LB-302FP中文资料

丹佛斯（Danfoss）FC-302变频器特点硬件部分：1、图形控制面板LCP102（1）多种语言，包括简体中文和繁体中文（2）能显示：功率、频率、电压、电流、转速、转向、转矩、模块温度等（3）具有简单的示波器功能，能显示变频器运行状态曲线图（4）可带电热插拔：方便调试和快速参数复制2、输入回路设计有铁氧体高频扼流圈：（1）减少电网过来的高频干扰信号对变频器的影响；（2）减少变频器产生的高频干扰信号对电网的影响。

3、内置双直流电抗器：安装在变频器整流电路后，它的作用是（1）限制叠加在直流电流上的交流纹波；（2）改善变频器的功率因数并可以抑制变频器逆变环节产生的谐波；（3）保护整流模块和电容；（4）减少对电网的影响；（5）防止用电设备的电感和电网功率因数修正装置的电容之间发生共振；4、电磁兼容性(EMC):指抗电气干扰和不向周围发出干扰的能力内置无线电干扰滤波器（标准内置A/B1极滤波器）符合国际IEC61000和EN61800标准。

5、电容耐压高：电容耐压为900V，比其他品牌变频器高100V左右6、智能散热功能-----延长变频器使用寿命冷却风和电子器件之间完全隔离，风扇运行由智能监测电路根据内部温度决定，延长风扇寿命。

7、最长可达150 m 屏蔽电机电缆和300m的非屏蔽连接电缆：其他品牌的变频器是50m(屏蔽缆)和100m（非屏蔽缆）多项保护措施：内置有保护器件（尖峰脉冲波吸收装置、阻容吸收装置及铁氧体变阻器），解决了瞬间高压／浪涌电压的问题；保护功能齐全：具有100％输出相间短路保护，具有100％的接地故障保护，具有输入侧瞬间失电、输出缺相、高压隔离和其它通用保护(过电压/欠电压、变频器过载/电机过载、短路、过流)等功能。

电子式电动机过载热保护及热敏电阻输入保护，变频器功率模块温度实时监测及智能过热保护。

9、安全控制功能VLT AutomationDrive FC302符合适用EN954-1标准规定的三类装置的安全停车功能。

常用集成电路速查表AN115?锁相环调频立体声解码电路1AN260?FM中频放大及AM高、中频放大电路2AN262?音频前置放大电路3AN278?FM中频放大电路4AN360?低噪声音频前置放大电路5AN362/AN362L?锁相环调频立体声解码电路6AN366/AN366P?FM/AM中频及AM高频放大电路8AN426510AN5265?音频功率放大电路10AN5270?音频功率放大电路11AN5274?音频功率放大电路12AN5743?音频前置及功率放大电路13AN5836〖KG1]双声道音频前置放大电路14AN6210?录/放音双声道音频前置放大电路15AN6612S?电机稳速控制电路16AN6650?微型电机速度控制电路17AN6875?LED电平显示驱动电路18AN6884?LED电平显示驱动电路19AN7060?音频前置放大电路20AN7085N5?单片录/放音电路21AN7105?双声道音频前置及03W×2功率放大电路22 AN7106K?双声道音频功率放大电路23AN7108?单片立体声放音电路24AN7110?12W音频功率放大电路26AN7120?音频功率放大电路27AN7147N〖KG1]58W×2音频功率放大电路28AN7161N?20W音频功率放大电路29AN7168?双声道音频功率放大电路30AN7169〖KG1]58W音频功率放大电路31AN7178?双声道音频功率放大电路32AN7222?FM/AM中频放大电路33AN7273?FM/AM中频放大电路34AN7310?双声道音频前置放大电路35AN7311?双声道音频前置放大电路36AN7312?具有ALC的双声道音频前置放大电路37AN7338K?CD唱机声音效果处理电路38AN7420?锁相环调频立体声解码电路39AN8802CE1V?CD唱机电机伺服驱动电路41AN89C2051～24PC?微处理器42BA328?双声道音频前置放大电路43BA335?自动选曲电路44BA532?58W音频功率放大电路45BA536?48W×2音频功率放大电路46BA656?LED电平显示驱动电路47BA1102F?杜比B型降噪处理电路48BA1106F?杜比B型降噪处理电路49BA1332/BA1332L?锁相环调频立体声解码电路50BA1356?锁相环调频立体声解码电路52BA1362F?锁相环调频立体声解码电路53BA3283?放音电路54BA3304F?双声道音频前置放大电路54BA3312N?具有ALC的双声道音频前置放大电路55BA3314?MIC音频前置放大电路56BA3404F?低电压自动返转双声道音频前置放大电路57BA3416BL?双声道音频前置放大电路58BA3503F?单片立体声放音电路59BA3506?单片放音电路60BA3515AFS?单片放音电路61BA3516F?单片放音电路62BA3818F?电压比较器63BA3822LS?双五段图示均衡放大电路64BA3828?电子选台预置电路65BA3880S?BBE音频信号处理电路66BA4402?FM高频放大及变频电路67BA4560/BA4560N?双运算放大器67BA5096?数字延时混响电路68BA5208AF?双声道功率放大电路70BA5402A?42W×2音频功率放大电路70BA5406?45W×2音频功率放大电路71BA6209/BA6209N/BA6209U/BA6209V?电机正/反转驱动电路72BA6227?电机稳速电路74BA6296FP?CD唱机主轴和进给电机、聚焦和循迹线圈伺服驱动电路75 BA6301?电机速度伺服控制电路76BA6395FP?CD唱机电机伺服驱动电路77BA7725S?音频信号压缩/扩展处理电路80BA7743FS?Hi－Hi音频磁头信号放大电路81BA7751ALS?音频信号处理电路82BA7766SA?音频信号处理电路83BA7797F?音频信号处理电路85BA15218/BA15218N?双运算放大器86BH7770KS?Hi－Hi音频信号处理电路87BL3102?时钟信号发生器92BL3207?电荷耦合延时电路93BU9252F?MIC音频信号延时电路94BU9253FS?音频信号混响延迟电路95CD3161CS?双声道前置放大电路95CD7640CP?FM/AM中频放大电路96CD7738?单片录/放音电路97CD9608CS?双声道音频前置放大电路98CN9832/CS8831?语音录/放音电路99CW9300?音乐电路102CX20023?单片录/放音电路103CX20029?AM/FM立体声收音调谐器104CX20107?单片录/放音电路105CX20111?FM/AM收音机电路106CXA1005P?双声道音频功率放大电路107CXA1019/CXA1019M/CXA1019P?单片FM/AM收音机电路108 CXA1033P?单片AM收音机电路113CXA1034/CXA1034P?单片立体声放音电路114CXA1081M?CD唱机射频放大及伺服电压产生电路116 CXA1179AS?耳机声音选择控制电路118CXA1191M/CXA1191P?单片FM/AM收音机电路120CXA1238M/CXA1238P?FM/AM立体声收音机电路122CXA1244S?CD唱机电机伺服驱动电路124CXA1262N?单片录/放音电路125CXA1278N?单片放音电路127CXA1279AS?音频信号处理电路128CXA1279BS?音频信号处理电路129CXA1622?立体声功率放大电路130CXA1642P?背景歌声信号消除电路131CXA1644P?回声效果发生器132CXA1649M?音调处理电路133CXA1735S?环绕声信号处理电路134CXA1782BQ?CD唱机主轴和进给电机、聚焦和寻迹线圈伺服驱动电路136CXA1821M?CD唱机射频信号放大电路139CXA8008P?单片放音电路140CXD1135QZ?CD唱机数字信号处理电路141CXD1167Q?CD唱机数字信号处理电路144CXD1186C－Q?CD－ROM译码电路147CXD2500AQ?CD唱机数字信号处理电路150CXD2518Q?CD唱机EEM解调、RAM控制、纠错CLV伺服驱动电路152CXP1031Q?CD唱机系统控制电路154D6121G001?CD唱机功能键矩阵编码电路155D6121G002?CD唱机功能键矩阵编码电路155D6375A?数码录音电话数字信号处理电路156D7335P?FM高频放大及变频电路159D7640AP?FM/AM中频放大电路160D7658P?具有ALC控制的双声道前置均衡放大电路161D7666P?双路五点LED电平指示电路162D7668AP?具有ALC控制的双声道前置放大电路163D7796P?五段音调控制电路164DF1700?CD唱机数字滤波器165DG4100?1W音频功率放大电路167DM74LS164M?8位移位寄存器168ES3207F?视频和音频D/A转换、制式转换、卡拉OK电路169ES56028E?数字回声混响电路170ES65033?数字混响延时电路171GM71C4263CJ60?DROM存储器172GY9403?单片数字卡拉OK电路173H8/3714?中央处理器174HA1137W?FM中放、鉴频、AGC及AFC电路175HA1196?锁相环调频立体声解码电路176HA1371?73W音频功率放大电路177HA1377?7W×2音频功率放大电路178HA1392?68W×2音频功率放大电路179HA1394?82W×2音频功率放大电路180HA1406?音频前置放大电路181HA11211?FM/AM中放及音频功率放大电路182HA11251?FM/AM中放、鉴频及音频放大电路183HA12002?扬声器保护电路184HA12016?立体声解码电路185HA12045/HA12045MP/HA12046/HA12046MP/HA12047/HA12047MP?杜比B型降噪处理电路186HA12102?双声道音频前置放大电路188HA12413/HA12413A?FM/AM中频放大电路189HA13001?双声道音频功率放大电路191HA17324?高性能四运算放大器192HC138?电子控制电路193HT8955A?回声效果产生电路194HT－G311?音乐电路(电子念佛)195HY403?音乐电路195IAP722?FM高放、混频电路196IR3N06?窄带FM中频放大电路197IR3R20A?程序选曲电路198JRC6308B?MIC信号放大电路199KA2107?直流音量/音调控制电路200KA2206B?音频功率放大电路201KA2209?低电压双声道音频功率放大电路201KA2213?单片磁带录音机电路202KA2261?锁相环调频立体声解码电路203KA2263?锁相环调频立体声解码电路205KA2284?LED电平显示驱动电路206KA2292?单片FM/AM立体声收音机电路207KA2402?低电压直流电机速度控制电路208KA4558?双运算放大器208KA7226?具有ALC的双声道均衡放大电路209KA8309B?CD唱机伺服信号(SSP)处理电路210KA9201?CD唱机射频放大/伺服电压产生电路212 KA9201Q?CD唱机射频放大/伺服电压产生电路213 KA22134?具有ALC的双前置功率放大电路215KA22136?单片放音电路216KA22234?双声道五段图示均衡电路217KA22241B?具有ALC的双声道均衡放大电路219KA22242?具有ALC的双声道前置/均衡放大电路220 KA22261?双声道前置放大电路221KA22427?FM/AM收音机电路222KA22471?FM/AM中频放大电路223KD01/KD01C?驱动闪光电路224KD07?闪烁、音乐电路225KD12D?译码、报警电路226KD15?音乐电路(十五的月亮)227KD48?音乐电路(12首名曲打点报时、光控)227KD151?音乐电路(天仙配)228KD152G?音乐电路(济公活佛)229KD152H?音乐电路(洪湖水，浪打浪)229KD152L?音乐电路(兰花草)230KD152M?音乐电路(世上只有妈妈好)231KD153?音乐电路(叮咚、叮咚)231KD154/KD154B?光控音乐电路232KD155?音乐电路(雀叫、声控)233KD156?音乐电路(鸟叫、余音叮咚)233KD167?音乐电路234KD253?音乐电路(双音叮咚)234KD253B?音乐电路(余音叮咚)235KD254?多种合成音乐电路236KD482?音乐电路(12首名曲)236KD482FC?石英钟定时、音乐打点电路237KD482G?音乐电路(7首双音乐曲)237KD482H?程控语言(中文)报时电路238KD482Ⅰ?音乐电路(16首世界名曲)239KD5603/KD5604?音乐电路(欢迎光临/谢谢光临)239 KD5605?音乐电路(猫叫)240KD5608?音乐电路(狗叫)241KD5609?音乐电路(公鸡叫)241KD56010?音乐电路(恭喜发财)242KD56011?音乐电路(小鸡叫)242KD56012?音乐电路(鸟叫)243KD56013?音乐电路(青蛙叫)243KD56014?音乐电路(鹅叫)244KD56015?音乐电路(蝉叫)244KD56016?音乐电路(马叫)245KD56017?音乐电路(羊叫)245KD56018?音乐电路(蟋蟀叫)246KD56023?音乐电路(哈哈笑)246KD9300?音乐电路(一首世界名曲)247KD9561B?音乐电路(嘀嘟、嘀嘟)247KD9562?音乐电路(枪声)248KD9562B?音乐电路(光控报警声)249KD9562C?音乐电路(单键8音)249KD9563A?音乐电路(三声二闪光)250KD9565?音乐电路(六声五闪光)251KDA0316LN?音频D/A转换电路251KIA6003?FM中频放大电路252KIA6040P?FM/AM中频放大电路253KIA6043S?立体声解码电路254KIA6280H?双声道音频功率放大电路255KIA8127F?单片FM/AM收音机电路256KM44C1000B?语音存储器(ARAM)257KT8554N?编/解码电路258LA1130?AM中频放大电路259LA1135?AM调谐电路260LA1140?FM中频放大电路261LA1210?AM/FM中放及AM混频电路262LA1231N?FM中放、鉴频、AGC及AFC电路263LA1235?FM中频放大电路265LA1245?AM混频、中放及检波电路266LA1260?AM/FM中放及AM混频电路267LA1265?AM/FM中放及AM混频电路268LA1816?