Price list for remote control and switch(201108)

1CSN ChargesCharacteristics of contract types basic standard premium Service times 24/7 24/7 24/7 General services 1)inclusive inclusive inclusive Active monitoring inclusive Setup charge 2)€ 195,00 € 195,00inclusive Price for CSN first contract 3)€ 50,00 per month € 77,00 per month € 195,00 per month Price for CSN second contract 3)€ 25,00 per month € 38,50 per month € 97,50 per month Charge for changes 4)€ 195,00 inclusive inclusive Extended incident processing 5)€ 25,00 per incident inclusive inclusiveSelf-assessment information security 6)€ 200,00 € 200,00 inclusive1) General services independent of CSN contract type:▪Single point of contact (SpoC): Service Support Center of the operational services GmbH & Co. KG (OS) with services regarding incident management and processing of administrative activities / ser-vice requests▪Service numbers: +49-375-60619-904 (free of charge within Germany) and +49 375 6061 9904 (in-ternational) to record incidents and requests during the agreed service times▪Comprehensive consulting services regarding service portfolio and technical network connection types▪Setup, documentation and testing (based on TCP/IP) of the network connection and handover to operation▪Verification of existence of NDA (Non-Disclosure Agreement) with the Volkswagen Group incl.monitoring of validity▪Verification of existence of a release for relevant location(s) of the customer concerning information security2) Charge for setup of connection to the partner network of Volkswagen/Audi (concerns all processing activities from connection request to final connection test based on TCP/IP). In case of setup the network connection to both, Volkswagen and Audi partner network, the setup charge is to be paid twice.3) The monthly price includes the provision of the connection to the Volkswagen and/or Audi partner network, operation and service.The connection to one of the two partner networks (either Volkswagen or Audi) requires the conclusion of a CSN first contract. If connection to the second partner network is required a CSN second contract must be concluded.Precondition for the conclusion of a CSN second contract is the existence of a CSN first contract. The CSN first contract and the CSN second contract must have the same contract type.The change to a higher-value CSN contract type is possible at any time, conversely, only according to CSN contract termination conditions.Each further connection of a certified net provider for technical connection to the partner network of Volkswagen or Audi requires an additional CSN second contract.At the time of termination of the CSN first contract, the CSN second contract replaces the CSN first con-tract from the date of termination. Consequently, the former CSN second contract will be charged to the conditions of the CSN first contract.4) Charge for changes of connection data as well as configuration changes, which are not part of the CSN general services and which were caused by the customer. Charges for changes by certified net providers are not included.5) The CSN incident processing is free of charge, if the Service Support Center provides a first solution. If it is necessary to consult the 2nd and 3rd support levels of the OS the incident processing and error han-dling will be subject to charges in the contract type “basic”.6) Only applies to data classification “internal” in case of connection to the Audi resp. Volkswagen partner network and to locations at which data from the Volkswagen Group is to be accessed.2Charges for Internet VPN (client-to-site)The license model requires one hardware token per Internet-VPN user. The connection type Internet VPN (client-to-site) is executable only for Windows operating system, version Windows 7 or higher.Charge for provision per hardware token (user) € 90,00 one-timeSetup charge per hardware token (user) € 70,00 one-timeBasic charge per hardware token (user) € 30,00 per month3Prices per PDM PackagePDM package Payment method Prices per monthstandard annually € 254,00 quarterly € 263,00standard PLUS annually € 381,00 quarterly € 390,00premium annually € 529,00 quarterly € 538,00PDM standard PDM standard PLUSECA SCF VWDMSECA SCF VWDMSHyperKVSPDM premiumECA SCF VWDMSCONNECTHyperKVSSyncrofit ZMB4HyperKVS TrainingsA concluded PDM contract “standard Plus” or “premium” entitles to participate free of charge in 1 on-sitetraining (one day and one participant per contract year) or in 2 online trainings (eClassroom) (one partic-ipant each per contract year). All further training courses (also for PDM contract “standard”) are fee-based.HyperKVS Basic On-site training (German) € 580,00 HyperKVS Advanced On-site training (German) € 580,00 eClassroom HyperKVS Quickstart Online training (German/English) € 290,00 eClassroom HyperKVS Advanced Online training (German/English) € 290,00Cancellation of both, classroom and online training, has to be made in written form.If the training is cancelled timely, up to four weeks before the training starts, the participant has the right to withdraw from the training contract free of charge.If the training is cancelled less than four weeks before the start of the training or in case of non-attendance on the training day, the customer has to bear full training charges. There will be no refund of those charges.Detailed information can be found at:https://www.operational-services.de/en/supplier-solutions/trainings/5GeneralAll prices quoted are net plus the statutory sales tax applicable at the time the relevant invoice is issued. Additional services can be provided by separate agreement.。

报价单用英语怎么说导读：我根据大家的需要整理了一份关于《报价单用英语怎么说》的内容，具体内容：报价单主要用于供应商给客户的报价，类似价格清单。

那么你知道吗?下面我为大家带来报价单的英语说法，供大家参考学习。

报价单的英语说法1：quotation英 [...报价单主要用于供应商给客户的报价，类似价格清单。

那么你知道吗?下面我为大家带来报价单的英语说法，供大家参考学习。

报价单的英语说法1：quotation英 [kwutein] 美 [kwoten]报价单的英语说法2：offer sheet英 [f i:t] 美 [f it]报价单相关英语表达：外贸报价单 Price List for Foreign Trade请求报价单 request for quotation国际钻石报价单 Rapaport Diamond Report销售报价单 Sales Quotation报价单输出 Quotation Printing报价单英语说法例句：保险公司要三家修理这辆汽车的报价单。

The insurance company requires three quotations for repairs to the car.先要报价单,再开始维修。

Always get a quote before proceeding with repair work.你今天能给我一份报价单吗?Could you give me a price list today?准备询价，进行谈判并获得报价单;Prepare enquiries and obtain and negotiate quotations.在纸带上打印存货报价单。

Automatically prints stock quotations on a paper tape.报价单上的价格是实盘吗?Be the price on the list firm offer?请在报价单中注明交货时间。

