TPS2112APWG4中文资料

IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityLow Power /lpw Telephony /telephonyWirelessVideo&Imaging /videoWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments IncorporatedPACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)SN74LV174AD ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADBR ACTIVE SSOP DB162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADBRE4ACTIVE SSOP DB162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADBRG4ACTIVE SSOP DB162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADG4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADGVR ACTIVE TVSOP DGV162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADGVRE4ACTIVE TVSOP DGV162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADGVRG4ACTIVE TVSOP DGV162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ADRG4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ANSR ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174ANSRE4ACTIVE SO NS162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM SN74LV174ANSRG4ACTIVE SO NS162000TBD Call TI Call TISN74LV174APW ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174APWE4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174APWG4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174APWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174APWRE4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174APWRG4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174APWT ACTIVE TSSOP PW16250Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174APWTE4ACTIVE TSSOP PW16250Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN74LV174APWTG4ACTIVE TSSOP PW16250Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.1-Jun-2007LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan -The planned eco-friendly classification:Pb-Free (RoHS),Pb-Free (RoHS Exempt),or Green (RoHS &no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free (RoHS):TI's terms "Lead-Free"or "Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all 6substances,including the requirement that lead not exceed 0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Pb-Free (RoHS Exempt):This component has a RoHS exemption for either 1)lead-based flip-chip solder bumps used between the die and package,or 2)lead-based die adhesive used between the die and leadframe.The component is otherwise considered Pb-Free (RoHS compatible)as defined above.Green (RoHS &no Sb/Br):TI defines "Green"to mean Pb-Free (RoHS compatible),and free of Bromine (Br)and Antimony (Sb)based flame retardants (Br or Sb do not exceed 0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annualbasis.1-Jun-2007TAPE AND REELINFORMATIONPACKAGE MATERIALS INFORMATION19-May-2007DevicePackage Pins SiteReel Diameter (mm)Reel Width (mm)A0(mm)B0(mm)K0(mm)P1(mm)W (mm)Pin1Quadrant SN74LV174ADBR DB 16MLA 330168.2 6.6 2.51216Q1SN74LV174ADGVR DGV 16MLA 33012 6.8 4.0 1.6816Q1SN74LV174ADR D 16FMX 016 6.510.312.1216Q1SN74LV174ANSR NS 16MLA 330168.210.5 2.51216Q1SN74LV174APWRPW16MLA330127.05.61.6812Q1TAPE AND REEL BOX INFORMATIONDevice Package Pins Site Length (mm)Width (mm)Height (mm)SN74LV174ADBR DB 16MLA 342.9336.628.58SN74LV174ADGVR DGV 16MLA 338.1340.520.64SN74LV174ADR D 16FMX 342.9336.628.58SN74LV174ANSR NS 16MLA 342.9336.628.58SN74LV174APWRPW16MLA338.1340.520.6419-May-200719-May-2007IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries(TI)reserve the right to make corrections,modifications,enhancements, improvements,and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete.All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty.Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty.Except where mandated by government requirements,testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design.Customers are responsible for their products and applications using TI components.To minimize the risks associated with customer products and applications,customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license,either express or implied,is granted under any TI patent right,copyright,mask work right,or other TI intellectual property right relating to any combination,machine,or process in which TI products or services are rmation published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement e of such information may require a license from a third party under the patents or other intellectual property of the third party,or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties,conditions,limitations,and notices.Reproduction of this information with alteration is an unfair and deceptive business practice.TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.TI products are not authorized for use in safety-critical applications(such as life support)where a failure of the TI product would reasonably be expected to cause severe personal injury or death,unless officers of the parties have executed an agreement specifically governing such use.Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications,and acknowledge and agree that they are solely responsible for all legal,regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications,notwithstanding any applications-related information or support that may be provided by TI.Further,Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications.TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or"enhanced plastic."Only products designated by TI as military-grade meet military specifications.Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk,and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS16949requirements.Buyers acknowledge and agree that,if they use anynon-designated products in automotive applications,TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityRFID Telephony /telephonyLow Power /lpw Video&Imaging /videoWirelessWireless /wirelessMailing Address:Texas Instruments,Post Office Box655303,Dallas,Texas75265Copyright©2007,Texas Instruments Incorporated。

Heavy Duty Oiltight Selector Switch Units - 10250T/91000T or E34ASSEMBL Y INSTRUCTIONS1. Select the desired schematic circuit function from the chart below and note in your cam column the type of contacts, N.O. or N.C., the “A ” and “B” circuit locations, and any series or parallel jumper connections the may be required.2. Choose contact blocks that have the required schematic circuits and assemble in any convenient sequence that fulfills the “A ” and “B” circuit location requirements.NOTE: Single circuit contact blocks, if used, must be last in the stack and positioned so that the plunger motion is transmitted through.3. Make the indicated series or parallel jumper connections.(10250T/91000TA70,TA71).4. If this operator was received without an operating cap, assemble theseparately purchased cap, assemble the separately purchased cap and secure with the screws provided.NOTES: Single, double and 2NO-2NC contact blocks are available. Six contacts can be stacked in each of the two circuit locations making a maximum of twelve circuits possible.For additional selector switch explanation ask for manual NU-118.The two sections of the operating cam of this selector switch work independently, so it is important that the contact blocks be oriented with their plungers in the correct “A ” and “B” circuit locations. The sketch below identifies these positions with respect to the locatin nib or marked top.Sketch shows VERTICAL MOU NTING . For HORIZONTAL MOU NTING loosen the set screw and assemble so that the locating nib is at the left.ILLUMINATED GASKET INSTRUCTIONS This operator was shipped with the gasket oriented for VERTICAL MOUNTING using lever lens and the new type knob lens.For HORIZONTAL MOU NTING (or VERTICAL MOUNTING using the old type knob) carefully peel the lens gasket, rotate it 90°, and press onto the operator. (Lens screws will now thread into alternate holes).LAMB REMOVAL TOOL For T rans. T ype Cat. No. 10250TA74 for Full Voltage Type E30KV1.1. Drill mounting hole for vertical or horizontal mounting per one of the figures above.2. ensure sealing gasket is in the place on the operator. Align location nib of the operator with notch in the panel and insert operator through mount-ing hole.3. Place legend plate and mounting nut over operator. Tighten mounting nut. If applicable assemble buttons to operator. Tighten securely (5 ft-lbs) (6.8 Nm).4. Torque terminals to 12 in/lbs (1.4 Nm).For ease of assembly, we recommend the following tools:91000T/10250TA95 (for 10250T/91000T octagonal nut, E29 and E30 line) E22CW (for 10250T/91000T octagonal nuts, E22, E30 and E34)5. T orque contact block stacking screws to 5-7 in/lbs (0.57- 0.79 Nm)ASSEMBL Y INSTRUCTIONSUS 60/75°C COPPER CONDUCTORS ONL YLIGHT MODULE OF CONTACT BLOCKVertical MountingLeverNew KnobAllen Wrench Circuit “A ”Circuit “B”Slot Assemblynotch2 Position2Instructions and Operation P20442Effective February 2018Heavy Duty Oiltight Selector Switch SWITCH UNITS-10250T/91000T OR E34EATON CORPORATION GENERALWith any electrical component there is the possibility an external factor (loose wire, moisture, etc.) can cause a short circuit between the component and ground. If the device is adequately grounded, the condition causes the protective fuse or circuit breaker to open and remove the potential. If not, an electrical hazard may remain unnoticed.GROUNDING NIBS – 10250TThis 10250T device is designed to make direct metallic contact to the rear of the panel (with no interfere with component-to-panel ground continuity). As a further aid in establishing an electrical ground, the device has 4 metal points, “grounding nibs” designed to penetrate most paint or other protective coatings. Penetration of these nibs is dependent upon the torque applied to the mounting nut. Recommended torque is 5 ft.lbs (6.8Nm). More or less may be necessary to penetrate the specific type of thickness of your panel coating. Test for continuity to ground after installation. If a short circuit to ground does occur, the fault should be corrected and the device replaced.GROUNDING KITSFor grounding 10250T devices to non-metallic panels or metal panels having excessive surface coating or for grounding E34 with any panel we offer the following grounding kits which provide for a separate grounding circuit, daisy chained between components and then to ground. Use 10250TKG1.EARTH TERMINALS- 91000T/E34These devices are supplied with an earth/ground terminal incorporated. These devices have a 6-32 terminal screw and will accommodate ring type terminations for bonding to international specifications.CONTACT BLOCK SELECTION CHARTINSTRUCTIONS FOR THE ASSEMBL Y OF THE PADLOCK ATTACHMENT E34TA11, 10250T/91000TA11TIGHT SELECTOR SWITCH OPERATORS1. With the knob of the selector positioned per dimension “A ”, place the padlock attachment over the knob with the mounting screws located as shown in the illustration.2. Tighten the mounting screws alternately and uniformly to prevent the attachment from being assembled skewed.3. The outer lock ring can now be turned to any desired selector position. there are provisions for 5 padlocks.Dimension “A ”- For 2 or 3 position selector switch operators. Locate the knob half way between clockwise and center positions.GROUNDING OF 10250T/91000T AND E34COMPONENTSNibEarth Terminal3Instructions and Operation P20442Effective February 2018Heavy Duty Oiltight Selector Switch SWITCH UNITS-10250T/91000T OR E34EATON CORPORATION NOTE: The white-filled groove in the button indicates the roto-ring position. When the roto-ring is in the counterclockwise position the button position is normal and may be depressed independent of the roto-ring. Rotating the ring to the extreme clockwise position depresses and latches the button. The roto-ring has spring return action from any clockwise position except the latched position.INSTRU CTIONS FOR THE ASSEMBL Y OF HEAVY DUTY OILTIGHT ROTO-PUSHUNITSINSTRUCTIONSROTO-PUSH® LATCH OPERATOR ASSEMBL Y INSTRUCTIONSAPPLICA TION INSTRUCTIONS1-The cam code is stamped on the rear of the operator.2-Determine the number of operating positions of the operator by moving the roto-ring.3-Examine the contact block for its circuit arrangement.4-The chart shows the circuit operating sequence when moving the roto-ring from one position to another with the pushbutton depressed or normal.5-Assemble the contact block to operator with the circuit corresponding to “A ” in the chart mounted located behind the locating nib. T his is shown in the sketch on this publication.6-For additional explanation ask for manual NU-118.CAM AND CONTACT BLOCK SELECTION FOR 2 POSITION SWITCHGROUNDINGWHITE FILLED GROOVELATCH OPERATOR ONLYInstructions and Operation P20442 Effective February 2018Heavy Duty Oiltight Selector Switch Units - 10250T/91000T or E34Eaton Corporation Electrical Sector1111 Superior Avenue Cleveland, OH 44114United States877-ETN-CARE (877-386-2273)© 2011 Eaton Corporation All Rights Reserved Publication No. P20442 / 004 February 2018Eaton is a registered trademark of Eaton Corporation.All other trademarks are property of their respective owners.CAM AND CONTACT BLOCK SELECTION FOR 3 POSITION SWITCH■ Limited to 4 contact blocks.● N=Button in free or normal position.D =Button depressedC =Contacts closed。

