RAP…………………………………………… 2-205 027-711 S/MIME 邮件发送者证书未找到RAP ………………………………… 2-205 027-712 S/MIME 邮件发送者证书无效RAP …………………………………… 2-206 027-713 S/MIME 邮件被改变RAP……………………………………………… 2-206 027-714 S/MIME 邮件发送者假冒RAP………………………………………… 2-207 027-715 S/MIME 邮件证书不被支持RAP……………………………………… 2-207 027-716 禁止接收没有签名的E-mail RAP……………………………………… 2-208 027-720 未找到扩展服务器主机RAP…………………………………………… 2-208 027-721 未找到扩展服务器RAP………………………………………………… 2-209 027-722 扩展服务器时故障RAP …………………………………………… 2-209 027-723 扩展服务器验证故障RAP……………………………………………… 2-210 027-724 扩展服务器访问故障故障RAP………………………………………… 2-210 027-725 扩展服务器操作故障RAP……………………………………………… 2-211 027-726 扩展服务器未知状态RAP……………………………………………… 2-211 027-727 扩展服务器请求无效参数RAP………………………………………… 2-212 027-737 模板服务器读取错误RAP……………………………………………… 2-212 027-739 无效模板服务器路径RAP……………………………………………… 2-213 027-740 模板服务器登录错误RAP……………………………………………… 2-213 027-741 模板服务器连接故障RAP……………………………………………… 2-214 027-742 HD 文件系统满RAP …………………………………………………… 2-214 027-743 模板服务器安装错误RAP……………………………………………… 2-215027-744 模板服务器地址错误（CDNS 带）RAP ……………………………… 2-215 027-745 模板服务器地址错误（CDNS 地址）RAP …………………………… 2-216 027-746 作业模板服务器未准备RAP…………………………………………… 2-216 027-750 传真文件不适合RAP…………………………………………………… 2-217 027-751 作业模板分析错误RAP………………………………………………… 2-217 027-752 要求的用户输入未输入RAP…………………………………………… 2-218 027-753 作业流服务请求禁止RAP……………………………………………… 2-218 027-796 E-mail 不打印RAP……………………………………………………… 2-219 027-797 无效输出目标RAP……………………………………………………… 2-219 033-xxx 传真控制033-363 传真卡复位(重新引导)RAP …………………………………………… 2-221 033-710 原稿不存在RAP………………………………………………………… 2-221 033-711 文档中存在非法页面RAP……………………………………………… 2-222 033-712 系统内存溢出RAP……………………………………………………… 2-222 033-713 未指定链-环RAP ……………………………………………………… 2-223 033-714 扫描错误（未指定文档）RAP ………………………………………… 2-223 033-715 不能启动作业RAP……………………………………………………… 2-224 033-716 无指定MAILBOX RAP ………………………………………………… 2-224 033-717 不正确口令RAP………………………………………………………… 2-225 033-718 邮箱中无文档RAP……………………………………………………… 2-225 033-719 被删除传真作业不能恢复RAP………………………………………… 2-226 033-720 文档创建故障RAP……………………………………………………… 2-226 033-721 页面创建故障RAP……………………………………………………… 2-227 033-724 传真接收存储器溢出RAP……………………………………………… 2-227 033-725 HDD 空间不足RAP …………………………………………………… 2-228 033-726 不能打印双面RAP……………………………………………………… 2-228 033-727 不能旋转图像RAP……………………………………………………… 2-229 033-728 删除自动打印RAP……………………………………………………… 2-229 033-730 传真服务恢复错误RAP………………………………………………… 2-230 033-731 指令不一致RAP………………………………………………………… 2-230 033-732 打印作业被强制轮询删除RAP………………………………………… 2-231 033-733 传真文档号获取错误RAP……………………………………………… 2-231 033-734 传真打印悬置RAP……………………………………………………… 2-232 033-735 传真存储器地址分配超时RAP………………………………………… 2-232 033-736 IFAX Off Ramp 错误RAP……………………………………………… 2-233 033-737 传真卡作业删除RAP…………………………………………………… 2-233 033-738 JBIG 信息故障RAP…………………………………………………… 2-234 033-740 传真直接接收打印删除RAP…………………………………………… 2-234 033-741 传真页面读取打开超时RAP…………………………………………… 2-235 033-742 传真页面读取关闭超时RAP…………………………………………… 2-235 033-743 传真页面写入打开超时RAP…………………………………………… 2-236 033-744 传真页面写入关闭超时RAP…………………………………………… 2-236 033-745 传真数据写入超时RAP………………………………………………… 2-237 033-746 传真数据读取超时RAP………………………………………………… 2-237033-747 传真服务不能启动RAP………………………………………………… 2-238 033-748 传真服务非法顺序RAP………………………………………………… 2-238 033-749 传真卡内存错误RAP…………………………………………………… 2-239 033-750 传真格式错误RAP……………………………………………………… 2-239 033-790 EP-DX 呼叫等待(不重拨计数)RAP …………………………………… 2-240 033-791 EP-DX 呼叫等待(重拨计数)RAP ……………………………………… 2-240 033-792 EP-DX 呼叫停止RAP ………………………………………………… 2-241 034-xxx 传真通讯034-211 传真选项槽1 板故障RAP……………………………………………… 2-243 034-212 传真选项槽1 板故障RAP……………………………………………… 2-243 034-500 不正确拨号数据RAP…………………………………………………… 2-244 034-501 所连通道拨号错误RAP………………………………………………… 2-244 034-502 传真内部不可缺少参数错误RAP……………………………………… 2-245 034-503 传真内部高层服务错误RAP…………………………………………… 2-245 034-504 传真储存存储器溢出RAP……………………………………………… 2-246 034-505 传真工作存储器溢出RAP……………………………………………… 2-246 状态-指示-维修09/2004 2nd Version2-4 DC236/286034-506 不支持远程功能RAP…………………………………………………… 2-247 034-507 口令检查错误RAP……………………………………………………… 2-247 034-508 通过DTMF 删除传输RAP …………………………………………… 2-248 034-509 DTMF 非法程序错误RAP……………………………………………… 2-248 034-510 DTMF 程序错误RAP…………………………………………………… 2-249 034-511 远程机器不能发送文件RAP…………………………………………… 2-249 034-512 检测到无尽循环RAP…………………………………………………… 2-250 034-513 接收命令错误RAP……………………………………………………… 2-250 034-514 请求的功能不支持RAP………………………………………………… 2-251 034-515 非法命令被接收RAP…………………………………………………… 2-251 034-519 接收数量超出RAP……………………………………………………… 2-252 034-520 服务数量超出RAP……………………………………………………… 2-252 034-521 内部I/F 错误RAP ……………………………………………………… 2-253 034-522 无手动发送线路RAP…………………………………………………… 2-253 034-523 传真服务被禁止RAP…………………………………………………… 2-254 034-524 不能删除操作RAP……………………………………………………… 2-254 034-525 指定的链-环不存在RAP ……………………………………………… 2-255 034-526 不正确的链-环值RAP ………………………………………………… 2-255 034-527 拨号控制错误RAP……………………………………………………… 2-256 034-528 不能执行手动发送RAP………………………………………………… 2-256 034-529 无打印的纸张尺寸RAP………………………………………………… 2-257 034-530 DTMF I/F 超时RAP …………………………………………………… 2-257 034-700 G3 节Dicep 超时RAP ………………………………………………… 2-258 034-701 软件复位RAP…………………………………………………………… 2-258 034-702 无指定目标RAP………………………………………………………… 2-259 034-703 D 信道与网络连接切断RAP…………………………………………… 2-259034-704 ISDN D 信道数据连接错误RAP ……………………………………… 2-260 034-705 ISDN 层1 停止-电源ON ……………………………………………… 2-260 034-706 ISDN 层1 停止-电源OFF……………………………………………… 2-261 034-707 FRMR 被接收…………………………………………………………… 2-261 034-708 非法帧接收N（R）…………………………………………………… 2-262 034-709 非法帧接收……………………………………………………………… 2-262 034-710 …………………………………………………………………………… 2-263 034-711 等待连接超时…………………………………………………………… 2-263 034-712 内部错误（中断）……………………………………………………… 2-264 034-713 超时-传输删除…………………………………………………………… 2-264 034-714 线路断开-超时T305 …………………………………………………… 2-265 034-715 线路断开-超时3082 …………………………………………………… 2-265 034-716 连接超时（T313）……………………………………………………… 2-266 034-717 Resume 超时…………………………………………………………… 2-266 034-718 正常断开………………………………………………………………… 2-267 034-719 无空闲和有效线路……………………………………………………… 2-267 034-720 超时（60s,T330,309,301,310）……………………………………… 2-268 034-721 错误（格式化，内容）………………………………………………… 2-268 034-722 悬挂超时………………………………………………………………… 2-269 034-723 无指定计时器RAP……………………………………………………… 2-269 034-724 非法顺序RAP…………………………………………………………… 2-270 034-725 L3 任务内部错误RAP ………………………………………………… 2-270 034-726 HD81501 I/F 缓冲器忙RAP…………………………………………… 2-271 034-727 任务无响应（对1,300Hz 输入呼叫为3 秒）RAP ………………… 2-271 034-728 无效的目标RAP………………………………………………………… 2-272 034-729 线路切断，内部通道PB 发送RAP…………………………………… 2-272 034-730 输入和输出呼叫冲突…………………………………………………… 2-273 034-731 传真网络切断（设置错误）…………………………………………… 2-273 034-732 传真网络因超时而被切断……………………………………………… 2-274 034-733 不正确顺序，呼叫状态………………………………………………… 2-274 034-734 HI 任务内部错误RAP ………………………………………………… 2-275 034-735 只与ISDN D 信道连接………………………………………………… 2-275 034-736 来自传真网络的错误通知……………………………………………… 2-276 034-737 输入呼叫响应错误RAP………………………………………………… 2-276 034-738 层1 启动错误…………………………………………………………… 2-277 034-739 层1 不同步……………………………………………………………… 2-277 034-740 帧传输错误……………………………………………………………… 2-278 034-741 不能发送帧……………………………………………………………… 2-278 034-742 帧发送低速被检测……………………………………………………… 2-279 034-743 不正常发送帧DMA RAP ……………………………………………… 2-279 034-744 不能接受的信道RAP…………………………………………………… 2-280 034-745 呼出信道设置…………………………………………………………… 2-280 034-746 无可使用线路…………………………………………………………… 2-281 034-747 转换设备拥挤…………………………………………………………… 2-281034-748 指定线路无法使用……………………………………………………… 2-282 034-750 网络错误………………………………………………………………… 2-282 034-751 临时网络错误…………………………………………………………… 2-283 034-752 目标终端忙……………………………………………………………… 2-283 034-753 目标不应答……………………………………………………………… 2-284 034-754 无来自目标的响应……………………………………………………… 2-284 034-755 目标拒绝呼叫…………………………………………………………… 2-285 034-756 目标故障………………………………………………………………… 2-285 034-757 其它（正常，半正常）………………………………………………… 2-286 034-758 不正确目标传真拨号号码……………………………………………… 2-286 034-759 无中转网络路由………………………………………………………… 2-287 034-760 无到目标线路…………………………………………………………… 2-287 034-761 不正确格式目标传真号码……………………………………………… 2-288 034-762 设备拒绝………………………………………………………………… 2-288 034-763 通讯能力不允许………………………………………………………… 2-289 034-764 通讯能力未被配置……………………………………………………… 2-289 034-765 服务，性能限制带来的错误…………………………………………… 2-290 034-766 所选择的通讯不执行…………………………………………………… 2-290 034-767 所选模式不执行………………………………………………………… 2-291 034-768 只有有限数字信息……………………………………………………… 2-291 034-769 服务，性能产生的错误………………………………………………… 2-292 034-770 应答状态查询…………………………………………………………… 2-292 034-771 访问信息被放弃………………………………………………………… 2-293 034-772 工作之间连接错误……………………………………………………… 2-293 034-773 指定拨号号码无效……………………………………………………… 2-294 034-774 指定的线路无效………………………………………………………… 2-294 034-775 其他（无效信息类）…………………………………………………… 2-295 034-776 所需信息不够…………………………………………………………… 2-295 034-777 不明确的信息类型……………………………………………………… 2-296 034-778 不正确信息或类型……………………………………………………… 2-296 034-779 无信息或未定义………………………………………………………… 2-297 034-780 无效信息………………………………………………………………… 2-297 034-781 呼叫状态，信息不匹配………………………………………………… 2-298 034-782 因超时而被错误清除…………………………………………………… 2-298 2nd Version 09/2004 状态-指示-维修DC236/286 2-5034-783 其它错误（操作等）…………………………………………………… 2-299 034-784 目标号码改变…………………………………………………………… 