PRICE LIST2012 Manufactured Specifications Price (HKD)CT (Smart Luxury)$309,560*CT200h Luxury L4/1,798cc/136PS/142Nm E-CVT Hybrid Transmission($366,800 - $57,240 FRT)CT200h F-Sport L4/1,798cc/136PS/142Nm E-CVT Hybrid Transmission$397,900*($472,900 - $75,000 FRT)CT200h Ultimate L4/1,798cc/136PS/142Nm E-CVT Hybrid Transmission$419,500*($494,500 - $75,000 FRT) ISC (Capturing Attention)IS250C Luxury V6/2,500cc/208PS/252Nm 6-speed Auto with Multi-mode Control $538,700IS250C Ultimate V6/2,500cc/208PS/252Nm 6-speed Auto with Multi-mode Control $559,900RX (Raving Luxury)$639,400RX270 Ultimate L4/2,672cc/187PS/252Nm 6-speed Super Electronic Control(Limited Offer: $559,900) RX350 F-Sport V6/3,456cc/277PS/346Nm 6-speed Super Electronic Control $644,700RX350 Ultimate V6/3,456cc/277PS/346Nm 6-speed Super Electronic Control $699,500RX450h Luxury V6/3,456cc/299PS/317Nm E-CVT Hybrid Transmission$725,400*($800,400 - $75,000 FRT)RX450h F-Sport V6/3,456cc/299PS/317Nm E-CVT Hybrid Transmission$755,600*($830,600 - $75,000 FRT)(Limited Offer: $725,400*)(Limited Offer: $800,400 - $75,000 FRT) RX450h Ultimate V6/3,456cc/299PS/317Nm E-CVT Hybrid Transmission$791,600*($866,600 - $75,000 FRT)(Limited Offer: $755,600*)(Limited Offer: $830,600 - $75,000 FRT)# Official retail price list for each model is available separately.# First Registration Tax: Tax is subject to change at discretion of Commissioner for Transport and/or additional accessories to be fitted within 6 months from date of first registration.# Crown Motors Ltd. warrants each new vehicle for 5 years or 100,000 km (whichever comes first), with related conditions apply.# All prices are subject to final PRP approval from C&E.# For any further enquiries, please contact our Lexus sales consultants at 2511 9430 or 2880 4151.* The Government’s tax incentives for environment-friendly petrol private cars have already been deducted from the retail price of CT200h series, RX450h series, GS450h series and LS600hL series.PRICES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.Effective : 20 October 2012PRICE LIST2012 Manufactured Specifications Price (HKD)GS (Performance Luxury)GS250 Luxury V6/2,500cc/209PS/253Nm 6-speed Auto with Multi-mode Control $529,900GS250 F-Sport V6/2,500cc/209PS/253Nm 6-speed Auto with Multi-mode Control $609,900GS250 Ultimate V6/2,500cc/209PS/253Nm 6-speed Auto with Multi-mode Control$649,900(Limited Offer: $559,900) GS350 Ultimate V6/3,456cc/316PS/378Nm 6-speed Auto with Multi-mode Control $766,800GS350 F-Sport V6/3,456cc/316PS/378Nm 6-speed Auto with Multi-mode Control $766,900GS450h Luxury V6/3,456cc/345PS/345Nm E-CVT Hybrid Transmission$736,900*($811,900 - $75,000 FRT)GS450h F-Sport V6/3,456cc/345PS/345Nm E-CVT Hybrid Transmission$866,730*($941,730 - $75,000 FRT)(Limited Offer: $766,500*)(Limited Offer: $841,500 - $75,000 FRT) GS450h Ultimate V6/3,456cc/345PS/345Nm E-CVT Hybrid Transmission$866,730*($941,730 - $75,000 FRT)LS (True Luxury) 2013 ModelLS460 5-seater V8/4,608cc/387PS/493Nm 8-speed Auto with Multi-mode Control $1,543,300LS460L 5-seater V8/4,608cc/387PS/493Nm 8-speed Auto with Multi-mode Control $1,622,420LS600hL 5-seater V8/4,969cc/444PS/520Nm E-CVT Hybrid Transmission$1,899,590*($1,974,590 - $75,000 FRT)LX460 (Cross-boundary Luxury)LX460 8-seater V8/4,608cc/318PS/460Nm 6-speed Auto with Multi-mode Control $1,557,920# Official retail price list for each model is available separately.# First Registration Tax: Tax is subject to change at discretion of Commissioner for Transport and/or additional accessories to be fitted within 6 months from date of first registration.# Crown Motors Ltd. warrants each new vehicle for 5 years or 100,000 km (whichever comes first), with related conditions apply.# All prices are subject to final PRP approval from C&E.# For any further enquiries, please contact our Lexus sales consultants at 2511 9430 or 2880 4151.* The Government’s tax incentives for environment-friendly petrol private cars have already been deducted from the retail price of CT200h series, RX450h series, GS450h series and LS600hL series.PRICES AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.Effective : 20 October 2012。

国际贸易产品报价流程英语The Process of Quoting Products in International Trade.International trade, encompassing the exchange of goods and services across national borders, is a crucial aspect of global economic growth. Central to this exchange is the quoting process, which involves the determination and communication of prices for various products. This article delves into the intricacies of the product quoting process in international trade, highlighting the key steps and considerations involved.1. Market Research and Analysis.Before quoting prices for products, it's essential to conduct thorough market research. This involves analyzing demand and supply trends, identifying competitors, and understanding the target market's preferences and pricing sensitivities. Market analysis helps businesses gain insights into the overall market dynamics and formulateappropriate pricing strategies.2. Cost Analysis.Cost analysis is a crucial step in determining the prices for products. It involves breaking down the total costs associated with producing or acquiring the product, including raw materials, labor, overheads, and other expenses. Understanding the cost structure helps businesses assess the profitability of different pricing options and ensure that their quotes are competitive and profitable.3. Pricing Strategy.Based on the market and cost analyses, businesses need to formulate a pricing strategy. This involves considering various factors such as pricing objectives (e.g., market penetration, profit maximization), pricing methods (e.g., cost-plus pricing, market-based pricing), and pricing adjustments for factors like discounts, allowances, and freight costs. The pricing strategy should aim to balance the needs of the business and the market, ensuring bothprofitability and competitiveness.4. Quote Preparation.Once the pricing strategy is determined, the next step is to prepare the quote. The quote should clearly specify the product, its specifications, quantities, unit prices, total cost, terms of payment, delivery details, and any other relevant information. Quotes should be professional, detailed, and accurate, reflecting the business's commitment to transparency and professionalism.5. Negotiation.In international trade, negotiation is often a crucial part of the quoting process. Buyers and sellers may engage in discussions to agree on prices, terms, and other contract details. Effective negotiation requires good communication skills, market knowledge, and the ability to strike a balance between the interests of both parties.6. Contract Execution.Once the quote is accepted and the terms are agreed upon, the contract is executed. This involves the formal documentation of the agreement, including the terms of the deal, delivery schedule, payment terms, and other relevant details. Contract execution ensures that both parties are bound by the agreed-upon terms and conditions.7. Post-Sale Support and Follow-Up.After the contract is executed, it's essential to provide post-sale support and follow-up. This involves ensuring timely delivery, addressing any product-related issues, and maintaining good communication with the buyer. Post-sale support helps build trust and maintain long-term relationships with customers.In conclusion, the quoting process in international trade is a complex yet crucial aspect of business operations. It requires a thorough understanding of the market, cost analysis, strategic pricing, professional quote preparation, effective negotiation skills, contractexecution, and post-sale support. By following these steps, businesses can ensure that their quotes are competitive, profitable, and tailored to the needs of the target market.。

Inquiry Letter General TemplateDear [Contact Person],I hope this letter finds you in good health.I am writing to inquire about the availability and pricing of [product/service] offered by your esteemed company. I have done extensive research in the market and have found your company to be highly recommended for the quality and reliability of your products/services.I would like to obtain detailed information regarding the following:1.Product/Service Description: Please provide a detailed description ofthe product/service, including specifications, features, and any unique selling points.2.Pricing: Kindly provide the price list or cost breakdown for theproduct/service, including any discounts or promotional offers that may beapplicable. Additionally, please clarify if there are any additional charges such as shipping, taxes, or installation fees.3.Minimum Order Quantity: Please specify the minimum order quantityrequired for the product/service and whether there are any volume discounts available.4.Delivery Time: Kindly indicate the estimated delivery time from thedate of order placement. It would also be helpful to have information on any expedited or express delivery options, if available.5.Payment Terms: Please provide details of the accepted paymentmethods and the payment terms, including any applicable down payments,milestones, or credit options.6.Warranty and After-Sales Support: Kindly specify the warranty periodfor the product/service and outline the after-sales support provided by your company, such as maintenance, repairs, or returns.7.References: If possible, please provide references or case studies ofclients who have previously purchased the product/service and their feedback or testimonials.I would appreciate if you could send the requested information at your earliest convenience. Should you require any additional details or have any questions regarding our inquiry, please do not hesitate to contact me via email or phone.Thank you for your attention to this matter, and I look forward to receiving your prompt response.Yours sincerely,[Your Name] [Your Company] [Contact Information]。

