Eaton 198588Eaton Moeller® series Rapid Link - Speed controller, 8.5 A, 4 kW, Sensor input 4, 230/277 V AC, AS-Interface®, S-7.4 for 31 modules, HAN Q5, with manual override switch, with braking resistance, with fanGeneral specificationsEaton Moeller® series Rapid Link Speed controller198588RASP5-8402A31-512R101S14015081964635195 mm 270 mm 220 mm 3.78 kgRoHS CEIEC/EN 61800-5-1 UL approval UL 61800-5-1Product NameCatalog NumberModel CodeEANProduct Length/Depth Product Height Product Width Product Weight Certifications Catalog Notes 3 fixed speeds and 1 potentiometer speedcan be switched over from U/f to480 V Is the panel builder's responsibility. The specifications for the switchgear must be observed.480 V AC, 3-phase 400 V AC, 3-phaseMeets the product standard's requirements.4 kW500 VMeets the product standard's requirements.-40 °C380 V Fan PC connection Key switch position AUTO Braking resistance Control unit Breaking resistance Key switch position OFF/RESET Selector switch (Positions: REV - OFF - FWD) Internal DC link PTC thermistor monitoring IGBT inverterManual override switch Key switch position HANDTwo sensor inputs through M12 sockets (max. 150 mA) for quick stop and interlocked manual operation Thermo-click with safe isolation Mains voltage - max 10.11 Short-circuit rating Rated operational voltage 10.4 Clearances and creepage distances Output at quadratic load at rated output voltage - max Output voltage - max 10.2.3.1 Verification of thermal stability of enclosures Ambient storage temperature - min Mains voltage - min Fitted with:Output frequency - min control Connection of supply voltagevia adaptercable on round or flexiblebusbar junctionDiagnostics andreset on deviceand via AS-Interfaceintegrated PTC thermistor monitoring andThermoclick withsafe isolationoptional: 4 sensor inputs with M12-Yadapter for switchover to creep speedoptional: Fasterstop if external24 V fails Two sensor inputs through M12 sockets (max. 150 mA)for quick stop and interlocked manualoperationwith AUTO -OFF/RESET - HAND keyswitcheswith selectorswitch REV - OFF - FWD200 %, IH, max. starting current (High Overload), For 2 seconds every 20 seconds, Power section10 kA40 °CAS-Interface5 HP500 Hz8 kHz, 4 - 32 kHz adjustable, fPWM, Power section, Main circuitInternal, temperature-controlled FanDiagnostics and reset on device and via AS-Interface Parameterization: FieldbusParameterization: drivesConnect mobile (App) Parameterization: KeypadParameterization: drivesConnect-10 °C≤ 0.6 A (max. 6 A for 120 ms), Actuator for external motor brakeDoes not apply, since the entire switchgear needs to be evaluated.8.5 ADoes not apply, since the entire switchgear needs to be evaluated.Connecting drives to generator suppliesGeneration change RAMO4 to RAMO5Generation change from RA-SP to RASP 4.0Generation change from RA-MO to RAMO 4.0Configuration to Rockwell PLC for Rapid LinkGeneration Change RASP4 to RASP5Generation Change RA-SP to RASP5Electromagnetic compatibility (EMC)Rapid Link 5 - brochureDA-SW-drivesConnect - installation helpDA-SW-drivesConnect USB Driver DX-COM-PCKITDA-SW-drivesConnectDA-SW-USB Driver PC Cable DX-CBL-PC-1M5DA-SW-Driver DX-CBL-PC-3M0DA-SW-USB Driver DX-COM-STICK3-KITDA-SW-drivesConnect - InstallationshilfeMaterial handling applications - airports, warehouses and intra-logisticsProduct Range Catalog Drives Engineering-ENProduct Range Catalog Drives EngineeringDA-DC-00004508.pdfDA-DC-00004514.pdfDA-DC-00004184.pdfDA-DC-00003964.pdfeaton-bus-adapter-rapidlink-speed-controller-dimensions-004.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-003.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-005.eps eaton-bus-adapter-rapidlink-speed-controller-dimensions-002.epsETN.RASP5-8402A31-512R101S1.edzIL034085ZUStarting current - maxRated conditional short-circuit current (Iq)Ambient operating temperature - maxCommunication interfaceAssigned motor power at 115/120 V, 60 Hz, 1-phase Output frequency - maxSwitching frequencyFeaturesAmbient operating temperature - minBraking currentNumber of HW-interfaces (serial TTY)10.6 Incorporation of switching devices and components Nominal output current I2N10.2.6 Mechanical impact10.3 Degree of protection of assemblies Application notes BrochuresCatalogs Certification reports DrawingseCAD model Installation instructionsevaluated.Speed controllerC2, C3: depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.C1: for conducted emissions only0 W230/277 V AC (external brake 50/60 Hz)24 V DC (-15 %/+20 %, external via AS-Interface® plug)5 HP120 %AS-Interface profile cable: S-7.4 for 31 modulesASIIs the panel builder's responsibility.IIINEMA 12IP6570 °C2000 VPlug type: HAN Q5For 60 s every 600 sAt 40 °C Rapid Link 5MZ040046_EN MN034004EN MN040003_ENrasp5_v22.stp ramo5_v22.dwgProduct categoryRadio interference classHeat dissipation capacity PdissRated control voltage (Uc)Assigned motor power at 460/480 V, 60 Hz, 3-phase Number of HW-interfaces (RS-422)Mains current distortionProtocol10.9.2 Power-frequency electric strength Overvoltage categoryDegree of protectionAmbient storage temperature - maxRated impulse withstand