博朗190s-1, 170s-1剃须刀说明书中文版

S7887/55shave, advanced skin protectionwith SkinIQ T echnologyThe Philips Series 7000 glides smoothly over your skin, while cutting each hairclose - even on 3-day beards. Equipped with advanced SkinIQ technology, theshaver senses, adapts and guides on the correct motion, for better skinprotection.A close shavePowerful performance in every passEngineered for precision and cutting efficiencyA djusts to your facial contour for optimal skin contactSkinIQ technologyReduces friction on skin to minimize irritationA djusts to your beard for effortless shavingEnhanced shaving experience with appGuides you to an improved technique with fewer passesFor a convenient shaveDeep cleaning in just 1 minute for hygienic shavingShave wet, dry and even under the showerPrecision trimmer integrated in the handleSustainabilityConvenient chargingHighlightsNano SkinGlidecoatingA protective coating lies between the shaver heads and your skin . Made of up to 250.000micro -tech beads per square centimetre ,improves gliding on skin by up to 30%***, to minimize irritation .SteelPrecisionbladesWith up to 90.000 cutting actions per minute , the SteelPrecision blades shave close , cutting more hair per stroke *. The 45high -performance blades are self -sharpening and made in Europe .Motion ControlsensorMotion -sensing technology tracks how you shave and guides you to a more e fficient technique . A fter just three shaves , the majority of men achieved a better shaving technique for fewer passes ***.Personalization viaappPerfect your shave by pairing your shaver with the Philips GroomTribe app . Shave by shave , track the progress of your skin ,personalize your shave and master your technique for a shave that 's as close as it is kind to skin .Power A daptsensorThe intelligent facial -hair sensor reads hair density 250 times per second . The technology dynamically auto -adapts cutting power for an e ffortless and gentle shave .360-D FlexingheadsFully flexible heads turn 360° to follow your facial contours . Experience optimal skin contact for a thorough and comfortable shave .Hair -Guide PrecisionheadsThe new shape of the shaving heads is engineered for precision . The surface is enhanced with hair guiding channels ,designed to move hair into an e ffective cutting position .Cable -free Quick CleanPodPowerful cleaning pod thoroughly cleans and lubricates your shaver in just 1 minute ,keeping it performing at its best for longer .The pod is 10x more e ffective than cleaning with water **. It is the world 's smallestcleaning pod , so you can store it easily and use it anywhere .Wet &DryA dapt your shaving routine to your needs .With Wet & Dry , you can go for a comfortable dry shave or a refreshing wet shave . Y ou can shave with gel or foam even under the shower .SpecificationsA ccessoriesCharging standQuick Clean Pod: Y es, 1 cartridge included Integrated pop-up trimmerTravel and storage: Travel caseUSB-A cable included: Power adapter not includedSoftwareA pp: Daily Care, Connects via Bluetooth®Smartphone compatibility: iPhone andA ndroid™ devicesPowerCharging: 1 hour full charge, 5 min quick chargeRun time: 60 minutes A utomatic voltage: 5 VBattery type: Li-ionStand-by power: 0.04 WMax power consumption: 5 WVoltage: 5 VDesignHandle: Rubber gripColor: Dark ChromeShaving heads: A ngularService2-year warrantyReplacement head SH71: Replace every 2 yrswith SH71Shaving PerformanceShaving system: SteelPrecision bladesContour following: 360-D Flexing headsSkinIQ technology: Nano SkinGlide Coating,Motion Control sensor, Power A dapt sensorEase of useDisplay: LED display, Battery level indicator,Motion control indicator, Travel lockWet & Dry: Wet and dry useCleaning: One-touch open, Fully washableCharging: USB-A Charging* compared to non-coated material* *Tested versus Philips Series 3000.* **Based on Philips Series S7000 and Daily Care appusers in 2019* ***comparing shaving debris after using cleaning fluidvs. water in the cartridge© 2023 Koninklijke Philips N.V.A ll Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Issue date 2023‑07‑15 Version: 7.7.1E A N: 87 20689 00869 3 。