mm)FEATURESAPPLICATIONSSTATD0D1IN1OUTIN2GNDPW PACKAGE(TOP VIEW)DESCRIPTIONTYPICAL APPLICATIONR LTPS2114TPS2115SLVS447A–DECEMBER2002–REVISED MARCH2004AUTOSWITCHING POWER MULTIPLEXER•Available in a TSSOP-8Package•Two-Input,One-Output Power MultiplexerWith Low r DS(on)Switches:•PCs–84mΩTyp(TPS2115)•PDAs–120mΩTyp(TPS2114)•Digital Cameras•Reverse and Cross-Conduction Blocking•Modems•Wide Operating Voltage Range:2.8V to5.5V•Cell phones•Low Standby Current:0.5µA Typical•Digital Radios•Low Operating Current:55µA Typical•MP3Players•Adjustable Current Limit•Controlled Output Voltage Transition Times,Limits Inrush Current and Minimizes OutputVoltage Hold-Up Capacitance•CMOS and TTL Compatible Control Inputs•Manual and Auto-Switching Operating Modes•Thermal ShutdownThe TPS211x family of power multiplexers enables seamless transition between two power supplies,such as a battery and a wall adapter,each operating at2.8-5.5V and delivering up to1A.The TPS211x family includes extensive protection circuitry,including user-programmable current limiting,thermal protection,inrush current control,seamless supply transition,cross-conduction blocking,and reverse-conduction blocking.These features greatly simplify designing power multiplexer applications.Please be aware that an important notice concerning availability,standard warranty,and use in critical applications of TexasInstruments semiconductor products and disclaimers thereto appears at the end of this data sheet.PACKAGE DISSIPATION RATINGSABSOLUTE MAXIMUM RATINGSTPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004These devices have limited built-in ESD protection.The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.AVAILABLE OPTIONSORDERING INFORMATION(1)The PW package is available taped and reeled.Add an R suffix to the device type (e.g.,TPS2114PWR)to indicate tape and reel.over operating free-air temperature range unless otherwise noted (1)(1)Stresses beyond those listed under "absolute maximum ratings"may cause permanent damage to the device.These are stress ratings only,and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions"is not implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.(2)All voltages are with respect to GND.RECOMMENDED OPERATING CONDITIONSELECTROSTATIC DISCHARGE(ESD)PROTECTION ELECTRICAL CHARACTERISTICSTPS2114TPS2115 SLVS447A–DECEMBER2002–REVISED MARCH2004over recommended operating junction temperature range,V=V=5.5V,R=400Ω(unless otherwise noted) (1)The TPS211x can switch a voltage as low as1.5V as long as there is a minimum of2.8V at one of the input power pins.In this specificcase,the lower supply voltge has no effect on the IN1and IN2switch on-resistances.ELECTRICAL CHARACTERISTICSTPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004over operating free-air temperature range (unless otherwise noted)(1)Not tested in production.TPS2114TPS2115 SLVS447A–DECEMBER2002–REVISED MARCH2004ELECTRICAL CHARACTERISTICS(continued)over operating free-air temperature range(unless otherwise noted)(2)Not tested in production.SWITCHING CHARACTERISTICSTRUTH TABLETPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004over recommended operating junction temperature range,V I(IN1)=V I(IN2)=5.5V,R (ILIM)=400Ω(unless otherwise noted)(1)Not tested in production.(1)The under-voltage lockout circuit causes the output OUT to go Hi-Z if the selected power supply does not exceed the IN1/IN2UVLO,or if neither of the supplies exceeds the internal V DD UVLO.FUNCTIONAL BLOCK DIAGRAMOUTILIMIN1IN2D0D1GNDTPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004Terminal FunctionsPARAMETER MEASUREMENT INFORMATION5 VSwitch #1 EnabledSwitch #2 Enabled DO-D1V O(OUT)V O(OUT)V O(OUT)(a)(b)TPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004Figure 1.Propagation Delays and Transition Timing WaveformsTYPICAL CHARACTERISTICSV I(DO)V I(D1)V O(OUT)t - Time - 1 ms/div2V/Div2V/Div2V/DivSTAT D0D1ILIMIN1OUT IN2GND12348765TPS2115PW0.1 µF0.1 µF50 Ω5 V3.3 V400 Ωf = 28 Hz 78% Duty CycleOutput Switchover Response Test CircuitOUTPUT SWITCHOVER RESPONSENC1µFt − Time − 2 ms/divV I(DO)V I(D1)V O(OUT)2V/Div2V/Div2V/DivSTAT D0D1ILIMIN1OUT IN2GND12348765TPS2115PW0.1 µF0.1 µF50 Ω5 V3.3 V400 Ωf = 28 Hz 78% Duty Cycle1µFOUTPUT TURNON RESPONSEOutput Turnon Response Test CircuitNCTPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004Figure 2.Figure 3.C L = 1 µFC L = 0 µFt - Time - 40 µs/divV I(DO)V I(D1)V O(OUT)2V/Div2V/Div2V/DivOutput Switchover Voltage Droop Test CircuitOUTPUT SWITCHOVER VOLTAGE DROOPSTAT D0D1ILIMIN1OUT IN2GND12348765TPS2115PW0.1 µF0.1 µF50 Ω400 Ω90% Duty Cycle5 VNC0 µFC LTPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004TYPICAL CHARACTERISTICS (continued)Figure 4.00.511.522.533.544.55- O u t p u t V o l t a g e D r o o p - VC L - Load Capacitance - µFOUTPUT SWITCHOVER VOLTAGE DROOPvsLOAD CAPACITANCEf = 28 Hz Output Switchover Voltage Droop Test CircuitO (O U T )∆V TPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004TYPICAL CHARACTERISTICS (continued)Figure 5.05010015020025030020406080100I n r u s h C u r r e n t - m AC L - Load Capacitance - µFINRUSH CURRENTvsLOAD CAPACITANCEf = 28 Hz 90% Duty CycleOutput Capacitor Inrush Current Test CircuitII-TPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004TYPICAL CHARACTERISTICS (continued)Figure 6.−50050100150T J − Junction Temperature − °C6080100120140160180− S w i t c h O n -R e s i s t a n c e − m Ωr D S (o n )23456V I(INx) − Supply Voltage − V80859095100105110115120− S w i t c h O n -R e s i s t a n c e − m Ωr D S (o n )23456V I(IN1) − Supply Voltage − VI (I N 1)− I N 1 S u p p l y C u r r e n t −AµI0.820.840.860.880.900.920.940.9623456I (I N 1)AµV I(IN1)− IN1 Supply Voltage − V I − I N 1 S u p p l y C u r r e n t −TPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004TYPICAL CHARACTERISTICS (continued)SWITCH ON-RESISTANCESWITCH ON-RESISTANCEvsvsJUNCTION TEMPERATURESUPPLY VOLTAGEFigure 7.Figure 8.IN1SUPPLY CURRENTIN1SUPPLY CURRENTvsvsSUPPLY VOLTAGESUPPLY VOLTAGEFigure 9.Figure 10.01020304050607080T J − Junction Temperature − °CI (I N x )S u p p l y C u r r e n t − −AµIT J − Junction Temperature − °CI (I N x )S u p p l y C u r r e n t − −AµI TPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004TYPICAL CHARACTERISTICS (continued)SUPPLY CURRENTSUPPLY CURRENTvsvsJUNCTION TEMPERATUREJUNCTION TEMPERATUREFigure 11.Figure 12.APPLICATION INFORMATIONR L IN1: 2.8 - 5.5 VIN2: 2.8 - 5.5 VR LTPS2114TPS2115SLVS447A–DECEMBER2002–REVISED MARCH2004The circuit in Figure13allows one or two battery packs to power a system.Two battery packs allow a longer run time.The TPS2114/5cycles between the battery packs until both packs are drained.Figure13.Running a System From Two Battery PacksIn Figure14,the multiplexer selects between two power supplies based upon the D1logic signal.OUT connects to IN1if D1is logic1,otherwise OUT connects to IN2.The logic thresholds for the D1terminal are compatible with both TTL and CMOS logic.Figure14.Manually Switching Power SourcesDETAILED DESCRIPTIONAUTO-SWITCHING MODEMANUAL SWITCHING MODEN-CHANNEL MOSFETsCROSS-CONDUCTION BLOCKINGREVERSE-CONDUCTION BLOCKINGCHARGE PUMPCURRENT LIMITINGOUTPUT VOLTAGE SLEW-RATE CONTROLTPS2114TPS2115SLVS447A–DECEMBER 2002–REVISED MARCH 2004D0equal to logic 1and D1equal to logic 0selects the auto-switching mode.In this mode,OUT connects to the higher of IN1and IN2.D0equal to logic 0selects the manual-switching mode.In this mode,OUT connects to IN1if D1is equal to logic 1,otherwise OUT connects to IN2.Two internal high-side power MOSFETs implement a single-pole double-throw (SPDT)switch.Digital logic selects the IN1switch,IN2switch,or no switch (Hi-Z state).The MOSFETs have no parallel diodes so output-to-input current cannot flow when the FET is off.An integrated comparator prevents turnon of a FET switch if the output voltage is greater than the input voltage.The switching circuitry ensures that both power switches never conduct at the same time.A comparator monitors the gate-to-source voltage of each power FET and allows a FET to turn on only if the gate-to-source voltage of the other FET is below the turnon threshold voltage.When the TPS211x switches from a higher-voltage supply to a lower-voltage supply,current can potentially flow back from the load capacitor into the lower-voltage supply.To minimize such reverse conduction,the TPS211x does not connect a supply to the output until the output voltage has fallen to within 100mV of the supply voltage.Once a supply has been connected to the output,it remains connected regardless of output voltage.The higher of supplies IN1and IN2powers the internal charge pump.The charge pump provides power to the current limit amplifier and allows the output FET gate voltage to be higher than the IN1and IN2supply voltages.A gate voltage that is higher than the source voltage is necessary to turn on the N-channel FET.A resistor R (ILIM)from ILIM to GND sets the current limit to 250/R (ILIM)and 500/R (ILIM)for the TPS2114and TPS2115,respectively.Setting resistor R (ILIM)equal to zero is not recommended as that disables current limiting.The TPS2114/5slews the output voltage at a slow rate when OUT switches to IN1or IN2from the Hi-Z state (see Truth Table ).A slow slew rate limits the inrush current into the load capacitor.High inrush currents can adversely effect the voltage bus and cause a system to hang up or reset.It can also cause reliability issues—like pit the connector power contacts,when hot plugging a load like a PCI card.The TPS2114/5slews the output voltage at a much faster rate when OUT switches between IN1and IN2.The fast rate minimizes the output voltage droop and reduces the output voltage hold-up capacitance requirement.IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. T o minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetwork Microcontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2004, Texas Instruments Incorporated。

