SN65C3222PWE4中文资料

玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理玉林万顺达电脑芯片级维修资料 2010-07-20整理。

元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. To minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2003, Texas Instruments Incorporated。

R8C/26 Group, R8C/27 GroupSINGLE-CHIP 16-BIT CMOS MCU1.OverviewThese MCUs are fabricated using a high-performance silicon gate CMOS process, embedding the R8C/Tiny Series CPU core, and are packaged in a 32-pin molded-plastic LQFP. It implements sophisticated instructions for a high level of instruction efficiency. With 1 Mbyte of address space, they are capable of executing instructions at high speed.Furthermore, the R8C/27 Group has on-chip data flash (1 KB × 2 blocks).The difference between the R8C/26 Group and R8C/27 Group is only the presence or absence of data flash.Their peripheral functions are the same.1.1ApplicationsElectronic household appliances, office equipment, audio equipment, consumer products, automotive, etc.REJ03B0168-0130Rev.1.30May 25, 2007J and K versions are under development. Specifications may be changed without prior notice.1.2Performance OverviewTable 1.1 outlines the Functions and Specifications for R8C/26Group and Table 1.2 outlines the Functions and Specifications for R8C/27 Group.NOTES:1.I 2C bus is a trademark of Koninklijke Philips Electronics N. V.2.Specify the D, K version if D, K version functions are to be used.Table 1.1Functions and Specifications for R8C/26GroupItemSpecificationCPUNumber of fundamental instructions89 instructionsMinimum instruction execution time 50 ns (f(XIN) = 20 MHz, VCC = 3.0 to 5.5 V) (other than K version)62.5 ns (f(XIN) = 16 MHz, VCC = 3.0 to 5.5 V) (K version)100 ns (f(XIN) = 10 MHz, VCC = 2.7 to 5.5 V)200 ns (f(XIN) = 5 MHz, VCC = 2.2 to 5.5 V) (N, D version)Operating mode Single-chip Address space 1 MbyteMemory capacity Refer to Table 1.3 Product Information for R8C/26 Group Peripheral FunctionsPortsI/O ports: 25 pins, Input port: 3 pins LED drive ports I/O ports: 8 pins (N, D version)TimersTimer RA: 8 bits × 1 channel Timer RB: 8 bits × 1 channel(Each timer equipped with 8-bit prescaler)Timer RC: 16 bits × 1 channel(Input capture and output compare circuits)Timer RE: With real-time clock and compare match function(For J, K version, compare match function only.)Serial interfaces 2 channels (UART0, UART1)Clock synchronous serial I/O, UART Clock synchronous serial interface 1 channelI 2C bus Interface (1)Clock synchronous serial I/O with chip select LIN module Hardware LIN: 1 channel (timer RA, UART0)A/D converter 10-bit A/D converter: 1 circuit, 12 channels Watchdog timer 15 bits × 1 channel (with prescaler)Start-on-reset selectableInterrupts Internal: 15 sources, External: 4 sources, Software: 4 sources, Priority levels: 7 levels Clock generation circuits3 circuits•XIN clock generation circuit (with on-chip feedback resistor)•On-chip oscillator (high speed, low speed)High-speed on-chip oscillator has a frequency adjustment function •XCIN clock generation circuit (32 kHz) (N, D version)•Real-time clock (timer RE) (N, D version)Oscillation-stopped detectorXIN clock oscillation stop detection function Voltage detection circuitOn-chipPower-on reset circuit On-chipElectricalCharacteristicsSupply voltageVCC = 3.0 to 5.5 V (f(XIN) = 20 MHz) (other than K version)VCC = 3.0 to 5.5 V (f(XIN) = 16 MHz) (K version)VCC = 2.7 to 5.5 V (f(XIN) = 10 MHz)VCC = 2.2 to 5.5 V (f(XIN) = 5 MHz) (N, D version)Current consumption (N, D version)Typ. 10 mA (VCC = 5.0 V, f(XIN) = 20 MHz)Typ. 6 mA (VCC = 3.0 V, f(XIN) = 10 MHz)Typ. 2.0 µA (VCC = 3.0 V, wait mode (f(XCIN) = 32 kHz)Typ. 0.7 µA (VCC = 3.0 V, stop mode)Flash MemoryProgramming and erasure voltage VCC = 2.7 to 5.5 V Programming and erasure endurance100 timesOperating Ambient Temperature-20 to 85°C (N version)-40 to 85°C (D, J version)(2), -40 to 125°C (K version)(2)Package 32-pin molded-plastic LQFPNOTES:1.I 2C bus is a trademark of Koninklijke Philips Electronics N. V.2.Specify the D, K version if D, K version functions are to be used.Table 1.2Functions and Specifications for R8C/27 GroupItem SpecificationCPU Number of fundamental instructions89 instructionsMinimum instruction execution time 50 ns (f(XIN) = 20 MHz, VCC = 3.0 to 5.5 V) (other than K version)62.5 ns (f(XIN) = 16 MHz, VCC = 3.0 to 5.5 V) (K version)100 ns (f(XIN) = 10 MHz, VCC = 2.7 to 5.5 V)200 ns (f(XIN) = 5 MHz, VCC = 2.2 to 5.5 V) (N, D version)Operating mode Single-chip Address space 1 Mbyte Memory capacity Refer to Table 1.4 Product Information of R8C/27 GroupPeripheral Functions Ports I/O ports: 25 pins, Input port: 3 pins LED drive ports I/O ports: 8 pins (N, D version)Timers Timer RA: 8 bits × 1 channelTimer RB: 8 bits × 1 channel(Each timer equipped with 8-bit prescaler)Timer RC: 16 bits × 1 channel(Input capture and output compare circuits)Timer RE: With real-time clock and compare match function(For J, K version, compare match function only.)Serial interfaces 2 channels (UART0, UART1)Clock synchronous serial I/O, UARTClock synchronous serial interface 1 channel I 2C bus Interface (1)Clock synchronous serial I/O with chip selectLIN module Hardware LIN: 1 channel (timer RA, UART0)A/D converter 10-bit A/D converter: 1 circuit, 12 channels Watchdog timer 15 bits × 1 channel (with prescaler)Start-on-reset selectableInterrupts Internal: 15 sources, External: 4 sources,Software: 4 sources, Priority levels: 7 levelsClock generation circuits 3 circuits •XIN clock generation circuit (with on-chip feedback resistor)•On-chip oscillator (high speed, low speed)High-speed on-chip oscillator has a frequency adjustment function •XCIN clock generation circuit (32 kHz) (N, D version)•Real-time clock (timer RE) (N, D version)Oscillation-stopped detectorXIN clock oscillation stop detection function Voltage detection circuit On-chip Power-on reset circuit On-chipElectrical Characteristics Supply voltage VCC = 3.0 to 5.5 V (f(XIN) = 20 MHz) (other than K version)VCC = 3.0 to 5.5 V (f(XIN) = 16 MHz) (K version)VCC = 2.7 to 5.5 V (f(XIN) = 10 MHz)VCC = 2.2 to 5.5 V (f(XIN) = 5 MHz) (N, D version)Current consumption (N, D version)Typ. 10 mA (VCC = 5.0 V, f(XIN) = 20 MHz)Typ. 6 mA (VCC = 3.0 V, f(XIN) = 10 MHz)Typ. 2.0 µA (VCC = 3.0 V, wait mode (f(XCIN) = 32 kHz)Typ. 0.7 µA (VCC = 3.0 V, stop mode)Flash Memory Programming and erasure voltage VCC = 2.7 to 5.5 VProgramming and erasure endurance 10,000 times (data flash)1,000 times (program ROM)Operating Ambient Temperature -20 to 85°C (N version)-40 to 85°C (D, J version)(2), -40 to 125°C (K version)(2)Package 32-pin molded-plastic LQFP1.3 Block DiagramFigure 1.1 shows a Block Diagram.1.4Product InformationTable 1.3 lists Product Information for R8C/26 Group and Table 1.4 lists Product Information for R8C/27 Group.(D): Under development NOTES:1.These versions are under development. Specifications may be changed without prior notice.2.The user ROM is programmed before shipment.Table 1.3Product Information for R8C/26 Group Current of May. 2007 Part No.ROM Capacity RAM Capacity Package Type RemarksR5F21262SNFP 8 Kbytes 512 bytes PLQP0032GB-A N versionR5F21264SNFP 16 Kbytes 1 Kbyte PLQP0032GB-A R5F21265SNFP 24 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21266SNFP 32 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21262SDFP 8 Kbytes 512 bytes PLQP0032GB-A D versionR5F21264SDFP 16 Kbytes 1 Kbyte PLQP0032GB-A R5F21265SDFP 24 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21266SDFP 32 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21264JFP (D)16 Kbytes 1 Kbyte PLQP0032GB-A J version (1)R5F21266JFP (D)32 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21264KFP (D)16 Kbytes 1 Kbyte PLQP0032GB-A K version (1)R5F21266KFP (D)32 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21262SNXXXFP (D) 8 Kbytes 512 bytes PLQP0032GB-A N version (1)Factoryprogramming product (2)R5F21264SNXXXFP (D)16 Kbytes 1 Kbyte PLQP0032GB-A R5F21265SNXXXFP (D)24 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21266SNXXXFP (D)32 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21262SDXXXFP (D) 8 Kbytes 512 bytes PLQP0032GB-A D version (1)R5F21264SDXXXFP (D)16 Kbytes 1 Kbyte PLQP0032GB-A R5F21265SDXXXFP (D)24 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21266SDXXXFP (D)32 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21264JXXXFP (D)16 Kbytes 1 Kbyte PLQP0032GB-A J version (1)R5F21266JXXXFP (D)32 Kbytes 1.5 Kbytes PLQP0032GB-A R5F21264KXXXFP (D)16 Kbytes 1 Kbyte PLQP0032GB-A K version (1)R5F21266KXXXFP (D)32 Kbytes1.5 KbytesPLQP0032GB-A(D): Under development NOTES:1.These versions are under development. Specifications may be changed without prior notice.2.The user ROM is programmed before shipment.Table 1.4Product Information for R8C/27 GroupCurrent of May. 2007Part No.ROM Capacity RAM Capacity Package Type RemarksProgramROMData flashR5F21272SNFP 8 Kbytes 1 Kbyte × 2512 bytes PLQP0032GB-A N versionR5F21274SNFP 16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0032GB-A R5F21275SNFP 24 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21276SNFP 32 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21272SDFP 8 Kbytes 1 Kbyte × 2512 bytes PLQP0032GB-A D versionR5F21274SDFP 16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0032GB-A R5F21275SDFP 24 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21276SDFP 32 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21274JFP (D)16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0032GB-A J version (1)R5F21276JFP (D)32 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21274KFP (D)16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0032GB-A K version (1)R5F21276KFP (D)32 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21272SNXXXFP (D) 8 Kbytes 1 Kbyte × 2512 bytes PLQP0032GB-A N version (1)Factoryprogramming product (2)R5F21274SNXXXFP (D)16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0032GB-A R5F21275SNXXXFP (D)24 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21276SNXXXFP (D)32 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21272SDXXXFP (D) 8 Kbytes 1 Kbyte × 2512 bytes PLQP0032GB-A D version (1)R5F21274SDXXXFP (D)16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0032GB-A R5F21275SDXXXFP (D)24 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21276SDXXXFP (D)32 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21274JXXXFP (D)16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0032GB-A J version (1)R5F21276JXXXFP (D)32 Kbytes 1 Kbyte × 2 1.5 Kbytes PLQP0032GB-A R5F21274KXXXFP (D)16 Kbytes 1 Kbyte × 2 1 Kbyte PLQP0032GB-A K version (1)R5F21276KXXXFP (D)32 Kbytes 1 Kbyte × 21.5 KbytesPLQP0032GB-A1.5Pin AssignmentsFigure 1.4 shows Pin Assignments (Top View).1.6Pin FunctionsTable 1.5 lists Pin Functions.I: InputO: OutputI/O: Input and outputTable 1.5Pin FunctionsTypeSymbolI/O TypeDescriptionPower supply input VCC, VSS I Apply 2.2 V to 5.5 V (J, K version are 2.7 V to 5.5 V) to the VCC pin. Apply 0 V to the VSS pin.Analog power supply input AVCC, AVSS I Power supply for the A/D converter.Connect a capacitor between AVCC and AVSS.Reset input RESET I Input “L” on this pin resets the MCU.MODE MODE I Connect this pin to VCC via a resistor.XIN clock input XIN I These pins are provided for XIN clock generation circuit I/O.Connect a ceramic resonator or a crystal oscillator between the XIN and XOUT pins. To use an external clock, input it to the XIN pin and leave the XOUT pin open.XIN clock output XOUT O XCIN clock input (N, D version)XCIN I These pins are provided for XCIN clock generation circuit I/O.Connect a crystal oscillator between the XCIN and XCOUT pins. To use an external clock, input it to the XCIN pin and leave the XCOUT pin open.XCIN clock output (N, D version)XCOUTO INT interrupt input INT0, INT1, INT3I INT interrupt input pins Key input interrupt KI0 to KI3I Key input interrupt input pins Timer RA TRAO O Timer RA output pin TRAIO I/O Timer RA I/O pin Timer RB TRBO O Timer RB output pin Timer RCTRCCLK I External clock input pin TRCTRGI External trigger input pinTRCIOA, TRCIOB, TRCIOC, TRCIODI/O Sharing output-compare output / input-capture input / PWM / PWM2 output pins Timer RE TREO O Timer RE output pin Serial interfaceCLK0, CLK1I/O Clock I/O pinRXD0, RXD1I Receive data input pin TXD0, TXD1O Transmit data output pin I 2C bus interfaceSCL I/O Clock I/O pin SDAI/O Data I/O pin Clock synchronous serial I/O with chip selectSSI I/O Data I/O pinSCS I/O Chip-select signal I/O pin SSCKI/O Clock I/O pin SSOI/O Data I/O pinReference voltage input VREF I Reference voltage input pin to A/D converter A/D converter AN0 to AN11I Analog input pins to A/D converterI/O portP0_0 to P0_7, P1_0 to P1_7, P3_1, P3_3 to P3_7,P4_5,P5_3, P5_4I/OCMOS I/O ports. Each port has an I/O select direction register,allowing each pin in the port to be directed for input or output individually.Any port set to input can be set to use a pull-up resistor or not by a program.P1_0 to P1_7 also function as LED drive ports. (N, D version)Input port P4_2, P4_6, P4_7IInput-only portsR8C/26 Group, R8C/27 Group1. OverviewNOTES:1.This can be assigned to the pin in parentheses by a program.2.XCIN, XCOUT can be used only for N or D version.Table 1.6Pin Name Information by Pin NumberPin Number Control Pin PortI/O Pin Functions for of Peripheral ModulesInterruptTimerSerial Interface ClockSynchronous Serial I/O with Chip Select I 2C busInterface A/D Converter1P3_5(TRCIOD)(1)SSCK SCL 2P3_7TRAO RXD1/(TXD1)(1)SSO3RESET 4XOUT/XCOUT (2)P4_75VSS/AVSS 6XIN/XCIN (2)P4_67VCC/AVCC 8MODE9P4_5INT0(RXD1)(1)10P1_7INT1TRAIO11P3_6(INT1)(1)(TXD1)/(RXD1)(1)12P3_1TRBO 13P5_4TRCIOD 14P5_3TRCIOC 15P1_6CLK0(SSI)(1)16P1_5(INT1)(1)(TRAIO)(1)RXD017P1_4TXD018P1_3KI3(TRBO)AN1119P1_2KI2TRCIOB AN1020VRFFP4_221P1_1KI1TRCIOA/TRCTRGAN922P1_0KI0AN823P3_3INT3TRCCLK SSI 24P3_4(TRCIOC)(1)SCSSDA25P0_7AN026P0_6AN127P0_5CLK1AN228P0_4TREOAN329P0_3AN430P0_2AN531P0_1AN632P0_0(TXD1)(1)AN72.Central Processing Unit (CPU)Figure 2.1 shows the CPU Registers. The CPU contains 13 registers. R0, R1, R2, R3, A0, A1, and FB configure a register bank. There are two sets of register bank.2.1Data Registers (R0, R1, R2, and