PHILIPS-HID性能参数

飞利浦光源介绍许晓景 OEM技术支持照明光源固体发光光源白炽灯 (热辐射光源) 场致发光灯真空灯 充气灯 卤钨灯 充气灯泡荧光灯电光源半导体发光灯LED 低气压灯弧光放电灯紧凑型荧光灯 QL灯 低压钠灯气体放电发光光 源高压汞灯 高气压灯霓虹灯 氖灯高压钠灯 金卤灯 高压氙灯 碳弧灯 其他2辉光放电灯表示灯泡光电性能的主要技术参数Main parameters of lamp • • • • • • • 功率(power) 瓦 (W) 光通量(Lumen output) 流明 (lm) 色温(color temp.) 开 (K) 显色指数(color rendering) Ra 寿命aver. Life) 小时 (h) 发光效率(efficiency) 流明/瓦(lm/W) 光通维持率 maintenance %3飞利浦荧光灯介绍及其创新内容简介• TL荧光灯介绍– T5荧光灯介绍及趋势 • 紧凑型荧光灯介绍– 一体化紧凑型荧光灯 – 分离式紧凑型荧光灯• 总结5飞利浦荧光灯产品线结构LAMPS GLS Halogen环管TLCFL直管HIDTLETLE 54T5Master T5 HE Master T5 HO ES T5 Mini T5 TLD std C2S TLD reflexT8TLD super 80 TLD secura TLD 90 delux6管径的比较T12 T8 T57T5 光源及其应用趋势简介应用趋势应用 主要趋势 • 更自由的应用场所 • 间接照明 • 小型化设计 • 节能化设计 • 重视光线质量 • 优化替换（超长寿命减少替换） • 光色由黄光向白光转换（4000K)• 可调光（亮度，光色） • 高流明输出9TL5 特点16mm 直径，适应更小设计 HE (14, 21, 28, 35W) & HO (24, 39, 49, 54, 80W) 冷室技术，使最高光效达 104lm/W 低汞 (1.4 or 3.0mg)，更加环保 三基色涂粉(/80 and /90 colors) 平均寿命24k 小时 只适用电子整流器 不同的灯脚 (G5 instead of G13)10BENEFITS TL5改进的光学表现带来新的设计可能 小型化：16mm直径带来更紧凑更舒适的照明 成本降低: 长寿命 (24k hours) 以及几乎持久的光输出 更高的灯具效率 (TL-D: 25oC) 节能达到 40% 环保: 只有3mg含汞量 需要更小的空间和更少的包装材料11环境温度对灯管性能的影响（冷室技术）Relative values % → 140 T8 T5 100602020 30 40 50Tambient (draught-free air) °C →12BENEFITS TL5ALMOST CONSTANT LIGHT OUTPUTLumen in % → 100 90 80 70 60 50 0 4000 8000 12000 16000 2000090Burning hours →Almost constant light output during entire lifespan Max. decrease of 10%13飞利浦紧凑型节能灯介绍飞利浦紧凑型荧光灯产品线结构LAMPS GLS Halogen民用CFLTL专业HIDCFL-IEssential Ambiance Genie TornadoCFL-IMaster SLE Master PLEU PL-S PL-C PL-L PL-TCFL-NIPL-LJ PL-F PL-H PL-QMaster EcoHLDecoTwist15一体化紧凑型荧光灯专业产品系列适应各种环境 Í 汞齐技术 超常寿命达10,000 小时 节电 80% 宽电压设计:170-250V 符合 IEC标准• • •低业主总成本 寿命从 8,000 小时提高到 10,000 小时 运用汞齐技术– 更佳流明维持率 – 适应各种环境温度 (室内&室外)17什么使得Master CFL-I从同类产品中脱 颖而出?1. 在同类中有最佳的温度性能– 汞齐技术的应用保证在不同应用场合都能达到高 流明输出2. 最优化的总体成本– – 长的寿命和高的光通维持率:减低了需要置换灯的成本 可靠的工作使批量置换变为可能18汞齐技术应用于MASTER规格• 稳定的光输出– 应用于室内&室外 – 在相同的照度级别下 需要的灯数量更少 – 较低的汞含量• 更好的光通维持率19MASTER PLEU• • • • 低业主使用总成本 10,000寿命 汞齐技术 高光效20MASTER SLE(D)•防眩光外罩•低业主使用总成本•10,000寿命•汞齐技术•高光效Ecotone2005（大功率一体化节能灯）: 10,000 小时民用产品系列替代灯泡ÍGenie, Ambiance长寿(确保使用三年)节电达80%宽幅电压设计: 170-250V符合IEC标准Essential•Mature product in CFL portfolio, cash cow •No new product development, focus on quality •Cost drive in purchasing•Defend market share, lower price if needed特点•高性价比•三年使用寿命•适用民用应用场所Strategy•Product in growth phase, as is market growth => Star •Controlled price reduction to take over Essential•Technical development: increase quality levels, make all versions available to all NLO ’s •Grow market