voltage (Uimp) ConnectionOverload current Installation videos Manuals and user guidesmCAD modelFunctionsBrake chopper with braking resistance for dynamic brakingFor actuation of motors with mechanical brake3 fixed speeds1 potentiometer speed4-quadrant operation possibleOutput at linear load at rated output voltage - max4 kWMains voltage tolerance380 - 480 V (-10 %/+10 %, at 50/60 Hz)Leakage current at ground IPE - max3.5 mAConverter typeU converter10.2.2 Corrosion resistanceMeets the product standard's requirements.Supply frequency50/60 Hz10.2.4 Resistance to ultra-violet (UV) radiationMeets the product standard's requirements.10.2.7 InscriptionsMeets the product standard's requirements.Shock resistance15 g, Mechanical, According to IEC/EN 60068-2-27, 11 ms, Half-sinusoidal shock 11 ms, 1000 shocks per shaftApplication in domestic and commercial area permittedYesNumber of inputs (analog)Number of phases (output)310.12 Electromagnetic compatibilityIs the panel builder's responsibility. The specifications for the switchgear must be observed.10.2.5 LiftingDoes not apply, since the entire switchgear needs to be evaluated.Number of HW-interfaces (RS-485)Number of HW-interfaces (industrial ethernet)Efficiency98 % (η)System configuration typeAC voltagePhase-earthed AC supply systems are not permitted.Center-point earthed star network (TN-S network)10.8 Connections for external conductorsIs the panel builder's responsibility.Switch-on threshold for the braking transistor765 VDCProtectionFinger and back-of-hand proof, Protection against direct contact (BGV A3, VBG4)Braking voltage230/277 V AC -15 % / +10 %, Actuator for external motor brakeApplication in industrial area permittedYesClimatic proofingIn accordance with IEC/EN 50178< 95 %, no condensation10.9.3 Impulse withstand voltageIs the panel builder's responsibility.Overload current IL at 150% overload12.7 AInput current ILN at 150% overload7.8 ANumber of HW-interfaces (RS-232)Number of inputs (digital)4Current limitationAdjustable, motor, main circuit0.8 - 8.5 A, motor, main circuitCable lengthC3 ≤ 25 m, maximum motor cable lengthC1 ≤ 1 m, maximum motor cable length≤ 5 m, maximum motor cable length10.5 Protection against electric shockDoes not apply, since the entire switchgear needs to be evaluated.Mounting positionVerticalMains switch-on frequencyMaximum of one time every 60 seconds10.13 Mechanical functionThe device meets the requirements, provided the information in the instruction leaflet (IL) is observed.10.9.4 Testing of enclosures made of insulating materialIs the panel builder's responsibility.Heat dissipation per pole, current-dependent Pvid0 WElectromagnetic compatibility1st and 2nd environments (according to EN 61800-3)Resolution0.1 Hz (Frequency resolution, setpoint value)Assigned motor power at 460/480 V, 60 Hz5 HPRelative symmetric net voltage tolerance10 %Rated operational current (Ie)8.5 A at 150% overload (at an operating frequency of 8 kHz and an ambient air temperature of +40 °C)Number of outputs (analog)Rated operational power at 380/400 V, 50 Hz, 3-phase4 kWNumber of HW-interfaces (USB)Operating modeU/f controlSensorless vector control (SLV)PM and LSPM motorsSynchronous reluctance motorsBLDC motorsRated frequency - min45 HzDelay time< 10 ms, Off-delay< 10 ms, On-delayNumber of outputs (digital)Power consumption95 W10.2.3.2 Verification of resistance of insulating materials to normal heatMeets the product standard's requirements.10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effectsMeets the product standard's requirements.Number of HW-interfaces (other)1Rated frequency - max66 HzVibrationResistance: 57 Hz, Amplitude transition frequency on accelerationResistance: 10 - 150 Hz, Oscillation frequency Resistance: 6 Hz, Amplitude 0.15 mmResistance: According to IEC/EN 60068-2-6Short-circuit protection (external output circuits)Type 1 coordination via the power bus' feeder unit, Main circuit10.7 Internal electrical circuits and connectionsIs the panel builder's responsibility.Braking torqueAdjustable to 100 % (I/Ie), DC - Main circuit≤ 30 % (I/Ie)Relative symmetric net frequency tolerance10 %10.10 Temperature riseThe panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.Number of HW-interfaces (parallel)Eaton Corporation plc Eaton House30 Pembroke Road Dublin 4, Ireland © 2023 Eaton. All Rights Reserved. Eaton is a registered trademark.All other trademarks areproperty of their respectiveowners./socialmedia5 HP Specification: S-7.4 (AS-Interface®)Number of slave addresses: 31 (AS-Interface®)Max. total power consumption from AS-Interface® power supply unit (30 V): 190 mA 351.6 W at 25% current and 0% speed 53.8 W at 25% current and 50% speed 60.9 W at 50% current and 0% speed 64 W at 50% current and 90% speed 65.4 W at 50% current and 50% speed 85.1 W at 100% current and 0% speed 94 W at 100% current and 50% speed 95.3 W at 100% current and 90% speed 0Above 1000 m with 1 % performance reduction per 100 m Max. 2000 mAssigned motor power at 230/240 V, 60 Hz, 1-phase InterfacesNumber of phases (input)Heat dissipation at current/speed Number of interfaces (PROFINET)Altitude。
