BU97933ACH-3BW中文资料

The Power Behind The Part.Valve ActuatorHyRAV ® Flex Series | SG SeriesIndex .......................................................1HyRAV ® Series ................................................2 Valve Actuator Overview .......................................2 Technical Data ..............................................3HyRAV ® Flex Series .............................................4HyRAV ® SG Series ..............................................5The IC Difference . (6)CONTENTSIndex1IndexThe compact and concentric design of the HyRAV ® hydraulic valve actuators utilize the helical gear principle. Reliable and powerful, the HyRAV ® series provides a safe solution that is easily adaptable to all valves even in the most severe conditions.single acting spring return fail-safedouble actingNamed the Flex after its many options, this HyRAV ® Series is highly customizable in many facets including control boxes, valve blocks, and more.HyRAV® FlexThe HyRAV ® SG, or SecondGeneration, is the standard valve actuator model offered by Eckart offering a compact, safe solution.HyRAV® SGValve Actuator Overview 2HyRAV® SeriesValve Actuator OverviewMore powerful, compact, safer•15 actuator sizes•Torques up to 2,210,000 in-lbs (250,000 Nm) at 3,045 psi (210 bar)•Through the concentric design, no radial forces are transmitted to the valve•Optimum cushioning protects the valve and actuator •Easy installation and adjustment to each valve •Maintenance free — no lubrication required •Suitable for on/off, control, and fail-safe operation •High repeat accuracy and very simple control of the ow rates•Very fast rotation speed (i.e., 90° in 0.2 sec) •Robust against extreme environmental conditions •Compact size with high torque output •Durable against vibrations•Designed to operate at 3,045 psi (210 bar) which provides more torque in a smaller actuator compared to actuators operating at 1,950 psi (135 bar)Advantages at a GlanceSeries TypesPower plants (coal, gas, oil, nuclear)Hydroelectric power plantsGeothermal power plants Solar thermal power plants Biogas power plants Exploration, offshoreRefineries Pipelines Tank farmsSteel hydraulics constructionWater treatment plants Seage treatment plants Drinking water distribution Shipbuilding & SubmarinesChemical / Pharmaceutical industryFood industryAir conditioningSteel millsIndustrial &Special SolutionsApplicationsIndustriesWaterPowerOil & GasMin. Operating Pressure Required 5 to 10 bar / 10 to 145 psiAngle of Rotation Quarter turn / 0-90°, 120°, or 180°+Position of Accuracy < 0.5° of full scaleMediumStandard hydraulic oil: mineral oil of groupAmbient Temperature -25 to +70°C / -13 to +158°F Protection Class IP68Valve Attachment Flange EN ISO 5211Double Acting Lifetime>100,000 operationsSingle Acting Lifetime (Fail-Safe)Dependent on the desired spring package Duty RatingS1 – 100%Operating Time Range 0.5 sec. to 200 sec.Max. Speed Fail-Safe As fast as 0.1 seconds(Dependent on the valve actuator size)Certificates/Approvals ATEX, SIL2/3, further inprocessing/planning, and as–required Materials, Standard Steel, GGG Seal Material, StandardPU / NBRHelical gear — double acting or single acting (spring return)210 bar / 3,000 psi Technical Data (Standard — Others on Request)Max. Allowable Operating PressureValve Actuator Type HyRAV ® Series3HyRAV® SeriesTechnical DataHyRAV ® FlexTechnical DataApplicationsHyRAV ® actuators can be customized to your application with seals, materials, and design modi cations.Inquire with our engineering team how we can support your requirements.Single ActingDouble Acting• Electrical / VisualPosition Indication • Manual Operation • Valve Blocks• HPU (Power Units)TypesOptionsHyRAV® Flex SeriesTechnical DataHyRAV ® Flex Series 4Technical DataModelsConnection KitTorquein-lbs (Nm) at 1,095 psi[135 bar]+0.002+0.052+0.005+0.130-0.000-0.000-0.000-0.000+0.002+0.062+0.005+0.130-0.000-0.000-0.000-0.000+0.002+0.062+0.006+0.160-0.000-0.000-0.000-0.000+0.002+0.074+0.006+0.160-0.000-0.000-0.000-0.000+0.002+0.074+0.007+0.190-0.000-0.000-0.000-0.000+0.002+0.074+0.007+0.190-0.000-0.000-0.000-0.000+0.003+0.087+0.007+0.190-0.000-0.000-0.000-0.000+0.003+0.087+0.007+0.190-0.000-0.000-0.000-0.000+0.003+0.087+0.008+0.220-0.000-0.000-0.000-0.000+0.003+0.100+0.008+0.220-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.000+0.003+0.100+0.009+0.250-0.000-0.000-0.000-0.0004,409(2,000)2003,306(1,500)AS250F602,210,000 (250,000)F48 – F6011.0232808.6612207.0861802,425(1,100)AS185F601,640,000 (185,000)F48 – F609.8422507.874AS125F481,110,000 (125,000)F40 – F488.661220AS100F48885,000 (100,000)F40 – F487.874200 6.4961651,984(900)AS063F40557,500 (63,000)F35 – F40 – F48 6.496165 5.118130 1.278(580)3.937100771(350)AS032F35283,200 (32,000)F30 – F35 – F40 5.118130 4.527AS024F35212,410 (24,000)F30 – F35 – F40 4.527115115992(450)AS016F30141,600 (16,000)F25 – F30 – F35 3.85898 2.95275440(200)AS012F30141,600 (16,000)F25 – F30 – F35 3.34685 2.75570352(160)2.165551,212(550)AS008F2570,900 (8,000)F16 – F25 – F30 2.83472 2.165AS006 sa F2553,100 (6,000)F16 – F25 – F25 2.8347255253(115)AS004F1635,400 (4,000)F14 – F16 – F25 2.36260 1.81146121(55)AS002F1417,700 (2,000)F12 – F14 – F16 1.88948 1.4173699 (45)AS001F128,850 (1,000)F10 – F12 – F14 1.41736 1.0622766 (30)AS000F104,420 (500)F07 – F10 – F12 1.102280.8662244(20)HyRAV® FlexHyRAV ® TypeValve Attachment Flange EN ISO 5211Hollow Shaft With Feather Keys (S)Hollow Shaft With Square (S)lbs (kg)Standard PossibleMax. Diameter Max. Sizein. (H9)mm (H9) in. (H11)mm (H11)Single ActingDouble ActingTypesHyRAV® SG SeriesTechnical DataHyRAV ® SG Series5Technical DataModelsConnection Kitin-lbs (Nm) at 1,095 psi [135 bar]in-lbs (Nm) at 3,045 psi[210 bar]+0.002+0.052+0.005+0.130-0.000-0.000-0.000-0.000+0.002+0.062+0.005+0.130-0.000-0.000-0.000-0.000+0.002+0.062+0.006+0.160-0.000-0.000-0.000-0.000+0.002+0.074+0.006+0.160-0.000-0.000-0.000-0.000SG 500F127,080 (800)F07 – F10 – F12Standard PossibleHyRAV ® TypeSG 250F103,540 (400)F05 – F07 – F10SG 125TBD 1,770 (200)TBD Valve Attachment Flange EN ISO 521192(42)8,850 (1,000)351.653421.377361.1813061(28)37 (17)SG 1000F1414,160 (1,600)F10 – F12 – F1450SG 2000F1626,550 (3,000)F12 – F14 – F161.9682.204561.41717,700 (2,000)HyRAV® SGTorqueHollow Shaft With Feather Keys (S)lbs (kg)Hollow Shaft With Square (S)Max. Diameterin. (H9)Max. Sizein. (H11)mm (H11)mm (H9)22 (10)1,150 (130)2,210 (250)4,420 (500)11.7(5.3)TBDTBD0.9440.9842524The IC Di erenceThe Power Behind the PartThe IC Difference6IC-Fluid Power, Inc. helps companies achieve sourcing excellence through a range of services including engineering and hydraulic component design, outsourcing partner selection and transition, strategic implementation and support, andlogistics management. We help provide sourcing strategies for organizations looking to expand their current scope for sourcing hydraulic components.We help engineers, purchasing departments and project managers source the worldfor hydraulic components without the need to invest signi cant time and resources developing an internal sourcing team, learning languages and cultures and establishing the direct relationships necessary to be successful. O ur experienced freight brokers ensure that freight moves quickly through customs and is delivered to your location on time, giving you peace of mind. IC-Fluid provides you with the solution, without the hassle.Our Broad In-House Capabilites:• Multi-lingual staff • Deep product knowledge • Experienced freight brokers •Factory authorized and trainedrepairs• Highly customized hydraulic systems • Product demonstrations • Project management • Replacement parts•Technical expertise and supportOur Industries:• Aerospace • Agriculture • Construction• Energy • Entertainment• Marine &Offshore• Material Handling• Metals • Military • Mining • Packaging • Plastics & Injection Molding • Transportation • Waste-Management Connecting you to world-class quality hydraulic componentsHyRAV Valve Actuator Catalog v2 / June 23www.ic +1.419.661.8811 Tel +1.419.661.8844 Faxus@ic https:// 713.592.0869 Tel ****************IC-Fluid Power, Inc.63 Dixie Hwy Rossford, OH 43460Distrubition Partner: ValvACT, Inc. 5904 Jessamine St., Suite A-18Houston, TX 77081。

RCS9793/9794 调试说明南京南瑞继保电气有限公司NARI-RELAYS ELECTRIC CO.LTD.二○○三年二月目录1. RCS9793、RCS9794组态工具的使用说明 (1)§1 组态工具的安装 (1)§2 如何添加新规约和新装置信息 (1)§3 独立管理机RCS9794的组态说明 (1)§4 级联管理机RCS9793的组态说明 (8)§5 使用组态工具的下载文件及对时功能 (9)2. ARM板程序的调试命令及解释 (12)3. ARM板FTP功能的启用及程序的下载说明 (14)1RCS9793、RCS9794组态工具的使用说明§1 组态工具的安装打开RCS9793组态工具安装目录，在disk1目录下打开setup.exe运行安装程序，在默认的情况下，RCS9793组态工具的安装目录为：C:\Program Files\NARI-RELAY\RCS9793组态工具。

为了以后使用的方便，建议装在C盘的根目录下，及为：C:\ RCS9793组态工具。

§2如何添加新规约和新装置信息在RCS9793组态工具目录下，打开ini目录，将装置组态信息文本和规约文本加入。

在该目录下有几个特殊的文件，说明如下表：表1－1 RCS9793组态工具特殊文件说明如果需要加入一个新类型装置，步骤如下：（1）将新类型装置的组态信息文本文件拷贝到ini 目录下，装置组态信息文本的文件名格式如下：装置类型-版本号.ini，如RCS901A-2.00.ini、LFP-901A-1.00.ini ；（2）打开DevList.txt，加入装置类型名称，格式如下（每一种装置类型占一行）：序号, 装置ID号, “装置类型”, “版本号”，这里序号和ID号要唯一，但可以不相同。

