Drop test high: 100cm
Drop test sequence:
One corner:
Drop 1: Bottom corner.
Three edges:
Drop 2: Front edge;
Drop 3: Right edge;
Drop 4: Bottom edge.
Six face:
Drop 5: Front;
Drop 6: Rear;
Drop 7: Right;
Drop 8: Left;
Drop 9: Top;
Drop 10: Bottom.
Drop test Drawing:
Testing result:
●If any damage or malfunction is found on the product, the result for drop test will be failed.
●If any slight crush is found on the master carton, it will not be counted as defect. The result is passed.
●If the master carton has serious crush or open seam or
crush is found on the inner salable carton, make a remark on the report and give a failed result.
●If a product comes out from the carton during carton drop test, the result should be failed.
