3M Display M2256PW User Guide

3M™ MicrospheresSelection GuidePerformance3Application Ideas Potential Enhancements*Product Considerations3M ™Glass Bubbles Series3M ™Glass Bubbles Floated Series*H50 strength per 3M QCM 90% survival minimum.Note: T echnical information and data shown here should beconsidered representative or typical only and should not be used for specification purposes. Refer to product data pages for additional technical information.Please recycle. Printed in USA. © 3M 2015. All rights reserved. Issued: 7/15 10627HB 98-0212-4144-7 Rev. B.3M is a trademark of 3M Company. Used under license by 3M subsidiaries and affiliates.3M CenterSt. Paul, MN 55144-1000 1-800-367-8905/microspheres3Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Unless a different warranty is specifically stated in the applicable product literature or packaging insert, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damages arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.Technical Information: Technical information, recommendations, and other statements contained in this document or provided by 3M personnel are based on tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Such information is intended for persons with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.。

3M™ Touch Display Quick Start Guide3M™ Touch Display Quick Start Guide (1)Указания за бързо стартиране на 3M™ сензорен дисплей (5)3M™ Touch Display快速启动指南 (9)Kratke upute za uporabu zaslona na dodir 3M™ (13)3M TM Dotykový displej Příručka rychlého spuštění (17)3M™ Touchscreen hurtig startguide (21)3M™ Touch Display Snelle startershandleiding (25)3M™ puuteekraani kiirjuhis (29)3M™-kosketusnäytön pika-aloitusopas (33)Guide de démarrage rapide de l’écran tactile 3M™ (37)Kurzanleitung 3M™ Touch Display (41)Οδηγόςγρήγορηςεκκίνησηςτηςοθόνηςαφήςτης 3M™ (45)A 3M™érintőkijelző Első lépések c. útmutatója (49)Guida rapida all'uso del Display Touch 3M™ (53)3M™터치디스플레이빠른시작안내서 (57)3M™skārienjutīgā displeja ātrās palaides rokasgrāmata (61)3M™jutiklinio ekrano trumpas pradžios vadovas (65)Gwida Rapida Introduttiva għal 3M™ Touch Display (69)Skrócona instrukcja montażu i obsługi ekranu dotykowego3M™ (73)Guia de Inicialização Rápida do Ecrã de Toque da 3M™ (77)Ghid de pornire rapidă a afişajului tactil 3M™ (81)Краткоеруководствопользователядлясенсорногодисплея 3M™ (85)Dotykový displej 3M™ Príručka rýchleho spustenia (89)Zaslon na dotik 3M™ – vodič za hitri začetek (93)3M™ Guía de inicio rápido de pantalla táctil (97)3M™ Snabbstartsguide för pekdisplay (101)3M™ Touch Display Quick Start GuidePlease read, understand and follow all safety information contained in this document prior to use. For more information, see the product specific 3M™ User Guide found on /TouchUserGuides. Retain these instructions for future reference.To reduce the risks associated with hazardous voltage:To reduce the risks associated with lifting large or heavy displays:Connecting the 3M™ Touch Display1. Turn off power switch on your computer. You should always turn off the computer before connecting or disconnecting a device.2. Connect (A) USB or Serial cable to the available port on your computer and plug the other end into the back of display.3. Connect either the (B) Displayport or (C) HDMI or (D) DVI or (E) VGA cable to the video connector on the display. Connect the other end to the video card in your computer.4. Connect the power cord to the (F) power connector on the display. Connect the other end of the power cord to an appropriate grounded power source.(A) (B) (C) (D) (E) (F)USBDisplayportHDMIDVIVGAPower ConnectorMounting the 3M Touch DisplayNote: Always use the mounting holes when attaching the brackets or arm mount. Do not drill additional holes in the unit.VESA Mounting OptionEach display has a VESA mounting pattern on the back to allow for arm mount capability.Note: To avoid the risk of potential damage to display electronics:• Always use the proper VESA sized mounting holes when using an arm attachment. (See table for correct VESA size.) Do not drill additional holes inthe unit to mount plates at other locations.• Do not use screws that are longer than specified in the table, they could potentially damage electronics inside the display. • If you choose to use a VESA mount or UL listed wall mount bracket, ensure adequate weight load capability. • Follow the manufacturer's instructions included with the mounting device to properly attach your display.Bracket Mounting Option (Chassis Models Only)The 3M Touch Chassis Display may come with a hardware accessory kit for mounting the unit into an enclosure. This kit includes screws and mounting brackets.Mounting holes are located on 4 sides of the display.•Always use the supplied screws.•Brackets can be attached to the edges of the chassis.Testing the 3M™ Touch DisplayNote: The 3M Touch Display has a power status light and video controls.Before testing your touch display, make sure all cables are connected properly. Be sure to tighten all cable screws. After connection, turn on the power switch located on the display.To test that the display is working properly:1.Turn on your computer.2.Make sure the video image is displayed. If it is not, check the LED to ensure that the display is not in power save mode (amber).3.Make sure the video image is centered within the screen area. Use the display controls to adjust the image, if necessary. You can adjust thehorizontal and vertical position, contrast, and brightness to better suit your video card and your personal preference.For detailed information on display functionality, operations, or controller communications, refer to the User Guide located on/TouchUserGuides.Installing the Touch SoftwareA 3M MicroTouch™ MT 7 Software Driver may be required to operate your display. See the table below to determine if this is required based on your product and operating system. Refer to the MicroTouch MT7 Software User Guide for complete instructions. These drivers and relevant technical documentation can be found on the enclosed 3M Touch Solutions CD (31197) and are also available for download from our website at/touch. After the software is installed, restart your computer to load and activate the touch sensor driver.Contact 3M Touch Systems3M Touch Systems, Inc. provides extensive support services through our website and technical support organization. Visit the 3M Touch Systems website at /touch, where you can download MT 7 software and drivers, obtain regularly updated technical documentation on 3M Touch Systems products, and learn more about our company.You can contact 3M Touch Systems, Inc. Technical Support (US only -- Eastern Standard Time) by calling the hot line, sending email or a fax.•Technical Support Hot Line: 978-659-9200•Technical Support Fax: 978-659-9400•Toll Free: 1-866-407-6666 (Option 3)•Email: *************************Disclaimer: The information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of 3M Touch Systems, Inc. 3M may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. The furnishing of this document does not give you license to these patents, trademarks, copyrights, or other intellectual property except as expressly provided in any written license agreement from 3M Touch Systems, Inc.The information provided in this document is intended as a guide only. For the latest detailed engineering specifications, please contact your 3M Touch Systems, Inc. Application Engineer. 3M Touch Systems, Inc. is committed to continually improving product designs. As a result, product specifications may be subject to change without notification."RoHS 2011/65/EU Compliant" means that the product or part does not contain any of the substances in excess of the maximum concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU, unless the substance is in an application that is exempt under EU RoHS. The MCVs are by weight in homogeneous materials. This information represents 3M's knowledge and belief, which may be based in whole or in part on information provided by third party suppliers to 3M.US Supplier's Declaration of Conformity for the following 3M Company manufactured product(s):M1500SS, C1500SS, M1700SS, M1866PW, M2167PW, C2167PW, C2234SW, M2467PW, M2767PW, C3266PW,C4267PW, C4667PW, C5567PW, C6587PWWe hereby declare that these products comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and2. This device must accept any interference received, including interference that may cause undesired operation. Responsible Party Contact information:3M Touch Systems, Inc.501 Griffin Brook Park DriveMethuen, MA, USA, 01886/touchNOTICE: Given the variety of factors that can affect the use and performance of a 3M Touch Systems, Inc. product (the “Product”), including that solid state equipment has operation characteristics different from electromechanical equipment, some of which factors are uniquel y within User’s knowledge and control, it is essential that User evaluate the 3M Touch Systems, Inc. Product and software to determine whether it is suitable for User’s particular purpose and suitable for User’s method of application. 3M Touch Systems, Inc. statements, engineering/technical information, and recommendations are provided for User’s convenience, but their accuracy or completeness is not warranted. 3M Touch Systems, Inc. products and software are not specifically designed for use in medical devices as defined by United States federal law. 3M Touch Systems, Inc. products and software should not be used in such applications without 3M Touch Systems, Inc. express written consent. User should contact its sales representative if User’s opportunity in volves a medical device application. IMPORTANT NOTICE TO PURCHASER: Specifications are subject to change without notice. These 3M Touch Systems, Inc. Products and software are warranted to meet their published specifications from the date of shipment and for the period stated in the specification. 3M Touch Systems, Inc. makes no additional warranties, express or implied, including but not limited to any implied warranties of merchantability or fitness for a particular purpose. User is responsible for determ ining whether the 3M Touch Systems, Inc. Products and software are fit for User’s particular purpose and suitable for its method of production, including intellectual property liability for User's application. If the Product, software or software media is proven not to have met 3M Touch Systems, Inc. warranty, then 3M Touch Systems, Inc. sole obligation and User’s and Purchaser’s exclusive remedy, will be, at 3M Touch Systems, Inc. option, to repair or replace that Product quantity or software media or to refund its purchase price. 3M Touch Systems, Inc. has no obligation under 3M Touch Systems, Inc. warranty for any Product, software or software media that has been modified or damaged through misuse, accident, neglect, or subsequent manufacturing operations or assemblies by anyone other than 3M Touch Systems, Inc. 3M Touch Systems, Inc. shall not be liable in any action against it in any way related to the Products or software for any loss or damages, whether non-specified direct, indirect, special, incidental or consequential (including downtime, loss of profits or goodwill) regardless of the legal theory asserted.© 3M 2016 All rights reserved.Document Title: 3M TM Touch Display Quick Start GuideDocument Number: TSD-48055, Revision F3M and MicroTouch are trademarks of 3M Company in the United States and/or other countries.All other trademarks are the property of their respective owners.Указания за бързо стартиране на 3M™ сензорендисплейПредидаизползватепродукта, прочетете, разберетеиследвайтецялатаинформациязабезопасност, съдържащасевтозидокумент, предидазапочнетедагоизползвате. Задопълнителнаинформациявижтеспецифичнотозапродуктаръководствозаексплоатацияна3M™ на/TouchUserGuides. Запазете тези инструкции за бъдещи справки.За да се намали риска от опасни напрежения:За да се намали риска, свързан с вдигане на големи или тежки дисплеи:Свързване на 3M™ сензорния дисплей1. Изключете компютъра от бутона. Компютърът трябва да е изключен винаги, когато се свързва или откача някакво устройство.2. Свържете (А) USB или серийния кабел към някой порт на Вашия компютър и другия му край към задната част на дисплея.3. Свържете един от кабелите (В) Дисплей порт, (С) HDMI, (D ) DVI или (E ) VGA към видео интерфейса на дисплея. Свържете другия край към видео картата на компютъра.4. Свържете захранването към (F ) конектора за захранване нс дисплея. Свържете другия край на захранващия кабел към подходящо заземен източник на захранване.(A) (B) (C) (D) (E) (F)USBДисплей портHDMIDVIVGAзахранванеМонтаж на 3М сензорния дисплейЗабележка: При закачването на скобите или монтажните рамена, винаги използвайте монтажните отвори. Не пробивайте допълнителни дупки вустройството.Опция за монтаж VESAВсеки дисплей има монтажни отвори за монтаж VESA на гърба, за да позволи монтирането върху рамо. Забележка: За да избегнете риска от потенциални щети по електрониката на дисплея:• Винаги използвайте подходящи монтажни отвори за монтаж VESA, когато използвате окачване върху рамо. (виж таблицата за правилнитеразмери на отворите.) Не пробивайте допълнителни дупки в устройството, за да монтирате планките на друго място.• Не използвайте винтове, по-дълги от показаното в таблицата, тъй като те биха могли да увредят електрониката във вътрешността надисплея.• Ако използвате монтаж VESA или скоба за монтиране на стена, осигурете достатъчна носимост• За да монтирате правилно Вашия дисплей, спазвайте инструкциите на производителя, приложени към монтажната шина.Опция за монтаж със скоба (само за модели с шаси)3М дисплеите с шаси могат да пристигат с допълнителен комплект за монтиране на дисплея в отвор. Комплектът включва болтове и монтажни скоби.Монтажните отвори са разположени на четирите страни на дисплея.•Винаги използвайте приложените болтове.•Скобите могат да се закрепят към ръбовете на шасито.Тестване на 3M™ сензорния дисплейЗабележка: 3М сензорният дисплей има светлинна индикация на състоянието и видео контроли,Преди да тествате сензорния дисплей се уверете, че всички кабели са свързани правилно. Затегнете всички винтове на кабелите. Следсвързването, включете дисплея от превключвателя на задната му част.За да тествате дали дисплеят работи правилно:1.Включете компютъра.2.Проверете дали се появява видео изображение. Ако това не е така, проверете светодиода, за да се уверите, че дисплеят не е в режим запестене на енергия (жълто).3.Уверете се, че видео изображението е в центъра на екрана. Ако е необходимо, настройте изображението чрез видео контролите. Можетеда настроите хоризонталното и вертикалното положение, контраста и яркостта така, че да съответстват по-добре на Вашата видео карта и на личните Ви предпочитания.За подробна информация за функциите, работата и комуникацията на дисплея, вижте Ръководството за експлоатация на страницата/TouchUserGuides.Инсталиране на сензорен софтуерЗа работата на дисплея може да е необходимо зареждането на драйвер от MicroTouch ™ MT 7. Вижте в долната таблица дали това енеобходимо в зависимост от Вашия продукт и използваната операционна система. Направете справка в ръководството за потребителя на МТ 7 Softwareза пълни инструкции. Драйверите и съответната техническа документация могат да се намерят на приложеното CD за 3M Touch solutions (31197) и могат да се свалят от нашия уебсайт на /touch. След инсталирането на софтуера, рестартирайте компютъра, за да заредите иактивирате драйвера за докосване.Контакти с 3M Touch Systems3M Touch Systems, Inc. осигурява екстензивни сервизни услуги чрез нашата уеб-страница и чрез организацията за техническа поддръжка.Посетете страницата на 3 M Touch Systems на /touch, където можете да свалите софтуера и драйверите MT 7, да получите постоянно обновявана техническа документация за продуктите на 3M Touch Systems, и да научите повече за нашата компания.Можете да влезете във връзка с техническата поддръжка на 3 M Touch Systems, Inc.( само в САЩ - EST) като позвъните на горещата линия, изпратите е-мейл или факс.•Гореща линия за техническа поддръжка: 978-659-9200•Факс за техническа поддръжка: 978-659-9400•Безплатен телефон: 1-866-407-6666 (опция 3)•E- мейл: *************************Отказ от отговорност: Информацията в този документ подлежи на промяна без предупреждение. Никаква част от този документ не може да бъде възпроизвеждана или предавана в никаква форма и по никакъв начин, електронен или механичен, за никаква цел, без изричнописмено разрешение от 3M Touch Systems, Inc. 3M може да притежава патенти или заявки за патент, търговски марки, авторски права или други права за интелектуална собственост,покриващи теми в този документ. Прилагането на този документ не Ви дава лиценз заизползването на тезипатенти, търговски марки, авторски права или други права за интелектуална собственост, освен ако това е изрично предвидено в писмено лицензионно споразумение с 3M Touch Systems, Inc.Информацията в този документ е само указателна. За подробни инженерни спецификации, моля влезте във връзка с Вашия местен представител на 3M Touch Systems, Inc. 3 M Touch Systems, Inc. се ангажира с непрекъснатотоподобряване на конструкцията на продуктите си. Поради това, спецификациите на продукта подлежат на промяна без предупреждение."RoHS 2011/65/EU съвместим" означава, че продуктът или негови части не съдържат никакви вещества надмаксималната допустима концентрация в EU RoHS директива 2011/65/EU, освен ако веществото е изключено от EU RoHS. Максималната допустима концентрация се изразява тегловно в хомогенен материал. Тази информацияпредставлява познанията и убежденията на 3M, които може да се основават изцяло или частично на информация, предоставена от трети лица, доставчици на 3M.ЗАБЕЛЕЖКА:Поради многообразието на факторите, които влияят върху използването и характеристиките напродуктите на 3 M Touch Systems, Inc.(…продукти“”), включително това, че механичното оборудване има различни операционни характеристики от електромеханичното оборудване, които фактори са под контрол изключително от потребителя, е съществено потребителят да оцени продукта и софтуера на 3 M Touch Systems, Inc., за да определи дали той е подходящ за конкретната цел на потребителя и за метода на приложение от потребителя. Определенията, инженерно-техническата документация и препоръките на 3M Touch Systems, Inc. се предоставят за удобство напотребителя, но тяхната точност и пълнота не е гарантирана. Продуктите и софтуерът на 3M Touch Systems, Inc. не са специално предназначени за използване в медицински прибори по дефиницията на федералния закон на САЩ. Продуктите и софтуерът на 3M Touch Systems, Inc. не трябва да се използват в такива предназначения без изрично писмено съгласие от 3M Touch Systems, Inc. Ако приложението на потребителя включва използване в медицински прибори, потребителят трябва да се свърже със съответния търговски представител.ВАЖНА БЕЛЕЖКА ЗА КУПУВАЧА: Спецификациите подлежат на промяна без предупреждение. Тезипродукти и софтуер на 3M Touch Systems, Inc. гарантирано покриват публикуваните спецификации към датата на доставка и за периода, отбелязан в спецификацията.3M Touch Systems, Inc. не дава допълнителни гаранции,изрични или косвени, включително, но без да се ограничава с косвени гаранции за продаваемост илипригодност за определена цел. Потребителят трябва да определи дали продуктите и софтуерът на 3M TouchSy stems, Inc. са пригодни за конкретната цел на потребителя и подходящи за неговите методи на производство,включително отговорностите по интелектуалната собственост на приложението на потребителя. Ако се докаже, че продуктът, софтуерът или носителят на софтуера не покриват гаранцията на 3M Touch Systems, Inc. единственото задължение на 3M Touch Systems, Inc. и единственото обезщетениеза потребителя или купувача ще бъде да бъде ремонтиран или заменен продуктът или софтуерният носител или да се върне продажната цена, по усмотрение на 3M Touch Systems, Inc. Гаранцията не задължава 3M Touch Systems, Inc. за продукт, софтуер или софтуеренносител, който е бил модифициран, или повреден поради неправилна употреба, злополука или небрежност или ако е правен опит за ремонтиране от каквито и да било лица, освен от 3M Touch Systems, Inc. 3M Touch Systems, Inc. няма да отговаря по никакви оплаквания, свързани с продукта или софтуера за щети и загуби, преки,косвени, специални, случайни или резултиращи (включително престои, пропуснати ползи и добра воля),независимо от отстояваната юридическа теза.© 3M 2016 Всички права запазени.Заглавие на документа:Указания за бързо стартиране на 3M ™ сензорен дисплейНомер надокумента: TSD-48055, ревизия F3M и MicroTouch са търговски марки на 3M в САЩ и/или други страни.Всички други търговски марки са собственост на съответните си притежатели.3M™ Touch Display快速启动指南使用产品前，请阅读、理解并遵守本文件中包含的全部安全信息。