2-299 034-785 不兼容目标……………………………………………………………… 2-300 034-786 呼叫识别码不在使用中………………………………………………… 2-300 034-787 呼叫识别码在使用中…………………………………………………… 2-301 034-788 显示其它原因…………………………………………………………… 2-301 034-789 G4 表示层非法事件…………………………………………………… 2-302 034-790 线路1 未被连接RAP…………………………………………………… 2-302034-791 线路0（分机）未被连接RAP ………………………………………… 2-303034-792 线路2 未被连接RAP…………………………………………………… 2-303034-793 线路3 未被连接RAP…………………………………………………… 2-304034-794 线路4 未被连接RAP…………………………………………………… 2-304034-795 线路5 未被连接RAP…………………………………………………… 2-305034-796 拨号错误（不正确传真号码2）RAP ………………………………… 2-305034-797 通讯参数错误RAP……………………………………………………… 2-306034-798 数据参数错误RAP……………………………………………………… 2-306034-799 自动拨号无拨号数据RAP……………………………………………… 2-307035-xxx 传真网络035-700 Modem 故障RAP ……………………………………………………… ___________2-309035-701 T1 传输超时RAP ……………………………………………………… 2-309035-702 目标接收被拒绝RAP ………………………………………………… 2-310035-703 以相位B 发送时接收到DCN RAP …………………………………… 2-310035-704 目标轮询错误RAP……………………………………………………… 2-311035-705 DCS/NSS 重新发送超限RAP ………………………………………… 2-311035-706 减速运行错误RAP …………………………………………………… 2-312035-707 错误的口令/接收错误RAP …………………………………………… 2-312035-708 后-信息重发超限RAP ………………………………………………… 2-313035-709 RTN 接收RAP ………………………………………………………… 2-313035-710 PIN 接收RAP…………………………………………………………… 2-314035-711 DCN 接收在相位D RAP ……………………………………………… 2-314035-712 3 NSC 后无响应RAP ………………………………………………… 2-315035-713 发送FTT 之后T2 超时RAP…………………………………………… 2-315035-714 NSC/DTC 之后接收到DCN RAP……………………………………… 2-316035-715 错误口令-轮询错误RAP ……………………………………………… 2-316035-716 无后信息-T2 超时RAP ………………………………………………… 2-317035-717 RTN 发送RAP ………………………………………………………… 2-317035-718 接收T1 超时RAP ……………………………………………………… 2-318035-719 检测到忙音RAP………………………………………………………… 2-318035-720 不能被远程机器接收RAP……………………………………………… 2-319035-721 DCN 接收在相位B RAP ……………………………………………… 2-319035-722 错误的300bps 帧长度RAP …………………………………………… 2-320035-723 接收标记之后无CD RAP ……………………………………………… 2-320035-724 发送FTT 之后接收DCN RAP ………………………………………… 2-321035-725 远程机器没有邮箱/中继RAP ………………………………………… 2-321035-726 相位C 不能接收-10 秒RAP…………………………………………… 2-322035-727 G3 接收期间50%错误RAP…………………………………………… 2-322035-728 C EOL 不能在10 秒之内接收RAP…………………………………… 2-323035-729 检测到载波减弱RAP…………………………………………………… 2-323035-730 相位C 高速无CS RAP………………………………………………… 2-324035-731 传真V.8 错误RAP ……………………………………………………… 2-324035-732 传真V.34 PCH CD Off RAP ………………………………………… 2-325035-733 传真V.34 C/PCH CS 无RAP………………………………………… 2-325 035-734 远程V8 程序轮询错误RAP …………………………………………… 2-326 035-735 轮询箱V8 程序中无文件RAP ………………………………………… 2-326 035-736 发送CTC 之后无应答DCN RAP……………………………………… 2-327 035-737 发送EOR 之后无应答DCN RAP……………………………………… 2-327 035-738 发送RR 之后无应答DCN RAP ……………………………………… 2-328 035-739 传真15 超时RAP ……………………………………………………… 2-328 035-740 E-OR 发送之后发送停止RAP ………………………………………… 2-329 035-741 ECM 相位C 标记超时RAP …………………………………………… 2-329 035-742 EOR 发送或接收RAP ………………………………………………… 2-330 035-743 远程机器不能接收SUB RAP ………………………………………… 2-330 035-744 远程机器不能接收口令RAP…………………………………………… 2-331 035-745 PTX 无SEP 功能RAP ………………………………………………… 2-331 035-746 忙-不能检测拨号音RAP ……………………………………………… 2-332 035-747 拨号时中止RAP………………………………………………………… 2-333 035-748 传输期间中止RAP……………………………………………………… 2-333 035-749 无来自远程站的应答RAP……………………………………………… 2-334 035-750 传输期间电源Off RAP ………………………………………………… 2-334 035-751 文件发送操作被删除RAP……………………………………………… 2-335 035-752 作业数限制错误RAP…………………………………………………… 2-335 035-753 传真存储器满RAP……………………………………………………… 2-336 035-754 文件管理存储器满RAP………………………………………………… 2-336 035-755 文件加页错误RAP……………………………………………………… 2-337 035-756 不能加页RAP…………………………………………………………… 2-337 035-757 无接收页RAP…………………………………………………………… 2-338 035-758 无指定文件或页RAP…………………………………………………… 2-338 035-759 无指定作业RAP………………………………………………………… 2-339 035-760 文件公共处理错误RAP………………………………………………… 2-339 035-761 文件其它处理错误RAP………………………………………………… 2-340 035-762 ISDN 期间线路切断RAP ……………………………………………… 2-340 036-xxx 传真参数036-500 非法PDRP 参数………………………………………………………… 2-341 036-501 非法RDPBP 参数……………………………………………………… 2-341 036-502 非法RDPBN 参数……………………………………………………… 2-342 036-503 非法RDCLP 参数……………………………………………………… 2-342 036-504 非法RDGR 参数………………………………………………………… 2-343 036-505 未定义响应……………………………………………………………… 2-343 036-506 不可协商………………………………………………………………… 2-344 036-507 在容量满时接收RDPBN ……………………………………………… 2-344 036-508 RDPBN 接收终端错误………………………………………………… 2-345 036-509 RDPBN 接收其它……………………………………………………… 2-345 036-510 RDGR 接收……………………………………………………………… 2-346 036-511 非法程序1551 RAP …………………………………………………… 2-346 036-512 非法CDS 参数………………………………………………………… 2-347。