3 Please read this instruction carefully before use.3 Switch off the power before wiring.3 The display panel of TP04 series is waterproof. But please prevent grease, corrosive liquids and sharp objects from contacting the TP04 series.3The TP04 series require 24VDC input power. DO NOT connect input AC power supply to any of the RS-485communication port; otherwise serious damage may occur. Check all the wiring again before switching on the power.3 DO NOT touch any terminal when the power is switched on. DO NOT touch any internal circuit in 1 minute after the power is switched off.3 Make sure the groud terminal is correctly grounded in order to prevent electromagnetic interference.3Please use the fixed support accessory which is packed together with the product provided by Delta. DO NOT tighten the screws out of the normal torque specifications; otherwise serious damage may occur.X Introduction1.1 Model ExplanationThank you for choosing Delta TP Series. TP04G-AS2 has the features of high resolution 128×64 dots and is able to display 8×4 Chinese character. It provides multilingual display and two built-in communication ports, one is for RS-232 / RS-422 and the other is for RS-485. RS-232 and RS-485 can be used simultaneously. Besides, it also supports built-in RTC, communication / alarm LED indicators. The user can purchase program copy card (optional) to copy settings and programs quickly and save download time. Regarding the editing software, there are various objects and images for the user’s requirements.Nameplate ExplanationProduction model Power input spec.Barcode and serial numberVersionNOTE: The words of “MADE IN XXXXX” will be different due to the manufacturing location. Please refer to the actual product for exact description.Model / Serial No. ExplanationTP 04G AS 2- RS-232/RS-422/RS-485 interface Reserved T: Text mode G: Graphic mode LCD Spec.Series nameTP04GAS 2W 6050004Production serial number Production weeks Production year (2006)Production plantVersionProduction model(W: Wuijang; T: Taoyuan)1.2 Product OutlinePANEL COMPONENTEXPLANATIONShift KeyIt is used to select function keys F0 ~ F9 and other keys for special function. Arrow KeysUP / Pg Up: It is used to increase the value or move up one page.Pg Dn / DOWN: It is used to decrease the value or move down one page.Left: This key is left direction key and it can be used to select the position of the value.Right: This key is right direction key and it can be used to select the position of the value.Enter KeyIt is used to input a value or accept a programming command.Function KeysF0 / F5: It is used to be constant 0 (F0) and 5 (Shift+F0) when it is in the systemmenu, the user can use it to define functions separately when they are in user page.F1 / F6: It is used to be constant 1 (F1) and 6 (Shift+F1) when it is in the systemmenu, the user can use it to define functions separately when they are in user page.F2 / F7: It is used to be constant 2 (F2) and 7 (Shift+F2) when it is in the systemmenu, the user can use it to define functions separately when they are in user page.F3 / F8: It is used to be constant 3 (F3) and 8 (Shift+F3) when it is in the systemmenu, the user can use it to define functions separately when they are in user page.F4 / F9: It is used to be constant 4 (F4) and 9 (Shift+F4) when it is in the systemmenu, the user can use it to define functions separately when they are in user page.1.4 Back Panel5 PIN terminal / Wire gauge: 12-24 AWG / Torque: 4.5 lb.-inch1.5 DimensionFront panel (unit: mm [inch])Right side diagram (unit: mm [inch])1.6 InstallationPlease insert TP04 series to the opening hole of panel and tighten the screws. However, if a firm mounting TP04 series to the panel is needed, please use the mounting fixed support accessory which is packed together with TP04 series, then insert the fixed support in the back and tighten the screws.If the fixed support is not installed well, Delta will not guarantee the waterproof function. The screw torque should be 4-5(kg-cm). DO NOT exceed this specification when tightening the screws; otherwise TP04 series may be damaged. Please leave sufficient space (more than 50mm) around the unit for heat dissipation.Do not install and mount TP04 series in the following environment.h A location subjected to Airborne dust, metallic particles, oil and smoke, corrosive or flammablegases and liquids. h A location where temperature and humidity will exceed specifications. h A location where vibration and shock will exceed specifications.Y Function SpecificationsITEMZ Electrical SpecificationsSpecificationsTP04G-AS2DisplayMonochromatic STN LCDEffective Display Area (W) x (H) = 72 x 40 (unit: mm); 3 inches Display Resolution 128×645×8 dots 25 characters × 8 rows 8×8 dots 16 characters × 8 rows8×12 dots 16 characters × 5 rows 8×16 dots 16 characters × 4 rowsLCD Contrast Adjustment Set by Software, adjust the contrast by the press button in the function tableLCD Backlight Type LED Backlight: Automatic Turn-off Setting Function / Numeric Keys F0 ~ F9, ESC, SHIFT, ENTERand Arrow KeysExternal Input Power24V (3.5W Max.)Terminal Panels Series !Instruction SheetWarningMemory Capacity 256K ByteCPU Hitachi HD64F3064F RAM of System 32K Byte Communication Interface COM1: RS-232 / RS422 COM2: RS-485 Waterproof Class of FrontPanelIP65 / NEMA4Operating Temperature forHardware0 ~ 50°C; 20 ~ 90﹪RH (non-condensing)Storage Temperature forHardware-20 ~ 60°CVibration5Hz ≦f ＜9Hz = Continuous: 1.75mm / Occasional: 3.5mm9Hz ≦f ≦150Hz = Continuous: 0.5g / Occasional: 1.0gShock15g peak, 11ms duration, half-sine, three shocks in each direction per axis,on 3 mutually perpendicular axes (total of 18 shocks)Radiated Emission CISPR11, Class A Electrostatic DischargeImmunity EN61000-4-2Radiated ImmunityEN61000-4-3 Electrical Fast Transient EN61000-4-4 Weight / Dimensions 0.24kg; 147×97×35.5mm (Width(W) × Height(H) × Deep(D))Cooling Method Natural Air Cooling[ Program Copy CardTP04 series provides Program Copy Card Function to copy user program, system function and passwords that is different from the copy program. It is used to copy the whole HMI environment settings and