Performance meets peace of mind.3M™ Novec™ Electronic Grade Coatings3M Science. Applied to Life.™3M™Novec™Electronic Grade CoatingsNo worries — inside or outside.Safe, sustainable electronic grade coatings help protect your device components from corrosion or your display surfaces from dirt,grime and fingerprintsElectronic devices have become an inescapable part of lifefor people around the world. From consumer devices like smartphones, tablets and wearables to specialized industrial technology such as automation controls, electronics and sensors are everywhere — including in many challenging environments. New industries, markets and geographies mean new demands for reliability and performance. This fuels the critical need to protect devices from environmental threats, including moisture, sulfur and pollution.Give your customers peace of mind with 3M™Novec™Electronic Grade Coatings. These ultra-thin coatings are designed to maintain optimal performance and functionality in a widerange of electronics applications. They help protect against environmental elements such as pollution and humidity that can cause corrosion and electrical failure, as well as contaminants such as oils, dirt, or grime that can affect the appearance and use of the device. Using 3M Novec coatings can help improve reliability and your customer’s user experience.What’s more, these coatings are engineered to be easy to work with because they dry quickly, can be applied using a varietyof application methods and most don’t have to be cured. Their low viscosity helps them form a thin protective layer on many materials used in electronics. That makes them a win-win solution — enhanced protection for your customers, and improved manufacturing efficiency for you. The science behind the solutions All Novec coatings are engineered for safetyand sustainability, utilizing unique proprietary3M chemistry. They are part of our longstanding commitment to continually improve the environmental, health and safety profiles ofour chemical products. All Novec coatings are formulated using 3M™Novec™Engineered Fluids, which are:• L ow global warming potential (GWP)solvents with zero ozone depletionpotential (ODP)• E xempt from the U.S. EPA definitions for Volatile Organic Compounds (VOCs)• N ot scheduled for regulatory phasedownor phase-out• L ow in toxicity with a wide marginof worker safety• Non-flammableWe have you covered.When you choose Novec coatings, you gain all the advantages of 3M’s innovative materials, chemical expertise and dedicated support. Here’s a look at some of the key benefits these high-performance coatings can help you realize:Engineered for:To give you:Protection A uniform oleophobic and hydrophobic layer that helps cover surfaces of a component for exceptional repellency of moisture, oils, dirt, grime, fingerprints and other environmental contaminantsSustainability Low environmental impact, zero ODP carrier solvents with low GWP , compared to conventional coatings formulated with hydrocarbon solventsSpeed Ability to handle coated components within seconds; many options do not need to be cured and masking components may not be requiredviscosity and surface tension make them easy to apply using a variety of methods.* They are ultra-thin and transparent so they have little to no impact on device performance and appearance.Easy-clean device surface protection Hand-held mobile devices and touchscreens let users access information with a simple swipe, but they also tend to accumulate fingerprints, oils, liquids, cosmetics and other materials that can damage them or make them unappealing to use. Choose durableNovec coatings for easy-clean device protection.• H elp keep surfaces smudge-free • H elp improve lubricity • D o not change surface appearance • E asy to apply — dries in seconds, thermal curing adds chemical and abrasion resistance • S uitable for protecting glass and glass-like surfaces Better together!Consider choosing sustainable 3M ™ Novec ™ Engineered Fluids as solvents for cleaning components prior to coating. They are also ideal carriers for coatings that need to be diluted before use. Ask your 3M representative for help determining which Novec fluid is right for your application. * Novec coatings can be applied using spray, dip or syringe methods.For spray application, 3M recommends using engineered controls or personal protection equipment (PPE) to help minimize worker exposure.Safety Data Sheet: Consult the safety data sheet before use.Regulatory: For regulatory information about this product, contact your 3M representative.Technical Information: The technical information, recommendations and other statements contained in this document are based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.Product Use: Many factors beyond 3M’s control and uniquely within user’s control can affect the use and performance of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application.Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OR TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability. The 3M ™ Novec ™ Brand Family The Novec brand is the hallmark for a variety of proprietary 3M products. Although each has its own unique formula and performance properties, all Novec products are designed in common to address the need for smart, safe and sustainable solutions in industry-specific applications. These include precision and electronics cleaning, heat transfer, fire protection, protective coatings, immersion cooling, advanced insulation media replacement solutions and several specialty chemical applications.Please recycle. Printed in USA. ©3M 2017. All rights reserved. Issued: 5/17 60-5002-0512-9 HB12118Electronics Materials Solutions Division 3M Center, Building 224-3N-11St. Paul, MN 55144-1000 USA /novec 1-800-810-85133M ™ N ovec ™ E ngineered Fluids 3M ™ N ovec ™ A erosol Cleaners 3M ™ N ovec ™ 1230 Fire Protection Fluid 3M ™ N ovec ™ E lectronic Grade Coatings 3M ™ N ovec ™ E lectronic Surfactants 3M ™ N ovec ™ D ielectric Fluids 3M and Novec are trademarks of 3M Company. Used under license by 3M subsidiaries and affiliates. 3M ™ Novec ™ Electronic Grade CoatingsEngineered for performance, safety and sustainability3M has been providing coatings to the electronics industry for decades, with our chemistries continually evolving and improving. Our scientists are constantly seeking the answers to how to do it all better, safer and more responsibly. The result — a broad range of ultra-thin 3M ™ Novec ™ Electronic Grade Coatings to choose from.With excellent repellency and corrosion protection, Novec coatings give you all the performance, without compromising safety and sustainability. Let’s get started—together3M Novec is more than a line of products – we’re people who share your passion for solving problems and improving lives.Not sure which coating is right for your application? We are here to help!Contact us to answer any questions you may have and for guidance, product data and test samples.Visit /Novec or contact your local 3M Novec representative for more information and to get started today.。