share, price premium over EssentialGenie•最小的外形•三年使用寿命(6,000hrs) •理想的灯泡替代产品Strategy•New product launch in HV APR (early & rapid growth)•High market growth expected, share still relatively low (qualification: question mark) => grow share •Upgrade in portfolio, priced at premium from high Wattage Essentials 18W & 23W •Innovation medium term: smaller size (T2 burner)Tornado•紧凑外形，高流明输出•装饰性“螺旋形”外形新增加产品系列DecoTwist•直接安装•T5分离式紧凑型荧光灯PL-LPL-C600 -1800 lmRedesignedPL-T飞利浦T5C产品线分布及流明输出PL -接桥技术的影响PL-C Master 特性接桥位置的优化:•实际使用中光通量提高了6%•提高了系统的温度特性先进的飞利浦保护膜技术:•灯的寿命从8000提高到了10000小时•光通维持率得到提高，保证寿命期间稳定光通输出•同样的投入，12％的额外光通2 -4 mm 4 -8 mm比竞争对手多了18%的光通PL-S rangeRange E cotoneProduct type P L-SU SP B ridge technologyBenefits- Low cost of ownership- Long life (8,000 hours)Application E mergency lighting, consumerluminairs, downlightingTarget market P rofessional end users, hospitalityW hy in portfolio ?Replacement product, stablemarket. OE M opportunitiesCompetition OsramPL-C rangeRange E cotoneProduct type P L-C MASTERU SP B ridge technologyBenefits- Higher Lumen output- Low cost of ownership- Long life (10,000 hours)Application DownlightingTarget market P rofessional end users, hospitalityW hy in portfolio ?Unique features in fast growingdown-lighting segmentCompetition Osram Dulux, GE B iaxPL-L rangeRange E cotoneProduct type P L-L MASTERU SP B ridge technologyBenefits- Higher Lumen output- Low cost of ownership- Long life (12,000 hours)Application Office (TL) luminaires, recessedTarget market P rofessional end users, hospitalityW hy in portfolio ?High Lumen, compact alternativefor TL applications (T5!)Competition Osram Dulux, GE B iaxPL-T rangeRange E cotoneProduct type P L-TU SP Amalgam technologyBenefits- S table Lumen output- Low cost of ownership- Long life (15,000 hours)Application E mergency lighting, downlightingTarget market P rofessional end users, hospitalityW hy in portfolio ?Offers high Lumen options in downlightersCompetition Osram Dulux T, GE B iax Q灯管设计改变(由弯管变为直管-使用冷端技术-瓦数增大到-更小灯座新PL-T的优势优势:全新设计•对称的外形•小灯脚•小的尺寸•可以替代所有竞争者的类型优势PL-T 42wStandard 42wPLTSelect the right lamp for the best performance of your lighting installation.MASTER PL-TMASTER PL-T (with Cold Spot technology)Select the right lamp for the best performance of your lighting installation.Marketing & Business Development Light PJL Confidential60W 4000 lm/830 and /84085W 6000 lm120W 9000 lmMaster PL-H rangePL-H luminairesPL-Q Pro配合灯具适合走廊，厕所，电梯间，接待处等场所照明灯脚: 2GX13管径: 16mm(比TLE管径细55%）使用电子整流器22W40W55W60WT5C产品规格TL5C。