R3)R0 is a 16-bit register for transfer, arithmetic, and logic operations. The same applies to R1 to R3. R0 can be split into high-order bits (R0H) and low-order bits (R0L) to be used separately as 8-bit data registers. R1H and R1L are analogous to R0H and R0L. R2 can be combined with R0 and used as a 32-bit data register (R2R0). R3R1 is analogous to R2R0.2.2Address Registers (A0 and A1)A0 is a 16-bit register for address register indirect addressing and address register relative addressing. It is also used for transfer, arithmetic, and logic operations. A1 is analogous to A0. A1 can be combined with A0 to be used as a 32-bit address register (A1A0).2.3Frame Base Register (FB)FB is a 16-bit register for FB relative addressing.2.4Interrupt Table Register (INTB)INTB is a 20-bit register that indicates the start address of an interrupt vector table.2.5Program Counter (PC)PC is 20 bits wide and indicates the address of the next instruction to be executed.2.6User Stack Pointer (USP) and Interrupt Stack Pointer (ISP)The stack pointers (SP), USP, and ISP, are each 16 bits wide. The U flag of FLG is used to switch betweenUSP and ISP.2.7Static Base Register (SB)SB is a 16-bit register for SB relative addressing.2.8Flag Register (FLG)FLG is an 11-bit register indicating the CPU state.2.8.1Carry Flag (C)The C flag retains carry, borrow, or shift-out bits that have been generated by the arithmetic and logic unit.2.8.2Debug Flag (D)The D flag is for debugging only. Set it to 0.2.8.3Zero Flag (Z)The Z flag is set to 1 when an arithmetic operation results in 0; otherwise to 0.2.8.4Sign Flag (S)The S flag is set to 1 when an arithmetic operation results in a negative value; otherwise to 0.2.8.5Register Bank Select Flag (B)Register bank 0 is selected when the B flag is 0. Register bank 1 is selected when this flag is set to 1.2.8.6Overflow Flag (O)The O flag is set to 1 when an operation results in an overflow; otherwise to 0.2.8.7Interrupt Enable Flag (I)The I flag enables maskable interrupts.Interrupt are disabled when the I flag is set to 0, and are enabled when the I flag is set to 1. The I flag is set to 0 when an interrupt request is acknowledged.2.8.8Stack Pointer Select Flag (U)ISP is selected when the U flag is set to 0; USP is selected when the U flag is set to 1.The U flag is set to 0 when a hardware interrupt request is acknowledged or the INT instruction of software interrupt numbers 0 to 31 is executed.2.8.9Processor Interrupt Priority Level (IPL)IPL is 3 bits wide and assigns processor interrupt priority levels from level 0 to level 7.If a requested interrupt has higher priority than IPL, the interrupt is enabled.2.8.10Reserved BitIf necessary, set to 0. When read, the content is undefined.3.Memory3.1R8C/26 GroupFigure 3.1 is a Memory Map of R8C/26 Group. The R8C/26 group has 1 Mbyte of address space from addresses 00000h to FFFFFh.The internal ROM is allocated lower addresses, beginning with address 0FFFFh. For example, a 16-Kbyte internal ROM area is allocated addresses 0C000h to 0FFFFh.The fixed interrupt vector table is allocated addresses 0FFDCh to 0FFFFh. They store the starting address of each interrupt routine.The internal RAM is allocated higher addresses beginning with address 00400h. For example, a 1-Kbyte internal RAM area is allocated addresses 00400h to 007FFh. The internal RAM is used not only for storing data but also for calling subroutines and as stacks when interrupt requests are acknowledged.Special function registers (SFRs) are allocated addresses 00000h to 002FFh. The peripheral function control registers are allocated here. All addresses within the SFR, which have nothing allocated are reserved for future use and cannot be accessed by users.3.2R8C/27 GroupFigure 3.2 is a Memory Map of R8C/27 Group. The R8C/27 group has 1 Mbyte of address space from addresses 00000h to FFFFFh.The internal ROM (program ROM) is allocated lower addresses, beginning with address 0FFFFh. For example, a 16-Kbyte internal ROM area is allocated addresses 0C000h to 0FFFFh.The fixed interrupt vector table is allocated addresses 0FFDCh to 0FFFFh. They store the starting address of each interrupt routine.The internal ROM (data flash) is allocated addresses 02400h to 02BFFh.The internal RAM area is allocated higher addresses, beginning with address 00400h. For example, a 1-Kbyte internal RAM is allocated addresses 00400h to 007FFh. The internal RAM is used not only for storing data but also for calling subroutines and as stacks when interrupt requests are acknowledged.Special function registers (SFRs) are allocated addresses 00000h to 002FFh. The peripheral function control registers are allocated here. All addresses within the SFR, which have nothing allocated are reserved for future use and cannot be accessed by users.4.Special Function Registers (SFRs)An SFR (special function register) is a control register for a peripheral function. Tables 4.1 to 4.7 list the special function registers.Table 4.1SFR Information (1)(1)X: Undefined NOTES:1.The blank regions are reserved. Do not access locations in these regions.2.The CSPROINI bit in the OFS register is set to 0.3.In J, K version these regions are reserved. Do not access locations in these regions.Address RegisterSymbolAfter reset0000h 0001h 0002h 0003h 0004h Processor Mode Register 0PM000h 0005h Processor Mode Register 1PM100h0006h System Clock Control Register 0CM001101000b 0007h System Clock Control Register 1CM100100000b0008h 0009h 000Ah Protect RegisterPRCR 00h 000Bh 000Ch Oscillation Stop Detection Register OCD 00000100b 000Dh Watchdog Timer Reset Register WDTR XXh 000Eh Watchdog Timer Start Register WDTS XXh000Fh Watchdog Timer Control Register WDC 00X11111b 0010h Address Match Interrupt Register 0RMAD000h 0011h 00h 0012h 00h 0013h Address Match Interrupt Enable Register AIER 00h 0014h Address Match Interrupt Register 1RMAD100h 0015h 00h 0016h 00h0017h 0018h 0019h 001Ah 001Bh 001ChCount Source Protection Mode Register CSPR00h10000000b (2)001Dh 001Eh 001Fh 0020h 0021h 0022h 0023h High-Speed On-Chip Oscillator Control Register 0FRA000h0024h High-Speed On-Chip Oscillator Control Register 1FRA1When shipping 0025h High-Speed On-Chip Oscillator Control Register 2FRA200h0026h 0027h 0028h Clock Prescaler Reset Flag CPSRF 00h0029h High-Speed On-Chip Oscillator Control Register 4(3)FRA4When shipping 002Ah 002Bh High-Speed On-Chip Oscillator Control Register 6(3)FRA6When shipping002Ch 002Dh 002Eh 002FhTable 4.2SFR Information (2)(1)X: Undefined NOTES:1.The blank regions are reserved. Do not access locations in these regions.2.(N, D version) Software reset, watchdog timer reset, voltage monitor 1 reset, or voltage monitor 2 reset do not affect this register.(J, K version) Software reset, watchdog timer reset, or voltage monitor 2 reset do not affect this register.3.The LVD0ON bit in the OFS register is set to 1 and hardware reset.4.Power-on reset, voltage monitor 0 reset or the LVD0ON bit in the OFS register is set to 0, and hardware reset.5.(N, D version) Software reset, watchdog timer reset, voltage monitor 1 reset, or voltage monitor 2 reset do not affect b2 and b3.(J, K version) Software reset, watchdog timer reset, or voltage monitor 2 reset do not affect b2 and b3.6.(N, D version) Software reset, watchdog timer reset, voltage monitor 1 reset, or voltage monitor 2 reset do not affect this register.(J, K version) These regions are reserved. Do not access locations in these regions.7.The LVD1ON bit in the OFS register is set to 1 and hardware reset.8.Power-on reset, voltage monitor 1 reset, or the LVD1ON bit in the OFS register is set to 0 and hardware reset.9.Selected by the IICSEL bit in the PMR register.Address RegisterSymbolAfter reset0030h 0031h Voltage Detection Register 1 (2)VCA100001000b0032hVoltage Detection Register 2 (2)VCA2•N, Dversion 00h (3)00100000b (4)•J, K version 00h (7)01000000b (8)0033h 0034h 0035h 0036hVoltage Monitor 1 Circuit Control Register (5)VW1C•N, D version 00001000b •J, K version 0000X000b (7)0100X000b (8)0037h Voltage Monitor 2 Circuit Control Register (5)VW2C 00h0038h Voltage Monitor 0 Circuit Control Register (6)VW0C0000X000b (3)0100X001b (4)0039h 003Fh 0040h 0041h 0042h 0043h 0044h 0045h 0046h 0047h Timer RC Interrupt Control Register TRCIC XXXXX000b0048h 0049h 004Ah Timer RE Interrupt Control Register TREIC XXXXX000b004Bh 004Ch 004Dh Key Input Interrupt Control RegisterKUPIC XXXXX000b 004Eh A/D Conversion Interrupt Control Register ADICXXXXX000b 004Fh SSU / IIC Interrupt Control Register (9)SSUIC / IICIC XXXXX000b 0050h 0051h UART0 Transmit Interrupt Control Register S0TIC XXXXX000b 0052h UART0 Receive Interrupt Control Register S0RIC XXXXX000b 0053h UART1 Transmit Interrupt Control Register S1TIC XXXXX000b 0054h UART1 Receive Interrupt Control Register S1RIC XXXXX000b 0055h 0056h Timer RA Interrupt Control Register TRAIC XXXXX000b 0057h 0058h Timer RB Interrupt Control Register TRBIC XXXXX000b 0059h INT1 Interrupt Control Register INT1IC XX00X000b 005Ah INT3 Interrupt Control RegisterINT3ICXX00X000b005Bh 005Ch 005Dh INT0 Interrupt Control Register INT0IC XX00X000b005Eh 005Fh 0060h 006Fh 0070h 007FhTable 4.3SFR Information (3)(1)Address Register Symbol After reset 0080h0081h0082h0083h0084h0085h0086h0087h0088h0089h008Ah008Bh008Ch008Dh008Eh008Fh0090h0091h0092h0093h0094h0095h0096h0097h0098h0099h009Ah009Bh009Ch009Dh009Eh009Fh00A0h UART0 Transmit/Receive Mode Register U0MR00h00A1h UART0 Bit Rate Register U0BRG XXh00A2h UART0 Transmit Buffer Register U0TB XXh00A3h XXh00A4h UART0 Transmit/Receive Control Register 0U0C000001000b 00A5h UART0 Transmit/Receive Control Register 1U0C100000010b 00A6h UART0 Receive Buffer Register U0RB XXh00A7h XXh00A8h UART1 Transmit/Receive Mode Register U1MR00h00A9h UART1 Bit Rate Register U1BRG XXh00AAh UART1 Transmit Buffer Register U1TB XXh00ABh XXh00ACh UART1 Transmit/Receive Control Register 0U1C000001000b 00ADh UART1 Transmit/Receive Control Register 1U1C100000010b 00AEh UART1 Receive Buffer Register U1RB XXh00AFh XXh00B0h00B1h00B2h00B3h00B4h00B5h00B6h00B7h00B8h SS Control Register H / IIC bus Control Register 1(2)SSCRH / ICCR100h00B9h SS Control Register L / IIC bus Control Register 2(2)SSCRL / ICCR201111101b 00BAh SS Mode Register / IIC bus Mode Register(2)SSMR / ICMR00011000b 00BBh SS Enable Register / IIC bus Interrupt Enable Register(2)SSER / ICIER00h00BCh SS Status Register / IIC bus Status Register(2)SSSR / ICSR00h / 0000X000b 00BDh SS Mode Register 2 / Slave Address Register(2)SSMR2 / SAR00h00BEh SS Transmit Data Register / IIC bus Transmit Data Register(2)SSTDR / ICDRT FFh00BFh SS Receive Data Register / IIC bus Receive Data Register(2)SSRDR / ICDRR FFhX: UndefinedNOTES:1.The blank regions are reserved. Do not access locations in these regions.2.Selected by the IICSEL bit in the PMR register.Table 4.4SFR Information (4)(1)Address Register Symbol After reset 00C0h A/D Register AD XXh00C1h XXh00C2h00C3h00C4h00C5h00C6h00C7h00C8h00C9h00CAh00CBh00CCh00CDh00CEh00CFh00D0h00D1h00D2h00D3h00D4h A/D Control Register 2ADCON200h00D5h00D6h A/D Control Register 0ADCON000h00D7h A/D Control Register 1ADCON100h00D8h00D9h00DAh00DBh00DCh00DDh00DEh00DFh00E0h Port P0 Register P000h00E1h Port P1 Register P100h00E2h Port P0 Direction Register PD000h00E3h Port P1 Direction Register PD100h00E4h00E5h Port P3 Register P300h00E6h00E7h Port P3 Direction Register PD300h00E8h Port P4 Register P400h00E9h Port P5 Register P500h00EAh Port P4 Direction Register PD400h00EBh Port P5 Direction Register PD500h00ECh00EDh00EEh00EFh00F0h00F1h00F2h00F3h00F4h00F5h Pin Select Register 1PINSR100h00F6h Pin Select Register 2PINSR200h00F7h Pin Select Register 3PINSR300h00F8h Port Mode Register PMR00h00F9h External Input Enable Register INTEN00h00FAh INT Input Filter Select Register INTF00h00FBh Key Input Enable Register KIEN00h00FCh Pull-Up Control Register 0PUR000h00FDh Pull-Up Control Register 1PUR100h00FEh Port P1 Drive Capacity Control Register(2)P1DRR00h00FFhX: UndefinedNOTES:1.The blank regions are reserved. Do not access locations in these regions.2.In J, K version these regions are reserved. Do not access locations in these regions.Table 4.5SFR Information (5)(1)Address Register Symbol After reset 0100h Timer RA Control Register TRACR00h0101h Timer RA I/O Control Register TRAIOC00h0102h Timer RA Mode Register TRAMR00h0103h Timer RA Prescaler Register TRAPRE FFh0104h Timer RA Register TRA FFh0105h0106h LIN Control Register LINCR00h0107h LIN Status Register LINST00h0108h Timer RB Control Register TRBCR00h0109h Timer RB One-Shot Control Register TRBOCR00h010Ah Timer RB I/O Control Register TRBIOC00h010Bh Timer RB Mode Register TRBMR00h010Ch Timer RB Prescaler Register TRBPRE FFh010Dh Timer RB Secondary Register TRBSC FFh010Eh Timer RB Primary Register TRBPR FFh010Fh0110h0111h0112h0113h0114h0115h0116h0117h0118h Timer RE Second Data Register / Counter Data Register TRESEC00h0119h Timer RE Minute Data Register / Compare Data Register TREMIN00h011Ah Timer RE Hour Data Register(2)TREHR00h011Bh Timer RE Day of Week Data Register(2)TREWK00h011Ch Timer RE Control Register 1TRECR100h011Dh Timer RE Control Register 2TRECR200h011Eh Timer RE Clock Source Select Register TRECSR00001000b 011Fh0120h Timer RC Mode Register TRCMR01001000b 0121h Timer RC Control Register 1TRCCR100h0122h Timer RC Interrupt Enable Register TRCIER01110000b 0123h Timer RC Status Register TRCSR01110000b 0124h Timer RC I/O Control Register 0TRCIOR010001000b 0125h Timer RC I/O Control Register 1TRCIOR110001000b 0126h Timer RC Counter TRC00h0127h00h0128h Timer RC General Register A TRCGRA FFh0129h FFh012Ah Timer RC General Register B TRCGRB FFh012Bh FFh012Ch Timer RC General Register C TRCGRC FFh012Dh FFh012Eh Timer RC General Register D TRCGRD FFh012Fh FFh0130h Timer RC Control Register 2TRCCR200011111b 0131h Timer RC Digital Filter Function Select Register TRCDF00h0132h Timer RC Output Master Enable Register TRCOER01111111b 0133h0134h0135h0136h0137h0138h0139h013Ah013Bh013Ch013Dh013Eh013FhX: UndefinedNOTES:1.The blank regions are reserved. Do not access locations in these regions.2.In J, K version these regions are reserved. Do not access locations in these regions.。