如现在要加入一个新装置，该装置的组态文本信息的文件名为LFP-963A-1.00.ini，则在DevList.txt中另起一行，输入8,8,”LFP-963A”,”1.00”，保存文件就行了。

部门位置主机名使用者品牌ServicePack CPU TypeMotherboardModeMemoryVideoAdapterMonitor Disk DriveOpticalDrive机柜DC01文件服务器DELLWindowsServer 2003Service Pack2QuadCoreIntel XeonE5506, 1600MHz (12 x133)DellPowerEdgeR7104GMatroxGraphicsG200eW(Nuvoton) (8MB)2× 500G,SerialAttachedScsi, 15K,3.5,Seagate,EagleTEAC DVD-ROM DV-28SW机柜QBSERVER K3服务器DELLWindowsServer 2003Service Pack2QuadCoreIntel XeonX5350, 2666MHz (10 x267)DellPowerEdge29504GATI ES1000(16 MB)146G+1THL-DT-STDVD-ROM GDR-T10N机柜APP远程服务器LENOVOWindowsServer 2003Service Pack2QuadCoreIntel XeonE5330,2133 MHz(8 x 267)Lenovo WQR510 G62G ATI ES1000ATAST3500320ASSCSI DiskDevice (500GB, 7200RPM, SATA-II)HL-DT-STCD-ROM GCR-8482B (48xCD-ROM)机柜MAIL邮件服务器DIYWindowsServer 2003Service Pack2IntelCeleron D315, 2266MHzECS845PE-A800512 MBMatroxGraphicsMillenniumG550 AGP (32MB)ST380011A(80 GB, 7200RPM, Ultra-ATA/100)HL-DT-STCD-RW GCE-8481B财务财务室FIN01何敏珊DIY Service Pack3DualCoreAMD Athlon64 X2, 2200MHz (11 x200) 4200+Asus M2N-XPlus1G (DDR2SDRAM)NVIDIAGeForce 7300GT (256 MB)LG L1753S[17" LCD]ST3160815AS(160 GB,7200 RPM,SATA-II)ASUS DVD-E818A财务财务室FIN02邓雪娴LENOVO Service Pack3DualCoreIntelPentiumE2200, 2200MHz (11 x200)ECS G31T-LM1G (DDR2SDRAM)Lenovo LENL174 [17"LCD]ST3160815AS(160 GB,7200 RPM,SATA-II)TSSTcorpDVD-ROM TS-H353B财务财务室FIN03潘小洁LENOVO Service Pack3DualCoreIntelPentiumE2180, 2000MHz (10 x200)IntelLakeport-Gi945G/GC/GZ1G (DDR2SDRAM)Lenovo LXM-L17AB [17"LCD]WDCWD1600AAJS-08B4A0 (160GB, IDE)OptiarcDVD-ROMDDU1671S财务财务室报税邓雪娴LENOVO XP HomeEdition 财务财务室Server黄有芬DIY Windows2000财务财务室User88罗顺平DIY Windows2000财务财务室user李巧玉LENOVO Service Pack3Intel(R)Pentium(R)CPU G630 @2.70GHzIntelCougar PointH61, IntelSandy Bridge2G (DDR3SDRAM)Lenovo LENL2021wD [19"LCD]1000GHL-DT-STDVD-RAMGH70N人事旧厂三楼HR0祝文海DIY Service Pack3 DualCoreIntelPentium D820, 2800MHz (14 x200)Onda 945PLN2G (DDR2SDRAM)NVIDIAGeForce 7300SE/7200 GS(256 MB)LG W1942(Analog)[19" LCD]ST380817AS(80 GB, 7200RPM, SATA)人事旧厂三楼HR02潘丽婷DIY Service Pack3IntelPentium 4630, 3000MHz (15 x200)Foxconn6627MASeries1G (DDR2SDRAM)NVIDIAGeForce 7100GS (512 MB)LG W1942(Analog)[19" LCD]WDCWD800BD-22MRA1 (66GB, IDE)TECLASTCHB52E人事新厂三楼HR03何书云DIY Service Pack3AMD Athlon64, 1800 MHz(9 x 200)3000+Onda N61P2G（DDR2）Proview775/776/778[17" CRT]SAMSUNGHD161HJ41R0186LEN(160 GB,7200 RPM,SATA-II)TSSTcorpDVD-ROM TS-H352D(16x/48xDVD-ROM)人事旧厂三楼SYS01梁杰鹏LENOVO Service Pack3DualCoreIntel Corei3-2100,3100 MHz (31x 100)IntelCougar PointP673 GB (DDR3SDRAM)AMD RADEONHD 6450(1024 MB)Lenovo LENL2021wD [19"LCD]ST31000528AS(1000 GB,7200 RPM,SATA-II)PLDS DVD-RWDH16ABSH生产旧厂三楼MA01钟永飞DIY Service Pack2DualCoreAMD Athlon64 X2, 2200MHz (11 x200) 4200+Asus M2N-XPlus1G（DDR2）NVIDIAGeForce 6600LE (256 MB)17’CRTST3160815AS(160 GB,7200 RPM,SATA-II)ASUS DVD-E818A生产旧厂三楼MA02莫雨静DIY Service Pack3DualCoreAMD Athlon64 X2, 2400MHz (12 x200) 4600+Asus M2A-MX1G（DDR2）17’CRTMAXTORSTM3160215AS(160 GB,7200 RPM,SATA-II)ATAPI DVD DDH16D2P 佛山市奇宝乐园服装有限公司电脑盘点表Storage: Motherboard:Display:Computer:生产裁床MA03管希荣LENOVO Service Pack3DualCoreIntelCeleronE3200, 2400MHz (12 x200)ECS G31T-LM2G（DDR2）17’CRTWDCWD1600AAJS-08L7A0 (149GB, IDE)ATAPI DVD DDH16D5S生产裁床MA04邓艺忠DIY Service Pack3 AMD SempronLE-1100,1900 MHzDamtin D-MC61S1G（DDR2）NEC LCD72V[17" LCD]MAXTORSTM380815AS(80 GB, 7200RPM, SATA-II)生产新厂三楼MA05DIY Service Pack3IntelPentium 4630, 3000MHz (15 x200)GigabyteGA-G41M-ES2L1G（DDR2）17’CRTWDCWD800BD-22MRA1 (66GB, IDE)HL-DT-STDVD-ROMGDR8164B生产旧厂三楼MA06梁丽思DIY Service Pack3DualCoreAMD Athlon64 X2, 2400MHz (12 x200) 4600+FoxconnA6VMX(-K)1G（DDR2）BenQ G900W(Analog)[19" LCD]ST3250310AS(250 GB,7200 RPM,SATA-II)TSSTcorpDVD-ROM TS-H352D生产布仓MA07叶顺岳DIY Service Pack3AMD SempronLE-1100,1900 MHz(9.5 x 200)soyoSY-A78M3-GR1G（DDR2）17’CRTSAMSUNGHD161HJ SCSIDisk Device(160 GB,7200 RPM,SATA-II)TSSTcorpDVD-ROM TS-H352D生产布仓MA08陈万兴DIY Service Pack3IntelCeleron 420,1600 MHz (8x 200)Asus P5VD2-VM SE1G（DDR2）17’CRTMAXTORSTM380815AS(80 GB, 7200RPM, SATA-II)ASUS DVD-E818A生产布仓MA09莫宏玉DIY Service Pack3IntelPentium 4,2800 MHzEpox EP-4PDA6(I)1024 MBDDR400ATI Radeon9550 / X1050SeriesSecondary(128 MB)LG L1753S[17" LCD]WDCWD300JD-08JHC0 (28GB, IDE)ASUS DVD-E616P2生产辅料仓MA10李振炎DIY Service Pack3DualCoreIntelPentiumE2200, 2200MHzGigabyteGA-G31M-S2C2G (DDR2SDRAM)Asus VW193D[19" LCD]WDCWD3200AAJS-00B4A0 (320GB, IDE)PIONEERDVD-ROM DVD-130P生产成品仓MA11黄星DIY Service Pack3DualCoreIntelPentiumE2160, 1800MHz (9 x200)Onda N73PV1G（DDR2）17’CRTST3160815AS(160 GB,7200 RPM,SATA-II)ASUS DVD-E818A生产裁床MA12刘志鲳DIY Service Pack3IntelCeleron D336, 2800MHzOnda 945PLN1G (DDR2SDRAM)NVIDIAGeForce 7100GS (512 MB)Daewoo719BF [17"CRT]ST380011A(80 GB, 7200RPM, Ultra-ATA/100)TeclastDHB16H生产布仓MA13黄剑波DIY Service Pack3IntelCeleron D331, 2666MHz (20 x133)GigabyteGA-8I945PLGE-RH1 GB (DDR2SDRAM)NVIDIAGeForce 7300LE (512 MB)17’CRTWDCWD1600JS-55MHB0 (160GB, IDE)LITE-ON DVDSOHD-16P9SV生产布仓MA14潘宝文LENOVO Service Pack3DualCoreIntelPentiumE6600, 3066MHz (11.5 x267)LenovoYangTianA4600K2G (DDR3SDRAM)Lenovo LENL1950wDWDCWD5000AAKS-08WWPA0 (465GB, IDE)TSSTcorpDVD-ROM TS-H353C(16x/48xDVD-ROM)生产旧厂三楼MA15卜丽萍LENOVO Service Pack3DualCoreIntel Corei3-2120,3300 MHz (33x 100)Intel CougarPoint H61,Intel SandyBridge2G (DDR3SDRAM)NVIDIAGeForce 405(512 MB)Lenovo LENL2021wA [20"LCD]ST3500413AS(465 GB,IDE)PLDS DVD-RWDH16ABSH生产旧厂一楼MA16杨斌强LENOVO Service Pack3DualCoreIntelPentiumE6700, 3200MHz (12 x267)IntelEaglelakeG412G (DDR3SDRAM)Lenovo LENL2021wA [20"LCD]WDCWD5000AAKX-083CA1 (465GB, IDE)PLDS DVD-RWDH16ABSH生产裁床MA17李海彬LENOVO Service Pack3Intel(R)Pentium(R)CPU G630 @2.70GHzIntelCougar PointH612G (DDR3SDRAM)AMD RadeonHD 6350Graphics(512 MB)Lenovo LENL2021wA [20"LCD]ST3500413AS(465 GB,IDE)PLDS DVDROMDH16D6SH设计设计室DES01陈辉尧DIY Service Pack3DualCoreIntelPentiumE2160, 1800MHz (9 x200)Onda 945PLN1G (DDR2SDRAM)NVIDIAGeForce 7300GT (128 MB)Lenovo LENL2021wD [20"LCD]WDCWD1600JS-55MHB0 (160GB, IDE)ATAPI DVD DDH16D3P设计设计室DES02罗钻好DIY Service Pack3DualCoreIntelPentiumE6500, 2933MHz (11 x267)Asus P5QLSE2G (DDR2SDRAM)NVIDIAGeForce GT220 (1024MB)BenQ FP73G(Analog)[17" LCD]WDCWD5000AADS-00S9B0 (465GB, IDE)PIONEERDVD-ROM DVD-230P设计设计室DES03李小娟DIY Service Pack3DualCoreIntelPentiumE6500, 2933MHz (11 x267)Asus P5QLSE2G (DDR2SDRAM)NVIDIAGeForce GT220 (1024MB)BenQ FP73G(Analog)[17" LCD]WDCWD5000AADS-00S9B0 (465GB, IDE)PIONEERDVD-ROM DVD-230P设计设计室DES04曾向兰DIY Service Pack3DualCoreIntel Core 2Duo E4600,2400 MHz (12x 200)Asus P5KPro2G (DDR2SDRAM)RadeonX300/X550/X1050 SeriesSecondary(256 MB)17’LCDWDCWD5000AADS-00S9B0 (465GB, IDE)PIONEERDVD-ROM DVD-129P设计设计室DES05叶容婷DIY Service Pack3DualCoreIntelPentiumE6500, 2933MHzAsus P5B SE2G(1G×2DDR2)NVIDIAGeForce 8600GTS (256 MB)17’CRTMAXTORSTM3250310AS(250 GB,7200 RPM,SATA-II)ASUS DVD-E818A设计设计室DES06廖铁梅DIY Service Pack3DualCore AMDAthlon 64X2, 2300 MHz(11.5 x 200)4400+Asus M2V-MXSE2G (DDR2SDRAM)LG FlatronT713SH [17"CRT]MAXTORSTM380815AS(80 GB, 7200RPM, SATA-II)ASUS DVD-E818A设计旧厂三楼DES07谭惠琼DIY Service Pack3DualCoreIntelPentiumE2140, 1600MHz (8 x200)Onda 965PD1.5G (DDR2SDRAM)NVIDIAGeForce 7300GT (128 MB)LG FlatronT713SH [17"CRT]ST3160815AS(160 GB,7200 RPM,SATA-II)TSSTcorpCD/DVDW TS-H652D设计设计室DES08周宗万LENOVO Service Pack3DualCoreIntelPentiumE6600, 3066MHz (11.5 x267)LenovoYangTianA4600K2G (DDR3SDRAM)Lenovo LENL1950wDWDCWD5000AAKS-08WWPA0 (465GB, IDE)TSSTcorpDVD-ROM TS-H353C(16x/48xDVD-ROM)设计设计室DES09丁琼瑛DIY Service Pack3IntelCeleron D331, 2666MHz (20 x133)ASRock775XFire-VSTA512 MB (DDR2SDRAM)NVIDIAGeForce 7300SE (128 MB)17’CRTMAXTORSTM380811AS(80 GB, 7200RPM, SATA-II)ATAPI DVD DDH16D2P设计设计室DES10莫爱花DIY Service Pack3DualCoreIntelPentiumE2160, 1800MHz (9 x200)GigabyteGA-G41MT-D32G (DDR3SDRAM)17’CRTWDCWD5000AADS-00S9B0 (500GB, IDE)ASUS DRW-2014S1设计设计室DES11陈丽贞DIY Service Pack3DualCoreAMD Athlon64 X2, 2300MHz (11.5 x200) 4400+Asus M2N-VMDVI2G (DDR2SDRAM)LG FlatronT713SH [17"CRT]SAMSUNGHD161HJ (160GB, 7200RPM, SATA-II)TSSTcorpDVD-ROM TS-H352D设计设计室DES12梁素梅LENOVO Service Pack3DualCoreIntel Corei3-2120,3300 MHz (33x 100)Intel CougarPoint H61,Intel SandyBridge2G (DDR3SDRAM)NVIDIAGeForce 405(512 MB)Lenovo LENL2021wA [20"LCD]ST3500413AS(465 GB,IDE)PLDS DVD-RWDH16ABSH设计设计室DES13王冬映LENOVO Service Pack3DualCoreIntel Corei3-2100,3100 MHz (31x 100)IntelCougar PointP673 GB (DDR3SDRAM)AMD RADEONHD 6450(1024 MB)BenQ FP73G(Digital)[17" LCD]ST31000528AS(1000 GB,7200 RPM,SATA-II)PLDS DVD-RWDH16ABSH设计设计室DES14盘连芳LENOVO Service Pack3DualCoreIntel Corei3-2100,3100 MHz (31x 100)IntelCougar PointP673 GB (DDR3SDRAM)AMD RADEONHD 6450(1024 MB)Lenovo LENL2021wD [20"LCD]ST31000528AS(1000 GB,7200 RPM,SATA-II)PLDS DVD-RWDH16ABSH设计设计室DES15吴显莲DIY Service Pack3DualCoreAMD Athlon64 X2, 2300MHz (11.5 x200) 4400+Onda N78G51G (DDR2SDRAM)Lenovo LENL2021wD [20"LCD]WDCWD5000AAKX-001CA0 (465GB, IDE)HL-DT-STDVD-ROMGDR8164B设计设计室DES16石志坚DIY Service Pack3DualCoreIntelPentium D820, 2800MHz (14 x200)GigabyteGA-8I945PLGE-RH1G (DDR2SDRAM)NVIDIAGeForce 7300LE (512 MB)SamsungSyncMasterE1920NWMAXTORSTM380815AS(80 GB, 7200RPM, SATA-II)LITE-ON DVDSOHD-16P9SV设计设计室DES17付贇LENOVO Service Pack3Intel(R)Pentium(R)CPU G630 @2.70GHzIntelCougar PointH61, IntelSandy Bridge2G (DDR3SDRAM)AMD RadeonHD 6350Graphics(512 MB)Lenovo LENL2021wD [19"LCD]WDCWD5000AAKX-083CA1 (465GB, IDE)HL-DT-STDVD-RAMGH70N暂存DIY Service Pack3IntelCeleron D331, 2666MHzASRock775XFire-VSTA IntelAlderwoodi925X1 G (DDR2SDRAM)NVIDIAGeForce 7300GT (128 MB)17’CRTMAXTOR40GIDELITE-ON CD-RW SOHR-5239V新兴办公室王小丽DIY 新兴成品仓LENOVO 新兴辅料仓LENOVO会议室报废原三楼办公室考勤用DIY已报废原新厂考勤用DIY已报废饭堂报废CodeSerialNumber使用日期1HDP13X2011年1月184SR1S2007年12月2007年1月磁盘阵列芯片故障，USB接口故障2005年4月2008年1月板卡接口松动SS0901********年10月SS086883962008年5月主板电容老化2012年7月2006年5月2007年1月2008年1月原主板报废 SS138751272011年4月2008年1月显卡维修记录2008年1月SS118976652010年4月2008年1月2007年3月2008年6月主板维修记录2008年1月原主板报废2008年1月2004年12月2009年1月2008年1月2007年5月2006年9月SS141066182011年6月SA126416722012年4月SS143132602011年7月SS143519902011年12月2008年1月2010年4月2010年4月2008年1月替换2G内存硬盘更换记录2008年1月主板CPU不兼容2008年1月2008年2月SS141059752011年6月2007年5月2010年9月2008年1月主板维修记录硬盘故障已更换SA127335712012年4月 SS138755132011年4月SS138947902011年4月2007年10月 Asus M2N-VM DVI主板报废2006年4月SS245290222012年8月2007年5月2004年12月2012年6月2012年4月。