英文报价单范文wordQuotation。

Date: 10th October 2022。

To: XYZ Company。

Address: 123 Main Street, Anytown, USA。

Attn: Mr. John Smith。

Dear Mr. Smith,。

We are pleased to provide the following quotation for the products and services requested by your company:1. Product: Widget A。

Quantity: 100 units。

Unit Price: $10 per unit。

Total Price: $1000。

2. Product: Widget B。

Quantity: 200 units。

Unit Price: $15 per unit。

Total Price: $3000。

3. Service: Installation and Maintenance。

Description: Our team will provide installation and maintenance services for the widgets purchased. This includes installation of the products and regular maintenance checks.Price: $500。

4. Shipping and Handling。

Description: Shipping and handling costs for the products to be delivered to your company's location.Price: $200。

Total Price: $5700。

Terms and Conditions:1. Payment Terms: 50% of the total amount is due upon acceptance of this quotation, with the remaining 50% due upon completion of the installation and maintenance services.2. Delivery: The products will be delivered within 30 days of receipt of the initial payment.3. Validity: This quotation is valid for 30 days from the date of issue.4. Taxes and Duties: All applicable taxes and dutiesare the responsibility of the buyer and will be added to the total amount due.5. Warranty: Our products come with a 1-year warranty against defects in materials and workmanship.We hope that the above quotation meets your requirements. Should you have any further questions or require additional information, please do not hesitate to contact us.Thank you for considering our products and services. We look forward to the opportunity to work with your company.Yours sincerely,。

报价单合同英文模板This Quotation Contract is entered into between [Supplier Name], located at [Supplier Address], hereinafter referred to as the "Supplier," and [Buyer Name], located at [Buyer Address], hereinafter referred to as the "Buyer," on [Date].1. Scope of WorkThe Supplier agrees to provide the following goods and services to the Buyer, as outlined in the attached quotation:- Item 1: Description, quantity, unit price- Item 2: Description, quantity, unit price- Item 3: Description, quantity, unit priceAdditional goods and services may be added to this contract with the mutual agreement of both parties.2. PriceThe total price for the goods and services outlined in this contract is [Total Price]. This price is inclusive of all taxes and fees, unless otherwise specified. Payment terms are as follows: - 50% deposit due upon signing of this contract- 50% balance due upon completion of workPayments are to be made in [Currency] to the Supplier's bank account, details of which will be provided to the Buyer upon request.3. DeliveryThe Supplier agrees to deliver the goods and services outlined in this contract within [Delivery Timeframe] of receipt of the deposit payment from the Buyer. Any delays in delivery will be communicated to the Buyer in a timely manner.The Buyer agrees to provide all necessary information and access required for the Supplier to complete the work within the agreed timeframe.4. Quality and WarrantyThe Supplier warrants that all goods provided under this contract will be of satisfactory quality and fit for the purpose for which they are intended. Any defects in the goods must be reported to the Supplier within [Warranty Period] of delivery, and the Supplier will repair or replace the goods at no additional cost to the Buyer.5. TerminationEither party may terminate this contract with written notice if the other party is in material breach of the terms of this contract and fails to remedy the breach within [Notice Period] of receiving notice.6. ConfidentialityBoth parties agree to keep all information received from the other party confidential and not to disclose it to any third party without the consent of the other party.7. Governing LawThis contract shall be governed by and construed in accordance with the laws of [Jurisdiction], and any disputes arising under this contract shall be resolved through arbitration in [Arbitration Location].Both parties agree to the terms and conditions outlined in this Quotation Contract and hereby affix their signatures below:_________________________ _________________________Supplier BuyerDate: _________ Date: _________。

「商务英语」外贸询价报价谈判必备句子，远离职场困境词汇1.询盘，询价 enquiry2.出价，递盘 bidding3.还盘，还价 counteroffer4.立即回复 reply immediately5.含佣价 price including commission6.现价，时价 prevailing/current price7.国际市场价格 international market price8.参考价格 reference price9.现货价格 spot price10.净价 net price句型1.This is our price list . 这是我们的价目表。

2.I'm waiting for your offer . 我正在等你的报价。

3.I'm sorry to say that the price you quote is too high .我很遗憾你们报价太高了。

4.I am afraid you won’t find another company who will give you a cheaper price than ours.恐怕你不能从其它公司获得比我司更便宜的报价了。

5.Our offer was based onreasonable profit .not on wild speculation .我们的报价以合理利润为依据，不是漫天要价。

6.Please send us samples and quote us your lowest prices for…请惠寄样品并报你方。

的最低价7.Please let us have information as to the price and quality of the goods.请告知该商品的价格和质量。

8.We would appreciate your sending us the latest samples with their best prices.请把贵公司的最新样品及最优惠的价格寄给我们，不胜感激。

price list中文翻译
price list中文翻译：价格清单。

常见释义
[词典] 价格清单;
[例句]We are seeking portland cement please sent price list.
我们正寻求波特兰水泥，请寄来价格清单。

名词price list:
a listing of prices for different goods or services
例句：
The price list wakened Mom from her dreams of owning a house in the suburb. 报价单使母亲意识到不可能在郊区买房子了。

In reply to your inquiry, we have sent you our latest price list.
为答复你方的询价，我们寄去了最新的价格单。

The company reissued its catalogue with a new price list.
这个公司重新发行了带有新价格表的商品目录。

Airmail revised price list but full range sample within fortnight.
航空寄上订正价格表，全套样品两周内寄出。

设备报价单英文范文In today's fast-paced business environment, having a well-structured and comprehensive equipment price list is crucial for any organization. This document serves as a vital tool for effectively managing inventory, streamlining purchasing processes, and ensuring transparent pricing for customers or clients. The purpose of this essay is to provide a detailed guide on how to create an effective equipment price list in English, drawing from best practices and industry standards.The first and most important step in creating an equipment price list is to gather all the necessary information about the products or services being offered. This includes details such as the item name, model number, description, unit of measurement, and the associated cost or price. It is essential to ensure that the information is accurate, up-to-date, and consistent across all products or services. This will help to avoid any confusion or discrepancies that could lead to billing errors or customer dissatisfaction.Once the necessary information has been collected, the next step isto organize the data in a clear and logical manner. This can be achieved by grouping similar items together, such as by product category, manufacturer, or functionality. This will make it easier for customers or clients to navigate the price list and quickly locate the specific items they are interested in. Additionally, it is important to include clear and concise headings and subheadings to further enhance the overall structure and readability of the document.One of the key components of an effective equipment price list is the inclusion of detailed product descriptions. These descriptions should provide a comprehensive overview of the item, including its features, specifications, and any relevant technical information. This will help customers or clients to make informed purchasing decisions and ensure that they are selecting the right product for their needs. It is also important to include any relevant warranty information or service agreements that may be associated with the equipment.Another important aspect of an equipment price list is the pricing structure. This should be clearly outlined, with any applicable discounts, volume pricing, or special offers prominently displayed. It is also important to ensure that the pricing is competitive and in line with industry standards. This will help to build trust and confidence with customers or clients, and can also help to differentiate the organization from its competitors.In addition to the pricing information, it is also important to include any relevant shipping or delivery details. This may include information on shipping times, delivery methods, and any associated costs. This will help to ensure that customers or clients have a clear understanding of the total cost of their purchase, including any additional fees or charges.Finally, it is important to regularly review and update the equipment price list to ensure that it remains accurate and relevant. This may involve adjusting prices to reflect changes in market conditions, updating product information to reflect new features or specifications, or adding new products or services to the list. By keeping the price list up-to-date, the organization can ensure that it is providing customers or clients with the most accurate and reliable information possible.In conclusion, the creation of an effective equipment price list in English is a critical component of any successful business. By following the best practices outlined in this essay, organizations can create a comprehensive and user-friendly document that will help to streamline purchasing processes, build trust with customers or clients, and ultimately drive business growth and success. Whether you are a small startup or a large multinational corporation, having a well-structured and up-to-date equipment price list is essential for success in today's competitive business landscape.。