应用说明 # 28HID iCLASS 13.56 MHz 读/写非接触式智能卡和读卡器HID iCLASS 13.56 MHz 读卡器、读卡器/写卡器和非接触式智能卡与现有的门禁系统兼容，并且通过与不同应用系统提供商的整合，可以在更多领域应用，如生物识别、考勤系统、电子货币及自动售买、HVAC 自动控制和记帐、IT 安全认证、警卫巡逻、停车管理和医疗或服务记录储存。

HID iCLASS读卡器可以将 13.56MHz RF 能量转换成电能，与无源iCLASS非接触式智能卡进行通讯。

ISO 15693 标准可以实现更长的读取范围，同时又符合FCC 能量输出限制。

由于认证密钥更大，加密功能更强，iCLASS提供的安全性比同类的 13.56MHz 技术，如 MIFARE 1要高。

与 MIFARE 的 48 位密钥相对，iCLASS使用 64 位密钥，而且iCLASS使用多种不同的密钥，并且可以使用DES 或 Triple DES 在卡上加密储存的数据，而 MIFARE 是随意存储其密钥和数据。

本文档将做概括介绍，可以让你熟悉应用系统提供商、咨询商、经销商和最终用户是如何使用iCLASS功能的。

要实现一项新的应用，需要“软件开发套件”以及厂家培训和认证。

iCLASS读卡器iCLASS读卡器备有三种颜色：黑色、灰色和白色。

它们还备有以下三种不同的规格用于各种不同的用途，见下所述。

除不同的 LED 和蜂鸣器操作模式之外，这些读卡器还有许多其它配置选项，可以在工厂进行预设置，或使用 HID 技术支持部门提供的专用配置卡在现场进行修改。

iCLASS读卡器产品可以分为三类：只读型、读/写型和 OEM 型。

只读型（韦根输出）R10 – 用在门框、竖框和其它受限制的空间上R30 – 用在 80mm 正方形欧洲或亚洲背盒上R40 – 用在美国 J-box 上，另外还配有欧洲/亚洲安装孔这些读卡器都配有标准韦根接口，可以配合多数门禁系统使用。

用于HPL and HPI(PLUS)灯的 HID基础镇流器BHL 125 L200浸渍（HID标准）电感镇流器适用于HID光源，与一个外部触发器结合使用产品数据•整体参数标准镇流器-光源功率125应用代码L200线电压220 V 频率50 Hz•工作参数输入电流 PF-corr功率因素校正0.7 A输入电流 w/o功率因素校正1.15 A电源电压安全（交流）-10%/+10%电源电压性能（交流）-8%/+6%100％功率因素的输出功率0.85 (min) -功率因素w/o 功率因素补偿0.55 -功率损耗的镇流器12.2 W•接线要求连接器类型螺丝•温度参数最大绕组温度(tw)130 (max) C •产品尺寸长度 A1117.0 mm固定孔距长度A2102.0 mm宽度 B157.1 mm高C151.5 mm固定孔直径D1 6.2 mm•相关认证标志YesENEC认证证书NoCCC 认证证书Yes•产品数据订单代码913710105050完整的产品名称BHL 125 L200订单产品名称BHL 125 L200每一包中的件数1包装配置6每一个外箱中的包数6包上的条形码 -EAN18710163148540外箱上的条形码 -EAN38710163032672物流代码 - 12NC913710105050每件净重 1.330 kg二维绘图ProductA1 (Norm)A2 (Norm)C1 (Norm)D1 (Norm)W (Norm)BHL 125 L200117.0102.051.56.257.1© 2012 Koninklijke Philips Electronics N.V.保留所有权利。

规格如有更改，恕不另行通知。

所有商标均是 Koninklijke Philips Electronics N.V. 或它们各自所有者的财产。

/lighting2012, 三月 15要更改的数据主题。

产品名称型号性能参数参考图片PROXCARD ®II 标准感应卡（厚卡）1326尺寸:5.4x8.6x0.19cm;如需打印图像,可使用粘膠标签(需另购)配合标准感应卡;内存:最大84bits.适应温度：-50°to 160°F (-45°to 70° C)在各个读卡器上的读卡距离：6055：7.5 cm 5365：14 cm5395：14 cm5355/5355K ：20 cm5455：22.9 cm5375：60 cm质保期：终身重量：6.8gISOPROX ® II超薄感应卡1386尺寸:5.4x8.6x0.084cm;感应卡表面可供制卡打印机直接打印图像;厚度和大小与普通信用卡相同;可供纵切或横切打孔;保用二年;内存:最大84bits.适应温度：-50°to160°F(-45°to70°C)读卡距离：6005：6.25cm 5365：12.5 cm5395：12.5 cm5355：17.5 cm5455：20cm5375：50cm质保期：终身重量：6.8gPROXKEY ® II感应锁匙坠1346尺寸:4.83×2.29×0.88cm;体积小,可系于钥匙圈上携带;与所有HID 感应式读卡器完全兼容;内存:最大84bits.适应温度：-50°to160°F(-45°to70°C)读卡距离：6055：3.7cm 5365：5cm5395：5cm5355：7.5cm5455：10.2cm5375：28cm质保期：终身重量：7.4gmMICROPROX ® TAG感应标签1391尺寸:3.2639x0.178cm;带粘膠的标签,可贴于PVC 卡、手机或钱包等随身携带的物品上;保用二年;内存:最大84bits.适应温度：-50°to160°F(-45°to70°C)读卡距离：6055：5.1cm 5365：5.7cm5395：6.4cm5355：5.7cm5455：8.9cm5375：11.4cm质保期：终身重量：1.18g低频产品系列（PROX ）所有PROX 系列均为ID 型，只读，载波频率125KHz 。