单片收音机电路269LA2000?自动选曲电路270LA2785?杜比定向逻辑解码电路271LA3160?双声道低噪声音频均衡放大电路273LA3161/LA3161A?双声道低噪声音频均衡放大电路274LA3210/LA3210B?低噪声音频均衡放大电路275LA3220?具有ALC的双声道音频均衡放大电路277LA3361?锁相环调频立体声解码电路278LA3365?锁相环调频立体声解码电路279LA3370?锁相环调频立体声解码电路280LA3600?五段图示均衡放大电路281LA4100(1.0W)/LA4101(1.5W)/LA4102(2.1W)?音频功率放大电路282 LA4112?27W音频功率放大电路284LA4120?1W×2音频功率放大电路285LA4125/LA4125T?24W×2音频功率放大电路286LA4135?21W音频功率放大电路287LA4160?22W音频功率放大电路288LA4162?05W音频功率放大电路289LA4185?24W×2音频功率放大电路290LA4220?35W音频功率放大电路292LA4225?音频功率放大电路293LA4261?立体声功率放大电路293LA4270?6W×2音频功率放大电路294LA4275?重低音功率放大电路295LA4282?10W×2音频功率放大电路296LA4440?6W×2音频功率放大电路297LA4445?双声道音频功率放大电路298LA4520?立体声耳机功率放大电路299LA4533?双声道音频功率放大电路300LA4550?21W×2音频功率放大电路301LA4570?双声道音频功率放大电路302LA4581MB?立体声放音电路303LA4582C?音频功率放大电路304LA4585M?单片放音电路305LA6324?四运算放大器306LA7016?电子开关307LAG665D/F?单片立体声放音电路309LB1403/LB1403N?LED电平显示驱动电路311LB1405?LED电平显示驱动电路312LB1409?LED电平显示驱动电路313LB3500?FM本振频率分频电路314LC5872?系统控制微处理器315LC7218?锁相环频率合成电路318LC7230?数字调谐微处理器318LC7265?数字显示(LED)驱动电路321LC7267?数字显示(LED)驱动电路323LC7515?5曲自动选曲电路325LC7538?电子音量控制电路326LC7821N?双声道8路模拟电子开关电路328LC7872E?CD－G译码电路329LC78815M?双声道16bitD／A变换电路331LM324/LM324A/LM324N?四运算放大器333LR381641?CD唱机主轴、字符控制电路335LS0072?单片变音电路337LS1240A?电话机振铃电路337M5130/M5130P?具有ALC的双声道音频前置放大电路338 M5201AL?音频混合放大电路340M5218AP?双运算放大器340M5285FP?双声道音频前置放大电路341M38197MA79F?CD唱机系统控制与显示驱动电路342M51102/M51102L?55W×2音频功率放大电路346M51131L?话筒演唱及混响音量控制电路347M51301/M51301P?具有ALC的双声道音频前置放大电路348 M51515BL/M51515L?55W×2音频功率放大电路350M51521AL/M51521L?双声道音频前置放大电路351M51543P?双声道音频前置放大电路353M51544AL/M51544L?双声道音频前置放大电路354M51598FP?CD唱机射频预放大电路355M51903L?LED显示驱动电路356M52131FP?CD唱机伺服电路357M62438FP?SRS?3D音频处理电路359M65839SP?全功能数字卡拉OK电路360M65840?变调型卡拉OK电路361M65843AFP?数字回声信号处理电路363M65844AP?数字回声信号处理电路364M65850P?数字混响信号处理电路365MB3110A?超低音频信号处理电路366MC4558?双运算放大器367MC14066BPC?四组双向模拟开关368MC34012?电话机振铃电路369MC34114?电话机通话电路369MM5430N?数字调谐微处理器371MN1402STN?全逻辑电路372MN3101?专用时钟驱动电路373MN3102?专用时钟驱动电路374MN3108?专用时钟驱动电路375MN3207?BBD音频延时电路376MN3208?BBD音频延时电路376MN662740RE?CD唱机数字和伺服信号处理、数字滤波及D/A变换电路377MN67730MH?数字音频解码电路380MSP3410D?I2C控制多制式音频信号处理电路382MSP4315D－A1?2C控制多制式音频信号处理电路385NE567/SE567?音调解码/锁相环电路387NE570?降噪处理电路388NE5532AN/NE5532N?内部补偿低噪声双运算放大器389NJM2063A/NJM2063AM?杜比B型降噪电路390NJM2072M?SLSS标准信号检测电路392NJM2177A?杜比逻辑定向环绕声解码电路392NJM2234L?声道控制开关394NJM4558/NJM4558D/NJM4558DD?双运算放大器395NJU4052?双4选1模拟开关397NJU9701?单片数字延时电路398NJW1103?杜比定向逻辑解码电路399PCM1710U?音频D/A变换电路401PCM1712L?音频D/A变换电路402PCM1716E?音频DAC电路404PCM1734UB－E2?音频DAC(51)电路405PCM1800?数字音频解码电路406PD2395?数字音频回响电路407PDG037?CD唱机系统控制微处理器409PT2399?音频数字延迟混响电路412SAA7283ZP?丽音解调解码电路413SAA7345?数字信号处理电路415SAA7372?数字信号处理和数字伺服电路417SAA9860?Hi－Ｆi多功能音效处理电路419SDV1810?音/视频信号处理电路420SECL810?音频信号控制电路424SM5840?CD唱机数字滤波器425SM5875BM?音频D/A变换电路426SN74LS02N?2输入端四与非门427STK4191/STK4191Ⅱ?50W音频功率放大电路428STK4352?7W×2音频功率放大电路430STK4362?10W音频功率放大电路431STK4392?15W×2音频功率放大电路432T1400?接收频率数字显示电路433TA1216AN?三声道音频信号处理电路434TA2047N?NICAM系统模拟滤波电路436TA2136F/TA2136N?声音重演信号(SRS)处理电路437TA7120P/TA7120P－C?低噪声音频前置放大电路439TA7130P?FM中放及检波电路440TA7137P?具有ALC的音频前置放大电路441TA7205/TA7205AP/TA7205P?58音频功率放大电路442TA7215P?22W×2音频功率放大电路444TA7222AP?58W音频功率放大电路445TA7227P?55W×2音频功率放大电路446TA7230P?24W×2音频功率放大电路447TA7232P?22W×2音频功率放大电路448TA7233AP/TA7233P?45W×2音频功率放大电路449TA7240/TA7240AP/TA7240P?58W×2音频功率放大电路450 TA7270/TA7270P?58W×2音频功率放大电路452TA7291P?加载电机驱动电路453TA7324P?噪声抑制电路454TA7325P?双声道音频前置放大电路455TA7335P?FM调谐电路456TA7341P?自动选曲电路457TA7342P?锁相环调频立体声解码电路458TA7343/TA7343AP/TA7343P?锁相环调频立体声解码电路459TA7358AP/TA7358P?FM前级放大电路460TA7368F?11W音频功率放大电路462TA7373F?锁相环调频立体声解码电路463TA7376P?400mW×2音频功率放大电路464TA7405P?双声道音频前置正反向自动翻转电路465TA7508P?四运算放大器466TA7604AP/TA7604P?锁相环调频立体声解码电路467TA7628AP/TA7628HP/TA7628P?音频前置及功率放大电路469TA7630P?双声道音量、高音、低音控制电路471TA7640AP?FM/AM中频放大电路472TA7641/TA7641AP/TA7641BP/TA7641E?单片M收音机电路474TA7666P?LED电平显示驱动电路476TA7668AP/TA7668BP/TA7668P?具有ALC的双声道音频前置放大电路477 TA7688F?双声道耳机驱动电路479TA7757P?FM/AM中频放大电路480TA7766F?FM立体声解码电路481TA7770N?杜比B型降噪电路483TA7780N?轻触机芯驱动电路484TA7784P?双声道磁头选择开关、自动翻转及放大电路485TA7792F?FM/AM调谐电路486TA7795F?单片放音电路487TA7796P?多段图示均衡电路488TA8100F?单片FM/AM收音机电路489TA8106F?立体声耳机激励电路490TA8111AP?单片双声道放音电路491TA8115F?单片立体声放音电路492TA8119P?前置放大和耳机驱动电路494TA8122AF?FM/AM收录机电路496TA8126F?电子调谐用DC/DC转换电路497TA8127F/TA8127N?AM调谐及多路解码电路498TA8132F/TA8132N/TA8132AF/TA8132AN?AM/FM中频放大电路501TA8152AFN?TV/FM收音机电路504TA8155F?单片录/放音电路505TA8158F?FM收音机调谐电路506TA8164P?FM/AM收音机电路507TA8173AP?环绕声信号处理电路508TA8184P?环绕声音量控制电路509TA8200AH?双声道音频功率放大电路509TA8210AH?22W×2双声道音频功率放大电路510TA8211AH?双声道音频功率放大电路511TA8213K?重低音功率放大电路512TA8218AH?音频功率放大电路513TA8256H?6W×3音频功率放大电路515TA8628/TA8628N?具有电子音量控制的AV／TV开关电路516 TA8776N?环绕声信号处理电路518TA75393S?双电压比较器520TA75458P?双运算放大器521TA75558P?双运算放大器522TB1204N?NICAM解码电路523TB1212N?丽音信号处理电路526TB2003－004FN?系统控制微处理器528TBA820L/TBA820M/TBA820MS?2W音频功率放大电路529 TBA2800?遥控信号接收电路531TC4052B/TC4052BP?双4选1模拟开关532TC4053AP?三组2路双向模拟开关534TC4066AP/TC4066BP/TC4066DP?四组双向模拟开关536TC74HCT7007AF?音频转换电路538TC7SHU04FTL?音频转换电路539TC7W32FTE12L?51声道音频信号处理电路539TC9121P?轻触电子逻辑控制电路540TC9127P?锁相环电路542TC9134P?系统控制微处理器543TC9136P?数字调谐微处理器545TC9138AP?15曲自动选曲电路547TC9146AP?数字调谐微处理器549TC9147AP?数字调谐微处理器551TC9150P?红外遥控解码电路552TC9153P?双声道电子音量控制电路553TC9157AP?系统控制电路555TC9165P?5曲电脑选曲电路557TC9167P?9曲电脑选曲电路558TC9289F/TC9289P/TC9289N?卡拉OK电路560TC9300F－003?数字调谐微处理器561TC9303AN?数字调谐微处理器564TC9305－035?系统逻辑控制电路565TC9307－010?数字调谐微处理器566TC9308AF－029?数字调谐微处理器568TC9312N?可编程电机控制电路570TC9409BF?环绕声信号处理电路571TC9412AFELP?话筒音量调整电路573TC9415N?数码卡拉OK电路574TC9444F003?卡拉OK?DSP电路575TD134AF?双模前置预分频电路577TD6104P?FM预分频电路577TD6301AP?荧光显示驱动电路578TDA1013B?音频功率放大电路580TDA1083?FM/AM收音机电路581TDA1301?CD唱机数字伺服电路582TDA1302?CD唱机射频放大电路583TDA1520?20W音频功率放大电路584TDA1521?12Ｗ×2?Hi－Fi音频功率放大电路585TDA1521A?6W×2?Hi－Fi音频功率放大电路586TDA1522?20W×2音频功率放大电路586TDA1524/TDA1524A?立体声音量／音调控制电路587TDA1543?数字控制变换电路589TDA1602A?单片Hi－Fi录/放音电路590TDA2003?10W音频功率放大电路591TDA2004?10W×2音频功率放大电路592TDA2005?10W×2音频功率放大电路593TDA2006?12W音频功率放大电路594TDA2007?双声道音频功率放大电路595TDA2009/TDA2009A?10W×2音频功率放大电路596TDA2320A?双声道音频前置放大电路597TDA2611A/TDA2611AQ?5W音频功率放大电路598TDA2616/TDA2616Q?12W×2具有静音功能的Hi－Fi音频功率放大电路600 TDA2820M?1W×2音频功率放大电路601TDA2822M?14W×2音频功率放大电路602TDA3810?混响、立体声和模拟立体声放大电路603TDA7010T?FM收音机电路604TDA7021T?单片FM收音机电路605TDA7050?035Ｗ×2音频功率放大电路606TDA7056A?超重低音功率放大电路607105103105822。