彩色电视机机芯类型厂家对照表彩电型牌号机芯类型生产厂家夏普C-1807DK C-1826DK NC-2T康佳T2106 06康佳T2506 06康佳T2806 06德律风根5016 415 德律风根德律风根6016 415 德律风根德律风根2006 415 德律风根德律风根5000 415 德律风根德律风根GF-606X 415 德律风根长虹C2965 70A长虹D2591AE 70A长虹D2993 70A牡丹49C5 83PG牡丹54C10 83PG牡丹54C18 83PG牡丹54C20 83PG牡丹54C9 83PG 北京牡丹64C6 83PG牡丹49C3C 83PG三洋CEP2100 84P北京2132MA A3北京8320 A3北京8353 A3高路华TC-2813C A3海信TC2125C A3 青岛海信集团北京8636 A3凯歌4C5403-1 A3 三洋红太阳A2528 A6 长虹公司红双喜R2121A R2516A A6 长虹公司红太阳A2116 A6 四川长虹公司红太阳A2117 A6 四川长虹公司红太阳P2119A A6 四川长虹公司红太阳A2118 A6 四川长虹公司红双喜P2119B A2118BD A6 长虹公司红双喜A2528B P2119BC A6 长虹公司红双喜R2111A R2112A A6 长虹公司红双喜R2113A R2115A A6 长虹公司红双喜R2116A R2117A A6 长虹公司红双喜R2117AE R2118A A6 长虹公司红双喜R2119A R2120A A6 长虹公司红双喜R2518A R2916A A6 长虹公司红双喜R2918A A6 长虹公司海信TC2139 A6-CA 青岛海信集团海信TC2145 A6-CA 青岛海信集团海信TC1419 A6-CA 青岛海信集团海信TC1801 A6-CA 青岛海信集团海信TC2105 A6-CA 青岛海信集团海信SR5468 A6-CA 青岛海信集团海信TC2117V A6-CA 青岛海信集团海信TC2119 A6-CA 青岛海信集团海信TC2125 A6-CA 青岛海信集团海信TC2111 A6-CA 青岛海信集团海信TC2531 A6-CB 青岛海信集团海信TC2539 A6-CB 青岛海信集团海信TC2958 A6-CB 青岛海信集团东芝2539UE/UH BAZ00KA东芝2918KTV 火箭炮 BAZ00KA东芝2939XP 火箭炮 BAZ00KA东芝3429Ktp 火箭炮 BAZ00KA索尼KV-E28MH1 BG-1L索尼KV-E29MN11 BG-1L索尼KV-J29MF1 BG-1L IC2总线牡丹49C1 DXE 北京牡丹54C4A DXE 北京牡丹C5410A DXE 北京牡丹37C9 DXF 北京牡丹54F1P DXF 北京牡丹54F2P DXF 北京牡丹64C1P DXF 北京海信TC2110 E3P海信TC2133 E3P 青岛海信公司海信TC2153 E3P 青岛海信公司海信TC2168 E3P 青岛海信公司海信TC2170 E3P 青岛海信公司海信TC2571 E5 青岛海信公司海信TC2506 E5P 青岛海信公司海信TC2510 E5P 青岛海信公司海信TC2553 E5P 青岛海信公司海信TC2565 E5P 青岛海信公司海信TC2971 E7P 青岛海信公司福日HFD-2552/2553 F24 福建福日福日HFD-2953 F24 福建福日东芝火箭炮 2539UE.H F3SS东芝火箭炮2938DE/DH F3SS东芝火箭炮2939UE/UH F3SS东芝火箭炮2939UXE/UXH/XP F3SS东芝火箭炮28DW4UC/UH/UE F3SSR东芝火箭炮32DW4UC/UH/UE F3SSR福日HFW-3298 F41福日HFC-1425及C1--C3 F90PT 福建日立公司福日HFC-1425G F90PT 福建日立公司福日HFS-1425 F90PT 福建日立公司福日HFC-1725 F90PT 福建日立公司福日HFC-2025(G) F90PT 福建日立公司福日HFC-2125((H)(C) F90PT 福建日立公司福日HFS-2125(H) F90PT 福建日立公司福日HFC-2125(N)(G)(Y1/T1) F90PT 福建日立公司福日HFC-1925 F90PT 福建日立公司福日HFC-1775 F91PP 福建日立福日HFC-1975 F91PP 福建日立福日HFC-2175 F91PP 福建日立福建HFC-2176 F91PP派生福建日立福建HFC-2179 F91PP派生福建日立日立 CMT2138/2139 G7PN日立CPT1888 CPT2177SF/DU G7PN日立CPT2408SF/DU CMT2137 G7PN日立CMT2518/2700/2718 G9PL日立CMT2900/2901/2908 G9PL日立CMT2916/3300 G9PL海尔HH-2589 HH-2589A H 青岛海尔集团海尔HH-2948A HH-2948 H 青岛海尔汤姆逊TF5140DK HR-4R100汤姆逊TFE5114DK HR-4R100山茶SC-47A SC-51D JVC上海X647-1A X647-1B JVC上海Z647-1A JVC沈阳SDC47-10 JVC胜利CT-2088 JVC天鹅7695VPNM JVC莺歌C47-4 C47-4 1C55-2 CSJVC菊花C471A JVC龙江127695PU MC47G-1 JVC如意SGS-3712 JVC7185上海Z237-1 Z237-1A JVC7185上海Z237-2 JVC7185上海Z247-1A JVC7185沈阳7185SY 7695SY JVC7185沈阳7190Y 7195SY JVC7185北京836 JVC7185天鹅CS37-VZA JVC7185 内蒙古海燕7185XA JVC7185海燕7190HF JVC7185海燕CS37-2 JVC7185襄阳37C1B JVC7185襄阳37XC1 JVC7185黄山7190HF JVC7185 合肥无线电二厂金凤C37-6 C37-4 JVC7185成都C37-844B JVC7185西湖7190HZ JVC7185 杭州电视机厂春风14C-1 14C-17 14C-L JVC7185JVC7185PK 7185SY JVC7185JVC7190 JVC7185龙江Z237-1A 7695VPJM JVC7185JVC7190A 71900J JVC836 76 JVC7185JVC7190HS 7195SY 7195HS JVC7185东海18'' JVC7695 宁波无线电厂春风C47-3B JVC7695(胜利)康艺KTP-5131 JVC7695(胜利)JVC-7685JM JVC7695(胜利)龙江C47G-1 JVC7695(胜利) 佳木斯电视机如意SGC-5602 JVC7695(胜利)如意SGC4702 JVC7695(胜利)三元476YC-4 JVC7695(胜利) 南通三元47SYC-4 JVC7695(胜利)山茶SC-47A JVC7695(胜利) 云南电视机厂上海Z647-4A JVC7695(胜利) 上海广播器材厂上海Z647-IB JVC7695(胜利) 上海广播器材厂沈阳SDC47-10 JVC7695(胜利) 沈阳电视机厂天鹅7695VPNM JVC7695(胜利) 内蒙古电视机厂天鹅CS37-VI JVC7695(胜利)海燕CS47-2-AV JVC7695(胜利) 西安无线电一厂海燕CS56-2 JVC7695(胜利)莺歌C47-4 JVC7695(胜利) 武汉电视机厂菊花C47A JVC7695(胜利) 丹东电视机JVC-7175PR JVC7695(胜利)康艺KT-8250 JVC7695(胜利)康艺KTB-5132 JVC7695(胜利)康艺KTN-5132 JVC7695(胜利)龙江C37G-1 JVC7695胜利胜利7175DK/PK JVC六片胜利7705 JVC六片胜利7885JM JVC六片北京838 839 Z256 JVC六片机北京839-1 Z656 JVC六片机北京JVC7175PK837-2 JVC六片机星牌7175 白朗3614 3612 JVC六片机鹦鹉838PK JVC六片机东芝C-182D5C L851东芝C-182E5C L851 日本东芝公司东芝C-201E3C L851东芝C-202D5C L851东芝C-202E5C L851东芝C-205D5C L851东芝C-207D5CEC L851东芝C-219D5C L851飞浪FC471 L851 宜昌市电视机厂北京8306 L851 天津无线电厂西湖47CD4A L851 杭州电视机厂星海47CJ2 L851 大连电视机厂宇航NTC-47 L851 南昌电视机厂华日C47J-3A/3B L851 贵州电视机厂长风CFC47-2 L851长风CFC47-3A L851 兰州长风机器厂黄河HC47-3 L851 西安黄河机器制造厂佳丽18彩电 L851 香港陆氏公司成都7255D L851康艺KDB-3731B L851康艺KTB-3731B L851康艺KTB3731G L851东芝C-141D5C L851东芝C-147D5C L851东芝C-161E5C L851东芝C-167D5C L851东芝C-181E3C L851孔雀KQ47-36 夏普MC-ⅡT 苏州电视机厂松下TC830D/DHN 夏普N12SHARP C-1843DK 夏普NC-1飞跃C-1883DK 夏普NC-1 上海无线电十八厂SHARP C-1830DK 夏普NC-1SHARP C-1886 夏普NC-1SHARP C-1835DK 夏普NC-1SHARP C-1820CKN 夏普SHARP C-1800 夏普NC-1SHARP C-1813MK 夏普NC-1飞跃C-1837DK 夏普NC-1 上无十八厂SHARP C-1837DK 夏普NC-1SHARP C-1885DK 夏普NC-1虹美WJD-29 夏普NC-1 无锡SHARP C-1820MK 夏普NC-1SHARP C-1835CK 夏普NC-1SHARP C-1405CK 夏普NC-1SHARP C-1884 夏普NC-1SHARP C-1430DK 夏普飞跃C-1835CK 夏普NC-1 上无十八厂SHARP C-1838DK 夏普NC-1SHARP C-1404DK 夏普NC-1天鹅C-1430MK 夏普NC-1天鹅C-1820MK 夏普NC-1SHARP C-1404CK 夏普NC-1SHARP C-1833DK 夏普NC-1SHARP C-1834DK 夏普NC-1虹美C-1820CK 夏普NC-1 无锡电视机厂SHARP C-1836CK 夏普NC-1飞跃C-1820CK 夏普NC-1SHARP C-1820CK 夏普NC-1SHARP C-1836DK 夏普NC-1凯歌4C4701 夏普NC-2T 上海无线电四厂凯歌4C4701-1 夏普NC-2T 上海无线电四厂飞跃47C2-2/-3 夏普NC-ⅡT 上海无线电18厂虹美WCD-25 夏普NC-ⅡT 无锡电视机厂珊瑚D47C-1 夏普NC-ⅡT 福建电视机厂金星C4715 夏普NC-ⅡT 上海电视一厂凯歌4C4701/-1 夏普NC-ⅡT 上海无线电四厂飞燕DUC47-C4 夏普NC-ⅡT 南宁无线电三厂三元47SYC-2/-3/-3-2 夏普NC-ⅡT 南通电视机厂熊猫DB47C 夏普NC-ⅡT 南京无线电厂天鹅CS47-S1 夏普NC-ⅡT 内蒙古电视机厂夏普C-1805DK 夏普NC-ⅢKSHARP C-1836DK 夏普TA两片山茶SC-51A 夏普TA两片飞跃47CZ-3 夏普TA两片上海飞跃47CZ-2 夏普TA两片珊瑚47C-9 夏普TA两片SHARP C-1826CK 夏普TA两片三元47SYC-2 夏普TA两片南通电视机厂SHARP C-2001UK 夏普TA两片SHARP C-1801DF 夏普TA两片SHARP C-1862 夏普TA两片SHARP C-1827 夏普TA两片三元47SYC-3 夏普TA两片南通电视机厂三元47SYC-3-2 夏普TA两片南通电视机厂珊瑚D476-1 夏普TA两片飞燕DUC47-C4 夏普TA两片SHARP C-NS-2T 夏普TA两片乐华TC-511KDH 松下M11牡丹TC-483D 松下M11熊猫DB47C3-1 松下M11 南京无线电厂NATIONAL TC483 TC483D TC4 松下M11NATIONAL TC484QD TC-484 T 松下M11金凤C47S2A 松下M11 辽宁无青岛TC-484Q 松下M11青岛47CD840QD 松下M11 青岛电视机厂乐华TC-819KD 松下M11 广州广播设备厂长虹CJ-37A 松下M11泰山TS47C4 松下M11 山东电视机厂乐华TC-484QD 松下M11 广州广播设备厂乐华TC-299KD 松下M11 广州广播设备厂NATIONAL TC-201DH 松下M11NATIONAL TC-216D 松下M11熊猫TC-817N 松下M11 南京无线电厂NATUONAL TC-817N TC-818PS 松下M11熊猫DB-3702 松下M11 南京无线电厂牡丹TC-483P 松下M11熊猫DB-4703 松下M11 南京无NATIONAL TC-482C TC-482D 松下M11NATIONAL TC-217 217D TC21 松下M11熊猫DB47C5 松下M11 南京无线电厂长虹CJ-73 松下M11乐华TC-484KD 松下M11牡丹TC-47C3 松下M11 北京电视机厂乐华TC-819KDH 松下M11乐华TC-819DH 松下M11 广州广播设备厂美乐47CB840G(A) 松下M11 燎原无线电厂(760厂)金凤C47S2 松下M11 辽宁无线电8厂NATIONAL TC-877DH 松下M11NATIONAL TC-816 TC-817 TC 松下M11青岛TC484KD 松下M11乐华TC-461KDH 松下M11 广州广播设备厂乐华TC-371KDH 松下M11泰山TC47C3/C4 松下M11 山东电视机厂熊猫DB47C3 松下M11 南京无线电厂熊猫3631D 夏普二片南京无线电厂熊猫2118 LA7680单片南京黄山AH6450 M-u二片合肥无线电二厂三洋 CTP-5904W M-u两片亦是83P 日本三洋公司昆仓TC-684D M11 松下松下TC-2030DHN M12松下TC-230D M12松下TC-830D M12松下TC-830DHN M12松下TC-2185CR M15L松下TC-D21 TC-2186 TC-21 M15L松下TC-2173 M15L 松下公司松下TC-AV29C/XR TC-2187XR M15MTC-2187XR M15M 松下TC-2687CXV M15M 松下TC-AV29C M15M 松下TC-AV29XR M15M 松下松下TC-29V2H M16MTC-25V30HR M16M 松下TC29V1R M16M 松下TC-29VR30R M16M 松下TC-29VH M16M 松下松下TC-29GF20R M17松下TC-29GF12G/GF15R/G M17松下大野画王TC-28GW25G M17W松下大野画王TC32GW25G M17W牡丹74C2 MC-15A 北京牡丹64C1 64C2 MC-15A 北京松下TC-25V40RQ MX-2松下TC-25V42G MX-2松下TC-2552G MX-2A松下TC-2550R MX-2A松下TC-2950R MX-2A松下TC-2952G MX-2A松下TC-2198 MX-3松下TC-2148 MX-3松下TC-2555R MX-4 松下公司虹美C-1820CK NC-1 无锡电视机厂长虹2939KE NC-3 西安长虹2988 2589 2588 2188 NC-3 西安长虹C2919P NC-3长虹C2919PK NC-3 西安长虹C2919PN NC-3 西安长虹C2919PS NC-3 西安长虹C2919PV NC-3 西安长虹C2920PN NC-3 西安长虹C2939KS NC-3 西安长虹C2939KV NC-3 西安长虹C3418PK NC-3 西安长虹C3418PN NC-3 西安长虹G2966 NC-6 四川长虹公司日立CEP-281 NP6日立CAP-169D NP80C福日HFC-161 HFC-451 NP82CHITACHI CRP-451D CRP-450 NP82C福日HFC-237 NP82C 福日公司福日HFC-237R HFC-321/R NP82C 福建福日公司福日HFC-328DX NP82C 福日公司HITACHI CTP-1838 1838D CT NP82C 日本日立HITACHI CTP2038E NP82CHITACHI CTP237 CTP237D NP82C环宇CEP-321D NP82C 石家庄电视机厂环宇CPS-182HB NP82C 石家庄电视机厂环宇CPS-201HB NP82CHITACHI HFC-236 NP82C金星C472 NP82C 上海电视一厂HITACHI CEP-231D CEP-323D NP82CHITACHI CAP-161D NP82C 日立飞跃37D1-1 NP8C飞跃37D1-2 47C1-3 NP8C飞跃47C-1 