application programs to another HMI rapidly. Using Program Copy Card saves time and manpower. The operation is as follows.Definition: Program Copy Card → PCC, TP Series → TP(TP →PCC)(PCC →TP)Step 1 Turn the switch on the PCC to TP →PCC Turn the switch on the PCC to PCC →TP Step 2 Insert the PCC into the extension slot of TP Insert the PCC into the extension slot of TP Step 3 Input the power to TPInput the power to TPStep 4It will display “remove PCC” on the screen and power on again.It will display “remove PCC” on the screen and power on again.HMI Display Message(TP →PCC)(PCC →TP)Step 1If the TP model type does not correspond with themodel type of program of PCC, TP will display “TP series and PCC is different. Press Enter to Confirm TP series ÆPCC. Press Esc to Exit”. If there is no program in PCC, TP will display “The PCC is Empty. PCC →TP series is illegal”.Step 2 TP will display “TP →PCC series Please wait!” during transmission.TP will display “PCC →TP series Please wait!” during transmission.Step 3TP will display “Please Remove the PCC and Reboot” when transmission is completed.TP will display “Please Remove the PCC andReboot” when transmission is completed.\ Password FunctionIf the user forgot the password, the password can be cleared by using the following code: 8888. This universal code will clear the password and all TP04 series internal programs. The TP04 series will be reset to the factory settings by using this code also. Please pay close attention when using it.The password can be the alphabet from A to Z or the number from 0 to 9. But it must use the functionkeys F0 ~ F9 to input the password characters. Please refer to the following table. Function Key Use MethodFunction KeyUse MethodF0 / F5 Scrolls in a loop as follows0→5→A →B →C →D →E →F→0 F3 / F8 Scrolls in a loop as follows3→8→Q→R →S →T →U →V →3 F1 / F6 Scrolls in a loop as follows 1→6→G →H →I →J →K →1 F4 / F9Scrolls in a loop as follows 4→9→W →X →Y →Z →4 F2 / F7Scrolls in a loop as follows 2→7→L →M →N →O →P →2] Hardware OperationWhen the user wants to startup TP04 series, a 24VDC power is needed. After applying 24VDC power to TP04 series, it will enter into the startup display and then enter the user-designed program. Pressing Esc key and holding on for 5 seconds can return to system menu. There are five selections in the system menu and are described below.Download Program Use the connection cable (DVPACAB530) to connect the TP04 serialcommunication port RS-232 to a PC. Then use the TPEdit software to download an application program to TP04.Upload ProgramUse the connection cable (DVPACAB530) to connect the TP04 serialcommunication port RS-232 to a PC. Then use the TPEdit software to upload anapplication program from TP04.Copy ProgramTransfer a program between two TP04 units. 1: transmit programs 2: receive programsWhen transmit programs and data between two TP04 units. Set one TP04 to“Receive Program” mode and the other TP04 to “Transmit Program” mode. Please use twisted pair wires to connect the two units via the RS-485 ports. TP04 SettingsThere are 9 items that used to modify TP04 system settings:1. Communication protocol: Setting the address of TP04, the control port of PLC,and the communication string for either RS-232 or RS-485. 2. Contrast: Adjust the contrast of LCM display screen.3. Back-light: adjust the automatic turn off time of LCM. Setting range is 00 ~ 99minutes. If set to 00, the LCM Back-light will not turn off.4. Date and Time: It is used to set the TP04 built-in RTC including year, month,day, hour, minute, second and week. Also the internal battery capacity display is shown here.5. Buzzer: Used to set the buzzer sound, normal mode or quiet mode.6. Language Setting: Used to set the displayed language. English, TraditionalChinese, Simplified Chinese or user defined language.7. Password setting: Used to set, enable, and disable the password function. If thepassword function is enabled, it will require the user to input a password before entering any system menu. The factory password is 1234.8. Startup display: Used to select the TP04 startup display. User can select “userdefined” to use the file that designed by TPEdit and download to TP04.9. Comm. indicator: The user can determine if the RS-232 and RS-485 LEDs willblink or not during communication. PLC ConnectionThere are three methods to connect to PLC:1. Using TP04 serial communication port (COM1) RS-232: set 8-pin DIP switch toRS-485 mode and connect the cable (DVPACAB215 or DVPACAB230) to program communication I/O RS-232C of PLC.2. Using extension communication port (COM2): set 8-pin DIP switch to RS-485mode and connect 5-pin removal terminal of extension communication port to RS-485 of PLC with twisted pair.3. Using extension communication port (COM2): set 8-pin DIP switch to RS-422mode and connect four pins (6, 7, 8, 9) of 9 PIN D-SUB male to RS-422 of PLC with 4-wire cable.ExecutionExecute the internal program that download from TPEdit or transmitted from other TP04 units. When program is in execution, the user can return to system menu by pressing Escape / Exit (Esc) key for 5 seconds.^ Communication ConnectionTP04G may connect to a PC by using connection able DVPACAB515PC or TP02 / 04G 9 PIN D-SUB TO PC (RS-232)TO TP02 / 04G9 PIN D-SUBTP04G may connect to a DVP-PLC by using connection cable DVPACAB215 / DVPACAB230 /DVPACAB2A301. DVPACAB215 / DVPACAB230TO PC or TP02 / 04G2. DVPACAB2A30 TO PC or TP02 / 04G9 PIN D-SUBThe Pin definition of 9 PIN D-SUB1. RS-2322. RS-4223. DVPACAB630 (RS-422)TO TP02 / 04G9 PIN D-SUBSwitch between RS-422 / RS-485 (by using 8-PIN DIP switch)8-PIN DIP SwitchRS-485 RS-422 SW1 ~ SW4 On Off SW5 ~ SW8OffOn_ Battery Life and Precision of Calendar TimerBattery LifeTemperature (°C)-202060Life (Year) 1.972 2.466 2.712 2.835Precision of Calendar Timer1. At 0°C / 32°F, less than -117 seconds error per month.2. At 25°C / 77°F, less than 52 seconds error per month.3. At 55°C / 131°F, less than -132 seconds error per month.The content of this instruction sheet may be revised without prior notice. Please consult our distributors ordownload the most updated version at /industrialautomation。