HP OpenView Omniback II 4.1Platform & Integration support matrixVersion: 1.7 Date: October 24, 2003NOTE: For the following Omniback II components, only those “Omniback component-Operating System” combinations are supported for which the corresponding Operating System version is supported by the respective vendors.omniback II componentsupported operating systemsCell Manager• Windows NT 4.0 • Windows 2000 • Windows XP PRO• HP-UX 10.20, 11.03, 11.113, 11.203,5 Graphical User Interface• Windows 98 1• Windows ME 1 • Windows NT 4.0 • Windows 2000 • Windows XP HE • Windows XP PRO• HP-UX 10.20, 11.03, 11.113, 11.203,5 Managers-of-Managers (MoM)• Windows NT 4.0 • Windows 2000 • Windows XP PRO• HP-UX 10.20, 11.03, 11.113, 11.203,5 Backup Device Server (media agent), including robotic control• Windows NT 4.0 • Windows 2000 • Windows XP PRO• Novell NetWare 6 4.11, 4.2, 5.0, 5.1, 6.07• HP-UX 10.20, 11.03, 11.113, 11.203,5, 11.223 &5• Sun Solaris 42.6, 7 , 8•For Windows NT PCs, the following SCSI interface cards are supported: AMD, Adaptec, Symbios• MPE/iX 66.0, 6.5 • Linux Red Hat 6.x,7.x,8.x • Linux SuSe 6.x, 7.x, 8.x Backup Device Server (media agent), without robotic controlThe above list plus the following: • IBM AIX 4.3.x, AIX 5.1, 5.28• SNI Sinix 5.4.3, 5.4.4•SCO OpenServer 5.0.5 (Compaq)1The following limitations apply:• Browsing the Microsoft Windows Network is disabled. • Only US English version of GUI is supported.• Only local installation direct from installation CD-ROM is supported.2The following limitation applies: The Backup Agent on Unixware 7.1.1 can only be installed locally and not via push installation. 3 NIS+ is not supported.4 For Solaris – SunOS version compatibility, please refer to the Sun OS support matrix. 5HP-UX 11.11 is pHP-UX 11i version 1.0. HP-UX 11.20 is HP-UX 11i version 1.5. HP-UX 11.22 is HP-UX 11i version 1.66 Push installation not possible, need to be installed locally7For Netware 6.0 support, the patch OMNIBACK_00059 needs to be installed. DA & MA do not take advantage of the new features introduced by NSS 3.0 8 To utilize this feature, the patch PHSS_28584 is required 9 To utilize this feature, the patch PHSS_28232 is required 10To utilize this feature, the patch PHSS_28336 is requiredoperating systemsupported processor platformHP-UX PA-RISC or IA-642Windows XPIntel, IA-32, or AMDBackup Agents (disk agents)• Windows NT 4.0 • Windows XP HE 6 • Windows 956 • Windows 986 • Windows ME 6 • Windows 2000 • Windows XP PRO• Novell NetWare 64.11, 4.2,5.0, 5.1,6.07• HP-UX 10.20, 11.03, 11.113, 11.203,5, 11.223&5 • HP MPE/iX 6, 6.0, 6.5 • Sun Solaris 4 2.6, 7, 8• IBM AIX 4.3.x, 5.1, 5.28• SGI IRIX 6.4, 6.5• SNI Sinix 5.4.3, 5.4.4• SCO OpenServer 5.0.5, SCO Unixware 7.x 2 • Digital UNIX/Tru64 Unix 4.0x • Tru64 UNIX version 5.0, 5.1x • MP-RAS NCR V4_3.0• DYNIX Sequent Intel 4.4.26• Linux – Red Hat Distribution 6.x, 7.x, 8.x 9• Linux – SuSE 6.x, 7.x, 8.x 10• Caldera OpenLinux 2.4x, 3.1.1 • Debian Linux v2.2.r3, 3.0• Additional UNIX platforms via NFS •Additional platforms via shared disksWindows NT 1Intel, IA-32, or AMDWindows 2000 Intel, IA-32, or AMDLinux – Red Hat Distribution Intel, IA-32, or AMDLinux – SuSE Intel, IA-32, or AMDLinux --- Debian Intel, IA-32Sun Solaris SPARC1The Windows NT 4.0 Backup Agent (disk agent) is also supported on Alpha Systems.2 Supported in Emulation modeNOTE: For the following integration matrices, only those combinations of applications and operating systems that are supported by the respective vendors are supported by HP OpenView Omniback II.application agents supported databases / integrationsOracle (32-bit) (including Oracle Parallel Server and RAC) • Oracle 7.3.4/EBU 2.2 : HP-UX 10.20(32-bit), 11.0 (32 & 64-bit)Windows NT 4.0Solaris 2.6 (32-bit)AIX 4.3.x• Oracle 8.0.x/Recovery Manager : HP-UX 10.20 (32-bit), 11.0 (32 & 64-bit)Windows NT 4.0Solaris 2.6 (32-bit), 7 (32 & 64-bit)AIX 4.3.x• Oracle 8.1.x/Recovery Manager : HP-UX 11.0 (32 & 64-bit), 11.11(32 & 64-bit) Solaris 7, 8 (32 & 64-bit)AIX 4.3.x, AIX 5.16, 5.26, 8Windows NT 4.0, Windows 2000Linux - Red Hat Distribution 6.x , 7.xLinux – Suse 7.x• Oracle 9i/Recovery Manager9 : Solaris 7 & 8 (32-bit)Linux – Red Hat 7.x, 8.x6SuSE 7.x, 8.x6Windows NT 4.0, Windows 2000Oracle (64-bit) (including Oracle Parallel Server and RAC)• Oracle 8.0.x/Recovery Manager : HP-UX 11.0 (64-bit)• Oracle 8.1.x/Recovery Manager: HP-UX 11.0 (64-bit), 11.11(64-bit) Solaris 7 & 8 (64-bit)AIX 4.3.3 (64-bit)10AIX 5.1 (64-bit)6, 5.2 (64-bit)6, 8Tru64 5.x (64-bit)10• Oracle 9i/Recovery Manager9 : HP-UX 11.0 (64-bit), 11.11 (64-bit)Solaris 7 & 8 (64-bit)AIX 4.3.3 (64-bit)10AIX 5.1 (64-bit)6, 5.2 (64-bit)6, 8Tru64 5.x (64-bit)10Informix (32-bit) • Informix 7.24 : HP-UX 10.20, 11.0 (32-bit)Sinix 5.4.3Solaris 7 (32-bit)• Informix 7.3x : HP-UX 10.20 (32-bit), 11.0 (32 & 64-bit), 11.11 (32 & 64 bit)Sun Solaris 2.6 (32-bit), 7 & 8 (32 & 64-bit)AIX 4.3.xWindows NT 4.0• Informix XPS 8.2x : HP-UX 11.0 (32 & 64-bit)• Informix XPS 8.3x : HP-UX 11.0 (32 & 64-bit), 11.11 (32 & 64-bit)• Informix IDS 9.2x : HP-UX 11.0 (32 & 64-bit), 11.11 (32 & 64-bit)Solaris 7, 8 (32 & 64-bit)Windows 2000• Informix IDS 9.3x : HPUX 11.0 & 11.11 (32 & 64-bit)Solaris 2.6 (32-bit), Solaris 7 & 8 (32 & 64-bit)AIX 4.3.3 (32 & 