M16C/30P GroupSINGLE-CHIP 16-BIT CMOS MICROCOMPUTER REJ03B0088-0122Rev.1.22Mar 30, 20071.OverviewThe M16C/30P Group of single-chip microcomputers is built using the high-performance silicon gate CMOS process using a M16C/60 Series CPU core and is packaged in a 100-pin plastic molded QFP.These single-chip microcomputers operate using sophisticated instructions featuring a high level of instruction efficiency. With 1 Mbyte of address space, they are capable of executing instructions at high speed. In addition, these microcomputers contain a multiplier and DMAC which combined with fast instruction processing capability, make it suitable for control of various OA, communication, and industrial equipment which requires high-speed arithmetic/ logic operations.1.1ApplicationsAudio, cameras, TV, home appliance, office/communications/portable/industrial equipment, etc.1.2Performance OutlineTable 1.1 lists Performance Outline of M16C/30P Group.NOTES:1.I 2C bus is a registered trademark of Koninklijke Philips Electronics N. V.2.IEBus is a registered trademark of NEC Electronics Corporation.e the M16C/30P on VCC1 = VCC2.Table 1.1Performance Outline of M16C/30P GroupItem PerformanceCPU Number of Basic Instructions 91 instructionsMinimum Instruction Execution Time 62.5ns(f(XIN)=16MHz, VCC1=VCC2=3.0 to 5.5V, no wait)100ns(f(XIN)=10MHz, VCC1=VCC2=2.7 to 5.5V, no wait)Operation Mode Single-chip, memory expansion and microprocessormodeMemory Space 1 Mbyte Memory Capacity See Table 1.2 Product ListPeripheral Function Port Input/Output : 87 pins, Input : 1 pin Multifunction Timer Timer A : 16 bits x 3 channels,Timer B : 16 bits x 3 channelsSerial Interface 1 channelsClock synchronous, UART, I 2CBus (1), IEBus (2)2 channelsClock synchronous, UART, I 2CBus (1)A/D Converter 10-bit A/D converter: 1 circuit, 18 channels DMAC 2 channels CRC Calculation Circuit CCITT-CRC Watchdog Timer 15 bits x 1 channel (with prescaler)Interrupt Internal: 20 sources, External: 7 sources, Software: 4sources, Priority level: 7 levelsClock Generating Circuit 2 circuitsMain clock generation circuit (*), Subclock generation circuit (*),(*)Equipped with a built-in feedback resistor.Electric Characteristics Supply Voltage VCC1=VCC2=3.0 to 5.5 V (f(XIN)=16MHz)VCC1=VCC2=2.7 to 5.5 V (f(XIN)=10MHz, no wait)Power Consumption 10 mA (VCC1=VCC2=5V, f(XIN)=16MHz)8 mA (VCC1=VCC2=3V, f(XIN)=10MHz)1.8 μA (VCC1=VCC2=3V, f(XCIN)=32kHz, wait mode)0.7 μA(VCC1=VCC2=3V, stop mode)One time flash versionProgram Supply Voltage 3.3±0.3 V or 5.0±0.5 V Flash memory version Program/Erase Supply Voltage3.3±0.3 V or 5.0±0.5 V Program and Erase Endurance100 times (all area)Operating Ambient Temperature -20 to 85°C, -40 to 85°C Package 100-pin plastic mold QFP , LQFP1.3Block DiagramFigure 1.1 is a M16C/30P Group Block Diagram.1.4Product ListTable 1.2 lists the M16C/30P group products and Figure 1.2 shows the Part No., Memory Size, and Package. Table 1.4 lists Product Code of MASK ROM version for M16C/30P. Figure 1.3 shows the Marking Diagram of Mask ROM Version for M16C/30P (Top View). Table 1.5 lists Product Code of One Time Flash version, Flash Memory version, and ROM-less version for M16C/30P. Figure 1.4 shows the Marking Diagram of One Time Flash version,Flash Memory version, and ROM-less Version for M16C/30P (Top View). Please specify the marking for M16C30P (MASK ROM version) when placing an order for ROM.(D): Under development (P): Under planning NOTES:1.Previous package codes are as follows.PRQP0100JB-A : 100P6S-A, PLQP0100KB-A : 100P6Q-A2.Block A (4-Kbytes space) is available in flash memory version.Table 1.2Product List (1)As of March 2007Part No.ROM Capacity RAM Capacity package code (1)Remarks M30302MAP-XXXFP 96 Kbytes 5 KbytesPRQP0100JB-A Mask ROM versionM30302MAP-XXXGP PLQP0100KB-A M30302MCP-XXXFP 128 Kbytes PRQP0100JB-A M30302MCP-XXXGP PLQP0100KB-A M30302MDP-XXXFP 160 Kbytes 6 Kbytes PRQP0100JB-A M30302MDP-XXXGP PLQP0100KB-A M30302MEP-XXXFP 192 Kbytes PRQP0100JB-A M30302MEP-XXXGP PLQP0100KB-A M30302GAPFP 96 Kbytes 5 Kbytes PRQP0100JB-A One Time Flash version(blank product)M30302GAPGP (D)PLQP0100KB-A M30302GCPFP 128 Kbytes PRQP0100JB-A M30302GCPGP (D)PLQP0100KB-A M30302GDPFP 160 Kbytes 6 Kbytes PRQP0100JB-A M30302GDPGP (D)PLQP0100KB-A M30304GDPFP (D)12 Kbytes PRQP0100JB-A M30304GDPGP (D)PLQP0100KB-A M30302GEPFP 192 Kbytes 6 Kbytes PRQP0100JB-A M30302GEPGP (D)PLQP0100KB-A M30304GEPFP (D)12 KbytesPRQP0100JB-A M30304GEPGP (D)PLQP0100KB-A M30302GGPFP (D)256 Kbytes 12 Kbytes PRQP0100JB-A M30302GGPGP(D)PLQP0100KB-A M30302GAP-XXXFP 96 Kbytes5 Kbytes PRQP0100JB-A One Time Flash version(factory programmed product)M30302GAPvGP (D)PLQP0100KB-A M30302GCP-XXXFP 128 Kbytes PRQP0100JB-A M30302GCP-XXXGP (D)PLQP0100KB-A M30302GDP-XXXFP 160 Kbytes 6 Kbytes PRQP0100JB-A M30302GDP-XXXGP (D)PLQP0100KB-A M30304GDP-XXXFP (D)12 Kbytes PRQP0100JB-A M30304GDP-XXXGP (D)PLQP0100KB-A M30302GEP-XXXFP 192 Kbytes 6 Kbytes PRQP0100JB-A M30302GEP-XXXGP (D)PLQP0100KB-A M30304GEP-XXXFP (D)12 KbytesPRQP0100JB-A M30304GEP-XXXGP (D)PLQP0100KB-A M30302GGP-XXXFP (D)256 Kbytes12 Kbytes PRQP0100JB-A M30302GGP-XXXGP(D)PLQP0100KB-ATable 1.3Product List (2)As of March 2007(D): Under development (P): Under planning NOTES:1.Previous package codes are as follows.PRQP0100JB-A : 100P6S-A, PLQP0100KB-A : 100P6Q-A2.Block A (4-Kbytes space) is available in flash memory version.Part No.ROM Capacity RAM Capacity package code (1)Remarks M30302FAPFP 96 K + 4 Kbytes 5 KbytesPRQP0100JB-A Flash memory version (2)M30302FAPGP PLQP0100KB-A M30302FCPFP 128 K + 4 Kbytes PRQP0100JB-A M30302FCPGP PLQP0100KB-A M30302FEPFP 192 K + 4 Kbytes 6 Kbytes PRQP0100JB-A M30302FEPGP PLQP0100KB-A M30302SPFP - 6 Kbytes PRQP0100JB-A ROM-less versionM30302SPGPPLQP0100KB-ATable 1.4Product Code of MASK ROM version for M16C/30P Product Code Package Operating Ambient Temperature U1 Lead-free-20°C to 85°CU4 -40°C to 85°CNOTES:The one time flash version can be written once only.Version for M16C/30P (Top View)Table 1.5Product Code of One Time Flash version, Flash Memory version, and ROM-less version for M16C/30PProduct CodePackageInternal ROMOperating Ambient TemperatureProgram and Erase EnduranceTemperature RangeOne Time Flash version U3 Lead-free 00°C to 60°C -40°C to 85°CU5 -20°C to 85°C Flash Memory versionU3 Lead-free 1000°C to 60°C -40°C to 85°C U5 -20°C to 85°C ROM-less versionU3Lead-free −−-40°C to 85°C U5 -20°C to 85°C1.5Pin ConfigurationFigures 1.5 to 1.6 show the pin configurations (top view).Table 1.6Pin Characteristics (1)Pin No.ControlPin Port Interrupt Pin Timer Pin UART Pin Analog PinBus ControlPinFP GP199P9_6ANEX12100P9_5ANEX031P9_442P9_353P9_2TB2IN64P9_1TB1IN75P9_0TB0IN86BYTE97CNVSS108XCIN P8_7119XCOUT P8_61210RESET1311XOUT1412VSS1513XIN1614VCC11715P8_5NMI1816P8_4INT21917P8_3INT12018P8_2INT02119P8_12220P8_02321P7_72422P7_62523P7_5TA2IN2624P7_4TA2OUT2725P7_3TA1IN CTS2/RTS22826P7_2TA1OUT CLK22927P7_1TA0IN RXD2/SCL23028P7_0TA0OUT TXD2/SDA23129P6_7TXD1/SDA13230P6_6RXD1/SCL13331P6_5CLK13432P6_4CTS1/RTS1/CTS0/CLKS13533P6_3TXD0/SDA03634P6_2RXD0/SCL03735P6_1CLK03836P6_0CTS0/RTS03937P5_7RDY/CLKOUT 4038P5_6ALE4139P5_5HOLD4240P5_4HLDA4341P5_3BCLK4442P5_2RD4543P5_1WRH/BHE 4644P5_0WRL/WR 4745P4_7CS34846P4_6CS24947P4_5CS15048P4_4CS0Table 1.7Pin Characteristics (2)Pin No.Control Pin Port Interrupt Pin Timer Pin UART Pin Analog Pin Bus Control Pin FP GP5149P4_3A195250P4_2A185351P4_1A175452P4_0A165553P3_7A155654P3_6A145755P3_5A135856P3_4A125957P3_3A116058P3_2A106159P3_1A96260VCC26361P3_0A86462VSS6563P2_7A76664P2_6A66765P2_5A56866P2_4A46967P2_3A37068P2_2A27169P2_1A17270P2_0A07371P1_7D157472P1_6INT4D147573P1_5INT3D137674P1_4D127775P1_3D117876P1_2D107977P1_1D98078P1_0D88179P0_7AN0_7D78280P0_6AN0_6D68381P0_5AN0_5D58482P0_4AN0_4D48583P0_3AN0_3D38684P0_2AN0_2D28785P0_1AN0_1D18886P0_0AN0_0D08987P10_7KI3AN79088P10_6KI2AN69189P10_5KI1AN59290P10_4KI0AN49391P10_3AN39492P10_2AN29593P10_1AN19694AVSS9795P10_0AN09896VREF9997AVCC10098P9_7ADTRG1.6Pin DescriptionI : Input O : Output I/O : Input and outputTable 1.8Pin Description (1)Signal Name Pin Name I/O Type DescriptionPower supply input VCC1, VCC2VSS I Apply 2.7 to 5.5 V to the VCC1 and VCC2 pins and 0 V to the V SSpin. The VCC apply condition is that VCC1 = VCC2.Analog power supply input AVCC AVSS I Applies the power supply for the A/D converter. Connect the AVCCpin to VCC1. Connect the AVSS pin to VSS.Reset input RESET I The microcomputer is in a reset state when applying “L” to the thisVSSCNVSSI Switches processor mode. Connect this pin to VSS to when aftera reset to start up in single-chip mode. Connect this pin to VCC1 to start up in microprocessor mode.External data bus width select inputBYTEI Switches the data bus in external memory space. The data bus is16 bits long when the this pin is held "L" and 8 bits long when the this pin is held "H". Set it to either one. Connect this pin to VSS when an single-chip mode.Bus control pins D0 to D7I/O Inputs and outputs data (D0 to D7) when these pins are set as theseparate bus.D8 to D15I/O Inputs and outputs data (D8 to D15) when external 16-bit data busis set as the separate bus.A0 to A19O Output address bits (A0 to A19).CS0 to CS3O Output CS0 to CS3 signals. CS0 to CS3 are chip-select signals tospecify an external space.WRL/WR WRH/BHE RDOOutput WRL, WRH, (WR, BHE), RD signals. WRL and WRH or BHE and WR can be switched by program.• WRL, WRH and RD are selectedThe WRL signal becomes "L" by writing data to an even address in an external memory space.The WRH signal becomes "L" by writing data to an odd address in an external memory space.The RD pin signal becomes "L" by reading data in an external memory space.• WR, BHE and RD are selectedThe WR signal becomes "L" by writing data in an external memory space. The RD signal becomes "L" by reading data in an external memory space.The BHE signal becomes "L" by accessing an odd address.Select WR, BHE and RD for an external 8-bit data bus.ALE O ALE is a signal to latch the address.HOLD I While the HOLD pin is held "L", the microcomputer is placed in a hold state.HLDA O In a hold state, HLDA outputs a "L" signal.RDYIWhile applying a "L" signal to the RDY pin, the microcomputer is placed in a wait state.Table 1.9Pin Description (2)Signal Name Pin Name I/O Type DescriptionMain clock input XIN I I/O pins for the main clock generation circuit. Connect a ceramicresonator or crystal oscillator between XIN and XOUT. To use theexternal clock, input the clock from XIN and leave XOUT open.Main clockoutputXOUT OSub clock input XCIN I I/O pins for a sub clock oscillation circuit. Connect a crystal oscillatorbetween XCIN and XCOUT. To use the external clock, input the clockfrom XCIN and leave XCOUT open.Sub clockoutputXCOUT OClock output CLKOUT O The clock of the same cycle as fC, f8, or f32 is outputted. INT interruptinputINT0 to INT4I Input pins for the INT interrupt.NMI interruptinputNMI I Input pin for the NMI interrupt.Key inputinterrupt inputKI0 to KI3I Input pins for the key input interrupt.Timer A TA0OUT toTA2OUT I/O These are timer A0 to timer A2 I/O pins. (however, the output of TA0OUT for the N-channel open drain output.)TA0IN to TA2IN I These are timer A0 to timer A2 input pins. Timer B TB0IN to TB2IN I These are timer B0 to timer B2 input pins.Serial interface CTS0 to CTS2I These are send control input pins.RTS0 to RTS2 O These are receive control output pins.CLK0 to CLK2I/O These are transfer clock I/O pins.RXD0 to RXD2I These are serial data input pins.TXD0 to TXD2O These are serial data output pins. (however, TXD2 for the N-channelopen drain output.)CLKS1O This is output pin for transfer clock output from multiple pins function.I2C mode SDA0 to SDA2I/O These are serial data I/O pins. (however, SDA2 for the N-channelopen drain output.)SCL0 to SCL2I/O These are transfer clock I/O pins. (however, SCL2 for the N-channelopen drain output.)Referencevoltage inputVREF I Applies the reference voltage for the A/D converter.A/D converter AN0 to AN7,AN0_0 to AN0_7I Analog input pins for the A/D converter.ADTRG I This is an A/D trigger input pin.ANEX0I/O This is the extended analog input pin for the A/D converter, and is theoutput in external op-amp connection mode.ANEX1I This is the extended analog input pin for the A/D converter.I/O port P0_0 to P0_7,P1_0 to P1_7,P2_0 to P2_7,P3_0 to P3_7,P4_0 to P4_7,P5_0 to P5_7,P6_0 to P6_7,P7_0 to P7_7,P9_0 to P9_7,P10_0 to P10_7I/O8-bit I/O ports in CMOS, having a direction register to select an input or output.Each pin is set as an input port or output port. An input port can be setfor a pull-up or for no pull-up in 4-bit unit by program. (however, P7_0and P7_1 for the N-channel open drain output.)P8_0 to P8_4,P8_6, P8_7I/O I/O ports having equivalent functions to P0.Input port P8_5I Input pin for the NMI interrupt. Pin states can be read by the P8_5 bitin the P8 register.I : Input O : Output I/O : Input and output2.Central Processing Unit (CPU)Figure 2.1 shows the CPU registers. The CPU has 13 registers. Of these, R0, R1, R2, R3, A0, A1 and FB comprise a register bank. There are two register banks.2.1Data Registers (R0, R1, R2 and R3)The R0 register consists of 16 bits, and is used mainly for transfers and arithmetic/logic operations. R1 to R3 are the same as