Hardware system of modular design for stackable wooden partitions up to 100 and 150 kg (220 and 330 lbs.) per panel.D e s c r i p t i o nThanks to the modular track system and its unrivalled cornering technique, Hawa Variotec 150 H enables the quick realization of all design concepts for room partitions. This hardware system allows straight running tracks / bottom guide channels and curved segments of 15, 30, 45, 60, 75 and 90 degrees to be combined to form custom-ized configurations. Different trolleys are required depending on the door weight (100 or 150 kg / 220 or 330 lbs.).Test certificates ot the Landesgewerbeanstalt Bayern (LGA) in Nuremberg confirm the hardware system‘s high functionality and resistance to wear.In principle, a version without bottom guide channels is possible. However, we recommend using them since this makes opening and closing the partitions more convenient.A p p l i c a t i o n sThis hardware system is suitable for use wherever high quality and quiet operation are called for, e.g. in hotels, restaurants, banks, open-plan offices and exclusive interior designs.F e a t u r e s o f t h e H a w a V a r i o t e c150H•Modular system•Trolley with two-point guide•Progressively adjustable height + 6 /-••Minimum axis radius 4000 mm (13'••Secure locking•Small space requirement in stacking areaL a y o u t e x a m p l e sThe layout examples shown below demonstrate the many varied and creative application possibilities of the Hawa Variotec 150 H hard- ware system.D o o r t y p e sDifferent door types can be combined to accommodate customized design preferences and creative solutions.Suspension profile: 10347 /11004Cover cap: 20907Suspension profile: 14232Cover cap: 14211Brush seal: 16797 /13791P a n e l c e n t e r i n gDoor panels must be centred to ensure flush fitting.Version AWith customer-suppliedwooden stripsVersion BWith Hawa seal profile,plain anodised aluminium (13528)including black rubber profile (13571)P r o t e c t i v e e d g e t r i m sE x a m p l e 1: L o c ki n g a t h a n d l e h e i g h tBar bolt lock code 19592 allows locking the sliding door at handle height.E x a m p l e 2:F l o o r l o c k i n gThe deadbolt lock code 10726 provides unobtrusive, barely visible locking at the panel bottom edge.Locking with bottom guide channelLocking with floor-mounted sleeve code 13787Q u o t e p r e p a r a t i o n a n d d e s i g nWe require the following details to prepare a quote and design version for you:•Clearance dimensions•Quantity of sliding doors•Quantity of pivot doors•Quantity of sliding pivot doors•Door width•Door height•Door thicknessO r d e r s p e c i f i c a t i o n s•Quantity and type of components for sliding doors, pivot doors and sliding pivot doors•Quantity, type and length of running track •Quantity and type of running track accessories •Quantity, type and length of bottom guide channel •Quantity and type of bottom guide channel accessories •Quantity and length of seal profile•Quantity and length or rubber profile•Quantity, type and length of Hawa protective edge trim •Quantity and type of locks•Quantity and type of lock accessoriesP l a n n i n g/i n s t a l l a t i o nFor planning and installation purposes, please use the installation drawing code 21718 (parallel) or 21719 (90°) (→ www.hawa.ch → Hawa Productfinder)。