64-bit)Windows 20005Informix (64-bit) • Informix 7.31 : HP-UX 11.0 (64-bit)Solaris 7 & 8 (64-bit)AIX 4.3.x (64-bit)• Informix XPS 8.2x : HP-UX 11.0 (64-bit)• Informix XPS 8.3x : HP-UX 11.0 (64-bit), 11.11 (64-bit)• Informix IDS 9.2(0,1)1 : HP-UX 11.0 (64-bit), 11.11 (64-bit)Solaris 7 & 8 (64-bit)• Informix IDS 9.3x : HPUX 11.0 (64-bit), 11.11(64-bit)Solaris 7 & 8 (64-bit)AIX 4.3.3 (64-bit)Sybase (32-bit) • Sybase SQL Server 11.1 : HP-UX 10.20• Sybase Adaptive Server 11.5: HP-UX 10.20 (32-bit), 11.0 (32 & 64-bit)Solaris 2.6 (32-bit), 7 (32 & 64-bit)• Sybase Adaptive Server 11.9.2 : HP-UX 10.20 (32-bit), 11.0 (32 & 64-bit)• Sybase Adaptive Server 11.9.2 : Windows NT 4.0—requires 11.9.2.1 ESD #1maintenance release or later; contact Sybase support for details• Sybase Adaptive Server 12.0 : HP-UX 11.0, 11.11 (32 & 64-bit)Solaris 7 & 8 (32 & 64-bit)Windows 2000Windows NT 4.0• Sybase Adaptive Server 12.5 : HP-UX 11.0 , 11.11 (32 & 64-bit)Solaris 7 & 8 (32 & 64-bit)Windows NT 4.0, Windows 2000Sybase (64-bit) • Sybase Adaptive Server 11.9.3 : HP-UX 11.0 (64-bit), 11.11 (64-bit)Solaris 7, 8 (64-bit)• Sybase Adaptive Server 12.0 : HP-UX 11.0 (64-bit), 11.11 (64-bit)Solaris 7 & Solaris 8 (64-bit)• Sybase Adaptive Server 12.5 : HP-UX 11.0 (64-bit), 11.11 (64-bit)Solaris 7 & 8 (64-bit)Microsoft SQL Server • Microsoft SQL Server 7.0 : Windows NT 4.0• Microsoft SQL Server 7.0 : Windows 2000• Microsoft SQL Server 2000 : Windows 2000Microsoft Exchange Server • Microsoft Exchange Server 5.0 : Windows NT 4.0• Microsoft Exchange Server 5.5 : Windows NT 4.0• Microsoft Exchange Server 5.5 : Windows 2000• Microsoft Exchange Server 2000 : Windows 2000• Microsoft Exchange Server 5.5 – Single mailbox restore - Windows NT 4.0Windows 2000• Microsoft Exchange Server 2000 – Single mailbox restore : Windows 2000 SAP 2 & 4 (32-bit) • SAP R/3 3.1x : HP-UX 10.20, 11.0 (32-bit)AIX 4.3.x (32-bit)Windows NT 4.0• SAP R/3 4.0 : HP-UX 10.20 (32-bit), 11.0 (32 & 64-bit)AIX 4.3.xWindows NT 4.0• SAP R/3 4.5, using RMAN mode : HP-UX 10.20 (32-bit), 11.0 (32 & 64-bit)Windows NT 4.0, Windows 2000• SAP R/3 4.5, using backint mode : HP-UX 10.20 (32-bit), 11.0 (32 & 64-bit)AIX 4.3.xSolaris 2.6 (32-bit), 7, 8 (32 & 64-bit)Windows NT 4.0, Windows2000• SAP R/3 4.6x, using RMAN mode : HP-UX 10.20 (32-bit), 11.0 (32 & 64-bit)HP-UX 11.11 (32 & 64-bit)Windows NT 4.0, Windows 2000Solaris 7 & 8 (32 & 64-bit)• SAP R/3 4.6x, using backint mode: HP-UX 10.20 (32-bit), 11.0 (32 & 64-bit)HP-UX 11.11 (32 & 64-bit)Linux Suse 7.xAIX 4.3.xSolaris 7, 8(32 & 64-bit)Windows NT 4.0Windows 2000• SAP R/3 Enterprise 4.7x, using backint & RMAN mode: Windows 2000Linux SuSe 8.x• SAP Brtools 6.10, using backint & RMAN mode: : Windows NT4.0Windows2000Linux Suse 7.x• SAP Brtools 6.20, using backint & RMAN mode: :Windows2000Linux Suse 8.xSAP 2 & 4 (64-bit) • SAP R/3 4.0 : HP-UX 11.0 (64-bit)• SAP R/3 4.5, using backint and RMAN mode : HP-UX 11.0 (64-bit)• SAP R/3 4.6x, using backint mode : HP-UX 11.0 (64-bit), 11.11(64-bit)• SAP R/3 4.6x, using RMAN mode: HP-UX 11.0 (64-bit), 11.11(64-bit)Solaris 7 & 8 (64-bit)AIX 4.3.3 (64-bit)11, 5.1 (64-bit), 5.2 (64-bit)10• SAP R/3 Enterprise 4.7x : HP-UX 11.0 (64-bit), 11.11(64-bit)(using backint & RMAN mode) Solaris 9 (64-bit)Tru64 5.xx (64-bit)11AIX 5.1 (64-bit), 5.2 (64-bit)10• SAP Brtools 6.10 : HP-UX 11.0 (64-bit), 11.11(64-bit)(using backint & RMAN mode Solaris 7 & 8 (64-bit)AIX 4.3.3 (64-bit)11AIX 5.1 (64-bit), 5.2 (64-bit)10Tru64 5.xx (64-bit)11• SAP Brtools 6.20 : HP-UX 11.0 (64-bit), 11.11(64-bit)(using backint & RMAN mode) Solaris 9 (64-bit)Tru64 5.xx (64-bit)11AIX 5.1 (64-bit), 5.2 (64-bit)10Baan IV 3• Baan IV on Oracle, Informix, and Microsoft SQL Server (see versions above) Lotus Notes, Lotus Domino • Lotus Domino/Notes R5 : HP-UX 11.0 (32 & 64-bit), HPUX 11.11 (32 & 64-bit)(Online Integration) AIX 4.3.xWindows NT 4.0, Windows 20001Chain restore is not working for Informix ODS 9.20.FC1 (64-bit) and earlier versions.2Omniback II uses the official SAP backup/restore API (BRTOOLS), which is available only in conjunction with the Oracle database. Therefore, Omniback II support is only dependent on the SAP brtools version (as supported by SAP in combination with various SAP Kernels) but is independent of the Oracle version.3 Baan users with Oracle, Informix, or Sybase databases can back up their application data byfollowing the instructions for the integration of Omniback II and their database in the HPOpenView Omniback II Integration Guide.4 If you have SAP & Oracle 9i combination, following patches are required for it to besupported:OMNIBACK_00097 – For Windows Installation ServerPHSS_28723 – For HP-UX Installation Server5 To utilize this feature the patch OMNIBACK_00094 is required6 To utilize this feature the patch PHSS_28582 is required7The whitepaper is located on the CD-ROM “HP OpenView Omniback II for WindowsNT/2000” in the folder:\Product_Information\Whitepapers & Service Deployment.8 To utilize this feature, the patch PHSS_28584 is required9 Oracle 9i includes all released versions of Oracle 9.x.x.x10 To utilize this feature, the patch PHSS_28584 is required11To enable this feature the Patch(es) PHSS_26888/PHSS_26887 is required. application supported versionsHP OpenView VantagePoint