一份完整的英文报价单词简介：英文报价单因为一个朋侪托付查点英文报价单的东西,所以才有了昔日这文章!最初要关照你的是,DIMENSIONS外箱尺寸支/箱理当是指每箱有几支可是产品不一样有的时候说法也不一样呀假如是我就翻译成pcs...英文报价单因为一个朋侪托付查点英文报价单的东西,所以才有了昔日这文章!最初要关照你的是,externaldimensions外箱尺寸支/箱理当是指每箱有几支可是产品不一样有的时候说法也不一样呀假如是我就翻译成pcs/carton灯罩lampshade-----------感谢木易好意援手一、报价单的头部（Head）01，卖家枝节材料（举例）工厂标记（FactoryLogo）公司名称（Company）实在地址（DetailedAddress）邮政编码（PostCode）连贯人名（Contact职位名称（Jobtitle）电话号码（TelephoneNo.）传真号码（FaxNo.）手机号码（MobileNo.）邮箱地址（E-mailAddress）聊天方法（MessengerOnline）公司网址（WebsiteAddress）02，买家枝节材料（举例）工厂标记（FactoryLogo）公司名称（Company）实在地址（DetailedAddress）邮政编码（PostCode）连贯人名（Contact）职位名称（Jobtitle）电话号码（TelephoneNo.）传真号码（FaxNo.）手机号码（MobileNo.）邮箱地址（E-mailAddress）聊天方法（MessengerOnline）公司网址（WebsiteAddress）03，报价单的抬头：报价单题目（Quotation/QuotationForm/PriceList）参考编号（ReferenceNo.）报价日期（Date）有效日期（Validdate）外观色彩（Colors）光源范例（TypeofLamp-house）光源数量（Nos.oflamp-house）光源色彩（Colorsoflamp-house）三、产品技巧参数（Pr oduct’sTechnicalParameters）01，电力类产品技巧参数：电流、电压、电阻、电弧、功率、频率、负载等。

报价模板英语作文Introduction:In the competitive world of business, presenting a quotation that not only captures the essence of the product or service but also resonates with the client's needs is crucial. Awell-structured quotation template in English can make allthe difference in securing a deal. This essay will explorethe key elements of an effective quotation template andprovide insights into how to create one that stands out.Body:1. Clear and Concise Heading- The heading should immediately inform the reader aboutthe nature of the document. It should include the company name and the word "Quotation" in a prominent and professional font.2. Contact Information- Below the heading, include your company's contactdetails such as the address, phone number, email, and website. This ensures that the client can easily get in touch with you.3. Client Details- Show professionalism by addressing the client directly. Include the client's name, company name, and contact detailsto personalize the quotation.4. Quotation Details- Clearly state the quotation number, date, and validity period. This provides a sense of urgency and helps the client understand the timeframe within which the offer stands.5. Itemized List of Products or Services- Use a table or list format to detail each item or service being offered. Include descriptions, quantities, unit prices, and extended prices for clarity.6. Terms and Conditions- Outline the payment terms, delivery dates, and any other conditions that the client needs to be aware of. This helps to manage expectations and avoid misunderstandings.7. Total Sum and Currency- Provide a clear total of the quotation, including any applicable taxes or discounts. Ensure the currency is specified to avoid confusion.8. Call to Action- Encourage the client to take the next step, whether it's signing the quotation, making a payment, or contacting youfor further discussion.9. Signature and Company Logo- End the quotation with a professional signature from an authorized representative and include your company's logo for brand recognition.Conclusion:A well-crafted quotation template is a reflection of your company's professionalism and attention to detail. Byfocusing on clarity, personalization, and a structured layout, you can create a template that not only secures business but also enhances your company's reputation. Remember, the goalis to make the client's decision to choose your services as easy and compelling as possible.Remember to proofread your quotation template for any grammatical errors or inconsistencies before using it to ensure it represents your company in the best light possible.。

询价信的英语作文模板Dear [Recipient's Name],Subject: Inquiry for [Product/Service Name]I hope this message finds you well. I am writing to inquire about the availability and pricing of your [Product/Service Name], which I came across on your website [website link if applicable].[Your Company Name] has been looking to expand our range of [products/services] and I believe your [Product/Service Name] could be a valuable addition to our offerings. We are particularly interested in the following specifications:1. [Specification 1]2. [Specification 2]3. [Any other specifications]Could you please provide us with the following details:- The price list for the [Product/Service Name], includingany bulk purchase discounts.- The minimum order quantity required.- The lead time for delivery, including any expedited options. - Any warranty or after-sales support that comes with the [Product/Service Name].Additionally, we would appreciate it if you could share any promotional materials, such as brochures or catalogs, that showcase your range of [products/services].We are also interested in the possibility of a trial order to evaluate the quality and suitability of your [Product/Service Name] for our needs. Could you please advise on the terms and conditions for such an arrangement?We look forward to the opportunity to establish a long-term business relationship with your esteemed company. Your prompt response will be highly appreciated.Thank you for considering our inquiry. Please feel free to reach out to me at [Your Contact Information] for further discussion.Best regards,[Your Full Name][Your Position][Your Company Name][Your Company Address][Your Contact Number][Your Email Address]。