R0.The R0 register can be separated between high (R0H) and low (R0L) for use as two 8-bit data registers.R1H and R1L are the same as R0H and R0L. Conversely, R2 and R0 can be combined for use as a 32-bit data register (R2R0). R3R1 is the same as R2R0.2.2Address Registers (A0 and A1)The register A0 consists of 16 bits, and is used for address register indirect addressing and address register relative addressing. They also are used for transfers and logic/logic operations. A1 is the same as A0.In some instructions, registers A1 and A0 can be combined for use as a 32-bit address register (A1A0).2.3Frame Base Register (FB)FB is configured with 16 bits, and is used for FB relative addressing.2.4Interrupt Table Register (INTB)INTB is configured with 20 bits, indicating the start address of an interrupt vector table.2.5Program Counter (PC)PC is configured with 20 bits, indicating the address of an instruction to be executed.2.6User Stack Pointer (USP) and Interrupt Stack Pointer (ISP)Stack pointer (SP) comes in two types: USP and ISP, each configured with 16 bits.Your desired type of stack pointer (USP or ISP) can be selected by the U flag of FLG.2.7Static Base Register (SB)SB is configured with 16 bits, and is used for SB relative addressing.2.8Flag Register (FLG)FLG consists of 11 bits, indicating the CPU status.2.8.1Carry Flag (C Flag)This flag retains a carry, borrow, or shift-out bit that has occurred in the arithmetic/logic unit.2.8.2Debug Flag (D Flag)The D flag is used exclusively for debugging purpose. During normal use, it must be set to “0”.2.8.3Zero Flag (Z Flag)This flag is set to “1” when an arithmetic operation resulted in 0; otherwise, it is “0”.2.8.4Sign Flag (S Flag)This flag is set to “1” when an arithmetic operation resulted in a negative value; otherwise, it is “0”.2.8.5Register Bank Select Flag (B Flag)Register bank 0 is selected when this flag is “0” ; register bank 1 is selected when this flag is “1”.2.8.6Overflow Flag (O Flag)This flag is set to “1” when the operation resulted in an overflow; otherwise, it is “0”.2.8.7Interrupt Enable Flag (I Flag)This flag enables a maskable interrupt.Maskable interrupts are disabled when the I flag is “0”, and are enabled when the I flag is “1”. The I flagis cleared to “0” when the interrupt request is accepted.2.8.8Stack Pointer Select Flag (U Flag)ISP is selected when the U flag is “0”; USP is selected when the U flag is “1”.The U flag is cleared to “0” when a hardware interrupt request is accepted or an INT instruction for software interrupt Nos. 0 to 31 is executed.2.8.9Processor Interrupt Priority Level (IPL)IPL is configured with three bits, for specification of up to eight processor interrupt priority levels from level 0 to level 7.If a requested interrupt has priority greater than IPL, the interrupt is enabled.2.8.10Reserved AreaWhen write to this bit, write “0”. When read, its content is indeterminate.M16C/30P Group 3. Memory3.MemoryFigure 3.1 is a Memory Map of the M16C/30P group. The address space extends the 1 Mbyte from address 00000h to FFFFFh.The internal ROM is allocated in a lower address direction beginning with address FFFFFh. For example, a 64-Kbyte internal ROM is allocated to the addresses from F0000h to FFFFFh.The fixed interrupt vector table is allocated to the addresses from FFFDCh to FFFFFh. Therefore, store the start address of each interrupt routine here.The internal RAM is allocated in an upper address direction beginning with address 00400h. For example, a 5-Kbyte internal RAM is allocated to the addresses from 00400h to 017FFh. In addition to storing data, the internal RAM also stores the stack used when calling subroutines and when interrupts are generated. The SFR is allocated to the addresses from 00000h to 003FFh. Peripheral function control registers are located here. Of the SFR, any area which has no functions allocated is reserved for future use and cannot be used by users.The special page vector table is allocated to the addresses from FFE00h to FFFDBh. This vector is used by the JMPS or JSRS instruction. For details, refer to the M16C/60 and M16C/20 Series Software Manual.4.Special Function Register (SFR)SFR(Special Function Register) is the control register of peripheral functions. Tables 4.1 to 4.5 list the SFR information.NOTES:1.The blank areas are reserved and cannot be accessed by users.2.The PM00 and PM01 bits do not change at software reset.X : Nothing is mapped to this bitTable 4.1SFR Information (1) (1)Address RegisterSymbolAfter Reset0000h 0001h 0002h 0003h 0004h Processor Mode Register 0 (2)PM000000000b(CNVSS pin is “L”)00000011b(CNVSS pin is “H”)0005h Processor Mode Register 1PM100XXX0X0b 0006h System Clock Control Register 0CM001001000b 0007h System Clock Control Register 1CM100100000b 0008h Chip Select Control RegisterCSR 00000001b 0009h Address Match Interrupt Enable Register AIER XXXXXX00b 000Ah Protect RegisterPRCRXX000000b000Bh 000Ch 000Dh 000Eh Watchdog Timer Start Register WDTS XXh000Fh Watchdog Timer Control Register WDC 00XXXXXXb 0010h Address Match Interrupt Register 0RMAD000h 0011h 00h 0012h X0h 0013h 0014h Address Match Interrupt Register 1RMAD100h 0015h 00h 0016h X0h0017h 0018h 0019h 001Ah 001Bh 001Ch 001Dh 001Eh 001Fh 0020h DMA0 Source Pointer SAR0XXh 0021h XXh 0022h XXh 0023h 0024h DMA0 Destination Pointer DAR0XXh 0025h XXh 0026h XXh 0027h 0028h DMA0 Transfer Counter TCR0XXh 0029h XXh002Ah 002Bh 002Ch DMA0 Control Register DM0CON 00000X00b002Dh 002Eh 002Fh 0030h DMA1 Source Pointer SAR1XXh 0031h XXh 0032h XXh 0033h 0034h DMA1 Destination Pointer DAR1XXh 0035h XXh 0036h XXh 0037h 0038h DMA1 Transfer Counter TCR1XXh 0039h XXh003Ah 003Bh 003Ch DMA1 Control Register DM1CON 00000X00b003Dh 003Eh 003FhTable 4.2SFR Information (2) NOTES:1.The blank areas are reserved and cannot be accessed by users.2.This register is included in the flash memory version.3.This register is included in the flash memory version and one time flash version. X : Nothing is mapped to this bitAddress RegisterSymbolAfter Reset0040h 0041h 0042h 0043h 0044h INT3 Interrupt Control RegisterINT3IC XX00X000b 0045h 0046h UART1 BUS Collision Detection Interrupt Control Register U1BCNIC XXXXX000b 0047h UART0 BUS Collision Detection Interrupt Control Register U0BCNIC XXXXX000b 0048h 0049h INT4 Interrupt Control RegisterINT4IC XX00X000b 004Ah UART2 Bus Collision Detection Interrupt Control Register BCNIC XXXXX000b 004Bh DMA0 Interrupt Control Register DM0IC XXXXX000b 004Ch DMA1 Interrupt Control Register DM1IC XXXXX000b 004Dh Key Input Interrupt Control RegisterKUPIC XXXXX000b 004Eh A/D Conversion Interrupt Control Register ADIC XXXXX000b 004Fh UART2 Transmit Interrupt Control Register S2TIC XXXXX000b 0050h UART2 Receive Interrupt Control Register S2RIC XXXXX000b 0051h UART0 Transmit Interrupt Control Register S0TIC XXXXX000b 0052h UART0 Receive Interrupt Control Register S0RIC XXXXX000b 0053h UART1 Transmit Interrupt Control Register S1TIC XXXXX000b 0054h UART1 Receive Interrupt Control Register S1RIC XXXXX000b 0055h Timer A0 Interrupt Control Register TA0IC XXXXX000b 0056h Timer A1 Interrupt Control Register TA1IC XXXXX000b 0057h Timer A2 Interrupt Control RegisterTA2ICXXXXX000b0058h 0059h 005Ah Timer B0 Interrupt Control Register TB0IC XXXXX000b 005Bh Timer B1 Interrupt Control Register TB1IC XXXXX000b 005Ch Timer B2 Interrupt Control Register TB2IC XXXXX000b 005Dh INT0 Interrupt Control Register INT0IC XX00X000b 005Eh INT1 Interrupt Control Register INT1IC XX00X000b 005Fh INT2 Interrupt Control Register INT2IC XX00X000b0060h to 01AFh 01B0h 01B1h 01B2h 01B3h 01B4h 01B5h Flash Memory Control Register 1 (2)FMR10X00XX0Xb 01B6h 01B7h Flash Memory Control Register 0 (3) FMR000000001b01B8h 01B9h 01BAh 01BBh 01BCh 01BDh 01BEh 01BFh 01C0h to 024Fh 0250h 0251h 0252h 0253h 0254h 0255h 0256h 0257h 0258h 0259h 025Ah 025Bh 025Ch 025Dh 025Eh Peripheral Clock Select Register PCLKR 00000011b025Fh 0260h to 033FhTable 4.3SFR Information (3)Address Register Symbol After Reset 0340h0341h0342h0343h0344h0345h0346h0347h0348h0349h034Ah034Bh034Ch034Dh034Eh034Fh0350h0351h0352h0353h0354h0355h0356h0357h0358h0359h035Ah035Bh035Ch035Dh035Eh Interrupt Factor Select Register 2IFSR2A00XXXXXXb035Fh Interrupt Factor Select Register IFSR00h0360h0361h0362h0363h0364h0365h0366h0367h0368h0369h036Ah036Bh036Ch UART0 Special Mode Register 4U0SMR400h036Dh UART0 Special Mode Register 3U0SMR3000X0X0Xb036Eh UART0 Special Mode Register 2U0SMR2X0000000b036Fh UART0 Special Mode Register U0SMR X0000000b0370h UART1 Special Mode Register 4U1SMR400h0371h UART1 Special Mode Register 3U1SMR3000X0X0Xb0372h UART1 Special Mode Register 2U1SMR2X0000000b0373h UART1 Special Mode Register U1SMR X0000000b0374h UART2 Special Mode Register 4U2SMR400h0375h UART2 Special Mode Register 3U2SMR3000X0X0Xb0376h UART2 Special Mode Register 2U2SMR2X0000000b0377h UART2 Special Mode Register U2SMR X0000000b0378h UART2 Transmit/Receive Mode Register U2MR00h0379h UART2 Bit Rate Generator U2BRG XXh037Ah UART2 Transmit Buffer Register U2TB XXh037Bh XXh037Ch UART2 Transmit/Receive Control Register 0U2C000001000b037Dh UART2 Transmit/Receive Control Register 1U2C100000010b037Eh UART2 Receive Buffer Register U2RB XXh037Fh XXhNOTES:1.The blank areas are reserved and cannot be accessed by users.X : Nothing is mapped to this bitTable 4.4SFR Information (4)Address Register Symbol After Reset 0380h Count Start Flag TABSR000XX000b0381h Clock Prescaler Reset Fag CPSRF0XXXXXXXb 0382h One-Shot Start Flag ONSF00XXX000b0383h Trigger Select Register TRGSR XXXX0000b 0384h Up-Down Flag UDF XX0XX000b (2) 0385h0386h Timer A0 Register TA0XXh0387h XXh0388h Timer A1 Register TA1XXh0389h XXh038Ah Timer A2 Register TA2XXh038Bh XXh038Ch038Dh038Eh038Fh0390h Timer B0 Register TB0XXh0391h XXh0392h Timer B1 Register TB1XXh0393h XXh0394h Timer B2 Register TB2XXh0395h XXh0396h Timer A0 Mode Register TA0MR00h0397h Timer A1 Mode Register TA1MR00h0398h Timer A2 Mode Register TA2MR00h0399h039Ah039Bh Timer B0 Mode Register TB0MR00XX0000b039Ch Timer B1 Mode Register TB1MR00XX0000b039Dh Timer B2 Mode Register TB2MR00XX0000b039Eh039Fh03A0h UART0 Transmit/Receive Mode Register U0MR00h03A1h UART0 Bit Rate Generator U0BRG XXh03A2h UART0 Transmit Buffer Register U0TB XXh03A3h XXh03A4h UART0 Transmit/Receive Control Register 0U0C000001000b03A5h UART0 Transmit/Receive Control Register 1U0C100000010b03A6h UART0 Receive Buffer Register U0RB XXh03A7h XXh03A8h UART1 Transmit/Receive Mode Register U1MR00h03A9h UART1 Bit Rate Generator U1BRG XXh03AAh UART1 Transmit Buffer Register U1TB XXh03ABh XXh03ACh UART1 Transmit/Receive Control Register 0U1C000001000b03ADh UART1 Transmit/Receive Control Register 1U1C100000010b03AEh UART1 Receive Buffer Register U1RB XXh03AFh XXh03B0h UART Transmit/Receive Control Register 2UCON X0000000b03B1h03B2h03B3h03B4h03B5h03B6h03B7h03B8h DMA0 Request Factor Select Register DM0SL00h03B9h03BAh DMA1 Request Factor Select Register DM1SL00h03BBh03BCh CRC Data Register CRCD XXh03BDh XXh03BEh CRC Input Register CRCIN XXh03BFhNOTES:1.The blank areas are reserved and cannot be accessed by users.2.Bit 5 in the Up-down flag is “0” by reset. However, The values in these bits when read are indeterminate.X : Nothing is mapped to this bitTable 4.5SFR Information (5)Address Register Symbol After Reset03C0h A/D Register 0AD0XXh03C1h XXh03C2h A/D Register 1AD1XXh03C3h XXh03C4h A/D Register 2AD2XXh03C5h XXh03C6h A/D Register 3AD3XXh03C7h XXh03C8h A/D Register 4AD4XXh03C9h XXh03CAh A/D Register 5AD5XXh03CBh XXh03CCh A/D Register 6AD6XXh03CDh XXh03CEh A/D Register 7AD7XXh03CFh XXh03D0h03D1h03D2h03D3h03D4h A/D Control Register 2ADCON2XXX000X0b03D5h03D6h A/D Control Register 0ADCON0000X0XXXb03D7h A/D Control Register 1ADCON100000XXXb03D8h03D9h03DAh03DBh03DCh03DDh03DEh03DFh03E0h Port P0 Register P0XXh03E1h Port P1 Register P1XXh03E2h Port P0 Direction Register PD000h03E3h Port P1 Direction Register PD100h03E4h Port P2 Register P2XXh03E5h Port P3 Register P3XXh03E6h Port P2 Direction Register PD200h03E7h Port P3 Direction Register PD300h03E8h Port P4 Register P4XXh03E9h Port P5 Register P5XXh03EAh Port P4 Direction Register PD400h03EBh Port P5 Direction Register PD500h03ECh Port P6 Register P6XXh03EDh Port P7 Register P7XXh03EEh Port P6 Direction Register PD600h03EFh Port P7 Direction Register PD700h03F0h Port P8 Register P8XXh03F1h Port P9 Register P9XXh03F2h Port P8 Direction Register PD800X00000b03F3h Port P9 Direction Register PD900h03F4h Port P10 Register P10XXh03F5h03F6h Port P10 Direction Register PD1000h03F7h03F8h03F9h03FAh03FBh03FCh Pull-Up Control Register 0PUR000h03FDh Pull-Up Control Register 1PUR100000000b (2)00000010b (2)03FEh Pull-Up Control Register 2PUR200h03FFh Port Control Register PCR00hNOTES:1.The blank areas are reserved and cannot be accessed by users.2.At hardware reset, the register is as follows:• “00000000b” where “L” is inputted to the CNVSS pin• “00000010b” where “H” is inputted to the CNVSS pinAt software reset, the register is as follows:• “00000000b” where the PM01 to PM00 bits in the PM0 register are “00b” (single-chip mode).• “00000010b” where the PM01 to PM00 bits in the PM0 register are “01b” (memory expansion mode) or “11b” (microprocessor mode). X : Nothing is mapped to this bit。