MJL21193 (PNP),MJL21194 (NPN)Silicon Power TransistorsThe MJL21193 and MJL21194 utilize Perforated Emitter technology and are specifically designed for high power audio output,disk head positioners and linear applications.Features•Total Harmonic Distortion Characterized •High DC Current Gain •Excellent Gain Linearity •High SOA•These Devices are Pb −Free and are RoHS Compliant*MAXIMUM RATINGSRatingSymbol Value Unit Collector −Emitter Voltage V CEO 250Vdc Collector −Base Voltage V CBO 400Vdc Emitter −Base VoltageV EBO5Vdc Collector −Emitter Voltage − 1.5 V V CEX 400Vdc Collector Current −Continuous I C 16Adc Collector Current −Peak (Note 1)I CM 30Adc Base Current − ContinuousI B 5Adc Total Power Dissipation @ T C = 25_C Derate above 25_CP D 2001.43W W/_C Operating and Storage Junction Temperature RangeT J , T stg−65 to +150_CStresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.1.Pulse Test: Pulse Width = 300 m s, Duty Cycle ≤2%THERMAL CHARACTERISTICSCharacteristicSymbol Max Unit Thermal Resistance, Junction −to −CaseR q JC0.7_C/W*For additional information on our Pb −Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.x =3 or 4A = Assembly Location YY =YearWW =Work WeekG= Pb −Free PackageDevice Package Shipping †ORDERING INFORMATIONMJL21193G TO −264(Pb −Free)25 Units / Rail MJL21194GTO −264(Pb −Free)25 Units / Rail†For information on tape and reel specifications,including part orientation and tape sizes, please refer to our T ape and Reel Packaging Specifications Brochure, BRD8011/D.16 AMPERE COMPLEMENTARYSILICON POWER TRANSISTORS 250 VOLTS, 200 WATTSMJL2119x AYYWWGTO −264CASE 340G STYLE 2MARKING DIAGRAM1BASE2 COLLECTOR 3EMITTER 311PNPNPNELECTRICAL CHARACTERISTICS (T C = 25°C unless otherwise noted)CharacteristicSymbolMinTypMaxUnitOFF CHARACTERISTICSCollector −Emitter Sustaining Voltage (I C = 100 mAdc, I B = 0)V CEO(sus)250−−Vdc Collector Cutoff Current (V CE = 200 Vdc, I B = 0)I CEO −−100m Adc Emitter Cutoff Current (V CE = 5 Vdc, I C = 0)I EBO −−100m Adc Collector Cutoff Current(V CE = 250 Vdc, V BE(off) = 1.5 Vdc)I CEX−−100m AdcSECOND BREAKDOWNSecond Breakdown Collector Current with Base Forward Biased (V CE = 50 Vdc, t = 1 s (non −repetitive)(V CE = 80 Vdc, t = 1 s (non −repetitive)I S/b4.02.25−−−−AdcON CHARACTERISTICS DC Current Gain(I C = 8 Adc, V CE = 5 Vdc)(I C = 16 Adc, I B = 5 Adc)h FE258−−75−Base −Emitter On Voltage (I C = 8 Adc, V CE = 5 Vdc)V BE(on)−−2.2Vdc Collector −Emitter Saturation Voltage (I C = 8 Adc, I B = 0.8 Adc)(I C = 16 Adc, I B = 3.2 Adc)V CE(sat)−−−−1.44VdcDYNAMIC CHARACTERISTICSTotal Harmonic Distortion at the OutputV RMS = 28.3 V, f = 1 kHz, P LOAD = 100 W RMS h FEunmatched (Matched pair h FE = 50 @ 5 A/5 V)h FE matchedT HD−−0.80.08−−%Current Gain Bandwidth Product(I C = 1 Adc, V CE = 10 Vdc, f test = 1 MHz)f T 4−−MHz Output Capacitance(V CB = 10 Vdc, I E = 0, f test = 1 MHz)C ob−−500pF I C COLLECTOR CURRENT (AMPS)Figure 1. Typical Current Gain Bandwidth Product Figure 2. Typical Current Gain Bandwidth Productf , C U R R E N T G A I N B A N D W I D T H P R O D U C T (M H z )TPNP MJL21193f , C U R R E N T G A I N B A N D W I D T H P R O D U C T (M H z )T NPN MJL21194I C COLLECTOR CURRENT (AMPS)6.56.05.55.04.54.03.53.08.07.0V CE , COLLECTOR-EMITTER VOLTAGE (VOLTS)I C , C O L L E C T O R C U R R E N T (A )NPN MJL211945.0Figure 3. DC Current Gain, V CE = 20 VFigure 4. DC Current Gain, V CE = 20 VFigure 5. DC Current Gain, V CE = 5 V Figure 6. DC Current Gain, V CE = 5 Vh F E , D C C U R R E N T G A I NI C COLLECTOR CURRENT (AMPS)I C COLLECTOR CURRENT (AMPS)h F E , D C C U R R E N T G A I Nh F E , D C C U R R E N T G A I NI C COLLECTOR CURRENT (AMPS)I C COLLECTOR CURRENT (AMPS)V CE , COLLECTOR-EMITTER VOLTAGE (VOLTS)Figure 7. Typical Output CharacteristicsI C , C O L L E C T O R C U R R E N T (A )Figure 8. Typical Output Characteristicsh F E , D C C U R R E N T G A I NPNP MJL21193PNP MJL21193NPN MJL21194100010010100010010100010010V B E (o n ), B A S E -E M I T T E R V O L T A G E (V O L T S )Figure 9. Typical Saturation Voltages I C , COLLECTOR CURRENT (AMPS)S A T U R A T I O N V O L T A G E (V O L T S )Figure 10. Typical Saturation VoltagesI C , COLLECTOR CURRENT (AMPS)S A T U R A T I O N V O L T A G E (V O L T S )Figure 11. Typical Base −Emitter Voltage I C , COLLECTOR CURRENT (AMPS)Figure 12. Typical Base −Emitter VoltageI C , COLLECTOR CURRENT (AMPS)V B E (o n ), B A S E -E M I T T E R V O L T A G E (V O L T S )There are two limitations on the power handling ability of a transistor; average junction temperature and secondary breakdown. Safe operating area curves indicate I C − V CE lim-its of the transistor that must be observed for reliable opera-tion; i.e., the transistor must not be subjected to greater dissip-ation than the curves indicate.The data of Figure 13 is based on T J(pk) = 150°C; T C is vari-able depending on conditions. At high case temperatures,thermal limitations will reduce the power than can be handled to values less than the limitations imposed by second break-down.PNP MJL21193NPN MJL21194Figure 13. Active Region Safe Operating AreaV CE , COLLECTOR-EMITTER VOLTAGE (VOLTS)I C , C O L L E C T O R C U R R E N T (A M P S )3.02.52.01.51.00.501.41.21.00.80.60.40.20101.00.1100101.00.1Figure 14. MJL21193 Typical Capacitance V R , REVERSE VOLTAGE (VOLTS)C , C A P A C I T A N C E (p F )Figure 15. MJL21194 Typical CapacitanceV R , REVERSE VOLTAGE (VOLTS)C , C A P A C I T A N C E (p F )8.0 WFigure 16. Typical Total Harmonic DistortionFigure 17. Total Harmonic Distortion Test CircuitFREQUENCY (Hz)T H D , T O T A L H A R M O N I C D I S T O R T I O N (%)1.21.11.00.90.80.70.610000010000100010010STYLE 1:PIN 1.GATE2.DRAIN3.SOURCE STYLE 2:PIN 1.BASE2.COLLECTOR3.EMITTER STYLE 3:PIN 1.GATE2.SOURCE3.DRAINSTYLE 4:PIN 1.DRAIN2.SOURCE3.GATEDIM A MIN MAX MIN MAX INCHES28.029.0 1.102 1.142MILLIMETERS B 19.320.30.7600.800C 4.7 5.30.1850.209D 0.93 1.480.0370.058E 1.9 2.10.0750.083F 2.2 2.40.0870.102G 5.45 BSC 0.215 BSC H 2.6 3.00.1020.118J 0.430.780.0170.031K 17.618.80.6930.740L 11.2 REF 0.411 REF N 4.35 REF 0.172 REF P 2.2 2.60.0870.102Q 3.1 3.50.1220.137R 2.25 REF0.089 REF U 6.3 REF 0.248 REF W2.83.20.1100.125NOTES:1.DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.2.CONTROLLING DIMENSION: MILLIMETER.STYLE 5:PIN 1.GATE2.COLLECTOR3.EMITTER0.25 (0.010) M T BSSCALE 1:2TO −3BPL (TO −264)CASE 340G−02ISSUE JDATE 17 DEC 2004GENERICMARKING DIAGRAM**This information is generic. Please refer to device data sheet for actual part marking.Pb −Free indicator, “G” or microdot “ G ”,may or may not be present.XXXXXX AYYWWXXXXXX = Specific Device Code A = Location Code YY = YearWW = Work WeekMECHANICAL CASE OUTLINEPACKAGE DIMENSIONSON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor theADDITIONAL INFORMATIONTECHNICAL PUBLICATIONS:Technical Library:/design/resources/technical−documentation onsemi Website: ONLINE SUPPORT: /supportFor additional information, please contact your local Sales Representative at /support/sales。