[剃须刀使用说明书范文]博朗剃须刀使用说明书范文本说明适用于各类充电式剃须刀。

充电：将电源插头插入AC220V电源之中，视充电指示灯亮、充电12-16小时。

注意：充电时间不要过长，以免影响电池寿命。

剃须：将开关键上推至(on)开启位置，即可剃须。

为求最佳之刮须效果，请将皮肤拉紧，使胡子成直立状，然后以逆胡子生长的方向缓慢移动。

修剪刀：如有修剪刀功能的剃须刀，请在剃须前，先将修剪刀推出，修短胡须后再用网刀剃净。

清洁：剃须刀要经常清洁。

清洁前应先关上开关。

旋下网刀，用毛刷将胡须屑刷净。

清洁后轻轻放回刀头架、且到位。

清洁时应轻拿轻放，避免损坏任何部件。

保修条例：保修服务只限于一般正常使用下有效。

一切人为损坏例如接入不适当电源，使用不适当配件，不依说明书使用；因运输及其它意外而造成之损坏；非经本公司认可的维修和改造，错误使用或疏忽而造成损坏；不适当之安装等，保修服务立即失效。

此保修服务并不包括运输费及维修人员上门服务费。

保修期外享受终身维修，维修仅收元器件成本费。

剃须刀中内、外刃属消耗品不在保修范围内。

保修期：正常使用六个月。

注意事项：充电时间12～16小时。

换刀网刀头时一定要选用原厂配件。

评析：这是一篇剃须刀的使用说明书。

该使用说明书还附上了“保修条例”部分，严格来讲，“保修条例”不属于使用范围内的东西，可以略去。

就其使用说明来讲，该文谈到三个主要的步骤，一是充电，二是剃须，三是清洁。

这类剃须刀属于充电式的，由于刚打开的产品尚未充电，故要求先充电。

该部分介绍了所接用的充电电压，充电时间及注意事项等。

剃须部分将剃须的具体方法，剃刀走动的方向等都介绍的很清楚。

除此而外，还指出有“修剪刀”的剃刀可在剃须前先将长须修短，再用剃须刀剃净。

清洁是剃须后必做的，这里详细地了剃须刀的保养清洁工作。

为延长剃须刀的寿命这都是很有必要的。

()614s h 19EngliBraun GmbHFrankfurter Straße 145 61476 Kronberg/Germany 96620210/X-13China/Korea/UKSer ies 5S e ri e s 511b5090cc112EnglishOur products are designed to meet the highest standards of quality, functionality and design. Thank you for your trust in Braun’s quality and we hope you enjoy your new Braun shaver.Please read the use instructions carefully and completely before using the appliance.Keep them for future reference.WarningYour appliance is provided with a special cord set, which has an integrated Safety Extra Low Voltage power supply. Do not exchange or tamper with any part of it, otherwise there is risk of an electric shock.Only use the special cord set provided with your appliance.Do not shave with a damaged foil or cord.The shaver is suitable forcleaning under running tabwater. Detach the shaver fromthe power supply before clean-ing it in water.Model 5040s w&d only:This appliance is suitable forcleaning under running waterand use in a bath or shower. Forsafety reasons it can only beoperated cordlessly.This appliance can be used by children aged from 8 years and above and per-sons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the safe use of the appliance and under-stand the hazards involved.Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 8 years and supervised.Oil bottle(models 5040s w&d/5030s/5020s) Keep out of reach of children. Do not swallow. Do not apply to eyes. Dispose of properly when empty.Clean&Charge Station(models 5090cc/5070cc/5050cc) To prevent the cleaning fluid from leaking, ensure that the Clean&Charge Station is placed on a flat surface. When a cleaning cartridge is installed, do not tip, move suddenly or transport the station in any way as cleaning fluid might spill out of the cartridge. Do not place the station inside a mirror cabinet, nor place it on a polished or lacquered surface.The cleaning cartridge contains a highly flammable liquid so keep it away from sources of ignition. Do not expose to direct sunlight and cigarette smoking nor store it over a radiator.Do not refill the cartridge and use only original Braun refill cartridges.1 Foil & Cutter cassette2 Cassette release button3 MultiHeadL ock switch4 On/off switch5 Shaver display6 Long hair trimmer7 Shaver-to-station contacts8a Release button for long hair trimmer8b Model number of shaver9 Shaver power socket10 Special cord set11a Brush11b Hard travel case*11c Protection cap**not with all modelsPrior to first use remove the protection foil if any from the shaver display and connect the shaver to an electrical outlet using the special cord set (10). Charging and basic operating information• A full charge provides up to 45 minutes of cordlessshaving time. This may vary according to your beard growth and environmental temperature.• Recommended ambient temperature for charging is 5 °C to 35 °C. The battery may not charge properly or at all under extreme low or high temperatures. Recommended ambient temperature for shaving is 15 °C to 35 °C.