NP8C飞跃47C-3 NP8C百合花37D NP8C飞跃47C2-3 NP8C 上无十八厂百合花CD37-1 CD47-1 NP8C百合花CD47-1 NP8C 上海电视11厂韶峰SFC46-1 NP8C 湖南电视机厂韶峰STC46-1 NP8C 湖南电视机厂福日CRP-450G NP8C 福建福日公司福日HFC-236 NP8C 福建福日公司福日HFC-321 NP8C 福建福日公司福日HFC-450 NP8C 福建福日公司福日HFC-450G NP8C福日HFC-490G NP8C 福建福日公司HITACHI CTP236D NP8C友谊CTP-20D NP8C环宇37C-2 NP8C环宇47C-2 NP8CHITACHI (日立)CTP-236 NP8CHITACHI CWP-320 NP8C 日本日立公司HITACHI CWP-350D NP8C金星C37-401 NP8C金星C37-401 C46-1 C47 C47 NP8C金星C46-1 NP8C 上海电视一厂金星C47 C4720 C515 C56-40 NP8C金星C47-1 NP8C 上海电视一厂金星C475 NP8C 上海电视一厂金星C56-406 NP8C金星C563 NP8C金星C563 C56-402 NP8C凯歌4C3701 NP8CHITACHI CAP-168D NP8C兰花CD47-1 SC47-2V,U NP8C兰花CD47-2u NP8C兰花SC47-2U/V NP8C 韶兴电视机厂兰花SC47-2V NP8C兰花SC47Z-H/V NP8C 韶兴电视机厂HITACHICEP-320 NP8C 日本日立公司HITACHICEP-320D NP8C 日本日立公司日立CPT236DS CPT2023,2033 NP8C日立CRT-1468 NP8C日立CRT-1668 1866 NP8CHITACHI CRP-450DA NP8C飞鹿31H-2 -4 P-24飞跃12D1 P-24沈阳SD31J-3 P-24海燕31J-3 P-24红梅WJD-6 P-24星海JDD124 P-24红岩SQ-311 P-24熊猫DB31H2 P-24友谊312 P-24长城JTH123 P-24金星B31-2 P-24凯歌4D15A P-24成都CD783-1 P-24春风IC-121 P-24孔雀KQ31-J P-24 苏州昆仓B314 P-24牡丹31H2 P-24牡丹31H3 P-24 北京北京8303 PW4846 天津无线电厂世纪窗HFC-29S10 S4 福日公司世纪窗HFC-25S11 25S15 29S S4 福日公司福日HFC-29S17 HFC-29S18 S4 福日公司世纪窗HFC-29S16 S4 福日公司世纪窗HFC-25S10 S4 福日公司南日NA-813 T-III南日NA-833 T-III欧丽安2060 T-IIITOSHIBA C-182D5C C182E5C T-IIITOSHIBA C-201E3C T-IIITOSHIBA C-201EC T-IIITOSHIBA C-2020F T-III飞浪FC471 T-IIITOSHIBA C-202D5C T-IIITOSHIBA C-202E5C T-IIITOSHIBA C-207D5C T-III北京8306 T-III厦华X-5102 T-III天鹅CS47-SL T-III西湖47CD4 T-III西湖47CD4A T-III 杭州电视机厂厦华X-3718 T-III 广东厦华北京836 T-III星 T-III华日C37J-3A T-III华日C47-3A T-III华日C47J-3 C47J-3B T-III长城JTC472 T-III芙蓉C-5504G T-III长风CFC47-3 T-III长风CFC47-3A T-III黄河HD47-III T-III 国营黄河无线电厂佳丽EC227D T-III康艺KTB-3731 T-III康艺KTB-3731D T-III康艺KTB-3731G T-III康艺KTN-5145 T-III快乐HC186 T-IIITISHIBA C-207D5EC T-IIITISHIBA C-219D5C T-III华源KDC371 T-IIITOSHIBA C-147D5C T-IIITOSHIBA C-161E3C T-IIITOSHIBA C-161E5C T-III康艺KTB-5147 T-III (东芝) TOSHIBA C-167D5C C181EC C T-III 东芝TOSHIBA C-141D5C 东芝 T-III 东芝飞波FC471 TA二片沙巴TS51SC320 TH-4R100汤姆逊C-51MP01 TH-4R100汤姆逊C-5601-P TH-4R100汤姆逊TEP5140 TH-4R100汤姆逊TS-3618 TH-4R100南宝EC-182 X-53P 海南西湖37CD7A X-53P南虹EC-141 X-53P东芝C-2021Z/ZB X-53P东芝C1821Z X-53P海虹HC-22-1 X-53P北京837-1 X-53P天虹RC-141D X-53P西湖37CD2 X-53P 杭州星海46CJI X-53P黄河HC37-Ⅱ X-53P佳丽彩EC-141D X-53P佳丽彩EC-182 X-53P佳丽彩EC-192 X-53P环宇37C-2 X-53P东芝C-1421Z X-53P东芝C-1621Z X-53P黄河HC-47-IV X-56P 黄河机器厂星海47CJI X-56P 大连电视机厂环宇47C-2 X-56P 石家庄电视机厂西湖JVC-471 X-56P长城 JTC-471 X-56P 天津无线电厂长城JTC-371 X-56P星海46CJI X-56P 大连电视机厂TOSHIBA C-2031ZD X-56P长城JTC471-2F X-56P 天津电视机厂天鹅CS46-2 X-56PTOSHIBA C-1831ET X-56P长城JVC-471A X-56P 天津电视机厂TOSHIBA SU-1705 X-56P西湖47CD3 X-56P 杭州电视机厂长城JTC471-2A X-56P 天津电视机厂北京837 X-56PTOSHIBA C-1831Z X-56PTOSHIBA C-2031Z X-56PTOSHIBA C-1631Z X-56P凯歌4C4702 X-56P 上海无线电四厂TOSHIBA C-1431ZD X-56P长城JTC471-2A X-56P 天津黄河HC47-1-2 X-56P 黄河机器厂黄河 HC-47-I X-56P 黄河机器厂华日C47J-1 X-56P 贵州电视机厂TOSHIBA C-184J418K X-56P长城JTC-47-Ⅱ X-56P 天津电视机厂TOSIHBAC-1431Z X-56P 东芝黄河 HC-47Ⅱ X-56P 东芝黄河机器厂黄河 HC-37Ⅱ X-56P 东芝孔雀KG47-1882 XE-3 索尼苏州电视机厂SONYKV-132CH XE-3(索尼)SONYKV-2062CH XE-3(索尼)赣新KG-4782 XE-3(索尼) SONYKV-1430 XE-3(索尼) SONYKV-1882CH XE-3(索尼) 日本索尼公司SONYKV-2060 XE-3(索尼)孔雀KQ-1882 XE-3(索尼) 苏州电视机厂SONYKV-2092CH XE-3(索尼)德律风根5030 德律风根416德律风根5020 德律风根416东芝2518KTV 东芝BAZ00KA长虹C2588 东芝NC-2长虹C2589 东芝NC-2长虹C2188 东芝NC-2东芝205D5C 东芝TA两片东芝182D5C 东芝TA两片东芝161D5C 东芝TA两片长城JTC472 东芝TA两片东芝207D5C 东芝TA两片东芝141D5C 东芝TA两片东芝201E3C 东芝TA两片北京8306 8312 8314 东芝TA两片北京8316 东芝TA两片西湖47CD4A 东芝TA两片长风CF47C-2/3A 东芝TA两片黄河HC47-Ⅲ东芝TA两片金星C473 东芝TA两片东芝147D5C 东芝TA两片东芝167D5C 东芝TA两片东芝181D5C 东芝TA两片东芝181E3C 东芝TA两片东芝182E5C 东芝TA两片东芝202D5C 东芝TA两片东芝202E5C 东芝TA两片东芝219D5C 东芝TA两片星海47CJ2 东芝TA两片乐华TC-219DH 松下M11牡丹TC-483DH 松下M11NATIONAL TC-201VD 松下M11长虹CJ-47A /51A/56A 松下M11 长虹机器厂牡丹TC-818PS 松下M11昆仑TC-817 松下M11 北京东风电视机厂松下TC-M25 (遥控) 松下M15松下TC-25C TC-2687CXV 松下M15M松下三超画王 TC-29GF10R 松下M1721S11-A1 夏普7P-M21S11-A2 夏普7P-M夏普C-5407CK C-2101CK 夏普7P-SR1夏普CV-2121CK/DK 夏普7P-SR125AN1 夏普9P-KM429AN1 夏普9P-KM425N21-D2 夏普9P-KM425N42-E2 夏普9P-KM429N21-D1 夏普9P-KM425AX4,29AX4 夏普A-10029AW4,33AW4 夏普A-100松下TC-2173DR/DDR/DHNR 夏普M15松下TC-2171DR/DDR/DHNR 夏普M15松下TC-2163DR/DDR/DHNR 夏普M15</PRE>南珠7695 东芝X-53P厦华XT-5102 东芝二片厦门华侨电子企业公司厦华XC-3718 东芝二片厦门华侨电子企业公司金星C511 东芝二片飞利浦CT-6050A. 飞利浦CTO飞利浦CTO-6160，CTO6020，飞利浦CTO飞利浦CTO-93T.CTO-93S 飞利浦CTO飞利浦KT3 KT3-C 飞利浦KT3海尔HP-2981C 飞利浦单片青岛厦华XT-6698T 国际线路广东厦门厦华XT-5653T 国际线路厦华XT-7698T XT-7103T 国际线路康艺KTN5147 康艺5147康艺KTN5143 康艺两片康艺KTN3732 康艺三片康艺KTR5131 康艺四片康艺KTB5132 康艺四片康艺KT8250 康艺四片康艺KTN5132 康艺四片翔宇SC-226 陆氏两片飞浪FC471 陆氏两片百乐BC56-201A 陆氏两片宇航NTC-56 陆氏两片快乐HC-227 陆氏两片EC-182T EC-2061 陆氏四片机百花EC-22T 陆氏四片机海虹22 陆氏四片机天虹EC-206 陆氏四片机天虹RC-141D 陆氏四片机佳丽DUC-22 陆氏四片机佳丽EC-182 陆氏四片机快乐EC-142T 陆氏四片机佳丽EC-142 陆氏四片机佳丽彩EC-227T 陆氏四片机南宝EC-142 陆氏四片机海南岛南宝HCR-8418 陆氏四片机中国海南岛无线电厂罗兰士堡LS-2008R 罗兰士P-50A 彩华CT-1402PDSX 日电TA.u两片飞鹿CT-1802PH 日电TA.u两片NEC CT1803 日电TA.u两片NEC 4710NCZ 日电TA.u两片彩华710PDSZ 日电TA.u两片NEC CT-40(F)PDH 日电TA.u两片彩华4710NCZ 日电TA.u两片NEC CT-1402PDSX 日电TA.u两片赛格CT-1803PD 日电TA.u两片双喜4710CZ-Z 日电TA.u两片NEC CT1404(R)PDH 日电TA.u两片日电20T774PDH 日电四片日电CT-1802PDH(R) 日电四片日立CMT2518 日立G9PL日立CRP-144 CRP-149/S 日立NP6C日立CWP-137 日立NP6C日立CTP-216/D 日立NP6C日立CTP-203 CTP218 日立NP6C日立CTP215 日立NP6C日立CWP-132 日立NP6C日立CEP-218 CEP-281 CEP-2 日立NP6C 日立CTP-1468 日立NP80C日立CAP-69D 日立NP80C日立CPT-1668 日立NP80C日立CTP-2008SF CTP-2018SF 日立NP84C 日立CTP-1805SF 日立NP84C日立CTP-2001SF CTP-2005S 日立NP84C 日立CTP-2125SF/DU 日立NP84C日立CTP-1808SF CTP-1818SF 日立NP84C 日立CTP-1801 日立NP84C三菱1823HD 三菱两片三洋CTP3920 CTP3940 CTP2 三洋79P昆仓CTP3920 三洋79P三洋CTP6920 三洋79P莺歌C51-3-RC 三洋80P黄河HC54FSⅢ A 三洋80P三洋CTP3525 CTP3915 CTP39 三洋80P 莺歌C9821 三洋80P康艺KTN-5145 三洋80P泰山51C5A 三洋80P海虹HH-5493 三洋A3长虹A2116 三洋A6昆仓CTP-3904 三洋M-U 83PSANYO CTP-4903A 三洋M-u两片SANYO CTP-4903B 三洋M-u两片SANYO CTP-3905H CTP-3905G 三洋M-u两片SANYO CTP-4903 三洋M-u两片SANYO CTP-3906 三洋M-u两片SANYO CTP-4905 三洋M-u两片SANYO CTP-4940 三洋M-u两片SANYO CTP-5903 CTP-5904 三洋M-u两片日本三洋SANYO CTP-3905 3905A 三洋M-u两片SANYO CTP-5904JH CTP-5904 三洋M-u两片SANYO CTP-3904 三洋M-u两片SANYO CTP-3905Z CTP-3905G 三洋M-u两片昆仓S373 三洋M-u两片 83PSANYO CTP-6904T 三洋M-u两片83PSANYO CTP-5905 CTP-5905M 三洋M-u两片83P SANYO CTP-6904JH 三洋M-u两片83P SANYO CTP-6904SZ 三洋M-u两片83P SANYO CTP-59438 三洋M-u两片83P金鹊47PC1-2 三洋M-u两片83P 重庆716厂红岩SC-471 三洋M-u两片83P 重庆无线电三厂SANYO CTP-6904 CTP6904JH 三洋M-u两片83P孔雀KQ47-39 三洋M-u两片83P 苏州电视机厂昆仓S471 三洋M-u两片83PSANYO CTP-6904W 三洋M-u两片83PSANYO CTP-7922 三洋M-u两片83P黄山AH47-24C 三洋M-u两片83P 中国合肥无线电二厂SANYO CTP-6904C 三洋M-u两片83P SANYO CTP-6055 三洋M-u两片83P昆仓S417 三洋M-u两片83PSANYO CTP-6934 三洋M-u两片83P成都C47-851 三洋M-u两片83P 成都无线电一厂龙江C51G1 三洋M-u两片83P黄山AH47-24D 三洋M-u两片83P 合无二厂金鹊47DC1 三洋M-u两片83P 重庆716厂SANYO CTP-6904W-02 三洋M-u两片83P三洋CTP-59438 三洋M-u两片83P 深圳华强电子工业公司SANYO CTP-5904P 三洋M-u两片83P红岩SC-562 三洋M-u两片83P春笋CSD-471 三洋M-u两片83P 山西无线电厂SANYO CTP-6925 三洋M-u两片83P黄山CTP-3905 三洋M-u两片83P 合肥无线电二厂北京CTP-6904 三洋M-u两片83P金鹊47CD1-2 三洋M-u两片83P 重庆716厂昆仓S3920 三洋M-u两片83P孔雀KQ37-39 三洋M-u两片83P 苏州电视机厂SANYO CTP-6904JM 三洋M-u两片83P胜利7685JM 胜利X56P四片龙江C47C-1 胜利X56P四片三元47SYC-4 胜利X56P四片菊花C471A 胜利X56P四片山茶SC-47A 胜利X56P四片沈阳7695SY 胜利X56P四片海燕CS56-2 胜利X56P四片胜利7695JM 胜利X56P四片莺歌C47-4 胜利X56P四片如意SGC-5602 胜利X56P四片海燕CS47-2AU 胜利X56P四片上海Z647-1B/2A/4A 胜利X56P四片龙江7695VPJM 胜利X56P四片沈阳SDC47-10 胜利X56P四片北京8305-2PS 胜利两片如意SGC-4703 胜利两片北京839-2 胜利两片海Z656-1A 胜利两片胜利7255JM/NM/D 胜利两片春风C47-28 胜利两片龙江7755JM 胜利两片北京837-1 胜利六片机JVC7705 胜利六片机JVC7855JM 胜利六片机JVC7705PK 胜利六片机沈阳7190SY 胜利四片海燕7185XA 胜利四片天鹅37-1 胜利四片上海Z237-1A/2A 胜利四片西湖7190HF 胜利四片沈阳7105SY 胜利四片胜利7190/A/S/J/HS/SY 胜利四片春风14C-17 胜利四片春风14C-1 胜利四片如意SGC-3702 胜利四片胜利7185MX 胜利四片金凤CS56-2 胜利四片上海Z647-1B/2A/4A 胜利四片金凤C37-4 胜利四片龙江Z237-1A 胜利四片襄阳37XC1 胜利四片海燕CS37-2 胜利四片海燕7190HF 胜利四片黄河7190HF 胜利四片机松下TC-2588 松下C150松下TC-2188/S/M 松下C150 松下TC-2188M 松下C150。