产品名称型号性能参数参考图片PROXCARD ®II 标准感应卡（厚卡）1326尺寸:5.4x8.6x0.19cm;如需打印图像,可使用粘膠标签(需另购)配合标准感应卡;内存:最大84bits.适应温度：-50°to 160°F (-45°to 70° C)在各个读卡器上的读卡距离：6055：7.5 cm 5365：14 cm5395：14 cm5355/5355K ：20 cm5455：22.9 cm5375：60 cm质保期：终身重量：6.8gISOPROX ® II超薄感应卡1386尺寸:5.4x8.6x0.084cm;感应卡表面可供制卡打印机直接打印图像;厚度和大小与普通信用卡相同;可供纵切或横切打孔;保用二年;内存:最大84bits.适应温度：-50°to160°F(-45°to70°C)读卡距离：6005：6.25cm 5365：12.5 cm5395：12.5 cm5355：17.5 cm5455：20cm5375：50cm质保期：终身重量：6.8gPROXKEY ® II感应锁匙坠1346尺寸:4.83×2.29×0.88cm;体积小,可系于钥匙圈上携带;与所有HID 感应式读卡器完全兼容;内存:最大84bits.适应温度：-50°to160°F(-45°to70°C)读卡距离：6055：3.7cm 5365：5cm5395：5cm5355：7.5cm5455：10.2cm5375：28cm质保期：终身重量：7.4gmMICROPROX ® TAG感应标签1391尺寸:3.2639x0.178cm;带粘膠的标签,可贴于PVC 卡、手机或钱包等随身携带的物品上;保用二年;内存:最大84bits.适应温度：-50°to160°F(-45°to70°C)读卡距离：6055：5.1cm 5365：5.7cm5395：6.4cm5355：5.7cm5455：8.9cm5375：11.4cm质保期：终身重量：1.18g低频产品系列（PROX ）所有PROX 系列均为ID 型，只读，载波频率125KHz 。