DEVICE SPECIFICATIONSNI 5783Four Channel Transceiver Adapter ModuleThis document lists specifications for the NI 5783 adapter module. Pair these specifications with the specifications listed in your FlexRIO FPGA module specifications document or your Controller for FlexRIO specifications document.Caution The protection provided by the NI 5783 can be impaired if it is used in amanner not described in this document.Caution To avoid permanent damage to the NI 5783, disconnect all signalsconnected to the NI 5783 before powering down the module, and only connectsignals after the module has been powered on by the FlexRIO FPGA module or theController for FlexRIO.Note All numeric specifications are typical unless otherwise noted. All graphsillustrate the performance of a representative module.Specifications are subject to change without notice. For the most recent device specifications, visit /manuals.ContentsFlexRIO Documentation (2)Analog Input (3)General Characteristics (3)Typical Specifications (4)Analog Output (9)General Characteristics (9)Typical Specifications (10)CLK/REF IN (13)TRIG General Characteristics (14)AUX I/O (Port 0 DIO <0..3>, Port 1 DIO <0..3>, and PFI <0..3> (15)Power (15)Physical (15)Environment (16)Operating Environment (16)Storage Environment (16)Shock and Vibration (16)Compliance and Certifications (17)Safety (17)Electromagnetic Compatibility (17)CE Compliance (17)Online Product Certification (18)Environmental Management (18)FlexRIO Documentation2| | NI 5783 SpecificationsTable 1. FlexRIO Documentation Locations and Descriptions (Continued)Analog InputGeneral CharacteristicsNumber of channels Four, single-ended, simultaneously sampled Connector Type HDBNC (high-density BNC)Input type50 ΩInput coupling DCNI 5783 Specifications| © National Instruments| 3Sample rateInternal Sample Clock100 MHzExternal Sample Clock60 MHz to 100 MHzAnalog-to-digital converter (ADC)Type Quad, 16-bitPart number AD9653Related InformationFor more information about the ADC, refer to the AD9653 datasheet at . Typical SpecificationsFull-scale input range (normal operating conditions)Elliptic 2.030 V pk-pkButterworth 2.037 V pk-pkDC accuracyElliptic±[(0.80% × reading) + 3.5 mV]Butterworth±[(1.00% × reading) + 3.75 mV]Input impedanceElliptic50 Ω ± 0.5%Butterworth50 Ω ± 0.8%Bandwidth (-3 dB)Elliptic39.4 MHzButterworth39.5 MHzNote All AI spectral performance values apply to both the Elliptic and Butterworthvariants.1Measured at 10.1 MHz with a -1 dBFS signal adjusted to full-scale.2Calculated from SINAD corrected to fullscale.3Measured at 10.1 MHz with a -1 dBFS signal.4| | NI 5783 SpecificationsTable 3. AI Noise Spectral DensityNote All AI channel crosstalk values apply to both the Elliptic and Butterworth variants.Figure 1. AI CrosstalkAmplitude(dBc)Frequency (Hz)NI 5783 Specifications| © National Instruments| 5Figure 2. AI Frequency Response (Zoomed Out)N o r m a l i z e d A m p l i t u d e t o 100 k H z (d B )Frequency (Hz)Figure 3. AI Frequency Response (Zoomed In)N o r m a l i z e d A m p l i t u d e t o100 k H z (d B )Frequency (Hz)6 | | NI 5783 SpecificationsFigure 4. AI Step Response (Butterworth)A m p l i t u d e (V )1–50 m050 m100 m 150 m 200 m 250 m 300 m 350 m 400 m 450 m 500 m 550 m 600 m 650 m 700 m 750 m 800 m 850 m 900 m 950 m Time (ns)20020–10406080100120140160180Figure 5. AI Step Response (Elliptic)A m p l i t u d e (V )–50 m050 m100 m 150 m 200 m 250 m 300 m 350 m 400 m 450 m 500 m 550 m 600 m 650 m 700 m 750 m 800 m 850 m 900 m 950 m 1Time (ns)20020–10406080100120140160180NI 5783 Specifications | © National Instruments | 7Figure 6. AI Spectral (10.1 MHz at -1 dBFS input signal, 6.1 kHz RBW, 10 Averages)A m p l i t u d e (dB F S )0–120–115–110–105–100–95–90–85–80–75–70–65–60–55–50–45–40–35–30–25–20–15–10–5Frequency (Hz)50 M0 2 M6 M10 M14 M18 M22 M26 M30 M34 M38 M42 M46 MNote AI Spectral figure applies to both the Elliptic and Butterworth variants.Figure 7.AI Return LossA m p l i t u d e (dB )Frequency (Hz)8 | | NI 5783 SpecificationsAnalog OutputGeneral CharacteristicsNumber of channels Four, single-ended, simultaneously updated Connector type HDBNC (high-density BNC)Output type50 ΩOutput coupling DCDigital-to-analog converter (DAC)Type Quad, 16-bitPart number DAC3484Minimum analog input to analog output response time4100 MS/s1130 ns200 MS/s720 ns400 MS/s550 nsRelated InformationFor more information about the DAC, refer to the DAC3484 datasheet at .4Minimum time to digitize a signal (AI) and output a response (AO). Time measured from signal entering the AI connector, passing into and out of the LabVIEW FPGA diagram, and observed at the AO connector.5400 MS/s with 2x interpolation is available only when operating in 2 channel analog output mode.NI 5783 Specifications| © National Instruments| 9Typical SpecificationsFull-scale output range (normal operation conditions)50 Ω 1.001 V pk-pk High-Z2.002 V pk-pkDC accuracy (into High-Z)±[(2.0% × desired voltage) + 4.4 mV]Output impedance 50 Ω ± 0.7%SFDR 6-81 dBcTable 6. AO Noise Spectral Density (into 50 Ω)Table 7. AO Channel Crosstalk (10 MHz)Figure 8. AO Crosstalk (into 50 Ω Load)A m p l i t u d e (dB c )Frequency (Hz)610.1 MHz tone at -1 dBFS.10 | | NI 5783 SpecificationsFigure 9. AO Frequency Response Across Data RateN o r m a l i z e d A m p l i t u d e t o 100 k H z (d B )0–10–9.5–9.0–8.5–8.0–7.5–7.0–6.5–6.0–5.5–5.0–4.5–4.0–3.5–3.0–2.5–2.0–1.5–1.0–0.5Frequency (Hz)Figure 10. AO Phase Noise (Signal at 12.1 MHz)A m p l i t u d e (dB c /H z )–95–155–150–145–140–135–130–125–120–115–110–105–100Offset from Carrier (Hz)1 M101001 k10 k100 k–160NI 5783 Specifications | © National Instruments | 11Figure 11. AO Return LossA m p l i t u d e (dB )0–32–30–28–26–24–22–20–18–16–14–12–10–8–6–4–2Frequency (Hz)300 M10 M40 M60 M80 M 100 M 120 M 140 M 160 M 180 M 200 M 220 M 240 M 260 M 280 M Figure 12. AO Two Tone, Each T one at -7 dBFS, 69.95 MHz, and 70.05 MHz, 500 HzRBW0–95–90–85–80–75–70–65–60–55–50–45–40–35–30–25–20–15–10–5Frequency (Hz)70.5 M69.5 M69.6 M 69.7 M 69.8 M 69.9 M 70.0 M 70.1 M 70.2 M 70.3 M70.4 M A m p l i t u d e (d B m )Note The noise floor in the above figure is limited by the noise floor of themeasurement device. Refer to the AO Noise Spectral Density table for more information.12 | | NI 5783 SpecificationsCLK/REF INConnector type HDBNC (high-density BNC)Input impedance50 ΩInput coupling ACReference input voltage range0.75 V pk-pk to 5.2 V pk-pkSample Clock input voltage range0.4 V pk-pk to 5.2 V pk-pkAbsolute maximum voltage±8.0 VDC, 8.0 V pk-pk ACDuty cycle45% - 55%Internal VCXO phase noise10 Hz-80 dBc/Hz100 Hz-110 dBc/Hz1 kHz-140 dBc/Hz10 kHz-150 dBc/Hz100 kHz-155 dBc/Hz1 MHz-160 dBc/Hz10 MHz-162 dBc/Hz7Default clocking configuration.NI 5783 Specifications| © National Instruments| 13Figure 13. Internal Sample Clock Phase NoiseA m p l i t u d e (dB c /H z )–85–175–170–165–160–155–150–145–140–135–130–125–120–115–110–105–100–95–90Offset Frequency (from carrier)10 M101001 k10 k100 k1 MTRIG General CharacteristicsNumber of channels 1, single-ended Connector type HDBNC Coupling DCImpedanceInput 10 kΩOutput 50 ΩLogic level 3.3 V LVCMOS V oltageV IH_MIN 2 V V IL_MAX0.8 V V OH_MIN (unloaded) 3.1 V V OL_MAX (unloaded)0.2 VAbsolute maximum voltage±20 VDC, +21 dBm (7.1 V pk-pk )14 | | NI 5783 SpecificationsAUX I/O (Port 0 DIO <0..3>, Port 1 DIO <0..3>, and PFI <0..3>Number of channels12 bidirectional (8 DIO and 4 PFI) Connector type HDMIInterface standard 3.3 V LVCMOSInterface logicMaximum V IL0.8 VMinimum V IH 2.0 VMaximum V OL0.4 VMinimum V OH 2.7 VMaximum V OH 3.6 VZ out50 Ω ± 20%I out (DC)±2 mAPull-down resistor150 kΩRecommended operating voltage-0.3 V to 3.6 VOvervoltage protection±10 VMaximum toggle frequency100 MHz+5 V maximum current10 mA+5 V voltage tolerance 4.2 V to 5 VPowerTotal power, typical operation 4.6 WPhysicalDimensions12.9 x 2.0 x 12.1 cm (5.1 x 0.8 x 4.7 in.) Weight420 g (14.8 oz)Front panel connectors Ten HDBNC and one HDMINI 5783 Specifications| © National Instruments| 15EnvironmentMaximum altitude2,000 m (800 mbar) (at 25 °C ambienttemperature)Pollution Degree2Indoor use only.Operating EnvironmentAmbient temperature range0 °C to 55 °C (Tested in accordance withIEC 60068-2-1 and IEC 60068-2-2. MeetsMIL-PRF-28800F Class 3 low temperaturelimit and MIL-PRF-28800F Class 2 hightemperature limit.)Relative humidity range10% to 90%, noncondensing (Tested inaccordance with IEC 60068-2-56.) Storage EnvironmentAmbient temperature range-20 °C to 70 °C (Tested in accordancewith IEC 60068-2-1 and IEC 60068-2-2. MeetsMIL-PRF-28800F Class 3 limits.)Relative humidity range5% to 95%, noncondensing (Tested inaccordance with IEC 60068-2-56.)Shock and VibrationOperating shock30 g peak, half-sine, 11 ms pulse (Tested inaccordance with IEC 60068-2-27. MeetsMIL-PRF-28800F Class 2 limits.)Random vibrationOperating 5 Hz to 500 Hz, 0.3 g rmsNonoperating 5 Hz to 500 Hz, 2.4 g rms (Tested in accordancewith IEC 60068-2-64. Nonoperating testprofile exceeds the requirements ofMIL-PRF-28800F, Class 3.)16| | NI 5783 SpecificationsCompliance and CertificationsSafetyThis product is designed to meet the requirements of the following electrical equipment safety standards for measurement, control, and laboratory use:•IEC 61010-1, EN 61010-1•UL 61010-1, CSA 61010-1Note For UL and other safety certifications, refer to the product label or the OnlineProduct Certification section.Electromagnetic CompatibilityThis product meets the requirements of the following EMC standards for electrical equipment for measurement, control, and laboratory use:•EN 61326-1 (IEC 61326-1): Class A emissions; Basic immunity•EN 55011 (CISPR 11): Group 1, Class A emissions•EN 55022 (CISPR 22): Class A emissions•EN 55024 (CISPR 24): Immunity•AS/NZS CISPR 11: Group 1, Class A emissions•AS/NZS CISPR 22: Class A emissions•FCC 47 CFR Part 15B: Class A emissions•ICES-001: Class A emissionsNote In the United States (per FCC 47 CFR), Class A equipment is intended foruse in commercial, light-industrial, and heavy-industrial locations. In Europe,Canada, Australia, and New Zealand (per CISPR 11), Class A equipment is intendedfor use only in heavy-industrial locations.Note Group 1 equipment (per CISPR 11) is any industrial, scientific, or medicalequipment that does not intentionally generate radio frequency energy for thetreatment of material or inspection/analysis purposes.Note For EMC declarations, certifications, and additional information, refer to theOnline Product Certification section.CE ComplianceThis product meets the essential requirements of applicable European Directives, as follows:•2014/35/EU; Low-V oltage Directive (safety)•2014/30/EU; Electromagnetic Compatibility Directive (EMC)NI 5783 Specifications| © National Instruments| 17Online Product CertificationRefer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for this product, visit / certification, search by model number or product line, and click the appropriate link in the Certification column.Environmental ManagementNI is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial to the environment and to NI customers.For additional environmental information, refer to the Minimize Our Environmental Impact web page at /environment. This page contains the environmental regulations and directives with which NI complies, as well as other environmental information not included in this document.Waste Electrical and Electronic Equipment (WEEE)EU Customers At the end of the product life cycle, all NI products must bedisposed of according to local laws and regulations. For more information abouthow to recycle NI products in your region, visit /environment/weee.电子信息产品污染控制管理办法（中国RoHS）中国客户National Instruments符合中国电子信息产品中限制使用某些有害物质指令(RoHS)。