glass, mirrors, carpets, floors and walls.Bathroom mirrors, tile, bowls, urinals and fixtures.Prespray and extraction cleaning for colorfast and nylon stain-resistant carpets.Cleaning and stripping for hard floors.3M ™ Glass Cleaner ConcentrateConcentrado de limpieza para vidrios 3M ™3M ™ Speed Stripper Concentrate Concentrado rectificador rápido 3M ™3M ™ Deodorizer — Fresh Scent Concentrate Desodorizante 3M ™ — Concentrado con aroma fresco3M ™ Non-Acid Bathroom Cleaner Concentrate Concentrado de limpieza para baños no ácido 3M ™3M ™ Industrial Degreaser Concentrate Concentrado desengrasante industrial 3M ™3M ™ Disinfectant Cleaner RCT Concentrate Concentrado de limpieza desinfectante de ensayo clínico aleatorizado (RCT) 3M ™3M ™ Food Service Degreaser Concentrate Concentrado desengrasante para áreas de servicios de comidas 3M ™3M ™ Deodorizer — Mountain Spice Concentrate Desodorizante 3M ™ — Concentrado con aroma de montaña3M ™ Heavy Duty Glass Cleaner Concentrate Concentrado de limpieza para vidrios de alta resistencia 3M ™Scotchgard ™ Extraction Cleaner Concentrate Concentrado de limpieza de extracción Scotchgard ™3M ™ General Purpose Cleaner Concentrate Concentrado de limpieza de propósito general 3M ™3M ™ Non-Acid Disinfectant Bathroom Cleaner ConcentrateConcentrado de limpieza para baños desinfectante no ácido 3M ™3M ™ Floor Stripper LO ConcentrateConcentrado LO rectificador de suelos 3M ™Scotchgard ™ Pretreatment Cleaner ConcentrateConcentrado de limpieza para tratamientos previos Scotchgard ™Scotchgard ™ Bonnet Cleaner Concentrate Concentrado de limpieza de capó Scotchgard ™3M™ Sanitizer ConcentrateConcentrado desinfectante 3M ™3M ™ Neutral Quat Disinfectant Cleaner Concentrate Concentrado de limpieza desinfectante cuaternario neutro 3M ™3M ™ Neutral Cleaner LO Concentrate Concentrado LO de limpieza neutro 3M ™3M ™ Deodorizer — Country Day Scent Concentrate Desodorizante 3M ™ — Concentrado con aroma día de campo3M ™ Glass Cleaner and Protector Limpiador y protector de vidrios 3M ™3M ™ 3-in-1 Floor Cleaner Concentrate Concentrado de limpieza para suelos 3 en 1 3M ™3M ™ Peroxide Cleaner ConcentrateConcentrado de limpieza de peróxido 3M ™3M ™ HB Quat Disinfectant Cleaner Concentrate Concentrado de limpieza desinfectante cuaternario HB 3M ™3M ™ Clean & Shine Daily Floor Enhancer Limpiador y Sellador De Pisos Concentrado Para Uso Diario Clean & Shine3M ™ Tile, Grout & Bowl Cleaner ConcentrateConcentrado de limpieza para azulejos y tazas 3M ™Limpieza General: La mayoría de las superficies lavables, como ventanas, cristales, espejos, alfombras, pisos y paredes.Limpieza de Baños: Espejos, azulejos, tazas, mingitorios y accesorios para baños.Limpieza de Alfombras: Limpieza con rociado previo y extracción para alfombras indelebles y de nylon resistente a las manchas.Mantenimientos de Pisos Duros: Limpieza y rectificación para pisos duros.Limpieza del área de Servicios de Comida: Limpieza y desengrase de paredes, pisos, mesas, alfombras y asientos.Restroom CleaningCarpet CleaningHard Floor Maintenance*Product is intended for use on windows, glass, mirrors and other mirrored surfaces. †Food contact sanitizer.1*613192540142026152716†222817*233324345258131123272428253426401*34401241421417*22551213141517*1*41952202023412542344440516822232435252633343540414237816†17*201*2242633343M, Scotchgard and Twist ’n Fill are trademarks of 3M. Used under license in Canada. Green Seal and the Green Seal Certified mark are trademarks of Green Seal, Inc. The Carpet and Rug Institute’s Seal of Approval logo is a trademark of the Carpet and Rug Institute.© 3M 2020. All rights reserved. Please recycle. 70-0710-3629-034-8724-8135-23M Commercial Solutions3M Center, Building 220-12E-04St. Paul, MN 55144-1000Phone 1-800-852-9722Web /facilityThe Carpet and Rug Institute (CRI) Seal of Approval addresses cleaning effectiveness by testing and certifying only those products that meet high performance standards.Products No. 24, 44: Acute toxicity and skin/eye damage met requirements at the as-used dilution, as specified for closed dilution systems.Product No. 8, 34: Skin/eyedamage met requirements at the as-used dilution, as specified for closed dilution systems.Products meet Green Seal ™ Standard GS-37 based on effective performance, concentrated volume, minimized/recycled packaging, and protective limits on: VOCs and human & environmental toxicity. 35。

Empower portals of freedom.3M Display Materials & Systems DivisionDisplay Solutions for Notebook ComputersImprove visual quality.Wide viewing angle and increased brightness Improved sunlight readabilityEnables use of higher resolution and higher color gamut systemsMore robust.Constructed to withstand various environments and use modes Reduce thicknessand weight.Thinner brightness enhancement films Smaller battery than a similarly performing unit without 3M filmsMaximize power efficiency. Adds ‘virtual battery’ by reducing power consumptionLonger batter life for optimal user experienceCreate amazing displays.Make your notebook’s performanceas impressive as its design.Enhanced Visual Quality0.00Weight Reduction Thickness ReductionThicknessReductionPower E ciencyPower Efficiency Environmentally StableEnvironmentallyStable3M Display Enhancement FilmsTop 3M BEF3M BEF2-DT-155155 µm, durable high gain 3M BEF4-DT-145145 µm, durable high gain 3M BEF4-DT-9090 µm, durable high gain 3M BEF4-DMH-LS-9595 um, durable high gain, matte3M BEF4-DME-105 (21) v4102 um, durable high gain, matteBottom 3M BEF3M BEF2-DT-155155 µm, durable high gain 3M BEF4-DT-145145 µm, durable high gain 3M BEF4-DT-9090 µm, durable high gaintechnology 3M APF-V416.5 µm, on-glass 3M APF-V326 µm, on-glass 3M APF-T3535 µm, on-glass 3M DBEF5125 µm, backlight 3M DBEF6160 µm, backlightAnatomy of aBack Reflector3M SESR-8082 µm, diffuse 3M ESR-80v2 82 µm, specular 3M ESR-100100 um, specular 3M EDR-95v295 um, diffuse 3M LBR-160W160 um, specularImproved brightness and power efficiency.Backlight Solution +43% Brighter-30% Backlight Power On-Glass Solution+53% Brighter-35% Backlight PowerConventional3M BEF2-DT-1553M BEF2-DT-155Bottom Di user Top Di userWhite Re ectorLight Guide Plate3M BEF2-DT-1553M BEF2-DT-1553M DBEF63M ESR-100Light Guide PlateBottom Di userTop Di user3M BEF2-DT-1553M BEF2-DT-1553M APF-QWP-HCSLight Guide PlateBottom Di user3M™ Advanced Polarizer Film-Quarter Wave Plate (APF-QWP)3M™ Dual Brightness Enhancement Film (DBEF)3M™ Brightness Enhancement Film (BEF)3M™ Enhanced Diffuser Reflector (EDR)3M™ Enhanced Specular Reflector (ESR)3M™ Structured Enhanced Specular Reflector (SESR)Reduce thickness.TypicalThin & Bright288 um thickness reductionEquivalent brightness3M BEF2-DT-1553M BEF2-DT-1553M DBEF63M ESR-100Light Guide PlateBottom Di user3M BEF4-DMH-LS-953M BEF4-DT-903M APF-V43M SESR-80Light Guide PlateBottom Di user3M is a trademark of 3M company. © 3M 2018. All rights reserved. Please recycle. Printed in U.S.A. dz238343M Display Materials & Systems Division 3M Center, Building 235-1E-54 St. Paul, MN 55144-1000 U.S.A.1-800-3M HELPS /displayfilmsReflective Polarizer Films(increase in-module brightness 35% to 40% & widen viewing angles)Product Description StructureThickness (µm)Features3M APF-QWP-HCSOn-glass reflective polarizer 29 ± 3.5• Reflective polarizer for lamination to the rear absorbing polarizer with brightness boosting quarter wave plate and hardcoat 3M APF-V4 HCOn-glass reflective polarizer 19 +3/-2• Thinner reflective polarizer for lamination to the rear absorbing polarizer with hardcoat 3M APF-V4On-glass reflective polarizer 16.5 ± 2• Thinner reflective polarizer for lamination to the rear absorbing polarizer 3M APF-V3On-glass reflective polarizer 26 ± 3• Reflective polarizer for lamination to the rear absorbing polarizer with imprint resistant surface 3M APF-T35On-glass reflective polarizer35 ± 3• Reflective polarizer for lamination to the rear absorbing polarizer 3M DBEF6Backlight matte coated reflective polarizerwith anti-static property160 ± 15• Thinner high performance RP available through backlight channel • Matte coating provides defect hiding performance for low haze systems• Anti-static properties for improved handling and debris control 3M DBEF5Backlight matte coated reflective polarizerwith anti-static property125 ± 12• Thinner high performance RP available through backlight channel • Matte coating provides defect hiding performance for low haze systems• Anti-static properties for improved handling and debris controlBrightness Enhancement Films(on-axis light management)Product DescriptionStructureThickness (µm)Pitches (µm)Features3M BEF2-DT-155Durable, high brightness transparent prismfilm155 ± 1050• Durable high refractive index prisms with improved impact resistance• Provides similar brightness performance to BEF2-G2-MR23M BEF4-DT-145Durable, high brightness transparent prismfilm145 ± 1024• Durable high refractive index prisms with improve impact resistance. 24 micron pitch features on 5 mil substrate provides similar moire reduction as 3M™ BEF4-GT3M BEF4-DT-90Durable, high brightness transparent prismfilm90 ± 724• Durable high refractive index prisms with improved impact resistance. 3 mil substrate designed to enable thin backlights for use in small size notebooks and 2-in-1s.3M BEF4-DMH-LS-95Durable, high brightness matte prism film 95 ±- 724• Durable high refractive index prisms in combination with a higher haze designed matte for superior defect hiding.• Designed to enable removal of a top diffuser for thinner design.3M BEF4-DME-105 (21) v4Durable matte prism film, reduces sparkle,graininess and mura102 ±- 821• Durable high refractive index prisms designed with matte for mura/moire reductionReflector Films(increase in-module brightness 5% to 15%)Product DescriptionStructure Thickness (µm)Features3M SESR-80Structured Enhanced Specular mid-sizedMOF reflector82 ± 7• Improves the light recycling efficiency of a backlight across the visible spectrum• More robust surface structure when used with Polycarbonate light guide3M ESR-80v2Specular mid-sized MOF reflector 82 ± 7• Improves the light recycling efficiency of a backlight across the visible spectrum• Surface designed for reduced wet out3M ESR-100Specular mid-sized MOF reflector 100 ± 43M EDR-95v2Diffuse mid-sized MOF reflector95 ± 8• Improves the light recycling efficiency of a backlight across the visible spectrum• Diffuse coating for reduced wet-out and warp hiding3M LBR-160WMOF specular reflector laminated to whitePET3M LBR160 ± 16• Improves the light recycling efficiency of a backlight across the visible spectrum• Laminated structure provides extra stability in no tray or partial tray systems。