32" LCD Monitor Dell S3222HSServiceServiceServiceSimplifiedImportant Safety NoticeProper service and repair is important to the safe, reliable operation of all DELL Company Equipment. The service procedures recommended by DELL and described in this service manual are effective methods of performing service operations. Some of these service operations require the use of tools specially designed for the purpose. The special tools should be used when and as recommended.It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. DELL could not possibly know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, DELL has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by DELL must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected.Hereafter throughout this manual, DELL Company will be referred to as DELL.WARNINGUse of substitute replacement parts, which do not have the same, specified safety characteristics may create shock, fire, or other hazards.Under no circumstances should the original design be modified or altered without written permission from DELL. DELL assumes no liability, express or implied, arising out of any unauthorized modification of design.Servicer assumes all liability.FOR PRODUCTS CONTAINING LASER:DANGER-Invisible laser radiation when open. AVOID DIRECT EXPOSURE TO BEAM.CAUTION-Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.CAUTION -The use of optical instruments with this product will increase eye hazard.TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF THIS SERVICE MANUAL.Take care during handling the LCD module with backlight unit-Must mount the module using mounting holes arranged in four corners.-Do not press on the panel, edge of the frame strongly or electric shock as this will result in damage to the screen. -Do not scratch or press on the panel with any sharp objects, such as pencil or pen as this may result in damage to the panel.-Protect the module from the ESD as it may damage the electronic circuit (C-MOS).-Make certain that treatment person’s body is grounded through wristband.-Do not leave the module in high temperature and in areas of high humidity for a long time.-Avoid contact with water as it may a short circuit within the module.-If the surface of panel becomes dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may damage the panel.)1. Exploded view diagram with list of items342. Wiring connectivity diagram3. Mechanical InstructionTools RequiredList the type and size of the tools that would typically can be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.Tool Description:−Screwdriver (Phillip-head, Hexagonal head)−Penknife31 1 224. Trouble shooting instructions。