• Do not expose the appliance to temperatures higher than 50 °C for extended periods of time.• When the shaver will be connected to an electrical outlet, it may take some minutes until the display illuminates.Charge statusThe shaver display (5) shows the charge status of the battery.During charging: The battery symbol will blink. (5090cc: The respective battery segment will blink.) Fully charged (shaver is connected to an electrical outlet): The battery symbol will light up for a few seconds. (5090cc: All battery symbols will light up for a few seconds.)Low chargeThe low-charge light flashes red when the battery is running low. You should be able to finish your shave. With switching off the shaver a beep sound reminds of the low charge status.Cleaning status(models 5090cc/5070cc/5050cc only)Travel lockThe lock symbol lights up when the shaver has been locked to avoid unintended starting of the motor (e.g. for storing it in a suitcase).Press the on/off switch (4) to operate the shaver. Tips for a perfect dry shaveFor best results, Braun recommends you to follow 3 simple steps:1. Always shave before washing your face.2. At all times, hold the shaver at the right angle(90°) to your skin.3. Stretch your skin and shave against the directionof your beard growth.MultiHeadLock switch (head lock)To shave hard-to-reach areas (e.g. under the nose) slide the MultiHeadLock switch (3) down to lock the shaver head. The shaver head can be locked in five positions. To change position, move the shaver head with your thumb and forefinger back or forth. It will automatically click into the next position.To set it back into the pivoting position the MultiHeadLock switch needs to be slid up again. Models 5090cc/5070cc/5050cc: For automatic cleaning in the Clean&Charge Station the head lock should be released.Long hair trimmerTo trim sideburns, moustache or beard press the release button (8a) and slide the long hair trimmer (6) upwards.Shaving with the cord (models 5090cc/5070cc/ 5050cc/5030s/5020s only)If the shaver has run out of power (discharged), you may also shave with the shaver connected to an electrical outlet via the special cord set.Travel lock• A ctivation: By pressing the on/off switch (4) for3 seconds the shaver is locked. This is confirmed by a beep sound and the lock symbol in the display. Afterwards the display turns off.• D eactivation: By pressing the on/off switch for3 seconds the shaver is unlocked again.• S witch the shaver on (cordless) and rinse the shaver head under hot running water until all residues have been removed. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.• N ext, switch off the shaver, press the release button (2) to remove the Foil & Cutter cassette (1) and let it dry.• I f you regularly clean the shaver under water, then once a week apply a drop of light machine oil on top of the Foil & Cutter cassette.Alternatively, you may clean the shaver with a brush:• S witch off the shaver. Remove the Foil & Cutter cassette (1) and tap it out on a flat surface. Using the brush, clean the inner area of the pivoting head. Do not clean the cassette with the brush as this may damage it!Model 5040s only:The shaver should be cleaned after each foam usage.The Clean&Charge Station has been developed for cleaning, charging, lubricating, disinfecting and storing your Braun shaver.12 Station power socket13 Lift button for cartridge exchange14 Station-to-shaver contacts15 Clean&Charge Station display15a Status light16 Start button17 Cleaning cartridgeInstalling the Clean&Charge Station (see fig. D)• Remove the protection foil from the Clean&Charge Station display.• Using the special cord set (10), connect the station power socket (12) to an electrical outlet. • Press the lift button (13) at the rear side of the Clean&Charge Station to lift up the housing.