SZT-2C 四探针测试仪使用说明书一概述SZT-2C 型数字式四探针测试仪是运用四线法测量原理的多用途综合测量装置，配上专用的四探针测试架，即可以测量片状，块状或柱状半导体材料的径向和轴向电阻率，测量扩散层的薄层电阻（亦称方块电阻）。

四探针测试架有电动，手动，手持三种可以选配，另外还配有四个夹子的四线输入插头用来作为测量线状或片状电阻的中，低阻阻值。

仪器由主机，测试架等部份组成，测试结果由液晶显示器显示，同时，液晶显示器还显示测量类型（电阻率，方块电阻和电阻）; 探头修正系数和温度值，用来监测仪器使用时的环境温度。

主机由开关电源，DC/DC变换器，高灵敏度电压测量部份，高稳定度恒流源，和微电脑控制系统组成。

由於采用大规模集成电路，所以仪器可靠性高，测量稳定性好。

测试探头采用宝石导向轴套和高硬度钢针，定位准确，游移率小，使用寿命长。

仪器适用於半导体材料厂，半导体器件厂，科研单位，高等院校对半导体材料电阻性能的测试。

本仪器工作条件为：使用温度：23C 士3C相对湿度：50%~70%工作室内应无强磁场干扰，不与高频设备共用电源，二，技术参数1，测量范围6电阻率：10 ??-10 6? -cm 方块电阻10 ??- 10 6?/ □ 电阻10 -? -10 6 ?2 ，可测半导体材尺寸直径：①5-250mm长（或高）度：< 400mm如配探笔可以测量任意长度）3，测量方位轴向，径向均可4，数字电压表：（1）量程：20mV,200mV,2V（2）误差：±0.1%读数±2字（3）输入阻抗:>10 ??（4）最大分辨率:10卩V（5）点阵液晶显示，过载显示。

5，恒流源：（1）电流输出：共分10卩A,100uA,1mA,10mA,100m>六挡可通过按键选择，各挡均为定值不可调节，电阻率探头修正系和扩散层方块电阻修正系数均由机内CPU运算后，直接显示修正后的结果。

(2)误差：士0.5%士2字，在使用1卩A恒流电流输出时为± 0.5%± 5字6, 四探针测试头;(1) 探针间距: 1mm(2)士1.0%探针机械游移率:(3) 探针材料: 碳化钨,①0.5mm(4) 0-2Kg 可调, 最大压力约2Kg7 ，温度传感器；本仪器增加了高精度的温度传感器，以监测仪器使用时的环境温度。