PACKAGING INFORMATIONOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)SN65C3232D ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232DBR ACTIVE SSOP DB162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232DBRE4ACTIVE SSOP DB162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232DE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232DR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232DRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232DW ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232DWE4ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232DWR ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232DWRE4ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232PW ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232PWE4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232PWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN65C3232PWRE4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232D ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232DBR ACTIVE SSOP DB162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232DBRE4ACTIVE SSOP DB162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232DE4ACTIVE SOIC D1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232DR ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232DRE4ACTIVE SOIC D162500Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232DW ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232DWE4ACTIVE SOIC DW1640Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232DWR ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232DWRE4ACTIVE SOIC DW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232PW ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMOrderable Device Status(1)PackageType PackageDrawingPins PackageQtyEco Plan(2)Lead/Ball Finish MSL Peak Temp(3)SN75C3232PWE4ACTIVE TSSOP PW1690Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232PWR ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIMSN75C3232PWRE4ACTIVE TSSOP PW162000Green(RoHS&no Sb/Br)CU NIPDAU Level-1-260C-UNLIM(1)The marketing status values are defined as follows:ACTIVE:Product device recommended for new designs.LIFEBUY:TI has announced that the device will be discontinued,and a lifetime-buy period is in effect.NRND:Not recommended for new designs.Device is in production to support existing customers,but TI does not recommend using this part in a new design.PREVIEW:Device has been announced but is not in production.Samples may or may not be available.OBSOLETE:TI has discontinued the production of the device.(2)Eco Plan-The planned eco-friendly classification:Pb-Free(RoHS)or Green(RoHS&no Sb/Br)-please check /productcontent for the latest availability information and additional product content details.TBD:The Pb-Free/Green conversion plan has not been defined.Pb-Free(RoHS):TI's terms"Lead-Free"or"Pb-Free"mean semiconductor products that are compatible with the current RoHS requirements for all6substances,including the requirement that lead not exceed0.1%by weight in homogeneous materials.Where designed to be soldered at high temperatures,TI Pb-Free products are suitable for use in specified lead-free processes.Green(RoHS&no Sb/Br):TI defines"Green"to mean Pb-Free(RoHS compatible),and free of Bromine(Br)and Antimony(Sb)based flame retardants(Br or Sb do not exceed0.1%by weight in homogeneous material)(3)MSL,Peak Temp.--The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications,and peak solder temperature.Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided.TI bases its knowledge and belief on information provided by third parties,and makes no representation or warranty as to the accuracy of such information.Efforts are underway to better integrate information from third parties.TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.TI and TI suppliers consider certain information to be proprietary,and thus CAS numbers and other limited information may not be available for release.In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s)at issue in this document sold by TI to Customer on an annual basis.元器件交易网元器件交易网IMPORTANT NOTICETexas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. T esting and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. T o minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third-party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.Following are URLs where you can obtain information on other Texas Instruments products and applicationsolutions:Products ApplicationsAmplifiers Audio /audioData Converters Automotive /automotiveDSP Broadband /broadbandInterface Digital Control /digitalcontrolLogic Military /militaryPower Mgmt Optical Networking /opticalnetworkMicrocontrollers Security /securityTelephony /telephonyVideo & Imaging /videoWireless /wirelessMailing Address:Texas InstrumentsPost Office Box 655303 Dallas, Texas 75265Copyright 2005, Texas Instruments Incorporated。