• Hold the cleaning cartridge (17) down on a flat, stable surface (e.g. table).• Carefully remove the lid from the cartridge.• Slide the cartridge from the rear side into the base of the station until it snaps into place.• Slowly close the housing by pushing it down until it locks.Charging the shaver in the Clean&Charge Station (see fig. D)Insert the shaver head down into the cleaning station. Important: The shaver needs to be dry and free from any foam or soap residue!The contacts (7) on the back of the shaver need to align with the contacts (14) in the station. Push the shaver in the correct position.A beep sound confirms that the shaver sits properly in the station. Charging will start automatically. Model 5090cc: The Clean&Charge Station analyzes«Cleaning programs» below.Cleaning the shaver(see fig. D)Station, upside down and with the front showing (with released head lock/contact alignment/beep sound). Cleaning programs5090cc: The hygiene status will be analyzed and oneshort economical cleaningnormal level of cleaninghigh intensive cleaning5070cc/5050cc: One standard cleaning program included.Start automatic cleaningStart the cleaning process by pressing the start button (16). If status light (15a) does not shine (Clean&Charge Station switches to stand-by after ca. 10 minutes), press start button twice. Otherwise cleaning will not start. For best shaving results, we recommend cleaning after each shave.Each cleaning program consists of several cycles, where cleaning fluid is flushed through the shaver head. Depending on your Clean&Charge Station model and/or program selected, the cleaning time takes up to 3 minutes. During this time the status light blinks. Leave the shaver in the station for drying.It takes several hours until remaining moisture evaporates depending on the climatic conditions. Afterwards the shaver is ready for use.After completing the cleaning and charging proce-dure, all indicators turn off.Removing the shaver from the Clean&Charge Station (see fig. E)Hold the Clean&Charge Station with one hand and tilt the shaver slightly to the front to release it. Cleaning Cartridge / Replacement (see fig. F) When the level indicator lights up permanently red, the remaining fluid in the cartridge is sufficient for about 3 more cycles. When the level indicator blinks red, the cartridge needs to be replaced - (about every 4 weeks when used daily.)After having pressed the lift button (13) to open the housing, wait for a few seconds before removingthe used cartridge to avoid any dripping. Before discarding the used cartridge, make sure to close the openings using the lid of the new cartridge, since the used cartridge will contain contaminated cleaning solution.The hygienic cleaning cartridge contains ethanol, which once opened will naturally evaporate slowly into the surrounding air. Each cartridge, if not used daily, should be replaced after approximately8 weeks to ensure optimal disinfection.The cleaning cartridge also contains lubricants for the shaving system, which may leave residual marks on the outer foil frame and the cleaning chamberof the Clean&Charge Station. These marks can be removed easily by wiping gently with a damp cloth. Braun recommends changing your shaver’sFoil & Cutter cassette every 18 months to maintain your shaver’s maximum performance.Available at your dealer or Braun Service Centres:• Foil & Cutter cassette: 52S/52B• Cleaning cartridge Clean&Charge Station: CCR •Braun Shaver cleaner spray21This product contains rechargeable batteries.In the interest of protecting the environment, please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.The cleaning cartridge can be disposed of with regular household waste.Subject to change without notice.For electric specifications, see printing on thespecial cord set.22。