英文名称中文名称G X00 50JN1300 T0.5*W295(深)非合金涂塑钢带/0.5*S*C G X00 50JN1300 T0.5*W303(深)非合金涂塑钢带/0.5*S*C G X00 50JN1300 T0.5*W75(深)非合金涂塑钢带/0.5*S*C G X00 50JN700 T0.5*W303电磁钢带/0.5*S*C(50H700) G X00 50JNE470*A1 T0.5*W303电磁钢带/0.5*S*C(50H470) G X00 BALL B轴承G X00 BAND绑扎带G X00 BB PAINT轴承托架G X00 BM轴套G X00 BRIDGE DRIVER M81736FP驱动元件G X00 CAPACITOR电容/非片式单层塑料电介质G X00 CERAMIC CAPACITOR电容/片式多层瓷电介质G X00 CHIP RESISTOR电阻/片式G X00 COMPARATOR IC NJM2403V比较器G X00 CONTRACTION TUBE F2(Z)D1.0 BLACK套管G X00 CONTRACTION TUBE F2(Z)D1.0 BLUE套管G X00 CONTRACTION TUBE F2(Z)D1.0 RED套管G X00 CONTRACTION TUBE F2(Z)D4.0套管G X00 DIODE二极管G X00 DRIVER IC LB11820M-TLM-E驱动元件G X00 DRIVER IC(BD62012FS)集成电路G X00 DRIVER IC(TC78B600FNG)集成电路G X00 EZKTUX1*JDT0.8XW57电镀锌钢带/0.8*S*CG X00 EZKTUX1*JDT0.8XW62电镀锌钢带/0.8*S*CG X00 EZKTUX1*JDT0.8XW73电镀锌钢带/0.8*S*CG X00 EZKTUX1*JDT0.8XW97电镀锌钢带/0.8*S*CG X00 EZKTUX1*JDT1.2XW114电镀锌钢带/1.2*S*CG X00 FERRITE CORE磁环G X00 FERRITIC CORE磁环G X00 FET晶体管G X00 FET 2SK3842(TE24L Q)晶体管G X00 FET ARRAY驱动元件G X00 FET RJU002N06 T106晶体管（功率小于1瓦）G X00 FUSE温度继电器G X00 HALL ELEMENT HG-302C半导体器件G X00 HALL ELEMENT HW-102A-FT半导体器件G X00 HALL IC EW-612B半导体器件G X00 HEADER接插件零件G X00 HEMP STRING#100麻线G X00 LED发光二极管G X00 LED二极管G X00 LOGIC IC CD4018BM96半导体元件G X00 LOGIC IC MC14053BDTR2半导体元件G X00 LOGIC IC TC4053BFT(EL N)半导体元件G X00 LOGIC IC TC74VHC74FT(EL K)半导体元件G X00 LOGIC IC TC74VHCT86AFT(EL)半导体元件G X00 LOGIC IC TC7WH08FU(TE12L F)半导体元件G X00 LOGIC IC TC7WH74FU(TE12L F)半导体元件G X00 MAGNET磁铁G X00 MAGNET (6-43L)磁铁G X00 MAGNET (9-34L)磁铁G X00 MAGNET (9-37L)磁铁G X00 MAGNET CUTTING转动轮G X00 MAGNET RESIN HM-1220KD3塑磁材料G X00 MAGNET RESIN TP-A26FS塑磁材料G X00 MAGNET RESIN TP-A27E(T)塑磁材料G X00 MOS FET RCD060N25晶体管G X00 MOTOR DRIVE IC LB11620T-TLM-E驱动元件G X00 NTC THERMISTOR热敏电阻G X00 OP AMP半导体元件G X00 OP AMP IC BA2904SFV集成电路/用做放大器G X00 O-RING(A)挡圈/非用于民用航空器维护和修理G X00 O-RING(B)挡圈/非用于民用航空器维护和修理G X00 PBT(3015-209S)PBT塑胶粒G X00 PCB电路印刷板G X00 PHOTO COUPLER光电耦合器G X00 POWER IC (BM6201FS)集成电路G X00 POWER IC ECN30107SP驱动元件G X00 POWER IC ECN30107SPR驱动元件G X00 POWER IC ECN30206SP驱动元件G X00 POWER IC ECN30603SP驱动元件G X00 POWER IC LB1976驱动元件G X00 POWER IC NTP1101A驱动元件G X00 POWER IC NTP1102A驱动元件G X00 POWER IC NTP5001驱动元件G X00 POWER IC TPD4121K集成电路G X00 POWER IC TPD4131K集成电路G X00 POWER IC(NTP1101)驱动元件G X00 POWER IC(NTP1102)驱动元件G X00 PTC THERMISTOR热敏电阻G X00 REGULATOR晶体管（功率小于1瓦）G X00 RESET IC半导体器件G X00 RUST VETO HEAVY防锈油G X00 SECC*JD T1.2*W110电镀锌钢带/T=0.23-3.0MMG X00 SECC*JD T1.2*W82电镀锌钢带/T=0.23-3.0MMG X00 SECC-TN 20/20 T0.8XW71电镀锌钢带/0.8*S*CG X00 SECC-TN T1.0*W135电镀锌钢带/T=0.23-3.0MMG X00 SECC-TN T1.0*W163电镀锌钢带/T=0.23-3.0MMG X00 SECC-TN T1.2XW112电镀锌钢带/T=0.23-3.0MMG X00 SECC-TN T1.2XW122电镀锌钢带/1.2*S*CG X00 SECC-TN T1.2XW73电镀锌钢带/T=0.23-3.0MMG X00 SECC-TN T1.2XW88电镀锌钢带/T=0.23-3.0MMG X00 SECC-TN T1.2XW91电镀锌钢带/T=0.23-3.0MMG X00 SECC-TNA T1.0*W78电镀锌钢带/T=0.23-3.0MMG X00 SECC-TNA T1.0*W80电镀锌钢带/T=0.23-3.0MMG X00 SECC-TNA T1.2*W106电镀锌钢带/T=0.23-3.0MMG X00 SECC-TNA T1.2XW110电镀锌钢带/T=0.23-3.0MMG X00 SECC-TNA T1.2XW198电镀锌钢带/T=0.23-3.0MMG X00 SECC-TNA T1.2XW82电镀锌钢带/T=0.23-3.0MMG X00 SECC-TNA T1.2XW90电镀锌钢带/T=0.23-3.0MMG X00 SECC-TNA T1.6*W174电镀锌钢带/T=0.23-3.0MMG X00 SILICON S-295C粘合剂G X00 SIN WAVE IC TB6584FNG集成电路G X00 SINGLE GATE LOGIC MC74HC1G08DTT1G半导体元件G X00 SINGLE GATE LOGIC MC74HC1G86DTT1G半导体元件G X00 SOLDER M33HT无铅焊锡条G X00 SPLICE接插件零件G X00 SWITCH开关G X00 TACK HARD CS-70硅酮密封胶G X00 TCUD-FN 1.2*W132镀锌钢带/T=0.1-3.2MMG X00 TCUD-FN T1.2XW198镀锌钢带/T=0.1-3.2MMG X00 T-DIODE二极管G X00 TERMINAL接插件零件G X00 THERMAL SENSOR IC BDE1000G-TR集成电路G X00 TRANSISTOR晶体管（功率小于1瓦）G X00 TRANSISTOR晶体管G X00 YPF SCREW螺钉/杆径小于等于6毫米G X00 YXA CAPACITOR电容/片式多层瓷电介质G X00 ZENER DIODE二极管G X01 BM轴套G X01 BRIDGE DRIVER ECN33500FP驱动元件G X01 CERAMIC CAPACITOR电容/片式多层瓷电介质G X01 CHIP RESISTOR电阻/贴片式G X01 COMPARATOR IC LM2903DR2比较器G X01 CONNECTOR接插件零件G X01 DIODE二极管G X01 DRIVER IC LB11823M-TLM-E驱动元件G X01 DRIVER IC TB6586集成电路G X01 EMI BEAD CORE滚珠芯G X01 FAN风叶G X01 FERRITE CORE磁环G X01 FET ARRAY MP6622(LBRNDS-S Q)晶体管G X01 FLANGE NUT螺帽G X01 FUSE熔断器G X01 HALL ELEMENT HW-107T-FT(Pb###)半导体器件G X01 HALL IC半导体器件G X01 IC NJM2624AM半导体器件G X01 INSULATING TAPE绝缘胶带G X01 LEAD ASSY组合电线G X01 MAGNET转动轮G X01 MAGNET ASSY转动轮G X01 MAGNET CUTTING转动轮G X01 MOTOR DRIVE IC LB1696-E驱动元件G X01 OIL SEAL密封垫G X01 O-RINGS挡圈/非用于民用航空器维护和修理G X01 OUTSIDE TIE绑扎带G X01 PACKINGS密封垫G X01 PCB电路印刷板G X01 POWER IC ECN30204SP驱动元件G X01 POWER IC ECN30605SP驱动元件G X01 POWER IC NTP3001集成电路G X01 POWER IC SX68003驱动元件G X01 PROCESSING OF WASHER垫圈/非用于民用航空器维护和修理G X01 REGULATOR IC TA58L15S(Q)集成电路G X01 REGULATOR IC TA7805AF(TE16L1 NQ)调节元件G X01 RUBBER橡胶圈G X01 SHAFT转子轴G X01 SIN WAVE IC集成电路G X01 SPONGE RING密封圈G X01 SPRING螺旋弹簧G X01 SPRING PIN弹簧针G X01 SPRING PIN接插件零件G X01 SWITCH开关G X01 TANTALUM CAPACITOR电容/片式多层钽电介质G X01 TAPPING SCREW螺钉/杆径小于等于6毫米G X01 T-DIODE二极管G X01 TRANSISTOR晶体管（功率小于1瓦）G X01 TRANSISTOR晶体管G X01 U RING挡圈/非用于民用航空器维护和修理G X01 WAVE W垫圈/非用于民用航空器维护和修理G X02 DRIVER IC TB6586AFG(O EL DRY)集成电路G X02 4 HIGH-LOW SCREW螺钉/杆径小于等于6毫米G X02 BB轴承托架G X02 BB PAINT轴承托架G X02 BM轴套G X02 BUSHING(B4)导线固定器G X02 CAPACITOR电容/非片式单层铝电介质G X02 CERAMIC CAPACITOR电容/片式多层瓷电介质G X02 CHIP RESISTOR电阻/贴片式G X02 CHIP RESISTOR电阻/片式G X02 CMOS IC MC14013BFELG半导体元件G X02 COILEND COVER(A)外盖G X02 COILEND COVER(B)外盖G X02 CONDENSER电容/片式多层瓷电介质G X02 CONNECTOR接插件零件G X02 COVER外盖G X02 DRIVER IC TB6586FG(O EL DRY)集成电路G X02 EMI CORE滚珠芯G X02 EW-512(HALL IC)半导体器件G X02 FERRITE CORE磁环G X02 FET 2SK3130(Q)晶体管G X02 FET 2SK3326-AZ晶体管G X02 FET 2SK3947(Q)晶体管G X02 FET ARRAY SMA5127驱动元件G X02 FET ARRAY STA513A LF-405晶体管G X02 FET TK12A50D5晶体管G X02 HALL ELEMENT HW-300B-08半导体器件G X02 HALL ELEMENT HW-300B-15半导体器件G X02 HALL IC EW-502-PR半导体器件G X02 HALL IC EW-632-T3半导体器件G X02 HOLDER塑料支架G X02 INSERT BB轴承托架G X02 JUMPER RESISTOR电阻/贴片式G X02 LEAD ASSY组合电线G X02 M3 SCREW WITH WASHER螺钉/杆径小于等于6毫米G X02 MAGMATE TERMINAL接插件零件G X02 MAGNET磁铁G X02 MAGNET (6-19.3L)磁铁G X02 MAGNET (6-47L)磁铁G X02 MAGNET (9-34L)磁铁G X02 MAGNET ASSY转动轮G X02 O-RINGS挡圈/非用于民用航空器维护和修理G X02 PACKINGS密封垫G X02 PC BOARD电路印刷板G X02 PCB电路印刷板G X02 PCB HOLDER塑料支架G X02 POWER IC ECN30601SP-A驱动元件G X02 POWER IC SX68001驱动元件G X02 POWER IC SX68002驱动元件G X02 POWER IC TPD4122K集成电路G X02 PTC THERMISTOR热敏电阻G X02 ROLL BUSH接插件零件G X02 RUBBER橡胶圈G X02 SHAFT转子轴G X02 SIN WAVE IC TB6551FAG集成电路G X02 SIN WAVE IC TB6556FG集成电路G X02 SLINGER橡胶圈G X02 SOLID TANTALUM CAPACITORS电容/非片式多层钽电介质G X02 SPINDLE转子轴G X02 SPRING PIN弹簧针G X02 T-DIODE二极管G X02 TOOTH LOCK W(B)垫圈/非用于民用航空器维护和修理G X02 TP熔断器G X02 TP PUSHING RUBBER橡胶块G X02 TRANSISTOR晶体管（功率小于1瓦）G X02 TRANSISTOR晶体管G X02 TURBO FAN ASSY风叶G X02 TVS二极管G X02 WASHER垫圈/非用于民用航空器维护和修理G X02 WASHER黄铜垫圈/非用于民用航空器维护和修理G X02 WAVE W垫圈/非用于民用航空器维护和修理G X02 ZENER DIODE二极管G X03 4 HIGH-LOW SCREW螺钉/杆径小于等于6毫米G X03 ASSEMBLY SCREW螺钉/杆径小于等于6毫米G X03 BB PAINT轴承托架G X03 BRIDGE DRIVER M81706AFP驱动元件G X03 BUSHING导线固定器G X03 CERAMIC CAPACITOR电容/片式多层瓷电介质G