1.Product profile1.1General descriptionLow capacitance ElectroStatic Discharge (ESD) protection diodes in ultra small SMD plastic packages designed to protect one signal line from the damage caused by ESD and other transients.1.2Features1.3Applications1.4Quick reference dataPESD5V0S1BA;PESD5V0S1BB;PESD5V0S1BLLow capacitance bidirectional ESD protection diodesRev. 03 — 17 December 2004Product data sheetTable 1:Product overviewType numberPackage PhilipsJEITA PESD5V0S1BA SOD323SC-76PESD5V0S1BB SOD523SC-79PESD5V0S1BLSOD882-s Bidirectional ESD protection of one line s ESD protection > 30 kVs Max. peak pulse power: P PP = 130 W s IEC 61000-4-2, level 4 (ESD)s Low clamping voltage: V (CL)R = 14 V s IEC 61000-4-5 (surge); I PP = 12 A sUltra low leakage current: I RM = 5 nAsUltra small SMD plastic packagess Cellular handsets and accessories s Communication systems s Portable electronicss Audio and video equipments Computers and peripheralsTable 2:Quick reference data Symbol ParameterConditionsMin Typ Max Unit V RWM reverse stand-off voltage --5V C ddiode capacitanceV R = 0 V;f = 1MHz -3545pF查询PESD5V0S1BA供应商2.Pinning information3.Ordering information4.MarkingTable 3:PinningPin Description Simplified outline SymbolSOD323, SOD5231cathode 12cathode 2SOD8821cathode 12cathode 2001aab54012sym0452121Transparent top viewsym04521Table 4:Ordering informationType numberPackage NameDescriptionVersion PESD5V0S1BA SC-76plastic surface mounted package; 2 leads SOD323PESD5V0S1BB SC-79plastic surface mounted package; 2 leads SOD523PESD5V0S1BL-leadless ultra small plastic package; 2 terminals;body 1.0× 0.6× 0.5 mmSOD882Table 5:Marking codesType number Marking code PESD5V0S1BA E6PESD5V0S1BB L7PESD5V0S1BLF15.Limiting values[1]Non-repetitive current pulse 8/20µs exponentially decaying waveform according to IEC61000-4-5; see Figure 1.[2]Measured from pin 1 to pin 2.[1]Measured from pin 1 to pin 2.[2]Device stressed with ten non-repetitive ElectroStatic Discharge (ESD) pulses; see Figure 2.Table 6:Limiting valuesIn accordance with the Absolute Maximum Rating System (IEC 60134).Symbol Parameter Conditions Min Max Unit Per diode P PP peak pulse power 8/20µs [1][2]-130W I PP peak pulse current 8/20µs[1][2]-12A T j junction temperature -150°C T amb ambient temperature −65+150°C T stgstorage temperature−65+150°CTable 7:ESD maximum ratingsSymbol ParameterConditionsMin Max Unit ESDelectrostatic discharge capabilityIEC 61000-4-2 (contact discharge)[1][2]-30kV HBM MIL-Std 883-10kVTable 8:ESD standards complianceESD StandardConditionsIEC 61000-4-2, level 4 (ESD);Figure 2> 15 kV (air);> 8 kV (contact)HBM MIL-STD 883; class 3> 4 kVFig 1.8/20µs pulse waveform according toIEC 61000-4-5Fig 2.ElectroStatic Discharge (ESD) pulse waveformaccording to IEC 61000-4-210e −t20t (µs)I pp (%)401200408030mle218100 % I pp ; 8 µs50 % I pp ; 20 µs001aaa191I pp 100 %90 %t30 ns60 ns10 %t r = 0.7 to 1 ns6.Characteristics[1]Non-repetitive current pulse 8/20µs exponentially decaying waveform according to IEC61000-4-5; see Figure 1.[2]Measures from pin 1 to pin 2.Table 9:CharacteristicsT amb = 25°C unless otherwise specified.Symbol ParameterConditions Min Typ Max Unit Per diode V RWM reverse stand-off voltage --5V I RM reverse leakage current V RWM = 5 V;see Figure 6-5100nA V (CL)R clamping voltage I PP = 1 A [1][2]--10V I PP = 12 A [1][2]--14V V (BR)breakdown voltage I R = 1 mA 5.5-9.5V r dif differential resistance I R = 1 mA--50ΩC ddiode capacitanceV R = 0 V; f = 1 MHz;see Figure 5-3545pFT amb = 25°CFig 3.Peak pulse power dissipation as a function ofexponential time duration t p ; typical valuesFig 4.Relative variation of peak pulse power as afunction of junction temperature; typical valuesT amb = 25°C; f = 1 MHzFig 5.Diode capacitance as a function of reversevoltage; typical valuesFig 6.Relative variation of reverse leakage current asa function of junction temperature; typical values001aaa202t p (µs)110410310102102103P pp (W)10T j (°C)020015050100001aaa1930.40.81.2P ppP pp(25˚C)V R (V)54231001aaa20330263438C d (pF)22001aaa204T j (°C)7515012510010110210−1I RM(T j )I RM(T j =85°C)Fig 7.ESD clamping test set-up and waveforms006aaa05650 ΩR Z C ZPESD5V0S1Bxvertical scale = 200 V/div horizontal scale = 50 ns/div unclamped +1 kV ESD voltage waveform (IEC61000-4-2 network)clamped +1 kV ESD voltage waveform (IEC61000-4-2 network)unclamped −1 kV ESD voltage waveform (IEC61000-4-2 network)clamped −1 kV ESD voltage waveform (IEC61000-4-2 network)vertical scale = 10 V/div horizontal scale = 50 ns/divvertical scale = 200 V/div horizontal scale = 50 ns/divvertical scale = 10 V/div horizontal scale = 50 ns/divGNDGNDGNDGND450 ΩRG 223/U 50 Ω coaxESD TESTER4 GHz DIGITAL OSCILLOSCOPE10×ATTENUATORIEC 61000-4-2 network C Z = 150 pF; R Z = 330 Ω7.Application informationPESD5V0S1Bx series is designed for the protection of one bidirectional signal line fromthe damage caused by ElectroStatic Discharge(ESD)and surge pulses.The devices maybe used on lines where the signal polarities are above and below ground. They provide asurge capability of up to 130 W per line for a 8/20µs waveform.signal linePESD5V0S1BxGND006aaa057Fig 8.Bidirectional protection of one signal line.Circuit board layout and protection device placement:Circuit board layout is critical for the suppression of ESD, EFT and surge transients.The following guidelines are recommended:1.Place the protection device as close to the input terminal or connector as possible.2.The path length between the protection device and the protected line should beminimized.3.Keep parallel signal paths to a minimum.4.Avoid running protection conductors in parallel with unprotected conductor.5.Minimize all printed-circuit board conductive loops including power and ground loops.6.Minimize the length of the transient return path to ground.7.Avoid using shared transient return