SW3700English 6简体中文 19IntroductionCongratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at/welcome .Please read this user manual, as it contains information about the features of this shaver as well as some tips to make shaving easier and more enjoyable.General description (Fig. 1)1Protective cap2Shaving unit3Shaving unit release button4On/off button5Charging light6Socket for small plug7Trimmer8Trimmer release slide switch9Supply unit10Small plugImportant safety informationRead this important information carefully before you use the appliance and its accessories and save it for future reference. The accessories supplied may vary for different products.Danger-Keep the supply unit dry.6EnglishWarning-To charge the battery, only use the detachable supply unit (HQ850) provided with the appliance.-The supply unit contains a transformer. Do not cut off the supply unit to replace it with another plug, as this causes a hazardous situation.-This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.-Always unplug the shaver before you clean it under the tap.-Always check the appliance before you use it.Do not use the appliance if it is damaged, as this may cause injury. Always replace a damaged part with one of the original type.-Do not open the appliance to replace the rechargeable battery.Caution -Never immerse the cleaning system or the charging stand in water and do not rinse it under the tap.-Never immerse the shaver in water. Do not use the shaver in the bath or in the shower.-Never use water hotter than 60°C to rinse the shaver.-Only use this appliance for its intended purpose as shown in the user manual.-For hygienic reasons, the appliance should only be used by one person.7English-Never use compressed air, scouring pads,abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean theappliance.-If your shaver comes with a cleaning system,always use the original Philips cleaning fluid (cartridge or bottle, depending on the type of cleaning system).-Always place the cleaning system on a stable,level and horizontal surface to prevent leakage.-If your cleaning system uses a cleaning cartridge, always make sure the cartridge compartment is closed before you use the cleaning system to clean or charge the shaver.-When the cleaning system is ready for use, do not move it to prevent leakage of cleaning fluid.-Water may drip from the socket at the bottom of the shaver when you rinse it. This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the shaver.-Do not use the supply unit in or near wallsockets that contain an electric air freshener to prevent irreparable damage to the supply unit.Electromagnetic fields (EMF)-This Philips appliance complies with allapplicable standards and regulations regarding exposure to electromagnetic fields.General-This shaver can be safely cleaned under the tap.-The supply unit is suitable for mains voltages ranging from 100 to 240 volts.-The supply unit transforms 100-240 volts to a safe low voltage of less than 24 volts.8EnglishChargingCharge the shaver before you use it for the firsttime and when the display indicates that thebattery is almost empty.Charging takes approx. 8 hours. A fully chargedshaver has a shaving time of up to 40 minutes.Note: You cannot use the shaver while it ischarging.Note: Depending on your shaving/styling behaviorand beard type, the operating time may vary overtime.Charging with the supply unit1Make sure the shaver is switched off.2Put the small plug in the shaver and put thesupply unit in the wall socket.-The charging light on the shaver indicates thecharging status (see 'Charge indications').3After charging, remove the supply unit from thewall socket and pull the small plug out of theshaver.Charge indicationsWhen the battery is almost empty, the charging light starts to flash red.When you switch off the shaver, the charging light continues to flash red for a few seconds.9EnglishWhen the shaver is charging, the charging light flashes green.When the battery is fully charged, the charging light lights up green continuously.Note: After approx. 30 minutes, the charging light goes out to save energy.rinsed under running tap water.-Use this shaver for its intended household use as described in this manual.-For hygienic reasons, the shaver should only be used by one person.