All Prices are in US DollarsFastCAM ® – NC (Software) Systems complete CAD compatible drawing and nesting, smart postprocessorsFastCAM® has over 40 post processors. Your individual machine controller must be specified at time of order.Code Product Fast FactsApplicationPrice FC1.7FastCAM ®NCDrawing, NC, no nesting, no ‘multi’ features. Includes these trademarked products: FastCAM, FastPLOTIncludes CAD compress and CAD clean. Great value for single part cutters. Draw and path manually.*Add FastNEST or FastPATH later if and when required.$995.00FC2.1FastCAM ®StandardSingle Plate, NC ÎNC, True Shape Semi Automatic Nesting.Includes these trademarked products: FastCAM, FastPLOT & FastNEST interactive (semi automatic nesting).Also includes CAD smart tools.NEW! Now includes AutoCAD DWG import. Appropriate where production levels aren't as critical or demanding (Repetitioncutters, low duty cycle etc). Full featured but manual.* Upgrade to the Professional Edition at any time.$2,495.00FC2.2FastCAM ®ProfessionalFull Shape fully automatic nesting. Multi Plate, Multi input, Multi OutputIncludes these trademarked products: FastCAM, FastPLOT, FastPATH & FastNEST Full Automatic NestingAlso includes CAD smart tools,NEW! Now includes AutoCAD DWG import Common Cut Pairs & Gas Axe technology for skeletal plate breakup.The most popular and our recommended system. Offers best efficiency and best value as a complete professional drawing system with NC verification, Automatic Nesting and Automatic Pathing.Also includes Bulk CAD features and the ability to move pierce function before and after nesting.$4,995.00FastCAM ® - Laser Systems complete CAD compatible drawing and nesting, smart postprocessorsFCL2.0NC DirectAccepts a CAD drawing directly into Laser. CAD Clean, Pathing, Hole avoidance, Lead In’s/outs. Graphic program verifies and outputs NC code.No programming required .Runs directly on Machines with MS Windows based controllers DXF, IGES, CAM Î NC$3,495.00FCL2.1 FastCAM ®Standard Interactive (semi automatic nesting)Includes FastCAM NC, FastPLOT & FastNEST TextMARKERSingle Plate, DXF, IGES, CAM Î NC, True Shape Semi Automatic Nesting $4,495.00 FCL2.2FastCAM ®ProfessionalFastCAM, FastPLOT, FastPATH & FastNEST Fully Automatic Nesting, TextMARKER, FontGEN & other Laser functions.Full Shape fully automatic nesting. Multi Plate, Multi input, Multi Output$7,995.00FastCAM ® – Quotation/Estimation Systems (Service Center Volume Breaks & Site Licensing available)FCQ1FastCAM ®QE™Comprehensive, Purpose Built QuotationSystem w/Optimizer for Metal Service Centers. Contains both Linear and Plate basedoptimization with the least percentage scrap. Available for Profile or Long Quoting Only. Includes scalable multiuser SQL database.Produces an Email or fax ready quote after nesting, with full allowance for all remnant, scrap and processing costs. Estimate & material Optimization. Profiling, Shearing: Parametric, True Shape, RectangularSawing, Drilling for Long products, Beams, Channels, Angles etc.POA Can be licensed per user, per site, orper company FCQXML XML Output OptionAllows FastCAM QE to output quote files in a descriptive ‘standard’ way (meaning most other applications can query quote information). Important Note! This type of integration also requires some modification to your accounting, MRP or ERP system.$2,500.00 MTOFastCAM ®MTOExcel like program with drop down catalog for quick structural steel take-off. Creates BOM’s in minutes.Use and distribute freely to colleagues and customers for single data entry. Feed data into QE to automate costing.FreewareNote: Although not categorized as quotation programs, FastPLOT and FastCUT offer benefits to estimators.FastCAM ® – Service and Maintenance for FastCAM NC Systems and FastSHAPESFCWS Additional Workstation Licence Additional licence for your existing software$1,250.00 FCT Training2 Day on site Training within N.A. only, inc travel & accommodation$2,650.00 FSERService, Maintenance AgreementSMA - Annual Software Maintenance/Upgrade Agreement for Twelve Months$900.00All Prices are in US DollarsFastSHAPES® - Thick/Heavy Plate Development NC Suite – Tackle even the largest jobs with easeComplete transitions in minutes ready to send to the burning machine with line marking and the number of degrees for forming every bend. FastSHAPES® coversthe most complex to the simplest of shapes for the fabricator. All read directly into 2D and 3D CAD systems. Includes Online Help and User Tips.Code Name Description TYPICAL APPLICATIONFB1.1 Dr Cone Mitred right conical developments Educational FB1.2 ELBOW Constant radius lobster Bulk Materials Handling - chutesFluids Conveying - transitioning bends, vents.FB1.3 RORT Rectangle to round Anywhere a Rectangle - Offset Round Transformer is needed,especially with thick plate. Ducts, flues, shrouds etc..FB1.4 OBCONE Oblique cone Forms Part of more complex structure structures, e.g. in rectangular toround transformers, chute work, liners.FB1.5 BIFURCATE Pipe & cone planar bifurcate Bulk Material storage bin hoppers Tank Roofs Flagpoles Flanges,flange segments, discs Any right circular conical structure with multiplestrakes of varying thicknessFS1.6 PIPE-RUN Reticulated pipelines Hydro Electric Power Pipe runsFB1.7 PBRANCH S Structural connections Petrochemical - pipework branchesPressure Vessel manufacture - shell and nozzlesStructural joints (e.g. oil rig jacket)FB1.8 PBRANCH I & O Pipe Branches both Set In and Set On As for aboveFB1.9 CONE Multi segment Bulk Material storage bin hoppers, Tank Roofs, Flagpoles,WindTowers, Flanges, flange segments, discs - Any right circularconical structure with multiple strakes of varying thicknessFB1.10 LOBSTER Tapered lobsterback Bulk Materials Handling - chutesFluids Conveying - gored (lobsterback) pipe bends, vents.FS1.1 RECTIRCLE Multi shaped/strake transformation Bulk Materials Handling - hoppers and chutes. Fluids Conveying -ducts, transitions, - transformers, hoods, shrouds. `Industrial strength'structures - thick plate.FS2.2 BEND Transforming Bend As above FS2.3 CBRANCH Conical Branches Fluids Conveying - branched takeoffs - conical and circular transitionsNozzles in tank roofs or hoppers. FS2.4 BIFURCATE Pipe & cone planar bifurcate Fluids conveying, generally. FS2.5 PENSTOCK Tapered bent pipes Hydro-electric penstocks Generalized tubes and bends, circular cross-sectionsFS2.6 SURFACE Coverts 3D dxf to flat plate w/pressmarking Hull development in ship building is an example but really any complex surface development that needs to be developed from flat plateFP1.1 SPROCKET Chain Sprockets Roller Chain Power Transmission generally. Drag Chain Conveyordrives Bucket Elevator drives FP1.2 RANDP Rack and Pinion Spur Geared Power Transmission Linear (Rack and Pinion) drives(e.g. conveyor shuttles) FP1.3 INVINT Involute Gears Spur Geared Power Transmission Tilting Equipment Drives (e.g.Ladles) (Often used as `rack' with pinion from RandP) FP1.4 SPROCKET Plus Universal sprocket As for Sprocket FSS FastSHAPES® System for Plate Complete Price for all of the above $5,000.00FSSL FastSHAPES® SiteLicense CALLShape Development Hand Cutting – Eliminates the need for calculationsTIB Tradesman in aBox™ (Shape) Layout & Fabrication Software for ShopFloor Operation. Prints co ordinates and/orrs great value!templates. OffeIdeal for hand cutting or optical patternproduction without requiring expertboilermaking skills.$695.00Tubular and Pipe Heavy Fabrication Development Systems NC – Eliminates the need for calculationsFF FastFRAME® Pipe and tubular profiling templates For complex space frame development $17,500.00 FBM1 FastBEAM™Simple fast way to program beamlines. NC for Beam line drills - Wagner,Peddinghaus, Ficep. Call for others.$19,500.00 FP FastPIPE™Profiling pipe ends and penetrations (up to 3 axis) Pipe processing, Pipe to Pipe, Reticulation $5,000.00 FPPlus Profiling pipe ends and penetrFastPIPE™ Plus ations (3-6 axis) Wrap arounds plus NC programs CALLAll Prices are in US DollarsPlate and Remnant Management System - Manage all of your plate stock.FC1.11 FastTRACK®Track remnant plate with graphic display,automatic calculations of Area, Weight, Cost etc. Stores parts with mill number, supplier etc Ideal for service centers and stockreconciliation needs. FastCAM NC with nesting not required but recommended.$1,995.00NC Digitization - Cost effective option to large scale vectorizationFC1.12 FastCOPY®Easily digitize all your required processes into the one program, Marking, Centre Punch / Pop Mark, and all cutting processes. High quality cut. Where you have a need to convert oldtemplates or have a regular need to digitize actual parts. Optical ÎNC$1,995.00FC1.13FastCOPY® Complete * USA onlyIncluding 42" x 60" DigitizerPrices on application outside USAOptical ÎNCAs above with hardware$4,995.00FastCAM ® NC – Modules and UpgradesFC2.1.5 FastNEST ®Semi to Auto UPGRADEUpgrade from FastCAM Standard to FastCAM Professional. Fully automaticnesting. A fully automatic system.Multi plate, Multi Input Multi output, intelligent auto pathing$2,995.00 FCL2.1.5FastNEST ®Semi toAuto UPGRADE-LASERSpecific to Laser machines. Upgrade from FastCAM Standard to FastCAM Professional, Fully automatic nesting Multi plate, Multi Input Multi output, intelligent auto pathing $4,995.00FC1.10 FastNEST® Interactive For FastCAM NC users who want to add semi automatic nesting. The usermanually positions the parts on to the (single) plate. Handles arrays.$1,795.00 FC1.8 FastPATH ™ Automatic pathing of geometry & NC files. Produces smart NC code fast. Big timesaver on complex parts. Requires FastCAM NC.$695.00 FC1.9 FastTRAN ™ Where you have multiple cutting machines with different controllers. Universal CNCFile Translator Burny ÎLynx..etc$695.00 Txm TextMARKER ™ Marking / Identification on parts. Requires FastCAM v5+ release and appropriatemarking device or equipment fitted to machine.$495.00 DWG FastCAM ® AutoCAD ®DWG Import Import DWG files directly into your FastCAM System. No need for a separate CAD system just to read customer files. Requires FastCAM 5.5+ release. $495.00 CCP Common Cut Pairs Cut two geometry in a single pass. Requires FastCAM Professional v5.9. Pairs Only. $495.00 ADDLIC Additional Workstation License Add another license to your current edition / version of FastCAM system software. $1,250.00 FCT Training2 Day on site Training within USA only, inc travel & accommodation.Covers FastCAM and FastSHAPES and/or other programs as agreed prior. $2,650.00 FSERService and MaintenanceAnnual Software Maintenance/Upgrade Agreement for Twelve Months$900.00FastCAM ® - Standalone Productivity - Simple needs, simple solutionsFC1.3 FastCAM® FastCAM non-NC edition (drawing only) Drawing, DXF ÎDXF $495.00FC1.4 FastPLOT ™ NC Code verification only NC Î PLOT Costing$495.00 FC1.5 FastCUT® Optimizes material , prints graphic cutting lists and gives you basic costing information. Shear & Saw for plate and bar $495.00 FC1.5S FastCUT® Linear Optimize Linear components/parts only Shear/Saw processing for tube, bar etc $295.00 FC1.5A FastCUT® Labels Labeling program for FastCUT data files Identification of parts produced $195.00 FC1.1 FastLINK16 & 32 Bit DNC Lynx, Burny, Creonics, ESAB, etc $295.00 FC1.2 FastLINK ™ Plus Server Edition – DNC 32 bit Multi machine DNC $495.00 FC1.6 FastCUT CTLShear Cut to Length Lines Coil, Sheet, Bar, Tube….. $995.00 FCO FastCAM ®Outline Reads graphic files in various formats including BMP, TIFF, AWD. Converts data into DXF format suitable for processing via NC Machinery Ideal for converting non-dimensioned artwork into cutting files. Ornamental iron work, signs, machinery logos etc $395.00 Fgen FontGEN Turns True Type Fonts into DXF or CAM files for Cutting/Marking Ideal for Sign-making and Marking applications$295.00 KerfFastCAM ®KerfKerf compensates programs on PC instantly before downloading to the control Perfect for all Burny controls, to help speed up production$2,500.001. All Prices in this price list are subject to change without notice.2. Prices are software only and exclude hardware, shipping & installation unlessspecified. 3. Additional user licenses available for all products. Call for pricing. 4. FastCAM software is compatible with Windows 98, 2000/ME, NT, XP.。