PN: ISDUALSWG Rev: D_____________________________________________________________________________________________________________________________________OWNER’S MANUALINSTALLATION, OPERATION, & PARTSDUAL SUBMERGED SUCTION OUTLET SET[Commonly called main drains]- WARNING - Read and follow all instructions in thisowner’s manual and on the equipment. Failure to follow instructions can cause severe injury and/or death.IMPORTANT SAFETY INSTRUCTIONSThis is the safety-alert symbol. When you see this symbol on your equipment or in this manual, look for one of the following signal words and be alert to the potential for personal injury.WARNING ignored presents a potential hazard.CAUTION and if ignored presents a potential hazard. It can also make consumers aware of actions that are unpredictable and unsafe.WARNING – Suction Entrapment Hazard .Suction in suction outlets and/or suction outlet covers which are damaged, broken, cracked, missing, or unsecured can cause severe injury or death due to the following entrapment hazards: Hair Entrapment - Hair becomes knotted or snagged in an outlet cover.Limb Entrapment - A limb sucked or inserted into an opening of a circulation outlet with a broken or missing cover in the pool resulting in a mechanical bind or swellingBody Suction Entrapment - Suction applied to a large portion of the body or limbs resulting in an entrapment.Evisceration/ Disembowelment Entrapment - Suction applied directly to the intestines through an unprotected sump or suction outlet with a missing or broken cover. Mechanical Entrapment - Potential for jewelry, swimsuit, hair decorations, finger, toe or knuckle to be caught in an opening of an outlet or cover.To Reduce the risk of Entrapment Hazards:o A minimum of two functioning suction outlets per pump must be installed. Suction outlets in the same plane (i.e. floor or wall), must be installed a minimum of three feet (3’) [.91 meter] apart, as measured from suction pipe center to suction pipe center. (See Diagram 1. If suction outlets are to be located closer then three feet (3’) [.91 meter] apart, they shall be located in different planes (i.e., one on the bottom, and one on the vertical wall, or one on each of two separate vertical walls.) (See Diagram 2)o Dual suction fittings shall be placed in such locations and distances to avoid “dual blockage” by a user.o Dual suction fittings shall not be located on seating areas or on the backrest for such seating areas. o The maximum system flow rate shall not exceed the flow rating of any listed (per ASME/ANSI A112.19.8M-1987, ASME A112.19.8-2007, APSP-7) suction outlet cover installed.o Keep suction outlet components clear of debris, such as leaves, dirt, hair, paper and other material. o Never use a Pool or Spa if any suction outlet component is damaged, broken, cracked, missing, or not securely attached.o Prior to each use of the swimming pool and/or spa, observe and replace damaged, broken, cracked, missing, or not securely attached suction outlet components immediately.o Remove pressure test plugs and/or plugs used in winterization of the pool/spa from the suction outlets. oTwo or more suction outlets per pump should be installed in accordance with latest APSP Standards and CPSC guidelines. Follow all National, State, and Local codes applicable.o Multiple layers of protection are available including installation of a vent pipe system, a gravity flow system, or a vacuum release system.oSuction outlet components have a finite life, the cover/grate should be inspected frequently and replaced at least every seven years or if found to be damaged, broken, cracked, missing, or not securely attached.oDo not exceed maximum flow rate stated on suction fitting.oOnly replace a pump with one with a similar flow curve, avoid a pump with a higher horsepower rating.• RECOMMENDED SYSTEM SPECIFICATIONS:WGX1048E Suction Outlet Covers are rated for Floor Only at 125 GPMWG1048EW Suction Outlet Covers are rated for Wall or Floor at 72 GPMIn the event of one suction outlet being blocked, the remaining suction outlets serving that system shall have a flow rating capable of the full flow of the pump(s) for the specific suction system.Example: In the System shown in Diagram 1, two (2) “Floor Only” suction outlet covers are selected and mounted.These covers are individually rated for 125 GPM. For a desired flow rate through the pump of 100 GPM, a minimum pipe size from the Chart 1 is selected at 3”. At the desired flow of 100 GPM one cover could be partially blocked and the other suction outlet flow would be below the rated 125 GPM of the “Floor” mounted suction outlet cover.Since there are two outlets flowing in normal operation, and the allowable velocity in the interconnecting piping is only 3ft/sec, the same pipe size is required in the interconnecting piping.Example: In the System shown in Diagram 2, one (1) “Floor Only” suction outlet cover, rated at 125 GPM, and one (1) “Wall or Floor” suction outlet cover, rated at 72 GPM are selected and mounted. For a desired flow rate through the pump of 50 GPM, a minimum pipe size from the Chart 1 is selected at 2”. At the desired flow of 50 GPM either cover could be totally blocked and the other suction outlet flow would be below the rated 72 GPM of the wall mounted suction outlet cover. Note: Flow may be limited by entrapping force in dual suction systems.Diagram 1Diagram 2 Floor Outlets,Total system ratedflow 125 GPM WallFloor72 GPM rated125 GPM RatedTotal System ratedflow 72 GPMSystemBranch pipingFIG 1InterconnectingpipingInterconnectingpipingSystem branch pipingNote: 1” Hg = 1.13 Ft of HeadINSTALLATION INSTRUCTIONS: - Use a #2 Philips head Screwdriver.NOTICE: When installing WG1030AVPAK2 refer to ASME A112.19.8-2007 for the proper instructions on how to construct the field-fabricated sump. Figure 2 is an illustration of some of the requirements.Suction outlets for a pool with a vinyl liner and for fiberglass pools are provided with a WG1048B mounting ring and two (2) gaskets. The gaskets should be placed such that they sandwich the liner or fiberglass, that is, one gasket on each side. The ring (WG1048B) is attached to the suction outlet by eight (8) screws that pass through both gaskets and the liner. See diagram below.Suction outlets for a concrete or gunite pools aredesigned to be plastered with the top surface flushto the pool surface. An Adjustable CollarWG1051X may be used to aid in obtaining thedesired configuration.Two screws MUST be used to secure the cover tothe suction outlet. USE ONLY HAYWARD GENUINEREPLACEMENT PARTS INCLUDING THE SCREWS.For installations utilizing a hydrostatic relief valve (SP1056), using a collector tube (SP1055) will maintain a clear path to the hydrostatic valve. At least one hydrostatic relief valve in a set of suction outlets will allow hydrostatic uplift pressure caused by ground water to be relieved into the pool or spa.• SPARE PARTS LISTSITEMSPARE PART DESCRIPTION QTY 1 *WGX1030Z2A SCREW SET 1.0 2 **WGX1048E COVER, SUCTION OUTLET 1.0 2 **WG1048EW COVER, SUCTION OUTLET 1.03 WGX1048B RING, SUCTIONOUTLET 1.0 4 SPX1048D GASKET 2.05 SPX1051Z1 1 1/2 IN PLASTICPIPE PLUG 1.06 SPX1053Z1 2 IN PLASTIC PIPEPLUG 1.0 7 SPX1039Z18 SCREW SET 1.0ITEM SPARE PART DESCRIPTION QTY 1 *WGX1030Z1A SCREW SET 1.02 **WGX1048E COVER, SUCTIONOUTLET 1.02 **WG1048EW COVER, SUCTIONOUTLET 1.03 SPX1051Z1 1 1/2 IN PLASTICPIPE PLUG 1.04 SPX1053Z1 2 IN PLASTIC PIPEPLUG 1.0WG1053AVPAK2 / WG1054AVPAK2 2” NPT Bottom Plug WG1051AVPAK2/ WG1052AVPAK2 1 ½” NPT Bottom PlugNOTES:NOTES:WG1048AVPAK2/ WG1049AVPAK2 1 ½” NPT Bottom PlugWG1049AVPAK2 2” NPT Side Plug **-SPARE COVER INCLUDES SCREWS FOR ALLVARIATIONS OF SUMPS, WITH OR WITHOUT METAL INSERTS.**-SPARE COVER INCLUDES SCREWS FOR ALLVARIATIONS OF SUMPS, WITH OR WITHOUT METAL INSERTS.*-SPARE SCREW SET INCLUDES SCREWS FOR SUMPS WITHOUT METAL INSERTS. IF SUMP HAS METALINSERTS INSTALLED ADD (M) TO END OF PART NUMBER.*-SPARE SCREW SET INCLUDES SCREWS FOR SUMPSWITHOUT METAL INSERTS. IF SUMP HAS METALINSERTS INSTALLED ADD (M) TO END OF PART NUMBER.SEE NOTICE ON PAGE 3 FOR FIELD FABRICATED OUTLETSITEM SPARE PART DESCRIPTION QTY 1 *WGX1030Z1A SCREW SET 1.0 2 **WGX1048E COVER, SUCTIONOUTLET 1.0 2 **WG1048EW COVER, SUCTIONOUTLET 1.0 3 WGX1153B EXTENSIONCOLLAR 1.0 4 SPX1051Z1 1 1/2 IN PLASTICPIPE PLUG1.05 SPX1053Z1 2 IN PLASTIC PIPEPLUG1.0 ITEM SPARE PART DESCRIPTION QTY 1 *WGX1030Z1A SCREW SET (8"ROUND) 1.02 **WGX1048E COVER, SUCTIONOUTLET 1.0 2 **WG1048EW COVER, SUCTIONOUTLET 1.0 3WGX1058CROUND FRAME1.0SP1153AVPAK2 / SP1154AVPAK2 2” NPT Bottom PlugNOTE:**-SPARE COVER INCLUDES SCREWS FOR ALL VARIATIONS OF SUMPS, WITH OR WITHOUT METAL INSERTS.**-SPARE COVER INCLUDES SCREWS FOR FRAME, WITH OR WITHOUT METAL INSERTS.*-SPARE SCREW SET INCLUDES SCREWS FOR SUMPS WITHOUT METAL INSERTS. IF SUMP HAS METALINSERTS INSTALLED ADD (M) TO END OF PART NUMBER.*-SPARE SCREW SET INCLUDES SCREWS FOR SUMPSWITHOUT METAL INSERTS. IF SUMP HAS METAL INSERTS INSTALLED ADD (M) TO END OF PART NUMBER.SAVE THESE INSTRUCTIONS FORFUTURE REFERENCE.▲Retain this Warranty Certificate (upper portion) in a safe and convenient location for your records.DETACH HERE: Fill out bottom portion completely and mail within 10 days of purchase/installation, OR REGISTER YOUR WARRANTYONLINE AT Dual Suction Outlet Set。