X03 CERAMIC RESONATOR共振件(陶瓷振荡子)G X03 CHIP RESISTOR电阻/片式G X03 CLAMP ME接插件零件G X03 CMOS LOGIC IC MC74HC74ADR2半导体元件G X03 CMOS LOGIC IC MC74HC86ADR2半导体元件G X03 CONED DISC SPRING垫圈/非用于民用航空器维护和修理G X03 DIODE二极管G X03 E RING挡圈/非用于民用航空器维护和修理G X03 FET 2SK3313(Q,T)晶体管G X03 FUSE熔断器G X03 HOLDER塑料支架G X03 LEAD ASSY组合电线G X03 M3 S SCREW螺钉/杆径小于等于6毫米G X03 M3-TAP TITE螺钉/杆径小于等于6毫米G X03 M4 SCREW螺钉/杆径小于等于6毫米G X03 M4 SCREW WITH WASHER螺钉/杆径小于等于6毫米G X03 MAGNET磁铁G X03 MAGNET (6-21.3L)磁铁G X03 MAGNET (6-37L)磁铁G X03 MAGNET ASSY转动轮G X03 O-RING挡圈/非用于民用航空器维护和修理G X03 PCB电路印刷板G X03 POLYGON TUBE套管/个G X03 POWER IC SMA6823M(LF2451)驱动元件G X03 POWER IC TPD4146K驱动元件G X03 PUSH NUT螺帽G X03 RUBBER橡胶圈G X03 SCERW螺钉/杆径小于等于6毫米G X03 SHAFT转子轴G X03 SIN WAVE IC TB6551FG集成电路G X03 SPRING LOCK WASHER垫圈/非用于民用航空器维护和修理G X03 T-DIODE二极管G X03 TP温度继电器G X03 TP(22 SERIES)熔断器G X03 TRANSISTOR晶体管（功率小于1瓦）G X03 TRANSISTOR ARRAY晶体管G X03 WASHER纸质垫圈/非用于民用航空器维护和修理G X03 WASHER垫圈/非用于民用航空器维护和修理G X03 YXA CAPACITOR(250)电容/非片式单层铝电介质G X04 4 HIGH-LOW SCREW螺钉/杆径小于等于6毫米G X04 BASE固定板G X04 BB轴承托架G X04 BB PAINT轴承托架G X04 BEARING METAL轴承托架G X04 C RING挡圈/非用于民用航空器维护和修理G X04 CERAMIC CAPACITOR电容/片式多层瓷电介质G X04 CHIP RESISTOR电阻/片式G X04 DIODE二极管G X04 DRIVER IC 2STB116PM-T驱动元件G X04 DRIVER IC 2STB127PM-T驱动元件G X04 EARTH WIRE ASSY导线G X04 E-RING挡圈/非用于民用航空器维护和修理G X04 FET 2SK3868晶体管G X04 GROUND ASSY导线G X04 H NUT螺帽G X04 IMPELLER叶轮G X04 IMPELLER ASSY风叶G X04 M3 YPF SCREW螺钉/杆径小于等于6毫米G X04 MAGNET磁铁G X04 MAGNET (6-19.3L)磁铁G X04 MAGNET (6-34L)磁铁G X04 MAGNET (9-34L)磁铁G X04 MAGNET ASSY转动轮G X04 PARTITION PLATE固定板G X04 POWER IC SMA6821M(LF2451)驱动元件G X04 POWER IC SMA6822M(LF2451)驱动元件G X04 ROTOR MAGNET磁铁G X04 SHAFT转子轴G X04 SLINGER橡胶圈G X04 T-DIODE二极管G X04 TP温度继电器G X04 TP (L-F SERIES)熔断器G X04 TP HOLDER钢铁支架G X04 TP(V-F SERIES)熔断器G X04 WASHER垫圈/非用于民用航空器维护和修理G X04 WAVE WASHER垫圈/非用于民用航空器维护和修理G X04 YPF SCREW螺钉/杆径小于等于6毫米G X05 BACK YOKE环框G X05 BB轴承托架G X05 BB PAINT轴承托架G X05 BUSHING(A)导线固定器G X05 CASING (B)外壳G X05 CASING A外壳G X05 CONNECTOR接插件零件G X05 CONTACT(SVH-21T-P1.1)接插件零件G X05 COVER外盖G X05 DIODE二极管G X05 FAN风叶G X05 HALL ELEMENT HW-101A-FT半导体器件G X05 IMPELLER ASSY叶轮G X05 LEAD ASSY组合电线G X05 MAGNET磁铁G X05 MECHANICAL SEALS机械密封塞G X05 O-RING挡圈/非用于民用航空器维护和修理G X05 SHAFT转子轴G X05 SIN IC R5F21246SN080FP集成电路G X05 TP(12 SERIES)熔断器G X06 BB轴承托架G X06 BUSH橡胶圈G X06 CERAMIC CAPACITOR电容/片式多层瓷电介质G X06 CHIP RESISTOR电阻/片式G X06 CONNECTOR(VHR-5N)接插件零件G X06 E RING挡圈/非用于民用航空器维护和修理G X06 MAGNET (6-37L)磁铁G X06 O-RING挡圈/非用于民用航空器维护和修理G X06 OUTER COVER外盖G X06 PCB电路印刷板G X06 POWER IC TPD4102AK(LBR Q)驱动元件G X06 POWER IC TPD4102AK(LBRNDSS Q)驱动元件G X06 PTC THERMISTOR热敏电阻G X06 RIVET铆钉G X06 SEFUSE熔断器G X06 T-DIODE二极管G X06 TRANSISTOR晶体管（功率小于1瓦）G X06 WIRE CLAMP导线夹G X07 BB轴承托架G X07 HALL IC半导体器件G X07 HALL IC EW-432-PR半导体器件G X07 MECHANICAL SEALS机械密封塞G X07 PIN BLOCK接插件零件G X07 T-DIODE二极管G X07 TP温度继电器G X08 BM轴套G X08 CERAMIC CAPACITOR电容/片式多层瓷电介质G X08 YOKE MOLD风叶G X09 CERAMIC CAPACITOR电容/片式多层瓷电介质G X09 CHIP RESISTOR电阻/片式G X09 CHIP RESISTOR电阻/贴片式G X09 DISH W垫圈/非用于民用航空器维护和修理G X09 DRAIN CAP排水管盖G X09 M3.SCREW WITH WASHER螺钉/杆径小于等于6毫米G X09 PCB电路印刷板G X09 TP温度继电器G X09 TP HOLDER钢铁支架G X10 BALL B轴承G X10 CONDENSER电容/非片式单层塑料电介质G X11 CASING (A)外壳G X11 CERAMIC CAPACITOR电容/片式多层瓷电介质G X11 O-RING挡圈/非用于民用航空器维护和修理G X11 PCB ASSY电路板组件G X11 SCREW WITH WASHER螺钉/杆径小于等于6毫米G X12 BALL B轴承G X12 BAND导线夹G X12 BASE固定板G X12 CERAMIC CAPACITOR电容/片式多层瓷电介质G X12 CONDENSER电容/非片式单层塑料电介质G X12 IMPELLER叶轮G X12 MG SHROUD磁环G X12 SHAFT转子轴G X14 TP温度继电器G X15 BB轴承托架G X15 WASHER垫圈/非用于民用航空器维护和修理G X17 BALL B轴承G X17 WAVE W垫圈/非用于民用航空器维护和修理G X18 BALL B轴承G X19 BALL B轴承G X20 TP温度继电器G X22 BALL B轴承G X23 PCB ASSY电路板组件G X35 PCB ASSY电路板组件X00 50JN1300 T0.5*W151(深)非合金涂塑钢带/0.5*S*CX00 50JN1300 T0.5*W80.5(深)非合金涂塑钢带/0.5*S*CX00 50NCF(HR3104) T0.5*W87(深)非合金涂塑钢带/0.5*S*CX00 50NCF(HR3104) T0.5*W93(深)非合金涂塑钢带/0.5*S*CX00 50NC-FM T0.5*W100(深)非合金涂塑钢带/0.5*S*CX00 50NC-FM T0.5*W360(深)非合金涂塑钢带/0.5*S*CX00 50NC-FM T0.5*W60(深)非合金涂塑钢带/0.5*S*CX00 50NC-FM T0.5*W63(深)非合金涂塑钢带/0.5*S*CX00 50NC-FM T0.5*W83(深)非合金涂塑钢带/0.5*S*CX00 50NC-FM T0.5*W86(深)非合金涂塑钢带/0.5*S*CX00 50NC-FM T0.5*W98(深)非合金涂塑钢带/0.5*S*CX00 ALUMINIUM ALLOYS(D1V)铝锭X00 ALUMINIUM ALLOYS(RD23)铝锭X00 ALUMINUM SOLDER T-235焊锡棒X00 BALL B轴承X00 CAPACITOR电容/片式多层瓷电介质X00 CAPACITOR电容/非片式多层塑料电介质X00 CAPACITOR电容/非片式单层铝电介质X00 CERAMIC CAPACITOR电容/非片式多层瓷电介质X00 CONNECTOR接插件零件X00 DIODE二极管X00 ELECTRODE WT20 D1.6*150电极棒X00 FELT-TIP PEN K-199记号笔X00 FLUX EC-19S-8助焊剂X00 GFN3L-701改性聚苯醚胶粒X00 GREASE G747润滑油X00 GREASE UHI 64-2403润滑油X00 HALL IC EW-732半导体器件X00 HEMP STRING 16/6(8/3)麻线X00 IC SMA6010驱动元件X00 KNITTED TAPE NO341H胶带X00 LEAD ASSY组合电线X00 LOCKTITE 4211接着剂X00 M5 SCREW螺钉/杆径小于等于6毫米X00 MAGNET ASSY转动轮X00 MAGNET RESIN HM-1220KD塑磁材料X00 MAGNET RESIN TP-A27E(P2A)塑磁材料X00 MOLD RESIN 551HS聚对苯二甲酸丁二酯X00 OPERATIONAL AMPLIFIER半导体元件X00 PAINT涂料X00 PBT 3105A PBT塑胶粒X00 PBT(G15)PBT塑胶粒X00 PC BOARD电路印刷板X00 PCB电路印刷板X00 PHOTO COUPLER光电耦合器X00 POWER IC驱动元件X00 POWER IC ECN30105SP驱动元件X00 POWER IC ECN30601SP驱动元件X00 POWER IC TPD4103AK(LBR Q)驱动元件X00 PRAPASE凡士林X00 PTC THERMISTOR热敏电阻X00 PUSH MOUNT TIE导线夹X00 PVC AWG#18 1D(BLACK)套管X00 RADIATION SHEET散热片X00 RESISTOR(1.2K OHM)晶体管X00 ROTOR ASSY转动轮X00 RUBBER BAND NO.14橡皮筋X00 SARCON CASE护套X00 SC COIL线圈X00 SECC-TNA T1.2*W72电镀锌钢带/T=0.23-3.0MMX00 SILICON硅酮密封胶/克X00 SILICON GLASS TUBE D4.0套管X00 SILICON SE9186L RTV粘合剂X00 SILICON SE9187L粘合剂X00 SILICON TUBE HG-600E D3.5套管X00 SILICON TUBE HG-600E D4.0套管X00 T-DIODE二极管X00 TF FLUX助焊剂/克X00 TP温度继电器X00 TRANSISTOR晶体管（功率小于1瓦）X00 VASELINE (WHITE)凡士林X01 BAND导线夹X01 BUSHING导线固定器X01 CAPACITOR电容/非片式单层金属电介质X01 CAPACITOR电容/非片式单层铝电介质X01 CERAMIC CAPACITOR电容/片式多层瓷电介质X01 CERAMIC CAPACITOR电容/非片式多层瓷电介质X01 CERAMIC CHIP CAPACITOR电容/片式多层瓷电介质X01 CONNECTOR接插件零件X01 DIODE二极管X01 DIODE BRIDGE GBPC104L-6740二极管X01 EMI BEAD CORE滚珠芯X01 FET 2SJ360(TE12L F)晶体管（功率小于1瓦）X01 FET 2SK3342(Q)晶体管X01 H NUT螺帽X01 HALL IC DN8897半导体器件X01 M4 SCREW螺钉/杆径小于等于6毫米X01 MAGNET ASSY转动轮X01 MH5CAPACITOR(50)电容/非片式单层铝电介质X01 PCB电路印刷板X01 POST WITH BASE接插件零件X01 POWER ARRAY SMA5130(LF-1055)驱动元件X01 POWER IC驱动元件X01 ROTOR ASSEMBLY转动轮X01 ROTOR ASSY转子组件X01 RT ASSY转动轮X01 RT MOLD转子组件X01 THERMISTOR热敏电阻X01 TRANSISTOR晶体管（功率小于1瓦）X01 YXF CAPACITOR(50)电容/非片式多层铝电介质X01 YXF CAPACITOR(50)电容/非片式单层铝电介质X02 BUSHING导线固定器X02 CERAMIC CAPACITOR电容/片式多层瓷电介质X02 COVER外盖X02 EMI BEAD CORE滚珠芯X02 LEAD ASSY组合电线X02 LEAD JUMPER组合电线X02 MAGNET ASSY转动轮X02 Nd MAGNET磁铁X02 PC BOARD电路印刷板X02 PCB电路印刷板X02 POWER IC ECN30102SP-ver.2驱动元件X02 SPRING CATCHER接插件零件X02 TRANSISTOR晶体管（功率小于1瓦）X03 CAPACITOR电容/非片式单层铝电介质X03 HALL IC EW-412-PR半导体器件X03 HOLDER钢铁支架X03 MAGNET ASSY转动轮X03 PHOTO COUPLER光电耦合器X03 POST WITH BASE接插件零件X03 POWER IC ECN3018SP screening驱动元件X03 ROTOR ASSEMBLY转动轮X03 SPRING螺旋弹簧X03 TP温度继电器X05 MECHANICAL SEALS机械密封塞X07 CONDENSER电容/非片式单层塑料电介质X07 CONDENSER电容/非片式多层塑料电介质X07 BALL B轴承X08 CERAMIC CAPACITOR电容/片式多层瓷电介质X12 MAGNET ASSY转动轮X17 RESISTANCE电阻/柱式X17 RESISTOR电阻/片式。