paths to a common ground point.8.Ground planes should be used whenever possible. For multilayer printed-circuitboards, use ground vias.8.Package outlineFig 9.Package outline SOD323 (SC-76)REFERENCESOUTLINE VERSION EUROPEAN PROJECTIONISSUE DATE IECJEDECJEITA SOD323SC-76SOD32399-09-1303-12-17Note1. The marking bar indicates the cathodeUNIT A mm0.051.10.80.400.250.250.101.81.61.351.152.72.30.450.15A 1max DIMENSIONS (mm are the original dimensions)Plastic surface mounted package; 2 leads01(1)21 2 mmscaleb pc D E H D Q 0.250.15L p v 0.2A D AEL pb pdetail XA 1cQH Dv AM XFig 10.Package outline SOD523 (SC-79)REFERENCESOUTLINE VERSION EUROPEAN PROJECTIONISSUE DATE IECJEDECJEITA SOD523SC-7998-11-2502-12-13Plastic surface mounted package; 2 leads SOD52300.5 1 mmscaleD 12H EEb pAcv M AAUNITb pc D E v mm A H E DIMENSIONS (mm are the original dimensions)Note1. The marking bar indicates the cathode.(1)0.340.260.170.110.10.850.751.251.150.650.581.651.55Fig 11.Package outline SOD882UNIT A 1max.A (1)b e 1L REFERENCESOUTLINE VERSION EUROPEAN PROJECTIONISSUE DATE IECJEDECJEITAmm0.500.460.550.470.030.620.550.65DIMENSIONS (mm are the original dimensions)Notes1. Including plating thickness2. The marking bar indicates the cathode0.300.22SOD88203-04-1603-04-17D E 1.020.95L E(2)21bA 1A DLLeadless ultra small plastic package; 2 terminals; body 1.0 x 0.6 x 0.5 mm SOD8820.5 1 mmscalee 19.Packing informationTable 10:Packing methodsThe indicated -xxx are the last three digits of the 12NC ordering code.[1]Type number Package Description Packing quantity300010000 PESD5V0S1BA SOD323 4 mm pitch, 8 mm tape and reel-115-135 PESD5V0S1BB SOD523 4 mm pitch, 8 mm tape and reel-115-135 PESD5V0S1BL SOD882 4 mm pitch, 8 mm tape and reel--315[1]For further information and the availability of packing methods, see Section14.10.Revision historyTable 11:Revision historyDocument ID Release date Data sheet status Change notice Doc. number SupersedesPESD5V0S1BA_BB_BL_320041217Product data sheet-9397 750 14036PESD5V0S1BA_BB_BL_2Modifications:•T able1 Product overview added•Figure1 Figure title amended•T able9 Symbol for differential resistance amended to r dif•Figure5 Axis description changed from V BR to V R and figure title amendedPESD5V0S1BA_BB_BL_220040802Product data sheet-9397 750 13514PESD5V0S1BA_1PESD5V0S1BB_1-9397 750 12256-PESD5V0S1BA_120040322ProductspecificationPESD5V0S1BB_120040304Product-9397 750 12257-specification11.Data sheet status[1]Please consult the most recently issued data sheet before initiating or completing a design.[2]The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL .[3]For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.12.DefinitionsShort-form specification —The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook.Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device.These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability.Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.13.DisclaimersLife support —These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application.Right to make changes —Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’),relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes noresponsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to theseproducts,and makes no representations or warranties that these products are free from patent,copyright,or mask work right infringement,unless otherwise specified.14.Contact informationFor additional information, please visit: For sales office addresses, send an email to:**********************************Level Data sheet status [1]Product status [2][3]DefinitionI Objective data Development This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice.IIPreliminary dataQualificationThis data sheet contains data from the preliminary specification.Supplementary data will be published at a later date.Philips Semiconductors reserves the right to change the specification without notice,in order to improve the design and supply the best possible product.III Product data ProductionThis data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design,manufacturing and supply.Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN).15.Contents1Product profile. . . . . . . . . . . . . . . . . . . . . . . . . . 11.1General description. . . . . . . . . . . . . . . . . . . . . . 11.2Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.3Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.4Quick reference data. . . . . . . . . . . . . . . . . . . . . 12Pinning information. . . . . . . . . . . . . . . . . . . . . . 23Ordering information. . . . . . . . . . . . . . . . . . . . . 24Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 36Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 57Application information. . . . . . . . . . . . . . . . . . . 88Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 99Packing information. . . . . . . . . . . . . . . . . . . . . 1210Revision history. . . . . . . . . . . . . . . . . . . . . . . . 1311Data sheet status. . . . . . . . . . . . . . . . . . . . . . . 1412Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1413Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1414Contact information . . . . . . . . . . . . . . . . . . . . 14© Koninklijke Philips Electronics N.V.2004All rights are reserved.Reproduction in whole or in part is prohibited without the priorwritten consent of the copyright owner.The information presented in this document doesnot form part of any quotation or contract,is believed to be accurate and reliable and maybe changed without notice.No liability will be accepted by the publisher for anyconsequence of its use.Publication thereof does not convey nor imply any license underpatent- or other industrial or intellectual property rights.Date of release: 17 December 2004Document number: 9397 750 14036。