MB16AWP无线便携式显示器用户指南第一版2022 年 1 月版权所有 © 2022 ASUSTeK COMPUTER INC. 保留所有权利。

未经 ASUSTeK COMPUTER INC. ("ASUS") 明确书面同意，不得以任何形式或通过任何方式复制、传播、转录本手册的任何部分，包括其中介绍的产品和软件，也不得存储到检索系统中或翻译成任何语言，购买者出于备份目的而保留的文档除外。

在下列情况下，不能享受产品保修或维修服务：(1) 产品被修理、修改或改动，除非此类修理、修改或改动得到 ASUS 的书面授权；(2) 产品序列号损毁或缺失。

ASUS“按原样”提供本手册，不提供任何明示或隐含的担保，包括但不限于对于适销性或针对特定目的的适用性的隐含担保或条件。

无论在任何情况下，ASUS 及其董事成员、高级职员、员工或代理不对由于本手册或产品中存在任何缺陷或错误而导致的任何间接、特殊、偶然或必然损失（包括收益损失、业务损失、不能使用或数据丢失、业务中断等）承担任何责任，即使 ASUS 已被告知此类损失的可能性。

本手册中包含的规格和信息仅供一般性参考，可能会随时变更而无需另行通知，因此不应构成 ASUS 的承诺。

ASUS 对本手册（包括其中介绍的产品和软件）中可能存在的任何错误不承担任何责任。

本手册中出现的产品名称和公司名称可能分别是或不是相应公司的注册商标或版权，仅用于标示或解释目的，无意侵犯其所有者的权益。

ii目录 (iii)声明 (iv)安全信息 (xi)保养和清洁 (xii)中国产品回收服务 (xiii)北美可充电电池回收服务 (xiii)产品欧盟能源标识信息 (xiii)第 1 章：产品介绍1.1 欢迎使用！ .....................................................................................1-11.2 物品清单.........................................................................................1-11.3 显示器简介 .....................................................................................1-21.3.1 前部概览/侧面概览 ........................................................1-2第 2 章：设置2.1 显示器竖立位置 ..............................................................................2-12.2 调整显示器 .....................................................................................2-12.3 连接线缆.........................................................................................2-22.4 打开显示器电源 ..............................................................................2-22.5 执行无线投影..................................................................................2-32.6 将显示器连接到 Internet ................................................................2-42.7 更新无线投影固件 ..........................................................................2-52.8 通知 ................................................................................................2-6第 3 章：一般说明3.1 OSD（屏幕显示）菜单...................................................................3-13.1.1 如何重新配置 ..................................................................3-13.1.2 OSD功能介绍.................................................................3-23.2 规格摘要.........................................................................................3-93.3 外形尺寸.......................................................................................3-113.4 故障排除（常见问题） .................................................................3-123.5 支持的运行模式 ............................................................................3-13iii联邦通信委员会声明本设备符合 FCC 规则第 15 部分的要求。

Key Application:Finishing/Surface Prep3M ™ Flap Discs Flap Discs3M ™ Cubitron ™ II Please recycle. Printed in USA. © 3M 2018. All rights reserved. Issued: 11/18 14420HB 61-5002-8426-2 Rev. BAbrasive Systems Division3M Center, Building 223-6S-03St. Paul, MN 55144-10001-866-279-1235/abrasives3M, Cubitron and Scotch-Brite are trademarks of 3M Company. Used under license by 3M subsidiaries and affiliates.Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M’s control anduniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Unless an additional warranty is specifically stated on the applicable 3M product packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHERWARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.Scotch-Brite ™ Clean & Lead with:3M ™ Flap Discs 3M ™ Cubitron ™ II 3M Silver3M ™ Flap Discs3M™ Cubitron™ II 3M™ Cubitron™ II3M™ Cubitron™ II 3M™ Cubitron™ II3M™ Flap DiscsMeet thePREMIUM SERIESof right angle abrasives for unparalleled。