Operations • VPO Management Server:VPO 6.0 : HP-UX 10.20, 11.0Service Navigator : HP-UX 10.20, 11.0• VPO Managed Node (Omniback Cell Server)VPO Agent 6.05 : HP-UX 10.20, 11.0, 11.11VPO Agent 6.03 : Windows NT 4.0, Windows 2000VP Performance Agent C.03.20 : HP-UX 10.20, 11.0, 11.11VP Performance Agent C.03.00 : Windows NT 4.0, Windows 2000HP OpenView ManageX HP OpenView ManageX 3.5, 4.0, 4.2 : Windows 4.0, Windows 2000 HP OpenView OmniStorage • HP OpenView OmniStorage 3.0 : HP-UX 10.20• HP OpenView OmniStorage 3.11: HP-UX 10.20, 11.0• HP Openview Omnistorage 3.12 : HP-UX 10.20, 11.0HP Openview Network Node Manager1 • HP Openview Network Node Manager 6.2 : HPUX 10.20, 11.0Windows NT 4.0, Windows 20001Omniback II integrates with the Solid database in Network Node Manager for an online backup of the database.array type supportedHP SureStore XP 1• HP SureStore Business Copy XP/Continuous Access XPEMC 2• EMC TimeFinder/SRDFHP SureStore Virtual array3• HP SureStore Business Copy VA1Please refer to the “HP OpenView Omniback II 4.1 Zero Downtime (Split-mirror) backup & Instant Recovery Support Matrix for HP Storageworks XP Disk Array” for further details on the integration.2Please refer to the “HP OpenView Omniback II 4.1 EMC split-mirror backup integration Support Matrix” for further details on the integration.3 Please refer to the “HP OpenView Omniback II 4.1 Zero Downtime Backup & Instant RecoverySupport Matrix for HP Storageworks Virtual Array 7100 & 7400” for further details on the integration.NAS applicationSupported versionsNDMP• NetApp Filer ONTAP version 5.3.x, 6.x, NDMP v2 : HP-UX 11.0 Solaris 7 & 8 Windows NT 4.0 Windows 2000 • EMC Celerra(Symmetrix Network File Storage,Version: T2.2.49 or higher)1 : HP-UX 11.0 Solaris 7 & 8 Windows NT 4.0 Windows 2000 HP NAS 80002• NAS 8000 Linux 2.4.17HP NAS B3000/e70002• Windows 20001 Documentation available only in the HP OpenView Omniback II 4.1 release notes.2For supported devices, please refer to the device support matrices of the respective NASvendors. Only those devices that are supported by the respective NAS vendors and are also listed in HP OpenView Omniback II 4.1 Device Support Matrix as supported, are supported.application agentssupported databases / integrationsHP OpenView Omniback II Open File Manager•HP OpenView Omniback IIOpen File Manager 7.x : Windows NT 4.0Windows 2000 Novell NetWare 4.x, 5.x •HP OpenView Omniback II Open File Manager 8.x : Windows NT 4.0 Windows 2000 Novell NetWare 4.x, 5.x Novell Netware 6.011 To utilize this feature, Omniback patch OMNIBACK_00093 is requiredoperating systemfile systemsWindows NT• NTFS • FAT •CIFScluster softwaresupported cluster software versionHP MC/ServiceGuard• HP MC/ServiceGuard 10.xx : HP-UX 10.20 • HP MC/ServiceGuard 11.xx : HP-UX 11.0 •HP MC/ServiceGuard 11.xx : HP-UX 11.11 Microsoft Cluster Server •Microsoft Cluster Server : Windows NT 4.0Windows 2000Windows 2000/XP• NTFS 5.0 (including Image Backup)• FAT16, FAT32• CIFSWindows 98 • FAT• VFAT• FAT32Windows 95 • FAT• VFAT• FAT32Novell NetWare • NetWare FSsupported namespaces: MAC, NFS, NSS1, OS/2(long namespace), DOSHP-UX • HFS (including Raw disk)• NFS (including NFS3 on HP-UX 10.30 and higher)• LOFS (Loopback FS)• Cache FS• VxFS (10.x, 11.x) (including Raw disk)• DCE DFS (10.20 only)Solaris3 • UFS• PC FS (MSOS compatible FS)• HSFS• VxFS4• Tmp FS• LOFS (Loopback FS)Linux (Red Hat, SuSe, Debian & Caldera)3 • ext2, ext, minix, xiafs, ReiserFS, ext32IBM AIX3 • AIX physical FS “oaix”• JFS (Journaling FS)SGI IRIX3 • EFS (Extent File System)• XFS (IRIX Journaling FS)SNI Sinix3 • HSFS (High Sierra FS)• UFS (UNIX File System)• VxFSSCO OpenServer3 • HTFS (High Throughput FS)• DTFS• S51K• S52KSCO Unixware3 • memfs• s5• sfs (Note: ACLs are not backed up and restored.)• ufs• bfs• vxfs (Note: ACLs are not backed up and restored.) Digital UNIX Alpha Systems/Tru64 UNIX3 • UFS (UNIX FS)• AdvFS (Advanced File System)MP-RAS NCR Intel • BFS (Boot File System)• Cache FS• S5 FS• UFS (UNIX File System)• VxFS• LOFS (Loopback FS)DYNIX Sequent • UFS (UNIX File System)• VxFS1Novell NetWare NSS is supported, with the following limitations:• The new NSS volumes on NetWare 5.0 allow creation of deep directory structures (deeper than 100). Omniback II can back up only to a depth of 100.• NetWare 5.0 NSS volumes allow 8 TB file size, but the maximum file size that Omniback II backs up is 4 GB.NetWare 5.0 has an NSS_ADMIN volume on every system with NSS volumes present. This isa special read-only volume that contains information about NSS volume configuration.NSS_ADMIN is not backed up.2 To utilize ext3 support, the patches PHSS_25965/PHSS_25964 must be installed.3 Raw Disk Backup is supported. In case of Tru64, it is not supported if LSM is installed4 VxFS attributes backup is only supported for Solaris 2.6operating system file system number of ACL entries(basic/extended)Windows NT NTFS < 2 GBWindows NT FAT < 2 GBWindows 2000 NTFS 5.0 < 2 GBWindows XP Pro NTFS 5.0 < 2 GB512Novell NetWare NetWare FS (MAC, NFS, OS/2,DOS) 1Novell Netware NSS UnlimitedHP-UX HFS 3/16HP-UX VxFS (10.x, 11.x) 4/17 (JFS 3.3 & 4)HP-UX DCE DFS (10.20 only) 3/8188IBM AIX AIX (Physical FS “oaix”) 1024 (4096 bytes)1Limited with Omniback II record size and SMS API.。