243/51Module assembly / disassemblyModule connectionSolenoid pilots addressing and process data mappingFor further details, please refer to the User Manual: it can be downloaded from /pde/P2M_IE*)Byte 3/Bits 3to 7are not connected to valves with Moduflex Valve Range.When connected to H Micro or H Universal ISO Valve Series,Byte 3can be fully exploitedP2M Node 24DO addressing used with Moduflex Valve SystemThe P2M Node 24DO used with Moduflex Valve System can handle up to 19pilot solenoid valves.Addressing is as shown below:Byte 1EV08 . . . . . . . . . . . . . . EV0107PLC Process outputs data mapping32Byte 2EV16 . . . . . . . . . . . . . . EV09Byte 3*EV24 . . . . . EV20EV19 ... EV17. . . . . . . . . . . . P2M Node IP-Address Setting & Configuration FileEth2PowerFor details on appropriate valve adaptor to use,please refer to the respective valve series technical catalogue and instruction sheets.The P2M Node 24DO Auxiliary Power for valves can be supplied from a SAFE 24Vdc auxiliary source in PP or PM mode,as well as from Output Switching Signals Device Failsafe Digital Outputs (OSSD FDO).P2M Node 24DO connected to SAFE power supply for Auxiliary PowerNote :2A Auxiliary Power Max CurrentEth1IP-Address Settingx 100x 10x 1Network In & Out M12 D-CodedPIN #Description 1TxData +2RxData +3TxData -4RxData -Auxiliary Power M12 A-CodedPIN #Description 1Logic Power +2AUX Power -3Logic Power -4AUX Power +NOTE 1: keep the screws attached to the plastic window when setting IP-Address NOTE 2:0,35 Nm torque rating for IP-Window screws (for IP65 rating).EV01EV02EV03EV04EV05EV06EV07EV08EV09EV10EV11EV12EV13EV14EV15EV16EV17EV18EV19The configuration files and integration tools are available for download at from the P2M Node 24DO web site: /pde/P2M_IELocal diagnostic through LED:The P2M Node 24DO offers a local diagnostic by 7LED’s with interpretation described in the table below:DiagnosticP2M Node electrical specificationsDescriptionValueNetwork power supply According to ModBus TCP/IP standard Speed communication According to ModBus TCP/IP standardAuxiliary power supplyVoltage 20,4 Vdc to 26,4 VdcCurrent limit per channel 150 mAMax.current limit 2 APolarity inversion protection YES Short circuit protection YES Operating temperature 0°C to +55°C Storage temperature -25°C to +70°C Shock According to IEC 60068-2-27:2008 Vibration According to IEC 60068-2-6:2007 EMC According to EN 55011 & EN 61000-4-2 up to -4-6Byte 0Diag 7 . . . . . . . . . . . . . Diag 0Byte 1ReservedBit #Error NameError DescriptionDiag 0Ack-RequiredSet if any major fault active.Outputs are switched OFF and acknowledge is required to restart the module to normal operationDiag 1Auxiliary Voltage Warning Set if auxiliary voltage in warning range. Module keeps normal operationDiag 2Auxiliary Voltage Failure Auxiliary voltage in Error range. Outputs are switched OFF and acknowledge is required to restart the module to normal operationDiag 3Temperature Warning Set if a temperature increase above warning levels is detected by the output drivers Diag 4Output Driver Channel Error Set if a major fault is detected at the output stage –solenoid short circuit. Outputs are switched OFF and acknowledge is required to restart the module to normal operation Diag 5Module ErrorSet if an internal communication error is active. Depending on the fault the module might require acknowledgment.Diag 6Outputs Stage Not Available Set if auxiliary power is missing. No acknowledge is required Diag 7-15ReservedThese bits will be always set as 0Address Register Name Data Type Access 0x1210Module Error Input UINT16ReadNote :For further details,please refer to the user manualLED Name Color Function(s)Power Red / GreenSolid GREEN :Auxiliary power within specsBlinking GREEN :Auxiliary power in "Warning Range"Solid RED :Auxiliary power in "Error Range"Output Error Red OFF :No active error / faultSolid RED :Detected error affecting output stageNS Red / Green Network Status indicator accordingly to ModBus TCP/IP standard MS Red / GreenModule Status indicator accordingly to ModBus TCP/IP standardL/A 2Green / Yellow Ethernet Port 2 (Eth 2) Link / ActivityL/A 1Green / Yellow Ethernet Port 1 (Eth 1) Link / ActivityLogic StatusRed / GreenSolid GREEN :Logic power OK Blinking RED :Invalid rotary switch settingSolid RED :Any error that requires acknowledge Blinking RED-GREEN :Unexpected / Invalid firmware versionDiagnostic through network via ModBus Register “Module Error Input”The P2M Node 24DO module offers diagnostic data transmitted to the PLC as Process Data Input via the ModBus Register “Module Error Input:。

U O n/Off orProportional Control UC onvenient Receptacles for Input andOutput Connections U C ompact Benchtop Design U 15 A Maximum Output UJ , K Thermocouple or RTD Input U O n/Off Power SwitchThe MCS-2110 and CS-2110 seriesbenchtop controllers are ideal for laboratory use and applications requiring portable temperature control. Pre-wired input andoutput receptacles at the back of the case enable quick and easyconnections to power, thermocouple or RTD input and power output.Thermocouple models use universal female connector to accept either a miniature or standard male connector. RTD models use a 3-prong female connector to accept an OTP-U-M type connector. A 120 Vac, 15 A maximum output receptacle can be used to control heaters or other devices up to 1800 watts. TheMCS-2110 and CS-2110controllers operate in either on/off or proportional control modes, selectable by a simple front panel adjustment.Control ModesThe CN2110 provides precise, solid state proportion control with automatic reset (PI) that will control most heating applications. On/off control may be selected forapplications where maximum output life (load switching) is needed.All models operate on 120 Vac, 15 A and include a 1.5 m (5') power cord.MCS-2110 SeriesBenchtop Temperature ControllersMCS-2110J-R shownsmaller than actual size.Ordering Examples: MCS-2110J-R , benchtop controller, single 15 A relay output, Type J thermocouple input, -73 to 760°C (-100 to 1400°F) range.OCW-3, OMEGACARE SM extends standard 1-year warranty to a total of 4 years.SpecificationsControl Modes: On/off, PI-proportional with integralControl AdjustmentsProportional Band: sensor range Automatic Reset:0.0 to 99.9 repeats/minuteCycle Time: 0.1 to 60.0 seconds On/Off Deadband: 1° to 100°F or °C Setpoint Upper Limit: Sensor range °F or °C Setpoint Lower Limit: Sensor range °F or °C Output Limit: 0 to 100%Alarm Adjustments:Type: Absolute high or lowSetpoint: Sensor range °F or °CAlarm Dead Band: 0° to 100°F or °C Control/Alarm Outputs Relay: Form “A”, 120 Vacresistive loads at 30 seconds, cycle time; 15 A, 500,000 operations; 15 A, 1 million operations; 5 A, 5 million operationsSolid State Relay: Up to 10 A at 40°C Sensor Input: Switch selectable, J, K thermocouple or RTDInput Update Rate: 4 samples/s Readout Stability:J and K Thermocouple: ±1°F/10°F change in ambient temperature RTD: ±0.5 per 10°F change in ambient temperatureOpen Sensor and Out-of-Range Conditions: Displays “SENS”; control output 0%Instrument Power: 120 Vac <10 Va Operating Environment: 0° to 65°C (32°to 150°F)Enclosure Material: High-temperature ABS plastic rated for 0° to 175°F Front Panel: NEMA 4X construction Influence of Line Voltage Variation: ±0.1% of sensor span per 10% change in nominal line voltage Noise Rejection:Common Mode Noise: <2°F with 230 Vac, 60 Hz applied from sensor input to groundSeries Mode Noise: <2°F with 100 mV, peak-to-peak series mode noiseRFI: Typically <0.5% of sensor span at distance of 1 m (3.1’) from a transmitter of 4 W at 464 MHz Sensor Leadwire Effect:RTD: ±0.1% of sensor span per 20Ω balanced leadwire resistanceThe UPJ-K-F universal connector accepts eitherRear ViewMC OutputAC powerOMEGACARE SM extended warranty program isavailable for models shown on this page. Ask your sales representative for full details when placing an order. OMEGACARE SM covers parts, labor and equivalent loaners.。

Document No. D11232EJ2V0DS00 (2nd edition)Date Published June 1996 PPrinted in Japan199622SK21123TYPICAL CHARACTERISTICS (T A = 25 ˚C)DERATING FACTOR OF FORWARD BIAS SAFE OPERATING AREAd T - De r a t i n g F a c t o r - %FORWARD BIAS SAFE OPERATING AREAV DS - Drain to Source Voltage - VI D - D r a i n C u r r e n t - AV GS - Gate to Source Voltage - VFORWARD TRANSFER ADMITTANCE vs.DRAIN CURRENT I D - Drain Current - A |y f s | - F o r w a r d T r a n s f e r A d m i t t a n c e - SDRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENT I D - Drain Current - AR D - Ω4DRAIN TO SOURCE ON-STATE RESISTANCE vs. DRAIN CURRENTI D - Drain Current - A SWITCHING CHARACTERISTICSI D - Drain Current - At d (o n ), t r , t d (o f f ), t f - S w i t c h i n g T i m e - n sDRAIN TO SOURCE ON-STATE RESISTANCE vs. GATE TO SOURCE VOLTAGE 10.5051020V GS - Gate to Source Voltage - VR D S (o n ) - D r a i n t o S o u r c e O n -S t a t e R e s i s t a n c e - ΩI D = 0.5 A15C i s s , C o s s , C r s s - C a p a c i t a n c e - p FCAPACITANCE vs.DRAIN TO SOURCE VOLTAGEV DS - Drain to Source Voltage - V I S D - D i o d e F o r w a r d C u r r e n t - ASOURCE TO DRAIN DIODEFORWARD VOLTGE10.010.20.40.71V SD - Source to Drain Voltage - V0.80.90.30.50.60.10.0010.0001R D S (o n ) - D r a i n t o S o u r c e O n -S t a t e R e s i s t a n c e - ΩREFERENCEDocument Name Document No.NEC semiconductor device reliability/quality control system TEI-1202Quality grade on NEC semiconductor devices IEI-1209 Semiconductor device mounting technology manual C10535EGuide to quality assurance for semiconductor devices MEI-1202 Semiconductor selection guide X10679E5[MEMO]No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document.NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others.While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customer must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features.NEC devices are classified into the following three quality grades:“Standard“, “Special“, and “Specific“. The Specific quality grade applies only to devices developed based ona customer designated “quality assurance program“ for a specific application. The recommended applicationsof a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application.Standard:Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronicequipment and industrial robotsSpecial:Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designedfor life support)Specific:Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc.The quality grade of NEC devices in “Standard“ unless otherwise specified in NEC's Data Sheets or Data Books.If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact NEC Sales Representative in advance.Anti-radioactive design is not implemented in this product.M4 94.11。