Installation Guide5-Port and 8-Port Gigabit Ethernet Unmanaged SwitchModel GS305v3 and GS308v3Package contents• Switch• Power adapter (varies by region)• Installation guideEthernet cables are not included.1. Register with the NETGEAR Insight appUse the NETGEAR Insight App to register your switch, activate your warranty, andaccess support.1. On your iOS or Android mobile device, visit the app store, search forNETGEAR Insight, and download the latest app.2. Open the NETGEAR Insight app.3. If you did not set up a NETGEAR account, tap Create NETGEAR Accountand follow the onscreen instructions.4. Tap the menu in the upper left corner to open it.5. Tap REGISTER ANY NETGEAR DEVICE.6. Enter the serial number located on the bottom of the switch, or use thecamera on your mobile device or tablet to scan the serial number bar code.7. Tap Go.8. Tap View Device to add the switch to a network.The switch is registered and added to your account. You can now view yourswitch in the NETGEAR Insight app.Note: Because this is an unmanaged switch, you cannot configure or manage itin NETGEAR Insight.2. Connect the switchIn the Sample connections diagram, the entire network is deployed indoors.If you want to connect an outdoor device to the switch, cable the switch to anEthernet surge protector that supports the same speeds as your switch, and thencable the surge protector to the outdoor device.Do not use this switch outdoors. Before connecting this switch to outdoor cablesor devices, see https:///000057103 for safety and warrantyinformation.3. Power on the switch• For switch model GS308v3 only, move the Off/On switch to the On position.• Connect the power adapter to the switch and plug it into an electrical outlet.The LEDs indicate the status.LED DescriptionPower• On. The switch is receiving power.• Off. The switch is not receiving power.Port• Solid green. The switch detected a link with a powered on device on this port.• Blinking green. The port is sending or receiving traffic.• Off. The switch does not detect a link on this port.Access PointRouterGS305v3Sample connectionsNETGEAR, Inc.350 East Plumeria DriveSan Jose, CA 95134, USA NETGEAR INTL LTDFloor 1, Building 3, University Technology Centre Curraheen Road, Cork,T12EF21, Ireland© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.Support and CommunityVisit /support to get your questions answered and access the latest downloads.You can also check out our NETGEAR Community for helpful advice at .Regulatory and LegalSi ce produit est vendu au Canada, vous pouvez accéder à ce document enfrançais canadien à https:///support/download/.(If this product is sold in Canada, you can access this document in Canadian French at https:///support/download/.)For regulatory compliance information including the EU Declaration of Conformity, visit https:///about/regulatory/.See the regulatory compliance document before connecting the power supply. For NETGEAR’s Privacy Policy, visit https:///about/privacy-policy. By using this device, you are agreeing to NETGEAR’s Terms and Conditions at https:///about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.April 2020。

宝贝描述（Product description）产品参数：尺寸：7英寸16:10比例，超薄薄至9.5mm屏幕：1280*800分辨率,IPS五点电容屏CPU：MTK8389 A9四核，1.2GHZ主频GPU：采用双核PowerVR SGX531内存：1G DDR3FLASH：8GB 储存容量操作系统：安卓4.1操作系统，支持人脸识别功能双摄像头：前置130万像素,后置200万像素(500万可选)3G：支持3G通话及3G上网，默认4+1,支持4+2，4+3GPS：支持GPS/AGPS/YGPA蓝牙：4.0支持FM/ATV功能电池：3000mah锂电池，可续航4-6小时电流电压：5V/2A，usb 、（HIDM可选）接口Product parameter:Size: 7 inch 16:10 ratio, Ultra thin 9.5 mmScreen: 1280*800 resolution, IPSfive capacitance screenCPU: MTK8377 A9 Four nuclear , 1.2G HZ frequencyGPU: A dual-core PowerVR SGX531Memory: 1G DDR3FLASH:8GB storage capacityOperating system: Android 4.1 operating system, support for face recognition functionDual cameras: front 1.3mp pixels,The rear 2.0mp pixels (5 million optional) 3G: Phone support 3 g and 3 g Internet access, the default 4 + 1, 4 + 2, 4 + 3 GPS: Support GPS/AGPS/YGPABluetooth:4.0Support FM/ATV functionBattery: lithium battery 3000mAh, lasts up to 5-7 hoursCurrent and voltage: 5V/2A, USB 、（HIDM optional）interface外形介绍：按键：电源键、音量键、HOME键接口：usb、耳机孔、TF卡槽、GSM卡槽、WCMDA卡槽等等七大接口。

P E R F O R M • Available in 2-drive, 4-drive and 6-drive desktop models or 4-drive rackmount • High performance Intel® Atom™ Dual-Core Processors• Windows® Storage Server 2012 Workgroup Edition• Easy backup software NovaBACKUP® included• Three-year warranty • Reliable NAS hard drivesTeraStation TM5000N WSS SeriesWS5200DN, WS5400DN, WS5400RN, WS5600DNHigh Performance, Reliable Windows Storage for Small and Medium BusinessKey Featureswww.Buff 24/7 TECH SUPPORT | 3-YEAR WARRANTY (866) 752-6210 | USA & Canada OnlyP E R F O R M A N C E M A T T E R SMODELSSHIPPINGDimensions (LxWxH) WeightACCESSORIESCompatible Hard Drives BOX CONTENTSWS5200DN©2014 BUFFALO INC. All rights reserved. BUFFALO and BUFFALO logo are either trademarks or registered trademarks of MELCO HOLDINGS INC. The names and logos of other companies mentioned herein belong to their respective owners. www.BuffTeraStation TM , Utility CD (TeraNavigator, NASNavigator2, NovaBACKUP®, Adobe® Reader®), 3pin - 2pin Adapter, Quick Setup Guide, USB Flash for WSS, Ethernet Cable, Rail Kit with Mounting Brackets and Screws*, AC Cable, Front Panel Key, Warranty Statement * WS5400RN onlyDesktop Models: OP-HD1.0WR, OP-HD2.0WR, OP-HD3.0WR, OP-HD4.0WR, OP-HD6.0WR Rackmount: OP-HD1.0S-3Y, OP-HD2.0S-3Y, OP-HD3.0S-3Y, OP-HD4.0S-3YINCLUDED SOFTWAREWindows® Storage Server 2012 Standard Edition, TeraNavigator, NASNavigator2, NovaBACKUP® Buffalo Edition (one server and ten workstation licenses), Adobe® Reader®LAN INTERFACECLIENT OS SUPPORTWindows® 10, Windows® 8.1 (32-bit/64-bit), Windows® 8 (32-bit/64-bit), Windows® 7 (32-bit/64-bit), Windows Vista® (32-bit/64-bit), Windows® XP, Windows Server® 2012, Windows Server® 2012R2, Windows Server® 2008, Windows Server® 2008R2, Windows Server® 2003, Windows Server® 2003R2, Mac® OS® X 10.5 or later(10BASE-T)IEEE802.3, (100BASE-TX)IEEE802.3u, (1000BASE-T)IEEE802.3ab 210 / 100 / 1000 Mbps TCP/IPCIFS/SMB, AFP, HTTP/HTTPS, FTP/SFTP, NFS RJ-45Standards Compliance Number of Ports Data Transfer Rates Supported Protocols Network File Services Connector Type Part Numbers Configuration INTERNAL HARD DRIVES Number of Drives Capacity Range Drive Interface Supported RAIDUSB INTERFACEStandards Compliance Connector Type Number of Ports Data Transfer RatesPERFORMANCE CPU MemoryENVIRONMENTAL & POWER Power Consumption Power Supply Operating Temperature Operating Humidity WS5200DN0402W2 WS5200DN0802W2 Desktop24, 8 TBSATA 3 Gbps 0/1/JBOD (Individual Disks)USB 3.0, USB 2.0A type2x USB 3.0, 2x USB 2.05 Gbps (USB 3.0) 480 Mbps (USB 2.0)Intel® Atom™ Processor D2550 (1.86 GHz Dual-Core)4 GB DDR3Max 65WInternal AC 100-240V Universal 50/60Hz 41˚ - 95˚F (0˚ - 35˚C)20 - 80% non-condensing 9.06 x 6.69 x 6.69 in 9.92 lbs TeraStation TM5000N WSS SeriesWS5200DN, WS5400DN, WS5400RN, WS5600DNP E R F O R M A N C E M A T T E R SWS5400DNWS5400RNWS5600DNWS5400DN0404W2WS5400DN0804W2WS5400DN1204W2DesktopUSB 3.0, USB 2.0A type2x USB 3.0, 2x USB 2.0 5 Gbps (USB 3.0) 480 Mbps (USB 2.0)USB 3.0, USB 2.0A type3x USB 3.0, 2x USB 2.0 5 Gbps (USB 3.0) 480 Mbps (USB 2.0)USB 3.0, USB 2.0A type3x USB 3.0, 2x USB 2.0 5 Gbps (USB 3.0) 480 Mbps (USB 2.0)44, 8, 12 TB SATA 3 Gbps 0/1/5/JBOD (Individual Disks)Max 96WInternal AC 100-240V Universal 50/60Hz 41˚ - 95˚F (0˚ - 35˚C)20 - 80% non-condensing9.06 x 6.69 x 8.46in 17.64 lbsMax 96WInternal AC 100-240V Universal 50/60Hz 41˚ - 95˚F (0˚ - 35˚C)20 - 80% non-condensing 16.41x 18.92 x 1.74 in 19.84 lbs Max 120WInternal AC 100-240V Universal 50/60Hz 41˚ - 95˚F (0˚ - 35˚C)20 - 80% non-condensing10.24 x 6.69 x 9.06 in 22.05 lbs48, 16 TBSATA 3 Gbps 0/1/5/JBOD (Individual Disks)612, 24 TB SATA 3 Gbps 0/1/5/JBOD (Individual Disks)WS5400RN0804S2WS5400RN1604S2RackmountWS5600DN1206S2 WS5600DN2406S2DesktopIntel® Atom™ Processor D2550 (1.86 GHz Dual-Core)4 GB DDR3Intel® Atom™ Processor D2701 (2.13 GHz Dual-Core)4 GB DDR3Intel® Atom™ Processor D2700 (2.13 GHz Dual-Core)4 GB DDR3。