acitivity monitor 参数的解释Activity Monitor 是一个图形化的监控工具，用于监视和分析系统性能。

它可以帮助用户了解系统的运行状态、资源使用情况、进程活动等。

Activity Monitor 提供了多个参数和指标，以便用户评估系统性能和诊断问题。

以下是Activity Monitor 的一些常见参数和解释：1. CPU Usage：显示CPU 的使用情况，包括当前占用率、用户态占用率、系统态占用率等。

2. Memory Usage：显示内存的使用情况，包括总内存、可用内存、已使用内存、缓存内存等。

3. Disk Activity：显示磁盘活动的状态，包括磁盘读写速度、磁盘使用率、磁盘队列长度等。

4. Network Activity：显示网络活动的状态，包括网络传输速度、网络连接数、网络错误等。

5. Processes：显示当前运行的进程列表，包括进程ID、进程名称、进程状态等信息。

6. Top Processes：显示当前占用资源最多的进程列表，包括进程ID、进程名称、CPU 使用率、内存使用量等信息。

7. System Activity：显示系统活动的状态，包括系统负载、系统缓存、文件系统等信息。

8. Network Connections：显示当前的网络连接列表，包括连接状态、连接协议、本地地址等信息。

9. System Security：显示系统的安全设置和登录信息，包括防火墙状态、加密设置、登录用户等信息。

这些参数可以帮助用户了解系统的运行状态和资源使用情况，从而进行性能优化和问题诊断。

同时，Activity Monitor 还提供了丰富的图表和报告功能，方便用户进行数据分析和可视化展示。

Graphics Card RequirementComputer with Mini DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode. Backward compatible with most Mini DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed. MST compliant DisplayPort 1.2 graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.Maximum supported video resolutions and number of monitors depend on your graphics card. Check graphics card specifications to determine its capabilities.2-Port Mini DisplayPort to DVI Multi-Monitor Splitter, MST Hub, DP1.2, TAAMODEL NUMBER:B155-002-DVI-V2Displays the same image on 2 DVI monitors, extends the desktop across them, or combines both into one large monitor. Ideal for digital signage in schools, churches, conference rooms, trade shows and retail outlets.DescriptionThe B155-002-DVI-V2 2-Port Mini DisplayPort 1.2 to DVI MST Hub connects two DVI monitors to the Mini DisplayPort output on your computer. Ideal for digital signage in schools, churches, conference rooms, trade shows, hotels and retail outlets, this hub allows you to display the same image on both monitors, extend the desktop across them, or combine both as one large monitor in video wall mode.The B155-002-DVI-V2 is compliant with Mini DisplayPort 1.2 and backward compatible with versions 1.1 and 1.1a with the feature set being limited to that of your equipment. It supports high-definition video resolutions up to 1080p @ 60 Hz (1920 x 1080) on each monitor. Expanded video resolutions are supported when displaying in video wall mode, such as 3840 x 1080 in a horizontal 1 x 2 monitor configuration or 1920 x 2160 in a vertical 2 x 1 monitor configuration. The B155-002-DVI-V2 also supports HDCP, EDID, DDC and 48-bit Deep Color (16 bits per channel), as well as DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio.This MST hub works with all operating systems. Plug-and-play convenience means no software, drivers or external power supply is needed. A built-in six-inch cable connects directly to a Mini DisplayPort source. LEDs indicate when the monitors are receiving a signal. The B155-002-DVI-V2 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.Features HighlightsSupports HD video resolutionsup to 1080p @ 60 Hz (1920 x1080)qBuilt-in 6 in. cable connectsdirectly to Mini DisplayPortsourceqSupports up to 48-bit DeepColor (16 bits per channel)qWorks with all operatingsystemsqSupports DTS-HD, DolbyTrueHD and 7.1-channelsurround soundqSystem RequirementsComputer with Mini DisplayPort1.2-compatible graphics card(e.g. AMD Radeon with AMDEyefinity) required for video wall mode.qBackward compatible with mostMini DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibilitywith older graphics cards notguaranteed.qMac OS X does not supportMST for NVIDIA and IntelGraphics Processor Units,limiting video display onconnected monitors to mirrormode.qMaximum supported videoresolutions and number ofmonitors depend on yourgraphics card. Check graphicscard specifications to determine its capabilities.qMonitor(s) with DVI input.qPackage IncludesB155-002-DVI-V2 2-Port MiniDisplayPort 1.2 to DVI MST Hub qUSB Micro-B cable, 3 ft.qOwner’s manualqSpecificationsConnects 2 DVI Monitors to Your Computer’s Mini DisplayPort Output Ideal for digital signs inschools, churches, conference rooms, trade shows and retail settingsDisplays same image on 2 monitors simultaneously in mirror modeExtends desktop across 2 monitors in extended modeCombines 2 monitors into one large monitor in video wall modeBuilt-in 6 in. cable connects directly to Mini DisplayPort sourceLEDs indicate when monitors are receiving a signalMeets the Latest Performance Standards Supports HD video resolutions up to 1080p @ 60 Hz (1920 x 1080)Expanded video resolutions are supported in video wall mode, such as 3840 x 1080 in a horizontal 1x 2 monitor configuration or 1920 x 2160 in a vertical 2 x 1 configurationSupports HDCP, EDID andDDCSupports 48-bit Deep Color (16 bits per channel)Supports DTS-HD, Dolby TrueHD and 7.1-channel surround sound audioEasy to Use Almost Anywhere Works with all operating systemsPlug and play—no software, drivers or external power supply requiredIncluded USB Micro-B cable provides powerTAA Compliant Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases© 2023 Eaton. All Rights Reserved. Eaton is a registered trademark. All other trademarks are the property of their respective owners.。

“Temporary failure in name resolution”通常表示在解析域名时发生了问题，无法找到相应的IP地址。

这可能是由于多种原因，包括但不限于DNS设置错误、网络连接问题、防火墙设置等。

要解决这个问题，你可以尝试以下步骤：
1.
检查你的DNS设置。

在Linux系统中，你可以查看/etc/resolv.conf文件，看看nameserver字段是否设置正确。

如果设置不正确，你可以尝试修改它，或者添加正确的DNS服务器地址。

2.
尝试重启网络服务。

在终端中运行以下命令：
shell复制代码
sudo service network-manager restart
或者
shell复制代码
sudo /etc/init.d/network-manager restart
3.
如果问题仍然存在，可能是防火墙设置阻止了网络连接。

你可以尝试关闭防火墙或者打开相应的端口。

在Linux系统中，你可以使用以下命令关闭防火墙：shell复制代码
sudo systemctl disable firewalld
请注意，以上操作可能因不同的操作系统和网络环境而有所不同。

如果问题仍然存在，你可能需要寻求专业的技术支持帮助。

Dell™ Media Center用户指南w w w.d e l l.c o m|s u p p o r t.d e l l.c o m注和注意注：注表示可以帮助您更好地使用计算机的重要信息。

注意：注意表示可能会损坏硬件或导致数据丢失，并告诉您如何避免此类问题。

____________________本说明文件中的信息如有更改，恕不另行通知。

©2005-2006Dell Inc.。

版权所有，翻印必究。

未经 Dell Inc.书面许可，严禁以任何形式进行复制。

本文中使用的商标：Dell、DELL徽标为 Dell Inc. 的商标；Microsoft和Windows为 Microsoft Corporation 的注册商标。