1Features•AVR ® Microcontroller-based USB Hub and Function Controller•One Upstream Port Plus Four External and One Attached Downstream Ports •USB Hub with Two Endpoints•Embedded USB Function with 3 Endpoints •32 Programmable I/O Port Pins•High-performance and Low-power AVR RISC Microcontroller•120 Powerful Instructions – Most with 83 ns Execution Cycle Times •128K Bytes Program Memory Address Range •512 Bytes Internal SRAM•32 x 8 General-purpose Working Registers •Programmable UART and SPI Serial Interface •One 8-bit Timer/Counter with Separate Prescaler •One 16-bit Timer/Counter with Separate Prescaler •External and Internal Interrupt Sources •Programmable Watchdog Timer•Low-power Idle and Power-down Modes •Programmable 6/12 MHz Oscillator with PLL •On-chip 3.3V Power Supply •100-pin LQFP PackageOverviewThe Atmel AT43320 is a microcontroller-based USB hub with an embedded function.The USB hub has five downstream ports, one of which is permanently attached. Inter-nally the AT43320 consists of a USB hub and function interface, a hub repeater, and a high-performance, efficient 8-bit RISC microcontroller. The hub and peripheral device controller function is implemented in the microcontroller’s firmware. To the USB host,the embedded function appears as an attached port of the hub with its own device address and endpoints. The AT43320 can also be configured as a USB function with-out the hub.The USB hardware block consists of a USB transceiver, SIE, hub repeater, endpoint controllers, and an interface to the microcontroller. The USB hardware interfaces to the USB host at the transaction level. The CPU of the microcontroller is based on the Atmel AVR microcontroller and is capable of addressing up to 128K bytes of external program memory. The AVR architecture was developed to be programmed in C effi-ciently and with maximum performance.AT433202Figure 1. AT43320 Block DiagramAT433203Development SupportThe AT43320 uses the same program and development tools as the Atmel AVR microcontrollers including: C com-pilers, macro assemblers, program debuggers/simulators,in-circuit emulators. A USB development is also available including firmware source code for the most common USB applications.Figure 2. Hub/Monitor/IR Chip Application© Atmel Corporation 1999.Atmel Corporation makes no warranty for the use of its products, other than those expressly contained in the Company’s standard war-ranty which is detailed in Atmel’s Terms and Conditions located on the Company’s web site. The Company assumes no responsibility for any errors which may appear in this document, reserves the right to change devices or specifications detailed herein at any time without notice, and does not make any commitment to update the information contained herein. No licenses to patents or other intellectual prop-erty of Atmel are granted by the Company in connection with the sale of Atmel products, expressly or by implication. Atmel’s products are not authorized for use as critical components in life support devices or systems.Atmel HeadquartersAtmel OperationsCorporate Headquarters2325 Orchard Parkway San Jose, CA 95131TEL (408) 441-0311FAX (408) 487-2600EuropeAtmel U.K., Ltd.Coliseum Business Centre Riverside WayCamberley, Surrey GU15 3YL EnglandTEL (44) 1276-686-677FAX (44) 1276-686-697AsiaAtmel Asia, Ltd.Room 1219Chinachem Golden Plaza 77 Mody Road Tsimhatsui East Kowloon Hong KongTEL (852) 2721-9778FAX (852) 2722-1369JapanAtmel Japan K.K.9F, Tonetsu Shinkawa Bldg.1-24-8 ShinkawaChuo-ku, Tokyo 104-0033JapanTEL (81) 3-3523-3551FAX (81) 3-3523-7581Atmel Colorado Springs1150 E. Cheyenne Mtn. Blvd.Colorado Springs, CO 80906TEL (719) 576-3300FAX (719) 540-1759Atmel RoussetZone Industrielle13106 Rousset Cedex FranceTEL (33) 4-4253-6000FAX (33) 4-4253-6001Fax-on-DemandNorth America:1-(800) 292-8635International:1-(408) 441-0732e-mailliterature@Web Site BBS1-(408) 436-43091443A–08/99/xMMarks bearing ® and/or ™ are registered trademarks and trademarks of Atmel Corporation.Terms and product names in this document may be trademarks of others.。