-Trimming is easier when the skin and hair are dry.Note: This shaver can only be used without a cord.Skin adaptation period Your first shaves may not bring you the result you expect and your skin may even become slightly irritated. This is normal. Your skin and beard needtime to adapt to any new shaving system. To allow your skin to adapt to this new appliance, we advise you to shave regularly (at least 3 times a week) and exclusively with this appliance for a period of 3weeks.For the best results on skin comfort, pre-trim your beard if you have not shaved for 3 days or longer.When you press the on/off button for the very first time, the charging light flashes in an irregular pattern.Charge the shaver before use.1To switch the shaver on or off, press the on/off button once.1Switch the shaver on.2Move the shaving heads over your skin in both straight and circular movements to catch all hairs growing in different directions. Exertgentle pressure for a close comfortable shave.Note: Do not press too hard, this can cause skin irritation.3Switch off and clean the shaver after each use.4Put the protective cap on the shaver to protect shaving heads.11EnglishUsing the trimmerYou can use the trimmer to groom your sideburns and moustache.1Push the trimmer release slide switch downwards to open the trimmer.2Switch the shaver on.3Hold the trimmer perpendicular to the skin and move it downwards while exerting gentle pressure.4Switch off and clean the trimmer after each use.5Close the trimmer (‘click’).-Regular cleaning guarantees better shaving results.-Never clean, remove or replace the shaving unit while the shaver is switched on.-Do not apply pressure to shaving head combs.-Do not touch shaving heads with hard objects as this may dent or damage the precision-made slotted combs.-Do not use abrasives, scourers or aggressive liquids such as gasoline or acetone to clean the shaver.12EnglishCleaning the shaver under the tapClean the shaver after every shave for optimal2Rinse the shaving unit under a warm tap.3Press the unit release button to open the shaving unit.4Rinse the shaving unit and hair chamber undera warm tap.5Carefully shake off excess water and let the shaver air dry.6Close the shaving unit.Clean the trimmer after each use.1Switch the shaver off.13English2Push the trimmer release slide switch down to open the trimmer.3Switch the shaver on and rinse the trimmer under the tap.4Switch the shaver off after cleaning.5Carefully shake off excess water and let the trimmer air dry.6Close the trimmer (‘click’).Tip: For optimal performance, lubricate the teeth of the attachment with a drop of sewing machine oil regularly.For maximum shaving performance, we advise you to replace the shaving heads every two years.Replace damaged shaving heads immediately.Always replace the shaving heads with original Philips shaving heads.1Switch the shaver off and disconnect it from the wall socket.Press the shaving unit release button to open the shaving unit. Pull the shaving unit off the shaver.14EnglishPut the protective cap on the shaver to preventdamage.Note: Always let the shaver dry completely beforestoring.To buy accessories or spare parts, visit/service or go to yourPhilips dealer. You can also contact the PhilipsConsumer Care Center in your country (see theinternational warranty leaflet for contact details).The following accessories and spare parts areavailable:-SH30 Philips Shaving Heads.-HQ110 Philips shaving head cleaning spray Recycling-Do not throw away the product with the normalhousehold waste at the end of its life, but handit in at an official collection point for recycling.By doing this, you help to preserve theenvironment.-This product contains a built-in rechargeablebattery which shall not be disposed of withnormal household waste. We strongly adviseyou to take your product to an official collectionpoint or a Philips service centre to have aprofessional remove the rechargeable battery.-Follow your country’s rules for the separatecollection of electrical and electronic productsand rechargeable batteries. Correct disposalhelps prevent negative consequences for theenvironment and human health.16EnglishRemoving the rechargeable batteryshaver or in the hair chamber. If so, remove them.2Remove the outer panels of the shaver with a screwdriver or other tool. If necessary, alsoremove additional screws and/or parts until you see the printed circuit board with therechargeable battery.3Remove the rechargeable battery.Warranty and supportIf you need information or support, please visit /support or read theinternational warranty leaflet.Warranty restrictionsThe shaving heads (cutters and guards) are not covered by the terms of the international warranty because they are subject to wear.TroubleshootingThis chapter summarizes the most commonproblems you could encounter with the appliance.If you are unable to solve the problem with the information below, visit/support17Englishfor a list of frequently asked questions or contact the Consumer Care Center in your country.Problem Possible cause Solution The appliance do es not shave as well as it used to.The shaving heads are damaged or worn.Replace the shaving heads.Long hairs obstruct the shaving heads.Clean the shaving heads one by one.You have not inserted the shaving heads properly.Make sure that the projections of the shaving heads fit exactly into the recesses.The appliance does not work when I press the on/off button.The rechargeable battery is empty.Recharge the battery.The temperature of the appliance is too high. In this case,the appliance does not work.As soon as thetemperature of the appliance has dropped sufficiently, you can switchon the appliance again.18English介绍感谢您的惠顾，欢迎光临飞利浦！ 为了让您能充分享受飞利浦提供的支持，请在 /welcome 上注册您的产品。