fc302技术手册一、概述FC302是一种先进的变频器，可实现高效的电机控制，适用于各种工业应用。

该技术手册为用户提供了有关FC302的详细信息，包括产品规格、功能特点、安装和操作指南以及故障排除等内容。

二、产品规格1.输入电压范围：单相AC 100-240V，三相AC 380-480V2.输出电压范围：三相0-500V3.频率范围：0-400Hz4.额定电流范围：1.5-630A5.效率：≥98%6.保护等级：IP20三、功能特点1.高性能控制：FC302采用先进的向量控制算法，能够精确控制电机速度和扭矩，并具有优异的动态响应性。

2.多种控制模式：FC302支持多种控制方式，包括开环矢量控制、闭环矢量控制和V/F控制，能够适应不同工况的需求。

3.多种通信接口：FC302可通过内置的RS485接口和现场总线（如Modbus、Profibus、CANopen等）进行通信，实现与上位机的数据交互和远程监控。

4.多项保护功能：FC302具有过压、欠压、过载、短路等多项保护功能，可有效保护电机和变频器本身的安全运行。

5.自适应参数调整：FC302具备自适应参数调整功能，能够自动检测电机参数并进行调整，提高工作效率。

6.节能功能：FC302采用高效的PWM技术，能够减少能源消耗，降低生产成本。

四、安装指南1.安装位置：FC302应安装在通风良好、干燥、无腐蚀气体和明火的场所，远离强电磁干扰源和振动源。

2.电源接线：根据电气图进行正确的电源接线，确保供电电源与变频器匹配。

3.控制信号接线：根据需要连接控制信号接线，如运行/停止、正转/反转、模拟输入等。

4.地线接线：将变频器的PE线与地线相连，确保安全接地。

5.散热安装：FC302应与散热器进行牢固连接，确保散热效果，避免过热引起故障。

五、操作指南1.参数设置：通过编程器或上位机软件，设置变频器的工作参数，包括运行模式、速度曲线、过载保护等。

2.运行控制：通过控制端子或通信接口进行远程或本地的运行控制，包括启动/停止、正转/反转、速度调节等。

TOSHIBA Diode Silicon Epitaxial Planar Type1SS302Ultra High Speed Switching Applicationsz Small package : SC-70z Low forward voltage : V F (3) = 0.90V (typ.) z Fast reverse recovery time : t rr = 1.6ns (typ.)z Small total capacitance : C T = 0.9pF (typ.)Absolute Maximum Ratings (Ta = 25°C )Characteristic Symbol Rating UnitMaximum (peak) reverse voltage V RM 85 V Reverse voltageV R 80 V Maximum (peak) forward current I FM 300 (*) mA Average forward current I O 100 (*) mA Surge current (10ms) I FSM 2 (*) A Power dissipation P100mWJunction temperature T j 125 °CStorage temperatureT stg−55~125 °CNote: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and thesignificant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). *: Unit rating. Total rating = unit rating × 0.7Electrical Characteristics (Ta = 25°C )Characteristic SymbolTestCircuitTest ConditionMinTyp.MaxUnitV F (1)― I F = 1mA ― 0.60 ― V F (2) ― I F = 10mA ― 0.72 ― Forward voltageV F (3)― I F = 100mA ― 0.90 1.20VI R (1) ― V R = 30V ― ― 0.1Reverse current I R (2) ― V R = 80V ―― 0.5μATotal capacitance C T ― V R = 0, f = 1MHz ― 0.9 3.0 pF Reverse recovery timet rr―I F = 10mA, Fig.1― 1.6 4.0 nsJEDEC ― EIAJ SC-70TOSHIBA 1-2P1CWeight: 0.006g Unit: mmMarkingFig.1 Reverse Recovery Time(t rr ) Test CircuitRESTRICTIONS ON PRODUCT USE20070701-EN GENERAL •The information contained herein is subject to change without notice.•TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.• The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk.•The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations.• The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties.• Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations.。

CP300 THRU CP3010SINGLE-PHASE SILICON BRIDGE-P .C. MTG 2A, HEA T-SINK MTG 3AVOLTAGE - 50 to 1000 VoltsCURRENT - 3.0 AmperesRecongnized File #E111753FEATURESl Surge overload rating—50 Amperes peakl Low forward voltage drop and reverse leakage l Small size, simple installationl Plastic package has Underwriter Laboratory Flammability Classification 94V-O l Reliable low cost construction utilizing molded plastic techniqueMECHANICAL DA TATerminals: Leads solderable per MIL-STD-202, Method 208Weight: 0.08 ounce, 2.5 gramsMAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICSAt 25¢J ambient temperature unless otherwise noted; resistive or inductive load at 60Hz.CP300CP301CP302CP304CP306CP308CP3010UNITSMax Recurrent Peak Rev Voltage 501002004006008001000V Max Bridge Input Voltage RMS3570140280420560700V Max Average Rectified Output at T C =50¢J *See Fig.2 at T A =25¢J ** 3.02.0A Peak One Cycle Surge Overload Current 50A Max Forward Voltage Drop per element at 1.5A DC & 25¢J . See Fig.31.0V Max Rev Leakage at Rated DC Blocking Voltage per element at 25¢J See Fig.4 at 100¢J 10.01.0£g A m A I 2t Rating for fusing ( t<8.3ms)15.0A 2Sec Typical Junction capacitance per leg(Note 4)CJ21.0P F Typical Thermal Resistance per leg(Note 2) R £K JA (Note 3) R £K JL12.08.0¢J /W Operating Temperature Range -55 TO +125¢J Storage Temperature Range -55 TO +150¢JNOTES:1. Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer with #6 screw.2. Unit mounted on 4.0¡Ñ4.0¡Ñ0.11” thick (10.5¡Ñ10.5¡Ñ0.3cm) AL. Plate.3. Unit mounted on P .C.B at 0.375”(9.5mm) lead length with 0.5¡Ñ0.5” (12¡Ñ12mm) copper pads.4. Measured at 1 MHz and applied reverse voltage of 4.0 Volts.CP-3RATING AND CHARACTERISTIC CURVES CP300 THRU CP301024 6 10 20 40 60 100NUMBER OF CYCLES AT 60hzAMBIENT TEMPERATURE, ¢JFig. 1- NON-RECURRENT SURGE RATINGFig. 2- DERATING CURVE FOR OUTPUT RECTIFIED CURRENT54 3 2 10 0.2 0.4 0.6 0.81.0 1.2 1.4INSTANTANEOUS FWD VOLTAGE, VOLTSPERCENT OF PEAK REVERSE VOLTAGEFig. 3- T YPICAL FORWARD CHARACTERISTICS(25¢J )Fig. 4- TYPICAL REVERSE CHARACTERISTICS。

SF301 - SF30430A SUPER-FAST RECTIFIERFeatures·Case: TO-3P Molded Plastic·Terminals: Solderable per MIL-STD-202,Method 208·Mounting Position: Any ·Polarity: As marked·Approx. Weight: 5.6 gramMechanical DataMaximum Ratings and Electrical CharacteristicsCharacteristicSymbol SF301SF302SF303SF304Unit Maximum Recurrent Peak Reverse Voltage V RRM 50100150200V Maximum RMS Voltage V RSM 3570105140V Maximum DC Blocking VoltageV DC 50100150200V Maximum Average Forward Rectified Current (Total Device)@ T C = 120°C I (AV)30A Peak forward Surge Current 8.3ms half sine-wave superimposed on rated load (JEDEC Method)I FSM300A Maximum Instantaneous Forward @T J =25°C Voltage per leg at I F = 15A (Note 3)@T J = 150°CV F 0.9750.880V Maximum Instantaneous Reverse Current at @T J =25°C Rated DC Blocking Voltage per leg (Note 3)@T J = 150°C I R 10500m A Typical Junction Capacitance (Note 1)C J 80pF Maximum Reverse Recovery Time (Note 2)T rr 35ns Typical Thermal Resistance, Junction to Case R q JC 1.0°C/W Storage and Operating Temperature RangeT J,T STG-65 to +175°CNotes:(1)Measured at 1MHz and applied reverse voltage of 4.0 volts.(2)Reverse recovery test conditions: I F = +0.5A, I R = 1.0A,di/dt = 50A/m s.(3)Pulse width = 300m S, 2% duty cycle.Rating at 25°C ambient temperature unless otherwise specified.Single phase, half wave, 60Hz, resistive or inductive load.For capacitive load, derate current 20%.TO-3PDim Min Max A 3.2 3.5B4.55.4C 21.622.5D 18.921.7E 2.4 2.8G 0.550.81H15.816.2J 1.7 2.7K 3.1Ø 3.3ØL4.2 4.5M5.1 5.7N 0.89 1.5P 2.9 3.3R 11.712.8S5.06.0A BEGJ LMNP K S MHRDCCommon Cathode (no Suffix) shown Add Suffix ‘A’ for Common Anode & change ‘+’ to ‘-’ in illustration above·Plastic Package - UL Flamability Classification 94V-0·High Current Capability ·High Surge Capacity·High Fast Switching Capability < 35 ns ·Low Switching Noise and High ReliabilityI ,A V E R A G E F W D R E C T I F I E D C U R R E N T (A )A V 25507510012515005101520TEMPERATURE (°C)Fig.1,T ,Forward Current Derating CurveC 11010050100150200250300350400NUMBER OF CYCLES AT 60Hz Fig.4Peak Forward Surge CurrentI ,P E A K F W D S U R G E C U R R E N T (A )F S M 110100V ,REVERSE VOLTAGE (VOLTS)Fig.3Typical Junction CapacitanceR 101001000C ,J U N C T I O N C A P A C I T A N C E (p F )J 00.40.81.2 1.62.00.11.010100V ,INSTANTANEOUS FORWARD VOLTAGE (VOLTS)Fig.2Typical Forward CharacteristicsF I ,I N S T A N T A N E O U S F W D R E C T I F I E D C U R R E N T (A )P e r L e gF40801601202000.010.11.010V ,REVERSE VOLTAGE (VOLTS)Fig.5,Typical Reverse CharacteristicsR I ,I N S T A N T A N E O U S R E V E R S E C U R R E N T (µA )R -1.0A-0.25A+0.5A10W Non Inductive50W Non Inductive Notes:1.Rise Time =7ns max,nce =1MW 22pF2.Rise Time =10ns max Source Impedence =50W。

‎‎‎‎‎‎‎‎f c3‎0‎2说‎明书‎‎篇一：‎‎M SC‎3‎02‎-说‎明‎书 M‎S C30‎2配‎电‎隔离‎器‎功‎能向‎现场2/‎3线制‎变‎送器‎提供‎工‎作电源‎，同时采‎样变送‎器‎的‎输出‎电‎流，经‎过隔离转‎换后，‎输‎出到‎D C‎S‎或PL‎C。

‎‎也‎可用‎于4‎线‎制变送‎器，隔离‎变送器‎输‎出的‎电流‎信‎号。

‎‎型号规‎格‎及代‎码‎技‎术指标‎工作电‎源：‎‎‎24‎V‎D C±‎10% ‎功耗‎：‎‎‎≤‎2.5‎W配电‎电压：‎‎‎1‎8‎.5~‎28.5‎V配‎电‎保护‎：‎‎最‎大短路电‎流，3‎0‎m A‎输‎入‎阻抗：‎‎电流采‎样‎等效‎电阻‎≤‎100‎Ω输出‎负载：‎‎‎电‎流‎输出，‎≤350‎Ω电‎压‎输出‎，≥‎5‎kΩ ‎转换精度‎：‎‎±‎0.‎2‎%F.‎S温度‎漂移：‎‎‎±‎0‎.01‎5% F‎.S/‎℃‎安‎装方‎法‎35‎m m导轨‎卡装；‎主‎机与‎底座‎可‎以插拔‎分离绝缘‎强度：‎‎‎输‎入‎/输出‎，≥20‎17V‎A‎C（‎1m‎i‎n）‎输入/电‎源，≥‎2‎01‎7V‎A‎C（1‎m in）‎输出‎/‎电源‎，≥‎1‎000‎V AC（‎1mi‎n‎）‎绝缘‎电‎阻：‎输‎入/输‎出‎/电‎源，‎≥‎100‎MΩ（5‎00V‎D‎C）‎工‎作‎条件‎工作温度‎：‎‎0‎~5‎0‎℃存‎储温度：‎‎‎-4‎0~‎8‎5℃‎相对湿度‎：‎‎1‎0~‎9‎0%R‎H大气‎压力：‎‎‎8‎6‎~10‎6kPa‎外形‎尺‎寸图‎1‎2‎0mm‎*95m‎m*2‎3‎m m‎篇‎二‎：‎ Da‎n fo‎s‎s F‎C3‎0‎2变频‎器的使用‎Da‎n‎f o‎s s‎F‎C 3‎00变频‎器使用‎‎‎1‎.‎初始‎化：‎‎1‎4-‎22‎：‎‎ 2 ‎初始化‎‎变频‎器断‎电‎再次上‎电时参数‎初始化‎到‎默认‎值‎0‎—01‎: 1‎0语‎言‎选择‎为中‎文‎。