MASTER - LED HID SON-TMAS LED SON-T IF 3.6Klm 23W 727 E27Philips MASTER - LED HID SON-T lamps are an easy LED solution with a short payback period to replace High-Intensity Discharge (HID) and High-Pressure Sodium (SON) lamps. MASTER – LED HID SON-T solutions bring the energyefficiency and long lifetime benefits of LED to HID replacement, providing instant savings for a low initial investment. With the right lamp size and light distribution,you can easily retrofit MASTER – LED HID SON-T lamps into existing SON and SON-T systems, enhancing the lighting quality with LED without changing the luminaire’s ballast (for IF replacements) or reflector.Warnings and Safety•Please refer to the installation guide or consult a Philips Lighting representative for the wiring diagram and instructions.Product dataGeneral InformationCap-Base E27 [E27]Nominal lifetime 70,000 hour(s)Switching Cycle 50,000Lighting Technology LED EU RoHS compliantYes Flux measurement referenceSphereLight TechnicalColor Code 727 [CCT of 2700K]Luminous Flux 3,600 lmColor DesignationWarm White (WW)Correlated Color Temperature (Nom)2700 K Luminous Efficacy (rated) (Nom)156 lm/WColor Consistency<6Color rendering index (CRI)70LLMF At End Of Nominal Lifetime (Nom)70 %Photobiological safety according to EN 62471RG1Operating and ElectricalLine Frequency 50 Hz Input Frequency 50 Hz Power Consumption23 W Lamp Current (Nom)775 mA Starting Time (Nom)0.5 s Warm-up time to 60% light 0.5 s Power Factor (Fraction)-Voltage (Nom)48-58 VLightingMax. lamp no. on MCB B type 10A - Mains -Max. lamp no. on MCB B type 10A – EM ballast without Comp. Cap.9Max. lamp no. on MCB B type 10A – EM ballast with Comp. Cap.14Max. lamp no. on MCB B type 16A - Mains -Max. lamp no. on MCB B type 16A – EM ballast without Comp. Cap.14Max. lamp no. on MCB B type 16A – EM ballast with Comp. Cap.22TemperatureAmbient temperature range -30 to +45 °C T-Case Maximum (Nom)46 °CControls and DimmingDimmableNoMechanical and HousingBulb Finish Clear Bulb MaterialGlassBulb Shape T60 [T 60mm]Approval and ApplicationEnergy Efficiency ClassD Energy Consumption kWh/1000 h23 kWh EPREL Registration Number1077800Product DataOrder product nameMAS LED SON-T IF 3.6Klm 23W 727E27Full product nameMAS LED SON-T IF 3.6Klm 23W 727E27Full product code 871951444887200Order code 929003467012Material Nr. (12NC)929003467012Numerator - Quantity Per Pack1EAN/UPC - Product/Case 8719514448872Numerator - Packs per outer box 6EAN/UPC - Case8719514448889Dimensional drawingPhotometric data040802060100[nm]I n t e n s i t y (%Spectral Power Distribution Colour General uniform lighting - MAS LED SON-T IF 3.6Klm 23W 727 E27080000600002000040000Time (hours)100000 Life Expectancy Diagram - MAS LED SON-T IF 3.6Klm 23W 727 E27Lumenin%Burning hours 5080706090100080000600002000040000100000 Lumen Maintenance Diagram - MAS LED SON-T IF 3.6Klm 23W 727 E27© 2023 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The。