A12018 PRICE LIST AND ORDER FORMS CLASS 1 METERS FOR REFINED PETROLEUM PRODUCTSEFFECTIVE JANUARY 1, 2018List Prices FCA Lake Bluff, IllinoisPrices are subject to change without noticeFor Customer Service In USA/Canada: 1-800-458-5262 | Fax: 847-295-1057For Customer Service Outside USA/Canada: 01-847-295-1050After Hours Emergency Service Number (USA/Canada Only): 1-800-458-5262ForPurchaseOrders:********************LC_PRICE_A1_V2:0118Effective January 1, 2018Prices Subject to Change Without Notice2 Liquid Controls, LLC Class 1 M Series Meters for Refined FuelsOrdering Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3Model Number Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6Order Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7Base Model & Registration Pricing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Standard & Optional Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Class 1 MS Series Steel Case Meters for Refined FuelsOrdering Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Model Number Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Order Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Base Model & Registration Pricing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Standard & Optional Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26LCR-II Software Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28LCR 600 Software Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Terms & Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30TABLE OF CONTENTSEffective January 1, 2018Prices Subject to Change Without NoticeFor Customer Service Inside the USA/Canada: 1-800-458-5262, Outside the USA/Canada: 01-847-295-1050 3 CLASS 1 M SERIES REFINED FUELSORDERING GUIDEORDERING GUIDE for Class 1 M Series MetersCLASS 1 M SERIES REFINED FUELSNOTE: To ensure proper systems selection, be sure to identify Temperature, Viscosity Range, Required Flow Rate, and System Pressure before proceeding.STEP 1: Select Meter Size Based on Pressure and Flow Rate of Class 1 Fluid*Higher pressure available without accessories.Effective January 1, 2018Prices Subject to Change Without Notice4 Liquid Controls, LLC STEP 2:Select Electronic or Mechanical RegistrationSTEP 3: Select Accessory Package Based on Electronic or Mechanical RegistrationCLASS 1 M SERIES REFINED FUELSORDERING GUIDEA Meter + RegisterB Meter + Register + StrainerC Meter + Register + Strainer + Air Eliminator E Meter + Register + PrinterF Meter + Register + Strainer + PrinterG Meter + Register + Strainer + Air Eliminator + Printer I Meter + Register + Preset ValveJ Meter + Register + Strainer + Preset ValveK Meter + Register + Strainer + Air Eliminator + Preset Valve L Meter + Register + Preset Valve + PrinterM Meter + Register + Strainer + Printer + Preset ValveN Meter + Register + Strainer + Air Eliminator + Printer + Preset Valve P Meter Only (No Register or Gear Plate)SMeter Only POD (No Register)Effective January 1, 2018Prices Subject to Change Without NoticeFor Customer Service Inside the USA/Canada: 1-800-458-5262, Outside the USA/Canada: 01-847-295-1050 5 STEP 3: (Con’t ) Accessory Packages with Electronic RegistrationSTEP 3: (Con’t ) Accessory Packages with Mechanical RegistrationCLASS 1 M SERIES REFINED FUELSORDERING GUIDEMeterElectronic RegisterStrainer Air EliminatorPreset Valve PrinterKI JGEFCABPSNLMMeterCounterStrainerAir EliminatorPrinterPreset CounterPreset ValveMeter with PODEffective January 1, 2018Prices Subject to Change Without Notice6 Liquid Controls, LLCSTEP 5: Fill Out Model Number Matrix.STEP 6: Use page 7 to Complete the Order Form with the Standard Build.STEP 4:Select Additional Accessories CLASS 1 M SERIES REFINED FUELSMODEL NUMBER MATRIXIf Ø is chosen, this item will not show in part number.* LCR-II supplied as Class 1, Div 2 enclosure. If Class 1, Div 1 required, refer to adder in “L” price book.** I (Internal Pulser): Register is mounted directly on meter via counter adapter.*** E (External Pulser): Register is mounted remotely via POD pulser.Effective January 1, 2018Prices Subject to Change Without NoticeFor Customer Service Inside the USA/Canada: 1-800-458-5262, Outside the USA/Canada: 01-847-295-10507 CLASS 1 M SERIES REFINED FUELSORDER FORMApplication Fluid:Viscosity:Registration Units Of Measure:Flow Direction: ☐ Left To Right ☐ Right To Left Strainer Mesh Sizes: ☐ 20M ☐ 40M ☐ 80M Flange Material: ☐ Aluminum ☐ Steel*Software: SR________ SL________ ST________* For Electronic Registration only. See pages 28-29 for options.Effective January 1, 2018Prices Subject to Change Without Notice8 Liquid Controls, LLCCLASS 1 M SERIES REFINED FUELSBASE MODEL AND REGISTRATION PRICINGEffective January 1, 2018Prices Subject to Change Without NoticeFor Customer Service Inside the USA/Canada: 1-800-458-5262, Outside the USA/Canada: 01-847-295-10509 CLASS 1 M SERIES REFINED FUELSBASE MODEL AND REGISTRATION PRICINGEffective January 1, 2018Prices Subject to Change Without Notice10 Liquid Controls, LLC CLASS 1 M SERIES REFINED FUELSBASE MODEL AND REGISTRATION PRICINGPrices for M60 with strainer or strainer/air eliminator include 4” RF flanges and inlet / outlet low. For 6”, add the 6” strainer option and the 6” RF flange option.*Preset versions of the mechanical M60 meters include a mechanical preset. A microswitch must be chosen at an added charge and a valve must be supplied separately.Effective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 M SERIES REFINED FUELSSTANDARD & OPTIONAL ACCESSORIESIf Ø is chosen, this item will not show in part number.● Standard OptionalEffective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 M SERIES REFINED FUELSSTANDARD & OPTIONAL ACCESSORIES● StandardOptional*For Refined Fuel truck applications with Mechanical Air Elimination, a Guide Rod is recommended.** Not for use with lube oils or viscous product.Effective January 1, 2018Prices Subject to Change Without Notice● Standard OptionalCLASS 1 M SERIES REFINED FUELSSTANDARD & OPTIONAL ACCESSORIES*Recommended for Refined Fuels**Recommended for Lube Oils or High Flow Rate ApplicationsEffective January 1, 2018Prices Subject to Change Without NoticeFlanges are available in Aluminum (A) or Steel (S) for M5 through M40 meters, or Aluminum Only for M60 meters.CLASS 1 M SERIES REFINED FUELSSTANDARD & OPTIONAL ACCESSORIES● Standard OptionalEffective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 M SERIES REFINED FUELSSTANDARD & OPTIONAL ACCESSORIES● Standard OptionalEffective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 M SERIES REFINED FUELSSTANDARD & OPTIONAL ACCESSORIES*Only for 5-digit preset. Others listed are available only with 4-digit presets.Counter extension length may be limited based on accessory package chosen. Consult factory for confirmation.● Standard OptionalEffective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 MS SERIES REFINED FUELSORDERING GUIDEORDERING GUIDE for Class 1 MS Series MetersCLASS 1 MS SERIES REFINED FUELSNOTE: To ensure proper systems selection, be sure to identify Temperature, Viscosity Range, Required Flow Rate, and System Pressure before proceeding.STEP 1: Select Meter Size Based on Pressure and Flow Rate of Class 1 Fluid*Higher pressure available without accessories.Effective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 MS SERIES REFINED FUELSORDERING GUIDESTEP 2: Select Electronic or Mechanical RegistrationSTEP 3: Select Accessory Package Based on Electronic or Mechanical RegistrationA Meter + RegisterB Meter + Register + StrainerC Meter + Register + Strainer + Air Eliminator E Meter + Register + PrinterF Meter + Register + Strainer + PrinterG Meter + Register + Strainer + Air Eliminator + Printer I Meter + Register + PresetJ Meter + Register + Strainer + PresetK Meter + Register + Strainer + Air Eliminator + Preset L Meter + Register + Preset + PrinterM Meter + Register + Strainer + Printer + PresetN Meter + Register + Strainer + Air Eliminator + Printer + Preset P Meter Only (No Register or Gear Plate)SMeter Only POD (No Register)Effective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 MS SERIES REFINED FUELSORDERING GUIDESTEP 3: (Con’t ) Accessory Packages with Electronic RegistrationSTEP 3: (Con’t ) Accessory Packages with Mechanical RegistrationMeterElectronic RegisterStrainer Air EliminatorPrinterGE FCABP SMeter CounterStrainer Air EliminatorPrinterPreset CounterMeter with PODEffective January 1, 2018Prices Subject to Change Without NoticeSTEP 5: Fill Out Model Number MatrixSTEP 6: Use page 21 to Complete the order form with the Standard Build.STEP 4: Select Additional AccessoriesCLASS 1 MS SERIES REFINED FUELSMODEL NUMBER MATRIXIf Ø is chosen, this item will not show in part number.* LCR-II supplied as Class 1, Div 2 enclosure. If Class 1, Div 1 required, refer to adder in “L” price book.** I (Internal Pulser): Register is mounted directly on meter via counter adapter.*** E (External Pulser): Register is mounted remotely via POD pulser.Effective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 MS SERIES REFINED FUELSORDER FORMDistributor Name:Date:Application Fluid:Viscosity:Registration Units Of Measure:Flow Direction: ☐ Left To Right ☐ Right To LeftStrainer Mesh Sizes: ☐ 20M ☐ 40M ☐ 80M *Software: SR________ SL________ ST________* For Electronic Registration only. See pages 28-29 for options.Effective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 MS SERIES REFINED FUELSBASE MODEL AND REGISTRATION PRICINGCLASS 1 MS SERIES REFINED FUELSEffective January 1, 2018BASE MODEL AND REGISTRATION PRICINGPrices Subject to Change Without NoticeEffective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 MS SERIES REFINED FUELSBASE MODEL AND REGISTRATION PRICINGEffective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 MS SERIES REFINED FUELSBASE MODEL AND REGISTRATION PRICINGEffective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 MS SERIES REFINED FUELSSTANDARD & OPTIONAL ACCESSORIESIf Ø is chosen, this item will not show in part number.● StandardOptionalBe sure to choose Microswitch.Effective January 1, 2018Prices Subject to Change Without NoticeCLASS 1 MS SERIES REFINED FUELSSTANDARD & OPTIONAL ACCESSORIES● StandardOptionalCounter extension length may be limited based on accessory package chosen. Consult factory for confirmation.Effective January 1, 2018Prices Subject to Change Without NoticeSOFTWARE OPTIONSLECTROCOUNT LCR-IILECTROCOUNT LCR -II FIRMWARE, LANGUAGE AND TICKET SOFTWARE Software for LCR-II must be specified in the Purchase Order.Effective January 1, 2018Prices Subject to Change Without NoticeSOFTWARE OPTIONSLECTROCOUNT LCR 600DELIVERY SCREENEach LCR600 is set with a default delivery screen at the factory. Please select a delivery screen when ordering, butremember the delivery screen can be changed in the field. The default options are:Volume and PresetDetailed POS POS Upgrade onlyPump and Print (Standard)SOFTWARE PART NUMBERING SYSTEMSoftware for LCR 600 must be specified in the Purchase Order.LECTROCOUNT LCR 600 FIRMWARE, LANGUAGE AND TICKET SOFTWAREEffective January 1, 2018Prices Subject to Change Without Notice STANDARD TERMS AND CONDITIONS APPLYING TOALL LIQUID CONTROLS METERS AND ACCESSORIESDistributor Discount ScheduleRefer to your Sales Agreement for the appropriate Discount Schedule for parts CLASS A.PrintsCertified dimensional prints will be supplied when specified on purchase order. One (1) per meter assembly. Additional prints will be supplied as requested.ManualsSets of parts lists, installation, operation, maintenance and repair manual will be supplied when specified on purchase order, one (1) per meter assembly. Additional manuals will be supplied at cost.PalletizingWith shrink wrap: $100 per palletWith banding: $100 per palletMinimum OrderMinimum charge per order is $250 net.Special TestsNet / Unit USD1. Master/reference meter proving, including certified test report and accuracy curves:$5002. Testing/calibration of meter based on special operating characteristics:$500Example: test repeatability at two points• All special testing of meters will be performed on solvent (1.4 cps)• For packaging other than standard commercial, consult factory.Field ServicesWarranty – LC offers technical advising services for select product lines during product installation and start-up to ensure a seamless commencement of operations.Non-Warranty – Technical staff is available to provide on-site field service to assist customers. Charges for the above work are $100 per hour or $800 per day, plus transportation, lodging and meals. A purchase order must be issued authorizing the work before a service technician is assigned.Return GoodsNo return goods will be accepted unless pre-approved and clearly display a factory assigned RMA number and an MSDS sheet if requiredNon-Warranty Product Evaluation and RepairNon-warranty product will be reviewed at LC upon receipt subject to an evaluation fee of $100. This fee will be applied to any subsequent product repair work authorized by the customer. A purchase order must be issued authorizing the work.Rapid Delivery System / Breakdown SituationIf a distributor requires “Rapid Delivery Service” (RDS) of standard meters, or RUSH of standard parts, an expediting fee applies (10% of net price or $250, whichever is greater). This fee will be added if LC ships the meter within five (5) or the parts within three (3) working days after acknowledged receipt of order (order entered into LC computerized production/ inventory system).TagsSpecial marking on existing tag available upon request, $100 per tag.TERMS & CONDITIONSEffective January 1, 2018Prices Subject to Change Without Notice For Customer Service Inside the USA/Canada: 1-800-458-5262, Outside the USA/Canada: 01-847-295-105031Warranty The Seller’s products are warranted against defects in material or workmanship for a period of one (1) year from date of installation, provided that the warranty shall not extend beyond twenty-four (24) months from the date of original shipment from Seller. Seller’s obligations, as set forth below, shall apply only to failure(s) to meet the foregoing obligations provided that Seller is given written notice within thirty (30) days of any occurrence from which a claim of defect arises. If a warranty dispute occurs, the Purchaser shall be required to provide Seller with proof of date of sale. The minimum requirement to establish date of sale shall be a copy of the Seller’s invoice. In the event that a factory inspection by Seller or its designee(s) supports the validity of a claim at the discretion of Seller, repair, replacement or refund shall be the sole remedy for defect and shall be made, free of charge, ex works factory. In no event shall Seller be liable for any special, consequential, incidental, indirect or exemplary damages arising out of warranty, contract, tort (including negligence) or otherwise, including but not limited to, loss of profit or revenue, loss of use of the product or any associated products and/or equipment, cost of substitute goods or services, downtime costs or claims of or by Purchaser’s clients or customers. In any event the total liability of Seller for any and all claims arising out of or resulting from the performance, non-performance or use of the product shall not exceed the purchase price of the individual product giving rise to the claim. All other guaranties, warranties, conditions and representations, either express or implied, whether arising under any statute, common law, commercial usage or otherwise are excluded. Electronic products require installation, start-up and servicing by local factory-trained service representatives. In the absence of installation, start-up and servicing of electronic products by Seller trained service representatives, this warranty is null and void. Seller’s obligations as set forth above shall not apply to any product, or any component or part thereof, which is not properly installed, used, maintained or repaired, or which is modified other than pursuant to Seller’s instructions or approval. NOTE: The above warranty applies only to products manufactured by, Liquid Controls, LLC. Lake Bluff, Illinois. Private label, OEM, and/or products manufactured by, Liquid Controls, LLC‘s licensee(s) are specifically excluded from the above warranty. Consult factory for all non-Liquid Controls, LLC manufacturer’s warranties. NO IMPLIED OR STATUTORY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL APPLY.TERMS & CONDITIONSAcceptance of Orders All orders for sales of products and all prices, terms, credits and conditions of shipment shall be subject to the acceptance and approval of Liquid Controls, Lake Bluff, Illinois.• Should you need a part not shown in this price list, contact the factory for the price and availability.• For packaging other than standard commercial, consult factory.L I Q U I D C O N T R O L S© 2018 Liquid ControlsLC_PRICE_A1_V2:0118Effective January 1, 2018Prices Subject to Change Without Notice105 Albrecht DriveLake Bluff, IL 60044-2242Inside the USA/Canada: 1-800-458-5262Outside the USA/Canada: 01-847-295-1050Fax: 847-295-1057。