本说明文件中述及的其它商标和产品名称是指拥有相应商标和产品名称的公司或其制造的产品。

Dell Inc. 对其它公司的商标和产品名称不拥有任何所有权。

2006 年 2 月P/N XF933修订版 A01目录1快速启动可选遥控器按钮 (5)启动 Media Center (7)退出 Media Center (7)播放 DVD (7)播放 DVD 电影 (8)播放驱动器中已有的 DVD (9)在调整大小后的窗口中观看 DVD 电影 (9)查看图片（数码照片） (9)在 Media Center 中查看图片 (10)以幻灯片形式查看图片 (10)排列图片 (11)查看配有音乐的幻灯片 (11)2如果您的计算机带有可选的电视调谐器收看电视节目 (13)电视收视指南 (13)使用电视收视指南 (14)录制电视节目 (15)使用电视收视指南录制节目 (15)使用“Search”（搜索）选项录制电视节目 (16)手动录制电视节目 (18)更改电视收视指南设置 (19)更改录制优先级 (19)观看录制的电视节目 (20)播放录制的电视节目 (20)目录33其它功能使用“My Music”（我的音乐） (21)将 CD 复制到媒体库 (21)使用可选遥控器创建队列并将其另存为播放列表 (22)播放音乐 (22)使用“My Videos”（我的视频） (24)组织视频 (24)播放数字视频 (25)使用“More Programs”（其他程序） (25)使用可选遥控器同步设备（同步） (25)索引 (27)4目录快速启动Dell™ Media Center 是集多种功能于一体的计算机娱乐中心。

win10开机错误提⽰checkingmedia怎么办checkingmedia解决教程
win10开机出现错误提⽰checkingmedia的解决⽅法步骤！最近很多⽤户发现电脑开机的时出现了checking media的错误提⽰导致⽆法开机，时什么原因造成的呢？当遇到checking media错误提⽰时该怎么解决呢？还有不知道的朋友⼀起和⼩编⼀起详细了解下吧！
解决⽅法
解决此问题需要下载“diskgenius分区⼯具”：
dg磁盘分区⼯具(DiskGenius) v5.2.0.884 中⽂免费绿⾊版 64位
类型：磁盘光盘
⼤⼩：35.7MB
语⾔：简体中⽂
时间：2019-10-27
查看详情
1、⾸先，进⼊安装系统的pe界⾯，打开diskgenius分区⼯具，将硬盘重新分区，分成mbr格式
2、然后进bios，切换到securlty选项，选择source boot回车进⼊下⼀⼦菜单，
3、然后选择source boot，设置为disabled，
4、接着切换到startup选项，选择csm，回车改为enabled，
5、完成上⾯的设置，可以按照平常⽅法进⾏安装系统，
6、以上就是解决开机checking media错误提⽰的⽅法
以上就是⼩编给⼤家分享的win10开机错误提⽰checkingmedia的解决⽅法步骤了，希望此篇教程能够帮助到你。

Silverlight：MediaElement状态-电脑资料可以通过使用CurrentState 属性检测MediaElement 状态，通过使用 CurrentStateChanged 事件检测状态更改，。

本概述包括了这些API 的用法，并提供了有关不同MediaElement 状态间的转换的信息。

MediaElementMediaElement 的当前状态（Buffering、Closed、Error、Opening、Paused、 Playing 或 Stopped）会影响到使用媒体的用户。

例如，如果某用户正在尝试查看一个大型视频，则 MediaElement 将可能长时间保持在Buffering 状态。

在这种情况下，您可能希望用户界面 (UI) 中提供某种还不能播放媒体的提示。

当缓冲完成时，您可能希望指示现在可以播放媒体。

使用 CurrentState 和 CurrentStateChanged下面的示例演示一种方法，以显示MediaElement 的CurrentState。

它创建一个MediaElement 和若干按钮，以便体播放。

为了显示MediaElement 的当前状态，本示例注册CurrentStateChanged 事件并且使用某一事件处理程序来更新TextBlock。

XAMLx:Name="media"Source="xbox.wmv"Width="300" Height="300"Grid.Column="0"Grid.Row="0"Grid.ColumnSpan="3" />Grid.Column="0" Grid.Row="1" Content="Stop" />Grid.Column="1" Grid.Row="1" Content="Pause" />Grid.Column="2" Grid.Row="1" Content="Play" /><textblockGrid.Column="0" Grid.Row="2" Margin="10"FontSize="12">CurrentState:<textblockx:Name="mediaStateTextBlock"Grid.Column="1" Grid.Row="2" Margin="0,10,0,0"FontSize="12"></textblock</textblockVBPrivate Sub StopMedia(ByVal sender As Object, ByVal e As RoutedEventArgs)media.Stop()End SubPrivate Sub PauseMedia(ByVal sender As Object, ByVal e As RoutedEventArgs)media.Pause()End SubPrivate Sub PlayMedia(ByVal sender As Object, ByVal e As RoutedEventArgs)media.Play()End SubPrivate Sub Media_State_Changed(ByVal sender As Object, ByVal e As EventArgs)mediaStateTextBlock.T ext = media.CurrentState.ToString End SubC#private void StopMedia(object sender, RoutedEventArgs e) {media.Stop();}private void PauseMedia(object sender, RoutedEventArgs e) {media.Pause();}private void PlayMedia(object sender, RoutedEventArgs e){media.Play();}private void Media_State_Changed(object sender, EventArgse){mediaStateTextBlock.T ext = media.CurrentState.ToString();}说明：CurrentStateChanged 事件可能没有按预期工作。

Windows⾃带性能监控⼯具Perfmon使⽤介绍⼀、Perfmon简介 Perfmon(Performance Monitor)是⼀款Windows⾃带的性能监控⼯具，提供了图表化的系统性能实时监视器、性能⽇志和警报管理。

通过添加性能计数器(Performance Counter)可以实现对CPU、内存、⽹络、磁盘、进程等多类对象的上百个指标的监控。

其中，性能⽇志可定义输出格式为⼆进制⽂件、⽂本⽂件、SQLSERVER记录等，以⽅便后续使⽤第三⽅⼯具进⾏分析。

⼆、Perfmon的启⽤和监控设置　Perfmon使⽤⽅法：2.1 Windows开始中输⼊perfmon后回车，即可打开perfmon.exe2.2 点击性能监视器；2.3 在右窗格中单击右键，然后单击“添加计数器”；或点击监控图上⽅的"+"也可以打开添加计数器的窗⼝；2.4 在性能对象列表中，选择所需的性能指标计数器类别，以在Perfmon.exe中显⽰对应指标的监控图形，然后单击【添加】-->【确认】2.5 在计数器勾选区域： 选中监控图底部的某个计数器，右键【属性】，可编辑该计数器的线条颜⾊、宽度等样式2.6 通过切换点击不同的计数器类别，可实时观察到所统计的【最新值、平均值、最⼩值、最⼤值、持续时间】2.7 在监控图区域右键【属性】，可设置采样的持续时间（默认100s）、每间隔多少时间采样⼀次右键【图形另存为】，可将本地性能监控的采样图保存到本地右键【清除】，可将当前监控上的采样图清空，⽽后从左⾄右继续开始新的采样图三、性能分析⽅法1.内存分析⽅法内存分析：⽤于判断系统有⽆内存瓶颈，是否需要通过增加内存等⼿段提⾼系统性能表现内存分析的主要⽅法和步骤：（1）⾸先查看Memory:% Commitued Bytes in Use指标如果该指标数值⽐较⼤，系统可能出现了内存⽅⾯的问题，需要继续下⾯步骤进⼀步分析。