AN2097应用说明VIPower:采用VIPer22A的10W空调开关电源1. 摘要新的空调机采用两个主低压输出给内部电子设备供电。

这两个主输出的低压分别是+12V和+5V。

低输出电压是由一个内部开关电源产生。

这个开关电源需要以下多个重要特性：效率高，重量轻，尺寸小，待机功耗低等。

设计人员利用VIPerX2系列产品可以开发出一个含有所有这些重要功能的电源，因此，该系列产品是开发空调应用的最理想的解决方案,特别是下文介绍的电路板是为改进图1所示的特性而专门开发的，本文在表1列举的技术规格方面讨论了空调开关电源应用。

表1：电气规格图1:电路板布局1. VIPERX2A 描述VIPerX2A 是一个单封装的产品，在同一颗芯片上整合了一个专用电流式PWM控制器和一个高压功率场效应MOS晶体管。

这种方法可以减少组件数量，降低系统成本，简化电路板设计。

因此，这个产品家族广泛用于离线开关式电源。

此外，该系列产品还采用微型的SMD封装 (SO-8)。

VIPer 系列的待机功耗（小于1W）符合蓝天使和能源之星等节能标准。

1.1. 一般特性VIPerx2A 产品采用ST的VIPower M0-3 高压专利技术，M0-3 高压技术利用一个P型掩埋层的方法，允许在同一颗芯片上集成低压系统（PWM）和电流垂直流动的功率级，如图2所示。

VIPerX2A 产品有以下一般特性:-自动热关断-高压启动电流源输入交流电压范围85-265Vac输出112V输出25V/400mA(连接输出1的线性稳压器)纹波电流<50mA连续电流输出电流（12V和5V）600mA峰值电流，小于5分钟待机功耗<1W-防止输出短路导致击穿故障的打嗝（HICCUP）模式-保证低负载条件下低功耗的突发模式而且，VIPower M0-3技术还可用于开发最小击穿电压为730V 的功率场效应MOS 晶体管。

表2说明了该产品在不同的封装和工作条件下的功率处理能力。

N32G452xB/xC/xE数据手册N32G452系列采用32 bit ARM Cortex-M4F内核，最高工作主频144MHz，支持浮点运算和DSP指令，集成多达512KB Flash,144KB SRAM，2x12bit 5Msps ADC，2x1Msps 12bit DAC，集成多路U(S)ART、I2C、SPI、QSPI、USB、CAN、1x SDIO通信接口，内置密码算法硬件加速引擎关键特性●内核CPU―32位ARM Cortex-M4 内核+ FPU，单周期硬件乘除法指令，支持DSP指令和MPU―内置8KB 指令Cache缓存，支持Flash加速单元执行程序0 等待―最高主频144MHz，180DMIPS●加密存储器―高达512KByte片内Flash，支持加密存储、多用户分区管理及数据保护，支持硬件ECC校验，10万次擦写次数，10年数据保持―144KByte片内SRAM（包含16KByte Retention RAM），Retention RAM支持硬件奇偶校验●时钟―HSE：4MHz~32MHz外部高速晶体―LSE：32.768KHz外部低速晶体―HSI：内部高速RC OSC 8MHz―LSI：内部低速RC OSC 40KHz―内置高速PLL―支持1路时钟输出，可配置为可配置系统时钟、HSE、HSI或PLL后分频输出●复位―支持上电/掉电/外部引脚复位―支持可编程的低电压检测及复位―支持看门狗复位●通信接口―7个U(S)ART接口, 最高速率达4.5 Mbps，其中3个USART接口（支持1xISO7816，1xIrDA，LIN），4个UART接口―3个SPI接口，速度高达36 MHz，其中2个支持I2S―1个QSPI接口，速率高达144 Mbps―4个I2C接口，速率高达1 MHz，主从模式可配，从机模式下支持双地址响应―1个USB2.0 Full speed Device接口―2个CAN 2.0A/B总线接口―1个SDIO接口，支持SD/MMC格式●高性能模拟接口―2个12bit 5Msps高速ADC，多种精度可配置，6bit 模式下采样率高达9Msps，多达18路外部单端输入通道，支持差分模式―2个12bit DAC，采样率1Msps―支持外部输入独立参考电压源―所有模拟接口支持1.8~3.6V全电压工作●最大支持97个支持复用功能的GPIOs，大多数GPIO支持5V耐压.●2个高速DMA控制器，每个控制器支持8通道，通道源地址及目的地址任意可配●RTC实时时钟，支持闰年万年历，闹钟事件，周期性唤醒,支持内外部时钟校准●定时计数器― 2 个16bit高级定时计数器，支持输入捕获、输出比较、PWM输出以及正交编码输入等功能，最高控制精度6.9nS。

接线图尺寸WH: 白色BK: 黑色BN: 棕色GN: 绿色YE: 黄色GY: 灰色PK: 粉红色BU: 蓝色RD: 红色VT: 紫色TRmm in.32012.6047018.5062024.4177030.3192036.22107042.13122048.03137053.94152059.84167065.7576029.92106041.73116045.67290440590 740890104011901340149016407301030113011.4217.3223.2329.1335.0440.9446.8552.7658.6664.5728.7440.5544.49XUSL p E A BC (± 3 mm)Dppp 016ppp 031ppp 046ppp 061ppp 076ppp 091ppp 106ppp 121ppp 136ppp 1512B 3B 4B 315465615 7659151065121513651515166575510551155 12.418.3124.2130.1236.0241.9347.8353.7459.6565.5529.7241.5345.47337487637 7879371087123713871537168777710771177 13.2719.1725.0830.9836.8942.848.754.6160.5166.4130.5942.446.34182071.65197077.561790194070.4776.38ppp 166ppp 1811815196571.4677.361837198772.3278.23762.99562.2752.95BDA C Ø = 5,8 mm (max.)Ø = 0.23 in. (max.)461.8126±11.04±0.4R U NT E S TE R R缆线颜色描述OSSD1K1_K2 反馈/重启Configuration_B0 Vdc FEOSSD2WH BU BN GN PK 0 V (加热系统)24 V a / c (加热系统)VTBK GY YE RD WH BU BN GN PK GY YE RD+ 24 Vdc Configuration_A 无加热系统带有加热系统缆线颜色描述+ 24 VdcFE0 V (加热系统)24 V a / c (加热系统)-0 VdcBN BN RD WH WH BU BU YE GY GYGN PK Configuration_0Configuration_1无加热系统带有加热系统BK 0 Vdc +24 Vdc12345FE 0 Vdc+24 Vdc Conf. 0Conf. 1XUSL ppp TBN WH BUGY BK0 Vdc +24 Vdc12345FE 0 Vdc+24 Vdc Conf. 0Conf. 1XUSL ppp TBN WH BUGY BK0 Vdc +24 Vdc12345678FE 0 Vdc+24 Vdc Conf._AK1_K2Feedback_Restart Conf._B OSSD1OSSD2XUSL ppp RBN GNGY WH BUYERD PK 0 Vdc +24 Vdc12345678FE 0 Vdc+24 Vdc Conf._AK1_K2Feedback_RestartConf._B OSSD1OSSD2XUSL ppp RRESTARTBN GN GYWH BUYE RD PK 12345678FE 0 Vdc+24 VdcConf._A K1_K2Feedback_RestartConf._B OSSD1OSSD2XUSL pppRRESTARTK2K10 Vdc +24 VdcBNGNGY WH BUYERDPK 0 Vdc +24 VdcK2K112345678FE 0 Vdc+24 Vdc Conf._AK1_K2Feedback_RestartConf._B OSSD1OSSD2XUSL ppp RBN GN GYWH BUYE RD PK 不遵守这些说明可能会导致人员死亡、严重伤害或设备损坏。