Part NumberDescriptionQty. IncludedM-6010-BOSS302BOSS 302 CYLINDER BLOCK 1M-6014-Z304CYLINDER HEAD STUD KIT1M-6049-Z304D7CYLINDER HEAD-SEMI FINISHED 7MM valve stem 2DRP154ROCKER ARM STUD FOR M-6049-Z304DA 16M-6566-Z304D PUSHROD GUIDE PLATES 8 PACK84705F-1Z304DA VALVE SPRING LOCATORS16795-1VALVE SPRING RETAINER FOR M-6514-BH 16NP2956EXHAUST VALVE 7MM 8NP2955INTAKE VALVE 7MM 8VS-7433VALVE SEAL 7MM1613170-1STEEL VALVE LOCKS 7MM STD IH (2=1 part)16M-6059-D351FRONT COVER1M-6250-F303HYD ROLLER CAMSHAFT1M-6303-C340SCAT FINISHED CRANKSHAFT FORGED-UNBALANCED (2)1M-6253-A50ROLLER CAM CONV. KIT1M-6268-A302TIMING CHAIN & SPROCKET SET 1M-6316-C351CRANKSHAFT DAMPER1M-6500-R302H ROLLER TAPPET SET HYD ROLLER (16)1M-6500-R302HLC HARDENED STEEL LIFTER CUP FOR M-6500-R302H (16)1M-6582-CT VALVE COVER POLISHED CT RACING SET 1M-6600-D2HIGH VOLUME OIL PUMP 1M-6605-A302OIL PUMP SHAFT HD1M-8501-F351WATER PUMP - EDELBROCK PERFORMANCE 1M-9424-D302EDELBROCK VICTOR JR INTAKE MANIFOLD 1M-6261-J351CAMSHAFT BEARINGS1M-12270-A302DISTRIBUTOR HOLDDOWN CLAMP 1388192-S SMALL BLOCK TIMING COVER DOWEL 2C3AZ-6287-B ECCENTRIC1EAD-6397-B TRANS DOWEL PUSHROD V-82F67Z-6378-AA WASHER-CRANK DAMPER ALL PUSHROD ENGINES 1F3TE-6278-AA WASHER, CAM SPROCKET 302-351W1388813-S CRANK DAMPER BOLT ALL PUSHROD ENGINES 1388448-S58MAIN CAP STUD OIL PUMP PU TUBE 1F2AE-6890-AA OIL FILTER INSERT PUSHROD ENGINES 1F1TZ-6023-A TIMING POINTER1E6DZ-6700-A SEAL ASSEMBLY-FRONT CRANK.1EOAZ-6626-B OIL PUMP GASKET1E7AZ-6A674-A OIL PAN FLANGE REINFORCEMENT 302 (L)1E7AZ-6A674-B OIL PAN FLANGE REINFORCEMENT 302 (R)1F87E-8255-CA OUTLET GASKET1F3TZ-6020-A FRONT COVER GASKET1F1SE-6701-AA SEAL - REAR MAIN SMALL BLOCK ENGINES 1Approved Aftermarket Components Required - NOT INCLUDED IN THE ENGINE KIT MFG2-1CR5400-927CONN ROD D347SR (MATCHED SET OF 8)1SCATM-6564-F351C ROLLER ROCKER 1.65:1 Ratio1Ford Racing, COMP, Crane, CrowerCB-634H (or HX)ROD BEARINGS 1Clevite MS590HXMAIN BEARING SET1Clevite SBF090030F06PISTON SET OF 8 D347SR, S347SR - Std Bore (Note 1)1Mahle T680805PUSHRODS FOR Z347/D347SR16Trend 85821MSD DISTRIBUTOR M-6007-D347SR 1MSD M-6051-CP331HEAD GASKET SET1Fel-Pro M-9439-A50INTAKE MANIFOLD GASKET 1Fel-Pro 302SB CHAMP OIL PICKUP 1Champ CP302LTCHAMP OIL PAN 1Champ -----OIL PAN GASKET 1Any COMP 26918 PAC 1218BEEHIVE VALVE SPRING16COMP or PAC(1) NOTE: .005" and .010" oversize pistons available from Mahle(2) NOTE: Rotating Assembly Will Require Balancing - 2 slugs in front and 2 slugs in rear counterweightsM-9000-347SR7KITSEALED CIRCLE TRACK ENGINE KIT。

fc302技术手册1. 概述fc302技术手册为用户提供了关于fc302产品的详细信息，包括产品功能、技术规格和使用方法等内容。

通过阅读本手册，用户能够全面了解fc302的特性和操作流程，以便正确使用该产品。

2. 产品特性fc302是一种先进的电机控制器，具有以下特性：- 高性能：fc302采用先进的控制算法和高速微处理器，能够实现精确的电机控制和运动调节功能。

- 多功能：fc302支持多种控制模式和运动配置，用户可根据具体需求进行灵活设置。

- 高可靠性：fc302具备过流、过载和短路保护功能，能够及时停止电机运行以防止损坏。

- 易于安装和使用：fc302采用用户友好的界面和操作面板，操作简单方便，无需复杂的设置和调试过程。

3. 技术规格- 电源电压：220V AC，380V AC- 控制方式：矢量控制、V/f控制- 输出频率范围：0~400Hz- 额定输出电流：根据不同型号而定，通常为5A、10A、20A等 - 输入/输出接口：RS485通信接口、模拟信号输入接口、数字输入/输出接口- 工作温度范围：-10℃~40℃- 外观尺寸：根据不同型号而定，通常为300mm×200mm×150mm4. 应用领域fc302广泛应用于各种需要电机控制的场合，包括但不限于以下领域：- 工业自动化：fc302可用于机床、卷绕机、输送机等工业自动化设备的精确控制。

- 化工领域：fc302能够控制化工设备的运行，确保生产过程的稳定性和安全性。

- 医疗设备：fc302可以应用于医疗设备中，如医用离心机、输液泵等，实现精确的运动控制。

- HVAC系统：fc302能够对暖通空调系统的各种设备进行精确控制，提高能效和舒适度。

5. 使用方法fc302的使用方法如下：- 安装：将fc302正确连接到电源和电机，并确保连接稳固可靠。

- 配置参数：通过操作面板或者RS485通信接口，设置fc302的控制模式、输出频率等参数。

二极管302的参数-概述说明以及解释1.引言1.1 概述二极管302是一种重要的电子元件，广泛应用于各种电路中。

它具有独特的电特性，能够实现电流的单向导通，因此在电子设备中起着至关重要的作用。

本文将从二极管302的基本原理、主要参数和应用领域等方面进行深入探讨，旨在帮助读者更好地了解这一电子元件的特点和用途。

1.2文章结构文章结构部分的内容：文章的结构主要包括三个部分，分别为引言、正文和结论。

引言部分将对二极管302进行概述，介绍文章的目的和意义，以及文章的结构安排。

正文部分将详细讨论二极管302的基本原理，主要参数以及在不同应用领域的具体应用情况。

结论部分将总结二极管302在电子领域的重要性，展望其未来的发展趋势，并进行一些简要的结尾总结。

1.3 目的本文的主要目的是对二极管302的参数进行深入分析和探讨，通过梳理和总结二极管302的基本原理、主要参数和应用领域，旨在帮助读者更全面地了解这一重要元器件的特性和功能。

同时，通过展望二极管302的未来发展，探讨其在电子领域的潜在应用和发展趋势，为相关领域的科研人员和工程师提供参考和启发，促进技术创新和产业进步。

通过本文的撰写，希望能够为读者提供一份系统详实的二极管302参数文献资料，并引发更多讨论和研究，推动二极管302在电子技术领域的发展和应用。

2.正文2.1 二极管302的基本原理二极管302是一种常见的二极管器件，其基本原理是利用PN结的特性实现电流的单向导通。

PN结是由P型半导体和N型半导体直接接触形成的结构，它具有正向导通和反向截止的特性。

在二极管302中，当正向电压施加到PN结上时，由于P型半导体中的空穴和N型半导体中的电子向PN结扩散，使得PN结中的电子和空穴重新组合，从而形成导电通道，使电流通过。

这种状态下，二极管被认为处于导通状态。

相反，当反向电压施加到PN结上时，空穴和电子被吸引到PN结的两侧，形成耗尽层，使得PN结中不再有自由载流子可以导电，此时电流无法通过，二极管处于截止状态。

交错并联式PFC控制板CBB-830/NPF-2001硬件详细设计说明书< V 1.0>文档编号：修订历史记录目录1.说明 (4)1.1.目的 (4)1.2.适用范围 (4)1.3.术语 (4)1.4.参考资料 (4)2.概述 (4)2.1.PFC原理及芯片介绍 (4)2.1.1 PFC芯片控制原理 (4)2.1.2 PFC芯片引脚介绍 (6)2.2.原理框图 (7)3.单元设计 (7)3.1.电压采样电路 (7)3.2.电流采样电路 (10)3.3.输入欠压保护........................................................................................ 错误!未定义书签。

3.4.PFC接口 (13)3.5.L AYOUT布局注意 (13)4.电源和接地 (14)4.1.电源 (14)4.2.接地 (14)5.散热 (14)6.安装固定 (14)6.1.安装固定方式说明 (14)6.2.外形尺寸 (14)6.3.固定 (14)6.4.接插件、端子位置 (14)7.成本计算 (15)8.技术难点 (16)9.附录 (16)1.说明1.1.目的本文档为模块交错并联式PFC控制项目的硬件详细设计说明书，它在概要设计说明书的基础上，对交错并联式PFC控制板进行了实现层面上的要求和说明。

1.2.适用范围该文档为研究组的设计文档，只提供给研发部内部成员。

1.3.术语1.4.参考资料(一)《UCC28070 datasheet .PDF》(二)《UCC28070应用手册.PDF》2.概述模块通用交错并联式PFC控制板为交错并联式Boost电路提供控制信号，使Boost输出电压稳定在400V。

模块通用交错并联式PFC控制板由三大部分组成，包括输入输出电压采样，两路电流采样、两路驱动电路。

2.1.PFC原理及芯片介绍2.1.1 交错并联式PFC芯片控制原理交错并联式PFC控制器的PWM控制由德州仪器（TI）的16引脚的Interleaving CCM PFC控制芯片UCC28070实现。

Shop on line at ®--l'EDMEGA"-­ e-mail:**************For latest product manuals DP302-P Digital Panel Meter for Process Signal InputsRoHS 2 Compliant(•] ..__--.t'EOMEGA® ...... _-,.OMEGAnet® On-Line Service Internet e-mail **************USA:ISO 9001_Certified Canada:Servicing North America:One Omega Drive, P.O. Box 4047Stamford CT 06907-0047TEL: (203) 359-1660 FAX: (203) 359-7700 e-mail:**************976 BergarLaval (Quebec) H7L SA 1TEL: (514) 856-6928 FAX: (514) 856-6886 e-mail:*************For immediate technical or application assistance:USA and Canada:Mexico and Latin American:Benelux:Czech Republic:France: Germany/Austria:United Kingdom: ISO 9002 Certified Sales Service: 1-800-826-6342 / 1-800-TC-OMEGA® Customer Service: 1-800-622-2378 / 1-800-622-BEST® Engineering Service: 1-800-872-9436 / 1-800-USA-WHEN®TEL: (001)800-TC-OMEGA® FAX: (001) 203-359-7807 En Espanol: (001) 203-359-7803e-mail:*****************Servicing Europe:Postbus 8034, 1180 LAAmstelveen, The Netherlands TEL: +31203472121 FAX: +31206434643 Toll Free in Benelux: 0800 0993344e-mail:*****************Frystatska 184, 733 01 KarvinaTEL: +420 59 6311899 FAX: +420 59 6311114 e-mail:*****************11, rue Jacques Cartier, 78280 GuyancourtTEL: +33 1 61 37 29 00 FAX: +33 1 30 57 54 27Toll Free in France: 0800 466 342e-mail:**************Daimlerstrasse 26, D-75392 Deckenpfronn, Germany TEL: +49 7056 9398-0 FAX: +49 7056 9398-29 TollFreeinGermany************e-mail:*************One Omega DriveRiver Bend Technology CentreNorthbank, lrlam Manchester M44 SBD United Kingdom TEL: +44 161 777 6611 FAX: +44 161 777 6622Toll Free in England: 0800 488 488e-mail:**************.ukIt is the policy of OMEGA to comply with all worldwide safety and EMC/EM I regulations that apply.OMEGA is constantly pursuing certification of its products to the European New Approach Directives. OMEGA will add the mark to every appropriate device upon certification.The information contained in this document is believed to be correct but OMEGA Engineering, Inc. accepts no liability for any errors it contains, and reserves the right to alter specifications without notice.WARNING: These products are not designed for use in, and should not be used for, pa tient connected applications.I.\ This device is marked with the interna tiona l ha za rd symbol. It is importa nt to read the Setup Guide before insta lling or ill commissioning this device a s it contains importa nt information relating to safety and EMC.。

• U niversal two-wire hose design manufactured to international specifications (ISO 1436-1 Type 2SN)• I ncreased working pressures for improved reliability and expanded applications• N itrile inner tube for greater fluid compatibility and bio-oil resistanceParker Hannifin Corporation Hose Products Division – U.S. Hose Products Division – Europe 30240 Lakeland Blvd. Via GB Pirelli, 6Wickliffe, Ohio 44092 22070 Veniano (CO), Italy Phone: (440) 943-5700 Phone: (39) 031-936111Fax: (440) 943-3129 Fax: (39) 031-936664www.parker .com/euro_hpdBulletin 4480-B114-US 7.5M 11/05 ©2005 Parker Hannifin CorporationThe 302/301 advantage: seamless application coverage and leak-free performance, anywhere and everywhere.The world standard in hose is now worldwide. Introducing Parker’s 302/301 hose – a new universal two-wire construction hose designed to accommodate globalcustomer requirements. Manufactured to strict international quality specifications, Parker 302/301 offers customers consistency of performance combined with improved availability anywhere in the world.Designed to replace the existing 301 hose series, as well as its European counterpart, 301SN, Parker 302/301 offers higher working pressure, longer service life and better fluid compatibility.Features and benefits• H igher working pressures than the Parker 301 series for improved reliability and expanded applications • N itrile inner tube for better fluid compatibility with a larger array of hydraulic fluids, including biodegradable ones • M eets ISO 1436-1 Type 2SN, SAE 100R2 Type AT, and EN 853 Type 2SN • R ated at a 4:1 burst pressureConstructionInner tube: Nitrile rubberReinforcement: Two braids steel wire Cover: Synthetic rubberTemperature• P etroleum-based hydraulic fluids of -40°F to +212°F (-40°C to +100°C)• W ater, water/oil emulsion and water/glycol up to +185°F (+85°C)• Air up to +158°F (+70°C)Applications• A utomotive plant applications • F orestry equipment • Agricultural equipment• Construction equipment。