驱动程序安装程序安装SyncMaster 225BW标记若不按照这个符号所指出的方向，就可能造成对人体的伤害或者对设备的破坏。

禁止的任何时候阅读并理解都很重要不要拆开从插座上拔下插头不要碰接地以避免电击电源要在相当长时间内不使用时，把你的 PC 置于DPMS。

如果使用屏幕保护器，则把它置于激活屏幕模式。

此处提供的图片仅供参考，不适用于所有的情况（或国家）。

不要使用损坏了的或松动了的插头。

z这会引起电击或起火不要去拉电线来试图拔出插头，也不要用湿手去触摸插头。

z这会引起电击或起火。

只使用适当接了地的插头和插座。

z接地不好可能造成电击或设备损伤。

将电源插头插紧以防松脱。

z连接不好可能导致起火。

不要过度地弯曲插头和电线，也不要在它们上面放置重物，这样可能造成损伤。

z不照这样做可能造成电击或起火。

在一个插座上不要连接太多的插销板或插头。

z这可能引发火灾。

请勿在使用显示器时断开电源线连接。

z断开电源线连接可能会导致浪涌，并有可能损坏显示器。

请勿在连接器或插头积尘的情况下使用电源线。

z如果电源线的连接器或插头积尘，请用干布将其擦拭干净。

z使用其插头或连接器积尘的电源线可能导致触电或起火。

安装如果要将产品安装到多尘、高温或低温、湿度过高、存在化学物质以及 24 小时连续使用本产品（如机场和车站等）的环境中，请一定与经授权的服务中心联系。

否则，安装不当会对显示器造成严重损坏。

把你的显示器放在一个湿度低而且灰尘尽量少的地方。

z可能在显示器的内部产生电击或起火。

在搬动显示器时小心不要摔下来。

z这会对产品造成损伤或者会伤着人。

将显示器基座安装到陈列柜或搁板时，避免其基座末端从陈列柜或隔板凸出。

z本产品坠落可能会导致产品损坏或人身伤害。

不要将本产品放置在不稳或窄小的表面上。

z请将本产品放置在平整、稳固的表面上，以防坠落伤人（特别是小孩）。

不要将本产品放在地板上。

z可能有人（特别是小孩）会被绊倒。

不要在本产品附近放置蜡烛、杀虫剂或香烟等任何易燃物品。

3M触控显示器快速入门指南感谢您购买3M触控显示器！以下是关于如何快速入门使用的指南。

请注意，本指南仅适用于3M触控显示器的快速使用，更详细的操作说明和功能介绍请参考产品附带的用户手册。

步骤1：安装显示器首先，将显示器放置在一个适合的位置，并确保插座位于附近以供电源连接。

然后，将显示器与计算机或其他视频输入设备连接。

使用提供的视频线缆将显示器的视频输入端口与计算机的视频输出端口（通常是HDMI或VGA端口）连接起来。

确保连接牢固。

步骤2：连接电源将显示器的电源线插头插入显示器的电源输入端口，然后将电源线插头插入电源插座。

确保电源线连接牢固。

随后，您可以通过按下显示器的电源按钮来打开显示器。

步骤3：校准触控当显示器启动后，您需要对触控进行校准，以确保准确的触摸操作。

在屏幕上出现校准提示后，请按照屏幕上的指示进行操作。

通常，您需要依次点击显示的几个目标点，以对触控进行校准。

步骤4：使用触控一旦完成了触控校准，您就可以开始使用触控功能了。

您可以使用手指或适配的触控笔对显示屏进行触摸操作。

例如，您可以单击屏幕上的图标或链接进行选择，双指捏合或分开来缩放屏幕内容，或者在3M触控显示器的特定应用程序中使用多点触控手势来进行更复杂的操作。

步骤5：调整显示设置根据您的偏好和需求，您可以调整显示设置来改变显示器的外观和性能。

通过显示器的菜单按钮（通常位于显示器下方），您可以访问不同的显示设置选项。

例如，您可以调整亮度、对比度、色彩和清晰度等设置。

步骤6：关闭显示器当您不再使用3M触控显示器时，您可以通过按下显示器的电源按钮来关闭显示器。

在关闭显示器之前，请确保将所有的工作保存。

请注意，以上步骤仅适用于3M触控显示器的基本操作。

具体的操作步骤和功能可能会因不同型号的触控显示器而有所不同。

因此，在使用3M触控显示器之前，请仔细阅读附带的用户手册以获取更详细的信息。

祝您使用愉快！。

Quick ReferenceGuideGH68-50894APrinted in KoreaAbout your phoneUSB/Audio portCamerasFlash+-VolumeImages shown are of the Galaxy Note10+ and are for reference only.Set up your phoneYour SIM card may be pre-installed.Note: Use only Samsung-approvedcharging devices and accessories.Samsung accessories are designedfor your device to maximize batterylife. Using other accessories mayvoid your warranty and may causedamage.Before turning on your phone,charge it fully.Charge your deviceGet help transferring contacts,photos and other content fromyour old phone at/smartswitchBackup and restoreSIM/microSD™ trayUse the tool to open the SIM/microSDcard tray.Place the SIM card and if applicable theoptional microSD card into the tray withthe gold contacts facing down.CameraS PenSamsung CareSamsung Premium CarePick the time and place and a teammember will meet you to set up,troubleshoot, repair, or replace yourproduct. Enroll at /us/support/premium-careLearn more• Use Tips and help to access the usermanual on how to use your phone. Toopen, from Settings tap Tips andhelp .Get to know your product:• Access solutions, videos, tips, andmore at /us/support• Find support that’s convenient on yourdevice with the Samsung Membersapp. Download and install it fromGoogle Play™ store.Contact us:• Ask questions and share solutionswith other Samsung customers at• Get support at /us/support/contact or call us at1.800.SAMSUNG• Find a service location near you at/us/support/service/locationsSide key(Power/Bixby)• Power on:Long press• Short press:Lock screen• Long press:Bixby Voice• Double press:Launch camera• Power off:Long press withVolume down©2019 Samsung Electronics America, Inc. Samsung and Galaxy Note are both t rademarks of Samsung Electronics Co., Ltd. Other company and product names mentioned herein may be trademarks of their respective owners. Screen images simulated. Appearance of phone may vary.1Wireless v oice, d ata a nd m essaging s ervices c ompatible with most major U.S. GSM and CDMA networks. Visit for more information on your device. Support for certain features and services such as VoWiFi and hotspot, vary by wireless service provider. See provider for compatibility details.Press and hold the S Pen button to open an app remotely.A single press, double press, or agesture can capture a photo, navigate, scroll and more.To enable S Pen Air actions, remove the S Pen and tap Settings > Air actions .S Pen buttonPush the S Pen inward and, then pull it out.When you remove the S Pen,Air command launches.Unleash the S PenGet creative with the S PenThere's no limit to the S PenWrite and draw directly into emails or the calendar, as well as Word, ExcelPowerPoint ®, and PDF documents.Air CommandAir Command gives you access to signature S Pen features.Create note : Create customized notes.View all notes : View all notes created.Smart select : Outline and crop anything on the screen and freely edit or share.Screen write : Capture a screen image and write or draw on it.Live message : Create live messages and GIFs.Translate: Hover the S Pen over a word to view its definition and pronunciation.PENUP : Use the S Pen to draw, color, edit, and share live drawings .Add shortcuts : Select an app or function to add to the Air Command menu.View photos Capture Take photoCamera modesGallerySwipe left or right to select a mode Toggle cameraSwitch between the back and front camerasStandard (leaf), Wide (tree), and Ultra wide (forest)Scene optimizerGet more of the scene, by tapping the leaf, tree or forest iconRecognize subjects in photos and automatically enhance the quality。

WAVES UM225/UM226 User GuideTABLE OF CONTENTSChapter 1 – Introduction (3)1.1 Welcome (3)1.2 Product Overview (3)1.3 Concepts and Terminology (3)1.4 Components (4)1.5 WaveSystem Toolbar (4)Chapter 2 – Quickstart Guide (5)Chapter 3 – Interface and Controls (6)3.1 Interface (6)3.2 Controls (7)Front Profile Mode (7)LF Profile L/R to C Balance (7)HF Profile L/R to C Balance (8)Punch L/R to C Balance (8)L/R Width (8)UpMix Amount (9)Rear LPF (9)Rear Ambience (10)Rear Delay (10)LFE LPF 40Hz to 120Hz (10)LFE LoAir (11)Output Trims (11)Master Output (11)Left/Center/Right/Ls/Rs/LFE Speaker Icons (12)Input Meters (12)Left/ Center/Right /Ls /Rs/LFE Output Meters (13)Surround 360˚ Graph (13)Chapter 1 – Introduction1.1 WelcomeThank you for choosing Waves! In order to get the most out of your new Waves plugin, please take a moment to read this user guide.To install software and manage your licenses, you need to have a free Waves account. Sign up at . With a Waves account you can keep track of your products, renew your Waves Update Plan, participate in bonus programs, and keep up to date with important information.We suggest that you become familiar with the Waves Support pages: / support. There are technical articles about installation, troubleshooting, specifications, and more. Plus, you’ll find company contact information and Waves Support news.1.2 Product OverviewThe UM225 and UM226 are easy-to-use audio processors which convert stereo program material to 5.0 and 5.1 surround formats.1.3 Concepts and TerminologyStereo – Stereophonic sound consists of 2 channels of audio played through 2 speakers. Stereo has been the most common audio production standard since the late 1960s, and a vast amount of audio is archived as stereo.Surround – Surround sound consists of 5 or more channels of audio played through multi- speaker systems. In today’s Home Theatre and HDTV environments, 5.1 Surround systems (see below) have become most common. DVD and other media audio content is generally produced in Surround sound.Stereo-to-Surround is the process of taking stereophonic audio and converting (or "upmixing") it to multi-channel audio for reproduction on surround systems.Surround-to-Stereo is the process of playing back surround content through a stereo speaker system. This is usually done using predefined matrices that collapse or "downmix" the multi-channel content for reproduction on stereo systems.5.0 and 5.1 Surround are the most common surround sound configurations.o 5.0 — Consists of 3 front speakers (Left, Center, and Right) and 2 rear or “surround” speakers (Left surround and Right surround).o 5.1 — Consists of 3 front speakers (Left, Center, and Right), 2 rear speakers (Left surround and Right surround), plus a 6th channel (usually called LFE or LowFrequency Enhancement/Effect), for reproduction through a sub woofer to create rumble and tremor.Channel Order Standards – The channels used in surround can be displayed in several arrays. of the following are the most common surround standards:5.0 Film L, C, R, Ls, Rs5.1 Film L, C, R, Ls, Rs, LFE5.0 SMPTE/AES/ITU L, R, C, Ls, Rs5.1 SMPTE/AES/ITU L, R, C, LFE, Ls, Rs5.0 DTS L, R, Ls, Rs, C5.1 DTS L, R, Ls, Rs, C, LFEThe UM225 and UM226 display their meters according to the Film standard.1.4 ComponentsWaveShell technology enables us to split Waves processors into smaller plug-ins, which we call components. Having a choice of components for a particular processor gives you the flexibility to choose the configuration best suited to your material.The Waves UM Stereo-to-Surround Processors includes two components: •UM225 – 5.0 component•UM226 – 5.1 component1.5 WaveSystem ToolbarUse the bar at the top of the plugin to save and load presets, compare settings, undo and redo steps, and resize the plugin. To learn more, click the icon at the upper-right corner of the window and open the WaveSystem Guide.Chapter 2 – Quickstart GuidePro Tools1.Place your stereo file on a stereo track.2.From the Insert menu, choose UM225 or UM226.3.After the channel becomes surround, assign it to the surround output or bus asrequired.Logic Pro1.Place your stereo file on a stereo track.2.Assign its output to the surround output or bus as required.3.From the Insert menu, choose UM226.*Please note that Logic must be set to Universal Track Mode - OnDigital Performer1.Place your stereo file on a stereo track.2.Assign its output to the surround output or bus as required.3.From the Insert menu, choose UM226.Cubase/Nuendo1.Place your stereo file on a 5.0 or 5.1 Track.2.From the Insert menu choose UM225 or UM226.3.In the track’s Insert Routing window, disconnect the Center, Ls, Rs and LFE inputchannels for the UM225 or UM226.•Start by setting a Mode that describes your application or input content.•Use the LF and HF controls to determine the L/R and Center balance for Low and High frequency content.•Use the Punch control to find the point which best spreads the program transients between L/R and Center.•Use the L/R and Center Output trims to adjust the front levels.•Set the Rear stage Delay, and adjust Ambience and LPF to fit the program material.•Set the LFE LPF cutoff and try turning on LoAir, which works great for film sound effects.•Use the Ls/Rs and LFE Output trims to adjust Rear and LFE levels.•Slide the UpMix fader back to 2.0 and then back to 5.1 to find the sweet spot balance between the original stereo and the expanded surround.•When using the UM225 or UM226 to create a surround master, it is advised to place L360˚ Surround Limiter on the UM225/226 output to control dynamicoutput. (L360˚ is a part of the Waves 360˚ Surround Tools bundle.)Chapter 3 – Interface and Controls 3.1 Interface*LFE Controls: UM226 Only3.2 ControlsFront Profile ModeMode sets the Front Profile Mode, determining which stereo content will remain in theL/R channels and which will feed the Center and Ls-Rs channels.Range1. Surround 4 All – A general mode that creates a mild surround effect from anystereo content2. Film 1 – For program material with a wide dynamic range and rich with soundeffects like action, thriller, sci-fi, fantasy, and adventure films.3. Film 2 – For program material with a mild dynamic range like dialog-drivencomedy, drama, and romance films.4. Center Dialog – Moves all center-panned dialog to the Center channel,recommended for news, sports, talk shows, game shows, and documentaries.5. Steady Center – Recreates center phantom image in the Center channel for awide range of program material6. Stereo Preserve –Spreads the stereo content across the surround channelswhile retaining the original stereo image. Recommended for all genres of music.7. Music Spread – Creates a wide surround image from the original stereo image.Recommended for all genres of music.8. Music Loops – Creates a wide Front image with Center punch. Recommendedfor music loops and samples, as well as pop, dance and instrumental music.LF Profile L/R to C BalanceLF Profile L/R to C Balance determines how low frequency content is balanced between the L/R and Center channels. (Processing differs according to Mode selection.)Range0 to 100 (0 = max L/R, 100 = max Center)HF Profile L/R to C BalanceHF Profile L/R to C Balance determines how high frequency content is balanced between the L-R and Center channels. (Processing differs according to Mode selection.) Range0 to 100 (0 = max L/R, 100 = max Center)Punch L/R to C BalancePunch determines how transient material is balanced between the L-R and Center channels. (Processing differs according to Mode selection.)Range100 to 0 (100 = max L/R, 0 = max Center)L/R WidthL/R Width widens the Front L/R spread across the surround image.Range1.0 to2.0 (1.0 = Norm, 2.0=Wide)UpMix AmountUpMix Amount acts as a global wet/dry control for the UM225/UM226 process, providing a continuous fade from 5.0/5.1 surround back to stereo. Using this control, you can blend the original stereo with the surround.Range0 to 100 (0 = 2.0 Stereo, 100 = 5.0/5.1Surround)Rear LPFRear LPF controls the cutoff frequency of the 2nd order low pass filter applied to the Ls-Rs channels.Range1kHz to 20kHzRear AmbienceRear Ambience determines the way Ls-Rs content is diffused, from a small dry space to a large diffused space.Range0 to 100Rear DelayThe Rear Delay controls the delay time between the Front and the Rear stages. Shorter delay times emulate smaller surround stages; longer delay times emulate larger surround stages.Range3ms to 75msLFE LPFThe LFE LPF controls the cutoff frequency of the 4th order low pass filter applied to the LFE channel.Range40Hz to 120HzLFE LoAirThe LFE LoAir effect dynamically lowers LFE content by one octave, adding a deep “Airy” feeling to low frequency content and enriching low rumble effects.RangeOn/OffOutput TrimsOutput Trims provide up to 12dB boost or cut per surround stage: L/R, Center, Ls/Rs, and LFE.Range+12dB to -12dBMaster OutputThe Master Output Trim controls provides up to 24dB cut.Range0dB to -24dBLeft/Center/Right/Ls/Rs/LFE Speaker IconsThe Speaker icons around the surround graph are used to turn each of the output channels On or Off.RangeOn or OffInput MetersThe Input Meters display the Left and Right stereo input levels.Range0dBFS to -60dBFSLeft/ Center/Right /Ls /Rs/LFE Output MetersThe Output Meters display the Surround Left, Right, Center, Ls, Rs and LFE channel output levels.Range0dBFS to -60dBFSSurround 360˚ GraphThe Surround 360˚ Graph displays the energy spread across the surround listening field. -The transparency of the Center, Ls, and Rs yellow beams represents the amount by which they are added into the surround field, as defined by the UpMix fader.-The position of the Front Left and Right yellow beams indicates their L/R Width.。