/forum-58-1.html//board/tlist.aspx?bid=697218/HTML/2009/6/6/News-76802.html/qcyp/flsq/part707/0708/469907.html/07dq_qy/web/HID/HID1.htm什么是氙气灯氙气灯是一和含有氙气的新型大灯，又称高强度放电式气体灯，英文简称HID Intensity DischargeLamp.氙气灯打破了爱迪生发明的钨丝发光原理，在石英灯管内填充高压惰性气体— Xenon 氙气，取代传统的灯丝，在两段电极上有水银和碳素化合物，透过安定器以 23000 伏高压电流刺激氙气发光，在两极间形成完美的白色电弧，发出的光接近非常完美完美的太阳光。

氙气灯（ HID ）的发光原理汽车 HID 氙气灯与传统卤素灯不同，这是一种高压放电灯，它的发光原理是利用正负电刺激氙气与稀有金属化学反应发光，因此灯管内有一颗小小的玻璃球，这其中就是灌满了氙气及少许稀有金属，只要用电流去刺激它们进行化学反应，两者就会发出高达 4000K-12000K 色温度的光芒。

它采用一个特制的镇流器，利用汽车电池12V 电压产生 23000V 以上的触发电压使灯启动。

启动时0.8 秒的亮度是额定亮度的 20% ，达到卤素灯的亮度，并使大灯 4 秒以内达到额定亮度的 80% 以上。

在灯稳定后镇流器向灯提供约 80V 供电电压保持灯以恒定功率运转。

氙气灯（ HID ）的性能优点1、一般的 55W 卤素灯只能产生 1000 流明的光，而 35W 氙气灯能产生3200 流明的强光，亮度提升 300% ，拥有超长及超广角的宽广视野，为你带来前所未有的驾车舒适感；让夜晚不再黑暗，视野更清晰，可大大减少行车事故率。

2、 HID 氙气灯是利用电子激发气体发光，并无钨丝存在，因此寿命较长，约为 3000 小时，大幅度超越汽车夜间行驶的总时数。

而卤素灯只有250 小时。

深圳英士康科技有限公司深圳南山区侨香路美景工业苑2号6楼电话: +86 755 28721662 / 28721663传真: +86 755 84170408E-mail:***************/HID 电子镇流器规格书HID BALLAST SPECIFICATION金属卤素灯模拟调光型EAMH250AD-EUVersion ASHENZHEN EASCA TECHNOLOGIES LIMITEDF6, No.2, MeiJing Industrial Park, QiaoXiang Road, NanShan district, Shenzhen, ChinaTel: +86 755 28721662 28721663 Fax: +86 755 84170408E-mail:***************EAMH250AD-EU ver A ◎技术参数 (Technique Specifications)输入电压:Voltage input range: 170Vac～260Vac开路保护:Protection of open circuit:有Available额定电压:Rating input voltage: 220Vac过热保护:Protection of thermal:有Available输入频率:Input frequency: 50Hz～60Hz触发失败保护:Protection of ignition failure:有Available功率因数: Power factor: > 0.99灯失效保护:Protection of end of lamp life:有Available效率: Efficiency: 95% (Max)重量:Weight:1.8 kg谐波含量: THD < 10%灯管到镇流器最大距离:Max. Lamp distance from ballast :15m输出功率: Output power: 250 W工作温度:Operating temperature range:-40℃～+60℃调光: Dimming: 模拟调光Analog Dimming 0-10v尺寸(L X W X H):Dimension (L X W X H):234.5x102x68.4mm电流波峰因素: Current crest factor: < 1.7最大外壳温度(TC):Max case temperature (TC):85℃输出频率:Output frequency : 100Hz安规标准:Safety and regulation:IEC61347短路保护:Protection of short circuit: 有Available电磁兼容:EMC:EN55015◎ 产品特性 (Product Speciality)◎ 安装图(Mounting Drawing)●进口铝合金外壳，超光氧化处理，具优良散热性●内部采用三防漆处理和特种散热胶灌封，更适于恶劣环境●使用于多种金卤灯光源，如GE，欧斯朗，飞利浦，BLV等及国产多种欧标光源●噪音低，光输出稳定无屏闪现象，具多种自我保护功能●效率高，综合节电30%以上●广泛应用于路桥、广告牌、建筑及景观照明领域●Bright aluminium alloy case with perfect thermal efficiency●Internally double protected by conformal coating and coolingcolloid that ensures ballast work well in various environment●Compliant to most MH lamp brands such as GE, OSRAM,PHILIPS, BLV etc…with EU standard●Low noise, stable lumen output, no flicker, and multipleself-protection functions●High efficiency that saves more than 30%●Applying to road, bridge, billboard, building, sight lighting etc...EAMH250AD-EU version A 说明：1、安装前请仔细阅读本说明。