148.5mm｀｀性LH叟罕斗从哲Guide and Caution咽召包否已从罕叫从苞Power supply precautions1. 对吾斗包世芭人冷音针苛QC2.0王七QC3.0 1. Forsmooth usage, we recommend us,ng a大围号人回到人南音过召甘任S\a!L回.QC2.0andQC3.0CigarJack早包含翌书电色Lff从哲1. 早洲3mm,却HSmmOl41斗兄空列OI<,人恬纣音书召苟卫，望早升101尘刊叫叫早召老衬01对陀屯令双合LICI.4. 大尼µ扑早芒丘才菩O冷l召早对吾OflOI甘01世创昔今毁合L回工召罕芒O忙H21召早斗旮舍LI卧-30"COI怂：吾召立迳召土60"C召辛．早包合召否甘-BO"C召辛:2-:::t酉钳吾封否XI Wirelesscharging guidelines1. For phones with case�cases with a thickness of 3mm to 5mm is recommended. For some cases the wireless charging function may be limited.2.3巴皆丕磕音世号古回，生叶呈芒音丘马世皆叫 2. Use the three-way adjustments of the 0-Grab Bal. 否君�I臾引罕�I立(±DI呈芒玉世叫早性合召71Place the smartphone in the center of the 0-Grab弓世斗早因詈斐卒召夸衬空爸呈封啡20%告世Bal cradle. (The right positioning of the phone can 牛双合L(卧.)increasethe chargingefficiencyby20%)3. 早召老衬D仄l钳么引巨芒叫召早2主召召卫吕 3. For smartphones thatdo not support wireless王芒世号习01甘01皆创世牛双芒啡，马召罕芒charging, please note that a 2 seconds wamingtone 啦胆l召早斗召舍L忙I.may occur orthatthe product may have functional 早牡杏袒音01,1钳苟la±DI巨芒abnormality. A bnormal functionality may occur in 叫目纽红南皂±DI巨芒the following cases:叫肖全对包砬匡芒升10伈Smartphones that do not support wireless charging-Smartphones made out of m etal-Smartphone cases made out of m etal4. Please note that in case of high temperatures inthe vehicle, the heat may cause the product tomalfunction. T ake caution in thefollowingcases:-Temperature above 30'C: decrease ofchargingPercentage-Temperature approx. 60-C: interruption ofwireless charging-Temperature approx. B O"C: 0-Grab Bal stopsoperating 0-Grab区Fast Wireless Charger对吾人f号昝丐人1包LI卧．This is your productuser manual..2.::J. 翌皆早邑老召平问召卦君皂l0-Grab Bal wireless charging mounting manual可呈丕召雀丘沮01叶呈罕包老召才大回詈从号对AIIH.The wireless charging mount can be used right away without anyadditional assembly., �r,; 庄三n':,,i,,_玉1. 大t碧舍吾干�I2.:! 翌世号刀悍l塌合LICf.l. Insert/place the 0-Grab Bal holding clip in the air vent of the vehicle.2. 舍吾子才丸cH斗丕告早号昼司舍吾干�I巳甘针对卫召甘LIC十2. Rotate the fastener on the clip to secure the grip in the air vent.3. 升101量昼癸2巴豆工凿岂番从邑苞苍上1l7f咎豆呈ILICf.3. Plug in the cable and the 0-Grab Bal is ready to use纽1亘芒才大1号岂How to mount the smartphone 卢』。

V.2.4.1执行的TOC分析该LSI在插入的存储器中分析文件夹/文件的总数。

发送SEL_TOC命令。

如果您不需要TOC 分析，你可以忽略它。

图V.2.6显示了TOC分析的操作流程。

当发送SEL_TOC命令，在LSI在选定的存储器中分析得到文件夹和文件的总数量。

在搜索完成后，结果输出到STATUS1 ：SEARCH寄存器。

因此，在SEL_TOC命令发出后，LSI开始读取文件夹和文件的总数，确认阅读状态：SEARCH寄存器和确认分析已经完成。

当TOC分析完成时，在选定的内存卡（usb或sd卡）读出的分析结果（文件和文件夹总数）。

当SEL_TOC状态为ON时，LSI总是开始获取文件夹的总数量，并首先响应插入的内存卡和有CHNG_DEV命令时。

即使在播放过程中，如果SEL_TOC从OFF转换到ON时，LSI中断播放，并开始获得的文件夹/文件的总数。

V.2.4.2设置音量LSI可以使用SEL_VOL终端端口的上拉来使能（可以更改音量），设置音量初始值。

该LSI 允许您可以从0x00为0x31设置32级音量。

将音量设置在SET_VOL命令的第二个字节。

V2.4.3设置音频输出当SEL_DOUT终端端口下拉，则为数字音频输出，您可以使用SET_DOUT命令选择数字音频输出格式（I2S输出/ SPDIF输出）。

当数字音频输出被选择时，在初始设定是I2S 32FS 格式输出。

当线路输出被选中的SEL_DOUT终端端口，您可以使用SET_EQ命令在线路输出进行均衡器效果。

这将在数字音频输出格式被禁用。

V.2.4.4设置的ID3Tag阅读此设置选择是否执行ID3Tag分析。

默认情况下，不执行的ID3Tag分析。

V.2.4.5设为12 MHz时钟输出如果从CLK12MOUT终端端口12 MHz时钟输出是需要的。

应该设置这个参数，默认情况下，不进行12 MHz时钟输出。

V.2.5等待/接收操作命令在存储器设备识别完成和初始设定完成后，在LSI处于等待操作的命令状态。

BU9793FS20SEG*4COM LCD Segment DriverRev.0.722. Dec, 2006目录1. 命令/数据传送方法 (6)1.1 Acknowledge信号 (6)1.2 命令的传送方法 (7)1.3 显示数据的写入和传送方法 (7)本LSI内置了容量为20×4=80bit的显示数据RAM (DDRAM)。

(7)2. OSCILLATOR (7)3. LCD Driver Bias Circuit (8)4. Blinker timing generator (13)5. 初始化顺序 (13)6. Reset初始状态 (13)7. 外围部品 (14)7.1使用CONTRAST调整功能时 (14)7.2不使用CONTRAST功能时 (14)8. 命令的详细说明 (16)○ Mode Set (MODE SET) (16)○ Address set (ADSET) (16)○ Display control (DISCTL) (17)○ Set IC Operarion(ICSET) (18)○ Blink control (BLKCTL) (19)○ All pixel control (APCTL) (19)9. 显示数据例子 (20)10. 开始顺序例程 (21)修改履历 (29)◎ 没有耐放射线设计。

● 本资料所记载的内容可能涉及到外汇及外国贸易管理法(设计，制造，使用的技术）的某些方面在处理时请注意。

● 本品是为了特定的机器，装置而设计的专用品，请使用者自己判断本品是否符合外汇法的条款。

造构造 单片硅集成电路 名品名 BU9793FS 图外形尺寸图 参照图4能性能 字段式液晶显示用驱动芯片点特点○ 液晶显示输出： 4线Common 输出20线Segment 输出○ 内置显示数据RAM (DDRAM)内置RAM 的容量： 20*4 =80 bit ○ 2线串行接口 (SCL, SDA) ○ 内置振荡电路○ 内置液晶驱动用电源电路1/2 ,1/3 Bias 1/4 Duty Buffer AMP 内置 ○ 不需要外部部品 ○ 低功耗设计 ○ 搭载等待模式○ 内置Power-on Reset 电路 ○ 搭载闪烁功能○ 工作电源电压： 2.5～5.5V使用上需要注意的地方在应用推荐的经过试验的应用电路的例子时，请更好的确认他的特性。

bbWI bbWI--FI 流動寬頻流動寬頻服務服務服務用戶指南用戶指南用戶指南目錄第一部分 自動登入功能第二部分詳細系統設定1. Windows XP 用戶初步系統設定 1.1.1 設定無線網絡配接卡 1.1.2 關閉Proxy 伺服器 1.1.3 關閉快顯封鎖程式連接bbWI-FI 無線上網服務1.2.1 揀選無線網絡 (SSID) 1.2.2 登入程序 1.2.3 成功登入狀況2. 其他WI-FI 裝置用戶 (手機/PDA 等) 簡便連線步驟第一部份第一部份 自動登入功能自動登入功能什麼是『自動登入』？一般WI-FI 登入過程中，用戶需要進入服務登入版面，並輸入用戶名稱及密碼登入，成功登入後方可連接至互聯網。