报价函英文信范文Greetings,I hope this letter finds you well. I am writing to provide you with a price quotation for the products and services that your company has expressed interest in. As a leading provider in our industry, we are confident that we can offer you a competitive and comprehensive solution to meet your needs.First and forewell, let me introduce our company. We are a well-established enterprise with over 20 years of experience in the field. Our team of highly skilled professionals is dedicated to delivering exceptional quality and customer service. We pride ourselves on our ability to tailor our offerings to the unique requirements of each client, ensuring that you receive a tailored solution that aligns with your business objectives.Now, let me provide you with the details of our price quotation. We have carefully evaluated your requirements and have put together a comprehensive package that we believe will meet your needs.Product A:Quantity: 500 unitsUnit Price: $10.00Total Price: $5,000.00Product B:Quantity: 250 unitsUnit Price: $15.00Total Price: $3,750.00Product C:Quantity: 100 unitsUnit Price: $20.00Total Price: $2,000.00Service A:Description: Installation and setup Hourly Rate: $50.00Estimated Hours: 20Total Price: $1,000.00Service B:Description: Maintenance and support Monthly Fee: $500.00Estimated Duration: 12 monthsTotal Price: $6,000.00Total Quotation:$17,750.00Please note that the prices quoted above are valid for 30 days from the date of this letter. After this period, we reserve the right to adjust the prices to reflect any changes in market conditions or our costs.In addition to the products and services outlined above, we also offer a range of complementary offerings that may be of interest to your company. These include:- Extended warranty coverage- Customized training and support- Bulk purchasing discounts- Flexible payment termsIf you would like to explore any of these additional options, please do not hesitate to let me know, and I will be happy to provide you with more information.We understand that price is an important factor in your decision-making process, but we also believe that the quality of our productsand the level of service we provide are equally crucial. Our team is committed to ensuring that you receive the best possible value for your investment, and we are confident that our offering will exceed your expectations.If you have any questions or require any further information, please do not hesitate to contact me. I would be more than happy to discuss the details of this quotation with you in further detail.Thank you for considering our company, and we look forward to the opportunity to work with you.Best regards,[Your Name][Your Title][Your Company]。