Series1Series 1190s-1612 English 16Braun GmbH Frankfurter Straße 145 61476 Kronberg/Germany Our products are designed to meet the highest standards of quality, functionality and design. We hope you entirely enjoy your new Braun shaver.WarningYour shaver is provided with a special cord set with integrated Safety Extra Low Voltage power supply. Do not exchange or manipulate any part of it. Otherwise there is a risk of electric shock.Never use the appliance with a damaged foil or cord.This appliance is not intended for use by children or persons with reduced physical or mental capabilities, unless they are given supervision by a person responsible for their safety. In general, we recommend that you keep the appliance out of reach of children. Children should be supervised to ensure that they do not play with the appliance.Oil bottleKeep out of reach of children. Do not swallow. Dispose of properly when empty.Description1 Foil protection cap2 Shaver foil3 Cutter block4 Long hair trimmer5 Charging light (190s only)6 On/off switch7 Special cord setCharging (190s only)The best environmental temperature for charging is between 15 °Cand 35 °C.• Using the special cord set, connect the shaver to an electrical outlet with the motor switched off.• When charging for the first time, leave the shaver to charge continuously for 4 hours. The charging light (5) shows that the shaver is being charged. When the battery is fully charged, the charging light intermit-tently blinks on and off. This indicates that the battery maintains its full English• Once the shaver is completely charged, discharge the shaver through normal use. Then recharge to full capacity. Subsequent charges will take about 1 hour.• Maximum battery capacity will only be reached after several charging/ discharging cycles.• If the rechargeable batteries are discharged, you may also shave by connecting the shaver to an electrical outlet via the special cord set.ShavingRemove the foil protection cap (1). Activate the on/off switch (6). The floating foil frame automatically adapts to your skin surface for a close, smooth shave.For pre-shaving after a few days of not having shaved, use the long hair trimmer (4) to pre-cut long hairs. For a close, smooth shave, finish with the foil.TrimmingPush out the long hair trimmer (a). It allows controlled trimming of moustache and sideburns. It evenly cuts and trims larger areas: ideal for shaping sideburns, moustaches and partial short beards.Frequent use of the long hair trimmer may reduce the battery capacity (190s only).Tips for the perfect shave• We recommend that you shave before washing, as the skin tends to be slightly swollen after washing.• Hold the shaver at right angles (90°) to the skin. Stretch the skin andshave against the direction of beard growth.• To maintain 100% shaving performance, replace your foil and cutterblock at least every 18 months or when worn.CleaningThe shaver head is suitable for cleaning under running tap water.Warning: Detach the shaver from the power supply before cleaningthe shaver head in water.• Model 190s only: Switch the shaver on and rinse the shaver head under hot running water.• You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds.• Next, (model 190s: switch off the shaver) remove the shaver foil (2) and cutter block (3). Then leave the disassembled shaving parts to dry. Alternatively, you may clean the shaver using the brush provided (c):• Switch off the shaver. Remove the shaver foil.• Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this may damage the foil.Keeping your shaver in top shapeAbout every four weeks, clean the cutter block with Braun cleaning agents. Put a drop of light machine oil onto the long hair trimmer and the shaverfoil (d).Replacing the shaving partsTo maintain 100% shaving performance, replace your foil and cutter blockat least every 18 months or when worn. Change both parts at the same time for a closer shave with less skin irritation.(Shaver foil and cutter block: 10B)Preserving the batteries (190s only)In order to maintain the optimum capacity of the rechargeable batteries, the shaver has to be fully discharged (by shaving) every 6 months approximately. Then recharge the shaver to full capacity. Do not expose the shaver to temperatures higher than 50 °C for extended periods of time.Environmental noticeThis product contains rechargeable batteries. In the interest ofprotecting the environment, please do not dispose of the product inthe household waste at the end of its useful life. Disposal can takeplace at a Braun Service Centre or at appropriate collection points provided in your country.。