Product & Instruction Bulletin GX Release EProduct Description•Solvent-based, pigmented inks•Available colors include Magenta, Yellow, Black, Cyan, Light Cyan, Light Magenta, Gray, and Light GrayProduct Features•Designed for printing on inkjet-compatible 3M films and media for making warranted multicolor graphics •Weather-resistant•Excellent color retention and print qualityDisclaimerWith the exception of 3M branded products, 3M does not represent that any printer or printer accessory recommended in 3M literature will meet customer requirements, any federal, state, or local regulations or any applicable safety standards. Such determination is the responsibility of the printer owner.Product LineInkH-Series container size: 1.5L bag W-Series container size: 0.5L bagCleaning SolventUse compatible cleaning solvents as recommended in the printer’s user manualRecommended Compatible Products3M Compatible Products for 3M™ MCS™ Warranty•Many 2-mil and 4-mil graphic films, reflective films, flexible substrates and graphic protection methods are warranted for finished graphics using this ink.•For the most current listing of 3M compatible products, go to the Warranty Matrices at /warranties •See the 3M Graphics Warranty Bulletin for information on reduced warranties for different exposures.3M Intermediate Graphic MaterialsThis ink may be used with 3M’s Intermediate Product line for low cost graphics that do not need a graphics warranty. Refer to the Inkjet Materials and Solid Color Films Brochure at to see the 3M Intermediate Product Portfolio .Other Graphic MaterialsThis ink series also may perform satisfactorily on many other 3M and non-3M graphics materials, but would not warranted by 3M.Always run a test print to be certain that the finished graphic quality meets your needs. Also check adhesion and scratch resistance of any graphic protection used. Contact the printer manufacturer and material manufacturer for guidance.OKI Data Infotech ColorPainter™ H-74s and H-104s, H2-74s and H2-104s, W-54s and W-64s PrintersQuick Links3M Graphics Warranties Technical Information SelectorSafety Data Sheets (SDS)3M Color ProfilesVideosSome of these links lead to web-based resources that are not product-specific.Certificate of 3M™ MCS™ WarrantyGraphic manufacturers who produce digitally printed graphics made with all 3M Graphics Products, including 3M Ink purchased through a qualified 3M Distributor or 3M Printing Partner, may register to be recognized with a Certificate of 3M™ MCS™ Warranty. Only graphic manufacturers having a current Certificate of 3M™ MCS™ Warranty are eligible to extend this warranty to their customers.NOTE: For non-digitally printed Finished Graphics, check your eligibility for the 3M™ MCS™ Warranty by viewing the 3M Graphics Warranty Period Selector at /warranties.Warranty InformationWarranty Coverage OverviewThe warranty coverage for eligible graphics is based on the user both reading and following all applicable and current 3M Graphics Product and Instruction Bulletins. The warranty period for eligible graphics is as stated in the 3M Graphics Warranties Matrices at the time that the film was purchased. Information found at /warranties includes:•3M Graphics Warranties Bulletin-This bulletin contains information on limitations and exceptions, and warranty period reductions for 3M Graphics Warranties. The warranty period may be reduced and stipulations may apply for certain constructions and applications, and graphic exposures as covered in this Bulletin.•3M Graphics Warranties Selector-Use this selector to search for your vertical warranty period by product number, ink type, and ink/printer platform.•U.S. Desert Southwest Region Map-Use this map of hot, arid desert areas to determine if you are subject to reduced warranted durabilities.The warranties set forth in this Bulletin are made in lieu of all other express or implied warranties, including any implied warranty of merchantability, fitness for a particular purpose, or arising out of a course of dealing, custom, or usage of trade.3M Basic Product Warranty3M Graphics Products are warranted to be free of defects in materials and manufacture at the time of shipment and to meet the specifications stated in its applicable 3M Graphics Product Bulletin and as further set forth in the 3M Graphics Warranties Bulletin.Limited RemedyThe limited remedy applicable to each warranty is addressed in the 3M Graphics Warranties Bulletin found at /warranties.Limitation of LiabilityExcept to the extent prohibited by law, 3M SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO PURCHASER OR USER FOR ANY DIRECT (EXCEPT FOR THE LIMITED REMEDY PROVIDED HEREIN), INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LABOR, NON-3M MATERIAL CHARGES, LOSS OF PROFITS, REVENUE, BUSINESS, OPPORTUNITY, OR GOODWILL) RESULTING FROM OR IN ANY WAY RELATED TO 3M'S GRAPHICS PRODUCTS, SERVICES, OR THIS BULLETIN. This limitation of liability applies regardless of the legal or equitable theory under which such losses or damages are sought.Warranty Period MatricesSee the 3M Graphics Warranties Matrices at /warranties, for vertical warranty period information specific to your film.Additional LimitationsSee the 3M Graphics Warranties Bulletin at /warranties, for terms, additional limitations of your warranty, if any, information on reduced warranties for different exposures, and limitations of liability.2Product & Instruction Bulletin GX Release EProduct & Instruction Bulletin GX Release E3Support Information•3M products: Contact 3M Commercial Solutions Technical Support at 1-800-328-3908.•Printer hardware and software support: Contact OKI Data Infotech Corporation at 1-760-781-5200 ext. 107.Health and Safetysafety and environmental information. To obtain SDS sheets for 3M products go to /SDS , or by mail or in case of an emergency, call 1-800-364-3577 or 1-651-737-6501.When using any equipment, always follow the manufacturers’ instructions for safe operation. To obtain SDS sheets for GX 3M ink series, contact OKI Data Infotech Corporation.VentilationProvide local and/or general exhaust ventilation in the print production areas to prevent a build up of ink vapors and to maintain levels below the limit for worker exposure. An experienced industrial ventilation engineer and/or a certified industrial hygienist can help evaluate your ventilation requirements and design based on your onsite process conditions.Please refer to the printer manufacturer’s literature for additional details and requirements.Air Quality RegulationsState Volatile Organic Compound (VOC) regulations may prohibit the use of certain chemicals with VOC’s in graphic arts coatings and printing operations. For example, the California South Coast Air Quality Management District prohibits use of certain solvent-based solutions without a permit and other California AQMD’s prohibit use of certain solutions without a permit or regulatory exemption. Check with your State environmental authorities to determine whether use of this solution may be restricted or prohibited.More on Environmental Health and SafetyAdditional environmental, health, and safety information is available on our website at /sustainability .Selecting, Preparing and Using 3M Graphic Materials•Use the right film for the job. Each film has specific intended uses, processing conditions and durability. Always refer to the 3M Product Bulletins for each product used and to the recommended 3M Instruction Bulletins referenced in those 3M Product Bulletins for complete details. 3M Product and Instruction Bulletins can be found at /TechInfo .•Condition the film, ink and graphic protection for 24 hours in the same environment as the printer before using.Ink and Film Processing RecommendationsRefer to the printer manufacturer’s instructions for setup and adjustment to achieve good image quality and to ensure proper ink and film processing.About Solvent Ink PrintingEffect on Printed ImagesNormally, very small amounts of retained solvent will not affect the finished graphic characteristics or application performance. Excessive solvent must be removed through proper drying prior to applying graphic protection (overlaminate or clear). If it is not, the graphic protection will trap excessive retained solvents. This softens the film and allows the solvent to migrate into the adhesive. Softened film is more likely to stretch, curl, bubble, lift off the liner, pucker, or shrink when handling and during graphic application. In addition, the solvent in the adhesive will contribute to more aggressive adhesion. The result is poor application characteristics.Completely and Properly Dry Printed Film•Use the highest printer dryer setting that does not distort or damage the film.•Slower printing speed allows the film to be in the dryer longer for more effective drying.•Additional drying options:-An auxiliary dryer may be used to complete the drying.-You can air dry on racks, although it is less effective than drying with heat on the printer. Typical air drying at 270% total ink coverage is12 hours; higher total ink coverage may need up to 24 hours.-Reducing total ink coverage reduces retained solvents and reduces drying time.•Troubleshooting-Change the temperature or drying times only if you observe problems.-Too much heat in the drying process may result in any of the following. Reduce the heat to correct these problems.•Film problems, including blisters and film shrinkage.•Transport problems in the printer.•Wrinkling when the printed film is overlaminated or premasked.-The drying time varies for each film and the total ink coverage of its image.•To check dryness, use the Dryness Test.Graphic Performance Problems Due to Insufficient Drying•It may be difficult to apply an overlaminate.• A graphic without graphic protection may block or emboss when it is rolled.•For Controltac™ graphic films, the slideability and positionability features will be significantly reduced during application if the film is not sufficiently dried.4Product & Instruction Bulletin GX Release EDryness Test for Most Solvent Ink Printed GraphicsDrying times vary with the equipment being used, oven temperature, humidity conditions, etc. Insufficient drying can result in blocking or severe surface impressions. Therefore, it is important to check for sufficient dryness as soon as you start printing. We recommend using the following procedures to determine if adequate drying has occurred.e this test to check the approximate dryness.a.Fold the area of the film with the highest ink laydown face-to-face.b.Place folded film close to your ear and separate it.•If the film is adequately dried, there is either a slight or no discernible sound when the surfaces separate.•If the film is not sufficiently dry, a crackling sounds is heard. The louder the sound, the greater the amount of additional drying needed.2.Even when the graphic feels or appears dry, some solvent will remain. Use this test to determine if sufficient drying has taken place. If itdoes not pass this test, more drying is required.a.Place several printed pieces of film (each folded in the area of the highest ink laydown) face-to-face under a weight of 2 pound per squareinch (135 g/sq.cm).b.After 10 minutes, remove the sheets and check for blocking or surface impressions. If blocking or severe surface impressions are noted,increase the amount of drying.Printer SettingsRefer to the printer manufacturer’s technical literature for additional details.results.Managing the Amount of Ink on FilmProperly managing the total amount of ink laid down in any area on the graphic results in better image quality, less ink usage and greater throughput. It also helps ensure good film performance.Total Ink CoverageTotal Ink Coverage: 270%Total ink coverage is the total percentage of all ink (CMYK) used in the graphic. For example, CMYK values of 60%, 60%, 60% and 90% produces a total ink coverage of 270%. For inks, a maximum of 270% is recommended unless otherwise noted in the base film’s Product Bulletin.area, maximum CMYK, maximum ink amount, total ink limit, total printing dot.You can achieve very good density using lower total ink coverage with little or no loss of quality. The rest of this section discusses options for managing the total ink coverage.Controlling Total Ink CoverageControlling total ink coverage can be managed by the color profile of the original artwork and during the printing process.Product & Instruction Bulletin GX Release E5Getting a Color ProfileA color profile typically contains the ink limits for a specific ink set, printer and media. You can use an existing color profile that is known to produce good color output with the required amount of ink limiting. Profiles may be available from the printer manufacturer, RIP software or material supplier. Visit 3M Color Profiles at .Some RIP software has ink limit settings that may be adjusted without changing the color profile setup. Check the literature for the RIP software being used.Setting Total Ink Coverage in the Original ArtworkThe best time to limit the total ink used is when the original artwork is created. Have the designer observe two rules while creating the artwork to greatly simplify printing.1.Do not exceed 270% total ink coverage.2.The graphic designer should specify the proper ICC color profile for the film, ink and printer when submitting the artwork for printing.Operation and Maintenance ProceduresFollow all operation and maintenance procedures recommended in the printer’s user manual.Printer cleanliness is very important in the production of high quality, full color graphics. Refer to the printer manufacturer’s recommendations for compatible cleaning solutions for this ink and your printer.Graphic InstallationPlease refer to the 3M Product and Instruction Bulletins at /TechInfo for the film and graphic protection you are using for detailed usage and graphic installation procedures.Graphic InstallerThe graphic installer needs to be aware of any special handling or application techniques for the construction. Any combination of high total ink coverages, hot ambient application temperatures and irregular application surfaces may make the application more difficult.Some application requirements may be different due to the type of film processing. See the applicable 3M Product Bulletin for application details on each product used, as well as the recommended 3M Instruction Bulletins.Waste DisposalRefer to the product SDS and the printer User’s Manual for details. Since regulations vary, consult applicable regulations or authorities before disposal.Shelf Life, Storage and ShippingRefer to the ink container label or contact OKI Data Infotech Corporation. for details.Shelf LifeUse by the expiration date shown on the product packaging.Shipping Finished GraphicsRefer to the base media’s Product Bulletin.Shipping InkOpened ink boxes and bags may no longer provide adequate protection against leaks and spills. Exercise caution when shipping opened boxes or bags to ensure prevention of spills or leaks. In the United States, refer to the SDS for further information.6Product & Instruction Bulletin GX Release E3M Commercial S olution s3M CenterBuilding 220­12E-04St. Paul, MN 55144­10001­800­328-3908Fax 3M CanadaPO Box 5757London, ON N6A 4T11-800-265-1840Fax 519-452-62453M México S .A. de C.V.Av. Santa Fe No. 55Col. Santa Fe, Del. Alvaro Obregón México D.F. 01210General 5255-5270-0400Fax 5255-5270-22773M Puerto Rico, Inc.350 Chardon Avenue Suite 1100San Juan, PR 00918General 787-620-3000Fax 787-620-30183M, Controltac, MCS are trademarks of 3M Company. ColorPainter is a trademark of OKI Data Infotech Corporation. All other trademarks are the property of their respective owners.© 3M 2016. All rights reserved. Please recycle.Bulletin Change SummaryFor the most current 3M Technical Information available to successfully use this product, please view this Bulletin electronically and click on the blue underlined links to view the relevant documents. This Bulletin has been substantially changed. Please read the entire Bulletin thoroughly.Release E APR-2016:•Updated Ink name throughout.Release D OCT-2015:•Changed name from “Seiko I Infotech” to “OKI Data Infotech” throughout document.•Changed name from “SIIT” to “OKI” throughout document.Release C JULY-2015:•Updated Bulletin to new template. This Bulletin has been substantially changed. Please read the entire Bulletin thoroughly.。