而透過『自動登入』功能，bbWI-FI 用家可於熱點直接透過網路名稱(SSID) 為『HKBN_bbWIFI』的網路連接互聯網，省去於登入版面輸入用戶名稱及密碼的步驟，極之方便！要享用bbWI-FI 『自動登入』功能步驟非常簡單， 閣下只需於香港寬頻bbWI-FI 網頁內儲存您所使用之WI-FI 裝置的MAC Address 記錄或直接利用 閣下的WI-FI 裝置於熱點登入bbWI-FI 服務， bbWI-FI 系統便會儲存 閣下現正使用的WI-FI 裝置之MAC Address 記錄，哪麼下一次以此裝置於熱點連接 『HKBN_bbWIFI』時，bbWI-FI 系統便會啟動『自動登入』功能，直接連接互聯網。

註：bbWI-FI『自動登入』系統只會記錄每位用戶一個WI-FI 裝置的Mac Address ，如果用戶選擇將系統之MAC Address 記錄更新，則舊有MAC Address 記錄會被刪除。

「自動登入自動登入」」WI WI--FI 裝置裝置設定設定設定1) 於香港寬頻bbWI-FI 網頁作『自動登入』WI-FI 裝置設定您可於bbWI-FI 網站『更改裝置記錄』欄目中，以bbWI-FI 用戶名稱及密碼登入，登入後填上您所使用之WI-FI 裝置的MAC Address，按『確定更新』即可。

Gigabit Rackmount Switch with 8-port 10/100 Switch350 E. Plumeria DriveSan Jose, CA 95134-1911 USA 1-888-NETGEAR (638-4327)E-mail: info@ ©2008 NETGEAR, Inc., the NETGEAR logo, Connect with Innovation, Everybody’s connecting, FrontView, the Gear Guy logo, IntelliFi, ProSafe, ReadyNAS, RAIDar, RAIDiator, RangeMax, X-RAID, and Smart Wizard are trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Microsoft and Windows are trademarks of Microsoft Corporation in the United States and/or other countries. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved.*Free basic installation support provided for 90 days from date of purchase. Advanced product features and configurations are not included in free basic installation support; optional premium support available.†Lifetime warranty for product purchased after 05/01/2007. For product purchased before 05/01/2007, warranty is 2 years.D-JGS524F-1ProSafe® 24-port Gigabit Rackmount Switch with 2 SFP Slots JGS524FTechnical Specifications Performance•Switching bandwidth: 48 Gbps–Forward rate (1000 Mbps port):–1,480,000 packest per secForward rate (100 Mbps port): 148,000 –packets per secForward rate (10 Mbps port): 14,800–packets per secLatency (1000 to 1000 Mbps): 20 µs–maxPacket buffer memory: 2 Mb–MAC address database: 8,000–Mean time between failures (MTBF):–230,000 hours (~ 26 years)Network Ports•24 10/100/1000 Mbps twisted-pair–RJ-45 ports2 SFP slots for mini GBIC modules–Power Consumption•100~240V; 50-60 Hz; plug is localized –to country of sale40W max–Standards Compliance•IEEE 802.3i 10BASE-T Ethernet–IEEE 802.3u 100BASE-TX Fast Ethernet –IEEE 802.3ab 1000BASE-T Gigabit–EthernetIEEE 802.3z 1000BASE-X Gigabit–EthernetIEEE 802.3X Flow Control–Status LEDs•Unit: power–Per network port: Link, activity, speed–Physical Specifications•Dimensions (h x w x d):–43 x 330 x 169 mm (1.7 x 13 x 6.6 in)Weight: 1.7 kg (3.8 lb)–Environmental Specifications•Operating temperature:–0° to 50°C (32° to 122°F)Operating humidity: 90% maximum–relative humidity, noncondensingStorage temperature:–-20° to 70°C (-4° to 158º F)Storage humidity: 10% to 95% Relative–HumidityElectromagnetic Compliance•CE mark, commercial–FCC Part 15 Class A–VCCI Class A–EN 55022 (CISPR 22), Class A,–EN 50082-1,EN 55024–C-Tick–Safety Agency Approvals•UL listed (UL 1950)/cUL–IEC 950/EN 60950–WarrantyNETGEAR Lifetime Warranty–†System RequirementsUTP Category 5 cables or better–Network card for each PC or server–(e.g. NETGEAR GA311)Package ContentsGigabit Ethernet Switch (JGS524F)–Power adapter–Installation guide–Rack-mount kit–Warranty/support information card–ModulesNETGEAR ProSafe AGM731F–1000BASE-SX SFP GBIC moduleNETGEAR ProSafe AGM732F–1000BASE-LX SFP GBIC moduleNETGEAR ProSafe AGM733–1000BASE-ZX SFP GBIC moduleProSupport Service PacksAvailableOnCall 24x7, Category 1•PMB0331-100 (US)–PMB0331 (non-US)–XPressHW, Category 1•PRR0331–Ordering InformationNorth America: JGS524FNA–Asia: JGS524FAU–Japan: JGS524FJP–Europe: JGS524F-100EUS–。

EW-7822UAnN300長距離高速USB無線網路卡產品資訊感謝您購買EDIMAX EW-7822UAn無線網路卡。

EW-7822UAn支援802.11b/g/n無線網路傳輸技術，可以提供高效能、低干擾的無線傳輸，適用於一般家庭和中小企業辦公室的無線網路環境，透過EDIMAX工具程式，即能快速的設定並且連線至您的無線網路環境。

1-1系統需求適用含以下作業系統的個人電腦或筆記型電腦：Windows XP, Vista, Win7, Win8.1, Win10及macOS。

同時，電腦必須內建USB插槽(TYPE A)供EW-7822UAn無線網路卡來使用。

1-2安全資訊•產品適用於室內與戶外，但在戶外使用，請給予適當的保護措施。

•請勿將產品放置在濕熱或高溫的環境使用。

•本產品內含精密零件，如不慎，可能會造成嬰孩童有誤食的危險，請務必將本產品放置於嬰孩童無法輕易取得的地方使用。

•產品因屬於無線網路設備，嚴禁使用在被規範的場所，如醫院、飛機、機場等場所。

•產品嚴禁擅自拆卸，否則原廠保固將失效。

如果您發現產品無法正常運作，請聯繫您的經銷商並尋求其協助。

•如果本產品掉落水中，請不要立即使用在電腦上，請求助於有經驗的電子技術人員。

包裝內容EW-7822UAn無線網路卡⏹安裝指南⏹USB延長線LED指示燈號說明硬體安裝啟動電腦，並請將USB無線網路卡插入電腦的USB埠。

請注意：電腦USB接埠有方向性，需依其方向正確插入網卡！部分桌上型電腦的USB接埠方向會讓插入後的網卡天線朝下，在這種情況下，建議您搭配使用包裝內附的USB延長底座。

插/拔網卡時，也請如上圖示意，抓住本體後再適當插/拔，如不當施力會很容易造成人為損害，影響保固權益。

安裝驅動程式請至我們官網下載最新的driverhttps:///edimax/download/download/data/edimax/tw/do wnload/wireless_adapters_n300/ew-7822uan底下我們介紹的是較為廣泛的Windows 作業系統。

Product:7503AMachFlex™, Vision Coax 75Ω, #20 Str BC, PO Ins, OA TC Brd, PVC Jkt, AWM1354Product DescriptionMachFlex™ for High Flex, 1 Conductor 20AWG (105(7x15)x40) Bare Copper, PO Insulation, Overall Tinned Copper Braid(95%) Shield, PVC Outer Jacket, AWM 1354Technical SpecificationsPhysical Characteristics (Overall)ConductorInsulationOuter ShieldOuter JacketElectrical CharacteristicsConductor DCRCapacitanceInductanceImpedanceHigh Frequency (Nominal/Typical)10 MHz0.6 dB/100ft30 MHz 1.1 dB/100ft50 MHz 1.5 dB/100ft100 MHz 2.2 dB/100ftDelayNominal Delay Nominal Velocity of Propagation (VP) [%]1.3 ns/ft80%High FrequencyFrequency [MHz]2.2 MHz5 MHz10 MHz30 MHz50 MHz100 MHzVoltageUL Voltage Rating30 V RMSTemperature RangeNon-UL Temp Rating:80°COperating Temp Range:-40°C To +80°CMechanical CharacteristicsBulk Cable Weight:34 lbs/1000ftMax. Pull Tension:35 lbsMin. Bend Radius (Continuous Flexing): 5.5 inMin. Bend Radius/Minor Axis: 2.75 inStandardsUL AWM Style Compliance:AWM 1354CSA AWM Compliance:AWM I/II A/BApplicable Environmental and Other ProgramsEU Directive 2000/53/EC (ELV):YesEU Directive 2003/11/EC (BFR):YesEU Directive 2011/65/EU (RoHS 2):YesEU Directive 2012/19/EU (WEEE):YesEU Directive 2015/863/EU (RoHS 2Yesamendment):EU Directive Compliance:EU Directive 2003/11/EC (BFR)EU CE Mark:YesMII Order #39 (China RoHS):YesFlammability, LS0H, Toxicity TestingC(UL) Flammability:FT1UL voltage rating:30 V RMSPlenum/Non-PlenumPlenum (Y/N):NoRelated Part NumbersVariantsItem #Color Put-Up Type Length UPC7503A G7X500Blue, Matte Reel500 ft6128251873257503A G7X1000Blue, Matte Reel1,000 ft612825187301Footnote: C - CRATE REEL PUT-UP., Z - FINAL PUT-UP MAY VARY (= OR -) 10% FOR SPOOLS OR REELS AND (+ OR -) 5% FOR UNREEL CARTONS FROM LENGTH SHOWN.HistoryUpdate and Revision:Revision Number: 0.384 Revision Date: 12-15-2021© 2022 Belden, IncAll Rights Reserved.Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described here in are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability.Belden provides the information and specifications herein on an "ASIS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.All sales of Belden products are subject to Belden's standard terms and conditions of sale.Belden believes this product to be in compliance with all applicable environmental programs as listed in the data sheet. The information provided is correct to the best of Belden's knowledge, information and belief at the date of its publication. This information is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. The Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product.。