报价信的英文模板[Your Name][Your Address][City, State, Zip Code][Email Address][Phone Number][Date][Client's Name][Client's Position/Title][Company Name][Company Address][City, State, Zip Code]Dear [Client's Name],RE: PRICE QUOTE FOR [PRODUCT/SERVICE]I hope this letter finds you well. Thank you for considering our company as your potential supplier for [product/service]. We appreciate the opportunity to provide you with a price quote for your project needs.Based on your requirements and specifications, we have calculated the following price quote for the requested [product/service]:1. [Item/Service Description]:- Unit Price: [Price per unit]- Quantity: [Number of units required]- Total Price: [Total cost]2. [Item/Service Description]:- Unit Price: [Price per unit]- Quantity: [Number of units required]- Total Price: [Total cost]3. [Item/Service Description]:- Unit Price: [Price per unit]- Quantity: [Number of units required]- Total Price: [Total cost]Please note that the prices provided above are exclusive of any applicable taxes or shipping charges. If there are any additional fees associated with your order, we will notify you beforehand.We strive to provide competitive and fair pricing. However, if you have any specific budget constraints or additional requirements, please let us know, and we will do our best to accommodate your needs.Should you have any questions or require further clarification on the quote or any other aspect of our product/service, please feel free to contact me directly at [Your Phone Number] or [Your Email Address]. I am readily available to assist you and address any concerns you may have.Thank you for considering our proposal. We look forward to the opportunity to work with you and provide exceptionalproducts/services to meet your needs. We are confident that our offering will meet your expectations and deliver value to yourorganization. Yours sincerely, [Your Name] [Your Position/Title] [Company Name]。