O第二纸盒给纸组件 (AR-M205)O第二纸盒给纸组件AR-RP6 MODEL目 录为确保安全性、可靠性，更换部品务必使用正规品。

指定的部品。

本手册仅供维修人员进行售后服务用，本手册内容如有更改，恕不通告。

SHARP CORPORATION部　品　手　册1234■外观给纸组件输送组件包装及附属品索引数码复合机选购件双面原稿输送器（RSPF）1外观1外观3输送组件3输送组件4包装及附属品4包装及附属品AR-D24单层纸盒AR-D25双层纸盒MODEL目 录为确保安全性、可靠性，更换部品务必使用正规品。

指定的部品。

本手册仅供维修人员进行售后服务用，本手册内容如有更改，恕不通告。

SHARP CORPORATION部　品　手　册123456■单层纸盒外观　（ＡＲ－Ｄ２４）单层纸盒给纸组件　（ＡＲ－Ｄ２４）双层纸盒外观　（ＡＲ－Ｄ２５）双层纸盒给纸组件　（ＡＲ－Ｄ２５）２５０页纸盒组件包装材料及附属品索引数码复合机选购件进纸组件1单层纸盒外观 (AR-D24)1单层纸盒外观 (AR-D24)2单层纸盒给纸组件 (AR-D24)2单层纸盒给纸组件 (AR-D24)4双层纸盒给纸组件 (AR-D25)4双层纸盒给纸组件 (AR-D25)5250页纸盒组件5250页纸盒组件6包装材料及附属品6包装材料及附属品■索引– 12 –COPYRIGHT © 2003 BY SHARP CORPORATION版权所有　翻印必究夏普办公设备（常熟）有限公司上海经营部中国上海浦东新金桥路２８号新金桥大厦１６０１室 ２００３年１０月中国印刷。