1Circuit Breaker for Equipment thermal, Threaded neck type, Reset type, Quick connect terminalsSee below:Approvals and CompliancesDescription- Threaded neck type - Thermal circuit breaker - 1-pole - Reset type- Quick connect terminals 6.3 x 0.8 mmUnique Selling Proposition- Compact design- Positively trip-free release - Available with cover- Different mounting possibilitiesApplications- Power supplies- Uninterruptible power supply - Power tools- Household appliancesWeblinkspdf datasheet , html-datasheet , General Product Information , Distributor-Stock-Check , Detailed request for product , Product NewsT echnical DataRated Voltage AC AC 240 V: 50/60 Hz Rated Voltage DC28 VRated current range AC 0.05 - 15/16 A , see approbations Conditional short circuit ca-pacityIEC: Inc, PC1, AC 240 V: 1 kA Short circuit capacity Icn at In < 7 A/240 VAC : 8 x In ␣at In ≥ 7 A/240 VAC : 200 A ␣AC/DC 28 V : 400 ADegree of Protection from front side IP 40 acc. to IEC 60529Dielectric Strength 50 Hz: > 1.5 kVImpulse 1.2/50 μs: > 2.5 kV Insulation Resistance 500 VDC > 100 M ΩEndurance typical 2 x Ir: 5000 switching cycles Endurance minimumReset typeAC : 2 x Ir , cos φ 0.6 :DC : 2 x Ir , L/R = 2 - 3 ms : 50 switching cyclesOverload IEC: min. 40 trips @ 6 x Ir, cos φ 0.6␣UL / CSA: min. 50 trips @ 1.5 x Ir, cos φ 0.75Allowable Operation Temp.-5 °C to 60 °CVibration Resistance± 1.5 mm @ 10 - 60 Hzacc. to IEC 60068-2-6, test Fc 10 G @ 60 - 500 Hzacc. to IEC 60068-2-6, test Fc Shock Resistance 100 G / 6 msacc. to IEC 60068-2-27, test Ea Tripping Type Thermal Actuation Type Reset type Weightca. 10 gApprovals and CompliancesDetailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about ApprovalsSCHURTER products are designed for use in industrial environments. They have approvals from independent testing bodies according to national and international standards. Products with specific characteristics and requirements such as required in the automotive sector according to IATF 16949, medical technology according to ISO 134485 or in the aerospace industry can be offered exclusively with customer-specific, individual agree-ments by SCHURTER.ApprovalsThe approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference T ype: T12Approval Logo Certificates Certification Body DescriptionVDE Approvals VDE VDE Certificate Number: 99673UL Approvals ULUL File Number: E71572CQC Approvals CQC CCC Certificate Number: 2012010307564275 Product standardsProduct standards that are referencedOrganization Design StandardDescriptionDesigned according to IEC 60934Circuit-breakers for equipment (CBE)Designed according to UL 1077Standard for Supplementary Protectors for Use in Electrical EquipmentDesigned according to CSA C22.2 No. 235Supplementary ProtectorsDesigned according to GB 17701Circuit-breaker for equipment Application standardsApplication standards where the product can be usedOrganization Design StandardDescriptionDesigned for applications acc.IEC/UL 60950IEC 60950-1 includes the basic requirements for the safety of informationtechnology equipment.CompliancesThe product complies with following Guide LinesIdentification Details Initiator DescriptionCE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicablerequirements laid down in the harmonisation of Community legislation onits affixing in accordance with EU Regulation 765/2008.RoHS SCHURTER AG EU Directive RoHS 2011/65/EUChina RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March2007. It is similar to the EU directive RoHS.REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as"REACH") entered into force.23Dimension [mm]T12-211+0.5T12-211SN4DiagramsT12-...T12-...NT12-...ST12-...SNEffect of ambient temperatureThe units are calibrated for an ambient temperature of +23°C. To determine the rated cur-rent for a lower or higher ambient temperature, use a correction factor (typical value) from1.2, Resulting current = 6.0 A56Time-Current-CurvesT i m e i n S e c o n d s10'000600,0,0,0,[ sec ][ min ]10513020Multiple of Rated Current InReference Temperature +23°Config. CodeT12-123AB C |-|1.23|The characters are placeholders for the correspondingly keys of selections from the key tables.T12- 1 23A B C |-|1.23| = MountingT12|-|1| 2 |3|A |B |C |-|1.23| = Actuation TypeT12|-|1|2| 3 |A |B |C |-|1.23| = TerminalT12|-|1|2|3| A |B |C |-|1.23| = Auxiliary contactT12|-|1|2|3|A | B |C |-|1.23|= Shunt terminalT12|-|1|2|3|A |B | C |-|1.23| = Setting indicationT12|-|1|2|3|A |B |C |-| 1.23 | = Rated currentVariantsPackaging Unit 20 Pcs AccessoriesDescriptionT-Line AccessoriesAccessories to T-LineThe specifications, descriptions and illustrations indicated in this document are based on currentinformation. All content is subject to modifications and amendments. Information furnished is believed19.12.2187。

南自芯片型号-概述说明以及解释1.引言1.1 概述概述部分内容:在现代科技发展的驱动下，芯片技术不断地突破与创新，成为信息时代中的核心技术之一。

南自芯片作为国内领先的芯片设计企业，长期以来致力于推动中国芯片产业的发展。

本文旨在对南自芯片型号进行深入研究，全面了解其技术特点及应用范围，以期为读者提供有价值的信息。

南自芯片型号是南自公司设计和生产的一系列芯片产品，涵盖了多个领域的应用。

这些芯片具有高度集成、低功耗、高性能等特点，可以广泛应用于智能手机、电脑、物联网、人工智能等领域。

南自芯片型号凭借其卓越的性能和稳定性，已经成为许多企业和消费者的首选。

南自芯片型号以其先进的制造工艺和独特的设计理念，不断提升产品的性能和可靠性。

通过引入先进的制程技术和材料，南自芯片型号能够实现更高的集成度，提供更强大的计算能力和更低的功耗。

同时，南自芯片型号还针对不同应用场景的需求进行了差异化设计，以保证其在各个领域的优异表现。

在市场竞争激烈的环境下，南自芯片型号凭借其独特的技术优势和稳定的品质赢得了广大客户的信赖。

无论是智能手机厂商还是物联网设备制造商，在选择芯片供应商时，纷纷将南自芯片型号列为首选。

南自芯片型号以其出色的性能和稳定可靠的运行，为客户提供了核心竞争力的保障。

总之，南自芯片型号作为中国芯片设计领域的重要代表，具有重要的战略意义和市场地位。

本文将深入探讨南自芯片型号的技术特点和应用范围，为读者提供全面的了解和参考。

同时，本文还将对南自芯片型号未来的发展进行展望，探索其在新技术和新应用领域的潜力和机遇。

1.2 文章结构文章结构部分的内容如下：2. 文章结构在本文中，将按照以下顺序进行阐述芯片型号的相关内容。

首先，在引言部分中，将概述本文的主题，并介绍文章的结构和目的。

接着，在正文部分，将详细讨论三个要点，分别是第一个要点、第二个要点和第三个要点。

最后，在结论部分，将对前文进行总结，并展望未来的发展，并给出最终的结论。