Quick Links 3M Graphics Warranties Technical Information Selector Safety Data Sheets (SDS)Flammability Videos Some of these links lead to web-based resources that are not product-specific.IJ280Product Description•For Solvent-, UV-, and Latex-Inkjet printing•2-mil, white, vinyl film Product Features•Pressure-activated adhesive for easy sliding, tacking, snap-up and repositioning •Comply™ v4 adhesive with air-release channels for fast, easy, bubble-free installations •Excellent hiding power •Flexible; conformable with less heat (especially when paired with 3M™ Gloss Wrap Overlaminate 8428G)•Superior conformability with heat for applications on recesses and deep channels •Removable with heat from most surfaces within the Warranty Period •Expected Performance Life of 10 years (unwarranted period for unprinted film with no graphic protection, applied to a flat, vertical, outdoor surface)Recommended Types of Graphics and End Uses•Wraps for vehicles, straight trucks, semi-trucks and semi-trailers; emblems or striping •Watercraft graphics (above the static water line only)•Non-vertical and horizontal vehicle wraps (when protected with specified 3M™ overlaminates)•Bus and transit graphicsWhen constructed and used as described in this Bulletin, these types of graphics and end uses may be warranted by the 3M™ MCS™ Warranty or the 3M Performance Guarantee. Please read the entire Bulletin for details.Recommended Compatible ProductsSee /graphicswarranties for a complete list of compatible products that are approved by 3M for use with the base film covered in this Bulletin and used for the creation of a graphic that may be eligible for the 3M™ MCS™ Warranty or 3M Performance Guarantee.OEM Inkjet Inks and Printers for the 3M Performance GuaranteeSee the 3M Performance Guarantee Matrix for a complete list of compatible OEM Inkjet Inks and Printers that are approved by 3M for use with the base film described in this Bulletin and used for the creation of a completed graphic that may be eligible for the 3M Performance Guarantee.Graphic Protection•3M™ Scotchcal™ Gloss Overlaminate 8418G •3M™ Gloss Wrap Overlaminate 8428G •3M™ Scotchcal™ Gloss Overlaminate 8518•3M™ Scotchcal™ Luster Overlaminate 8519•3M™ Scotchcal™ Matte Overlaminate 8520•3M™ Scotchcal™ Gloss Overlaminate 8528 with horizontal vehicle warranty •3M™ Envision™ Gloss Wrap Overlaminate 8548G with horizontal vehicle warranty •3M™ Envision™ Luster Wrap Overlaminate 8549L with horizontal vehicle warranty •3M™ Envision™ Matte Wrap Overlaminate 8550M with horizontal vehicle warranty •3M™ Scotchcal™ Ultra Matte Overlaminate 8915•3M™ Wrap Overlaminate Series 8900Application TapesSee 3M Instruction Bulletin AT-1 to determine what application tape is recommended for the film or finished graphic.2 Product Bulletin IJ280 - Revision A, February 2021Other Products•3M™ Edge Sealer 3950•3M™ Edge Sealer Tape 8914•3M™ Vehicle Channel Applicator Tool VCAT-2•3M™ Roller S (small hard roller)•3M™ Roller L (large hard roller)•3M™ Scotchgard™ Paint Protection Film SGH6Certificate of 3M™ MCS™ Warranty Graphic manufacturers who produce digitally printed graphics made with all 3M Graphics Products, including 3M Ink purchased through a qualified 3M Distributor or 3M Printing Partner, may register to be recognized with a Certificate of 3M™ MCS™ Warranty. Only graphic manufacturers having a current Certificate of 3M™ MCS™ Warranty are eligible to extend this warranty to their customers.NOTE: For non-digitally printed Finished Graphics, check your eligibility for the 3M™ MCS™ Warranty by viewing the Warranty Period found within the Product Bulletin or using the warranty selector at /graphicswarranties .CharacteristicsThese are typical values for unprocessed product. Processing may change the values.Physical CharacteristicsApplication Characteristics CharacteristicValue MaterialCast Vinyl Film Color White, opaque ThicknessWithout adhesive: 2 mil (0.05 mm)With adhesive: 3–4 mil (0.08–0.10 mm)AdhesivePressure-activated (slide, tack, snap-up, reposition) with air release channels Adhesive ColorGray LinerPolyethylene-coated paper Adhesion, Typical 24 hours after application (ASTM D3330-04)ABS: 3-4 pounds/inch (0.54–0.71 kg/cm)Aluminum, etched and degreased: 4-5 pounds/inch (0.72-0.89 kg/cm)Automotive clear coats: 2-3 pounds/inch (0.36–0.54 kg/cm)Painted aluminum: 2-3 pounds/inch (0.36-0.54 kg/cm)Tensile Strength (ASTM D882-18)5-6 pounds/inch at 73 °F (0.9-1.1 kg/cm at 23 °C) minimum Elongation (ASTM D3759-05)100% minimum at 73 °F (23 °C)Chemical Resistance Resists mild alkalis, mild acids, and saltExcellent resistance to water (does not include immersion)Characteristic ValueFinished Graphic Application Recommendation Surface type: Flat, simple curves, compound curves, deepchannelsSubstrate type: ABS, resins, chrome, glass, paintApplication Method: DryApplication temperature (air and substrate):•Flat without rivets: 40–100 °F (4–38 °C)•Curves or corrugations with rivets: 50–100 °F (10–38 °C)•Compound curves and/or watercraft: 60–90 °F (16–32 °C)Temperature Range After Application -65 to +225 °F (-54 to +107 °C) Not for extended periods of time at the extremesApplied Shrinkage (FTM14)<15 mil (<0.4 mm)Graphic RemovalRemovable with heat from most substrates within the Warranty Period at 50°F (10°C) minimum (air and substrate)Warranty InformationWarranty Coverage OverviewThe warranty coverage for eligible graphics is based on the user both reading and following all applicable and current 3M Graphics Product and Instruction Bulletins. The warranty period for eligible graphics is as stated in the 3M Graphics Warranties Matrices at the time that the film was purchased. Information found at /graphicswarranties includes:•3M Graphics Warranties Bulletin-This bulletin contains information on limitations and exceptions, and warranty period reductions for 3M Graphics Warranties. The war-ranty period may be reduced and stipulations may apply for certain constructions, applications, and graphic exposures as covered in this Bulletin.•3M Graphics Warranties Selector-Use this selector to search for your vertical warranty period by product type, ink type, film name, and/or ink/printer platform.•U.S. Desert Southwest Region Map-Use this map of hot, arid desert areas to determine if you are subject to reduced warranted durabilities.The warranties set forth in this Bulletin are made in lieu of all other express or implied warranties, including any implied warranty of merchantability, fitness for a particular purpose, or arising out of a course of dealing, custom, or usage of trade.3M Basic Product Warranty3M Graphics Products are warranted to be free of defects in materials and manufacture at the time of shipment and to meet the specifications stated in its applicable 3M Graphics Product Bulletin and as further set forth in the 3M Graphics Warranties Bulletin.Limited RemedyThe limited remedy applicable to each warranty is addressed in the 3M Graphics Warranties Bulletin found at /graphicswarranties.Limitation of LiabilityExcept where prohibited by law, 3M SHALL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO PURCHASER OR USER FOR ANY DIRECT (EXCEPT FOR THE LIMITED REMEDY PROVIDED IN THE 3M GRAPHICS WARRANTIES BULLETIN), INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LABOR, NON-3M MATERIAL CHARGES, LOSS OF PROFITS, REVENUE, BUSINESS, OPPORTUNITY, OR GOODWILL) RESUL TING FROM OR IN ANY WAY RELATED TO 3M'S GRAPHICS PRODUCTS, SERVICES, or THIS BULLETIN. This limitation of liability applies regardless of the legal or equitable theory under which such losses or damages are sought.Warranty Period MatricesSee the 3M Graphics Warranties Matrices at /graphicswarranties, for vertical warranty period information specific to your film.Additional LimitationsSee the 3M Graphics Warranties Bulletin at /warranties, for terms, additional limitations of your warranty, if any, and limitations of liability.Factors that Affect Graphic Performance LifeThe actual performance life of a graphic is affected by:•the combinations of graphics materials used.•complete ink drying or curing.•selection, condition and preparation of the substrate.•surface texture.•application methods.•angle and direction of sun exposure.•environmental conditions.•cleaning or maintenance methods.Product Bulletin IJ280 - Revision A, February 202134 Product Bulletin IJ280 - Revision A, February 2021Inkjet PrintingAlways read and follow the ink manufacturer’s written instructions on usage.Total Ink CoverageThe maximum recommended total ink coverage for this film is:•270% when printed with all approved 3M solvent inkjet inks.•280% when printed with all approved 3M UV inkjet inks.•280% when printed with all approved 3M latex inkjet inks.Do not exceed the recommended total ink coverage for the ink series used on this product. Having too high a total physical ink amount on the product results in media characteristic changes, incomplete drying, overlaminate lifting, and/or poor graphic performance. For additional details about total ink coverage, refer to the 3M Product and Instruction Bulletin for 3M inks or the 3M Performance Guarantee Matrixfor OEM inks.Completely Dry Graphicscovered under any 3M Graphic Warranty.See the specific ink’s 3M Product and Instruction Bulletin for more details.CuttingSee 3M Instruction Bulletin 4.1 for Sheeting, Scoring and Film Cutting details.Graphic ProtectionGraphic protection may improve the appearance, performance and durability of the graphic. Click on the graphic protection options listed in Product Bulletin or see the3M Graphics Market Product Catalog , for more information.Application TapesThere are two types of application tapes. See 3M Instruction Bulletin AT-1 to determine what application tape is recommended for the film or finished graphic.Premasking TapeIncreases stiffness during application while preventing stretching and damage. Use when little or no liner is exposed. See 3M Instruction Bulletin 4.3 for complete details.Prespacing TapeHolds cut and weeded letters or graphics in place during application and after removing the film liner, while preventing stretching and damage. Use when large amounts of liner are exposed. See 3M Instruction Bulletin 4.3 for complete details.Application and InstallationIn addition to other 3M Bulletins specified in this document, the following Bulletins provide details that you may need to successfully apply a graphic.•3M Instruction Bulletin 2.1 Design of graphics.•3M Instruction Bulletin 4.22 Lamination Basics for Inkjet Printed Graphics.•3M Instruction Bulletin 5.36 Application Techniques for Automobiles, Vans and Buses. Complete the 3M Pre-Installation Inspection Record found in this Instruction Bulletin prior to manufacturing or applying a graphic to an automobile, van, or bus.•3M Instruction Bulletin 5.4 Application, Fleet T rucks.•3M Instruction Bulletin 5.42 Application, Special Considerations for Watercraft. Complete the 3M Pre-Installation Inspection Record found in this Instruction Bulletin prior to manufacturing or applying a graphic to a watercraft.•3M Instruction Bulletin 5.5 Application, General Procedures for Interior and Exterior Dry Application.•3M Product and Instruction Bulletin V-Tools 3M™ Vehicle Channel Applicator Tools.around rivets. When using heat during application, make sure the film surface temperature does not exceed 212︒ F (100︒ C). For best results, always do a test application of a printed graphic to determine how much heat can be used without damaging theimage.recommends using a heat gun to make sure the film surface temperature reaches a minimum of 200° F (93° C) and does not exceed 225° F (107° C). When paired with 8428G, a post-heat temp range of 200-225 °F (93-107 °C) can be utilized. (Need official word on IJ280/8428G post-heat temp range)Pressure-activated AdhesiveThe pressure activated adhesive on this film offers:•Smooth sliding into position on a substrate;•Fast finger tacking to check position; and•Easy snap-up and repositioning when you need it.The snap-up and reposition feature is lost:•When firm pressure with a squeegee or other application tool is applied.•At application temperatures above 100︒ F (38︒ C) even if only light finger pressure was used for tacking.•If any part of the film is removed from the original liner and reapplied to the same or another liner.Working with Non-Visible Air Release ChannelsAir release channels are a characteristic of films with Comply™ adhesive that allow trapped air to exit through the edges of the graphic.•The channels will be damaged and effective air removal affected if you remove and attempt to change liners or reapply the same liner.•For the best results, always work from the center out to the edges of the graphic to allow trapped air to exit through the air release channels. If the channels are closed off by firm pressure and air is trapped, use an air release tool to aid in removing air bubbles. See 3M Instruction Bulletin 5.4 for details.StretchabilityMany finished graphic constructions can be stretched without primer or relief cuts and maintain lift resistance.•For Straight trucks, semi-trucks and semi-trailers, see 3M Instruction Bulletin 5.4 for details and exceptions.3M™ Tape Primer 94 and Adhesion Promoter 1113M recommends that where the film will be stretched, use primer to maximize a graphic’s bond to its substrate.Product Bulletin IJ280 - Revision A, February 20215© 3M 2021. All rights reserved. 3M, Comply, Scotchcal, Envision, and MCS are trademarks of 3M. Used under license in Canada. All other trademarks are property of their respective owners.Revision A, February 2021 Please recycle. Commercial Solutions3M Center, Building 220-12E-04St. Paul, MN 55144/Graphics Maintenance and CleaningUse a cleaner designed for high-quality painted surfaces. The cleaner must be wet, non-abrasive, without solvents, and have a pH value between 3 and 11 (neither strongly acidic nor strongly alkaline). See 3M Instruction Bulletin 6.5 for details.RemovalRemoval may require heat. The ease and rate of removal depends on a number of factors. See 3M Instruction Bulletin 6.5 for details.Shelf Life, Storage and ShippingShelf LifeThe shelf life is never more than 3 years from the date of manufacture on the original box.If the film is processed, the shelf life is changed to 1 year from the processing date, but not later than the 3 year maximum from the manufacturing date.Storage Conditions•40︒ to 100 ︒F (4︒ to 38 ︒C)•Out of sunlight •Clean, dry area •Original container •Bring the film to room temperature before useShipping Finished GraphicsFlat, or rolled printed side out on 6 inch (15 cm) or larger core. This helps prevent the application tape, if used, from popping off.Health and Safetyhealth, safety and environmental information. To obtain SDS sheets for 3M products go to /SDS , or by mail or in case of an emergency, call 1-800-364-3577 or 1-651-737-6501.When using any equipment, always follow the manufacturer’s instructions for safe operation.。

Labels alert personnel handling bags, boxes or other carriers that the contents are static-sensitive. 3M ESD Warning Labels provide the ESD symbol and warning message. Destructible-type labels are “tamper evident,” allowing personnel to monitor if a bag has been opened.Reusable type labels allow personnel to reopen the bag without tearing the label.3M Signs and 3M™ Aisle Marking Tape may be used to clearly identify the areas requiring staticprotective measures. Apply them to doors, floors, walls, tote boxes, or to any area to indicatestatic sensitive parts.Attention Label7102Yellow w/ Black Type. Room to write. Static Warning Symbol. 1See product photoson the next page.3Electronic Solutions DivisionStatic Control Products926 JR Industrial DriveSanford, NC 27332-9733Toll-Free: 866-722-3736International: 919-718-0000Email:********************See 3M static control products, data sheets, and more at 3M is a trademark of 3M Company.In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the Warranty stated below. Important NoticeBefore using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Warranty; Limited Remedy; Limited Liability.3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.Please recycle. Printed in USA.© 3M 2013. All rights reserved.98-0799-1105-7 JHA1. 71022. ALABEL3. ALABEL5/8X24.CLABEL2X25. CLABEL4X46. 72027. 129LABEL8. ROHSLABEL9. 710110. 720116. AISLETAPE5413. ESDSIGN4X1014. ESDSIGN8.5X1115. SIGN17X22E11. 113LABEL12. DRILABELSee product descriptionson the first page.。