电动刮胡刀使用说明使用电动刮胡刀前，请务必阅读以下说明以确保正确的使用方法，并获得最佳刮胡体验。

一、前言电动刮胡刀是一种方便快捷的刮胡工具，它能够提供干净、舒适的剃须效果。

本使用说明将为您介绍刮胡刀的基本组件、操作方法以及注意事项。

二、刮胡刀构造1. 刮刀头：刮刀头是用来剃须的主要部分。

请注意保持刮刀头的清洁，避免积聚细菌。

2. 电源开关：刮胡刀通常配有一个电源开关，用来控制刀头的旋转。

3. 充电插头：电动刮胡刀通常通过充电器进行充电，充电插头是与充电器插座相连接的部分。

三、使用方法1. 准备工作a. 确保刮胡刀已经充电完毕。

请根据所配充电器的说明进行充电，一般需要约1-2小时。

b. 清洁刮刀头，确保其表面没有残留物，并保持干燥。

2. 使用步骤a. 打开刮胡刀的电源开关，确保刮刀头旋转。

b. 用右手握住刮胡刀的手柄，将刮刀头轻轻贴近脸部的皮肤。

c. 沿着胡须生长的方向，轻轻地将刮刀头从上至下或者从下至上刮动。

避免用力过猛，以免造成皮肤刺激或伤口。

d. 在刮胡的过程中，可以用左手拉紧皮肤以提供更平滑的刮剃体验。

e. 刮胡完成后，关闭电源开关。

四、注意事项1. 刮胡前应将脸部清洁干净，使用洗面奶或者热毛巾敷脸能够软化胡须，减少刮胡时的不适感。

2. 刮胡刀仅适用于脸部和颈部的剃须，不可用于其他部位的剃毛。

3. 刮胡刀使用过程中应避免与水直接接触，以防水分进入电机造成损坏。

4. 保持刀头的清洁，并定期更换刮刀头，以保证刮胡效果和卫生安全。

5. 如果您对刮胡刀刀头的清洁和更换有任何疑问，请参照刮胡刀的说明书或者咨询专业人士。

五、总结电动刮胡刀是一种现代化的剃须工具，使用方便，刮胡效果出色。

在使用刮胡刀时，请确保按照正确的步骤进行操作，并保持刮刀头的清洁和更换。

祝您拥有一个清爽的剃须体验！以上就是电动刮胡刀的使用说明。

希望本文对您有所帮助，如果您还有其他问题或需要更多信息，请参考刮胡刀的专业说明书或向专业人士咨询。

篇一：博朗产品说明书全系列buran博朗系列超细干粉自动灭火装置南京燕苑博朗消防设备有限公司目录第一部分第二部分第三部分第四部分第五部分第六部分悬挂式超细干粉灭火装置1 适用范围2 技术性能3 结构和工作原理4 运输、保管注意事项5 安装注意事项6 维护注意事项7 装箱单8 售后服务悬挂式超细干粉灭火装置1 适用范围2 技术性能3 结构和工作原理4 运输、保管注意事项5 安装注意事项6 维护注意事项7 装箱单8 售后服务悬挂式超细干粉灭火装置1 适用范围2 技术性能3 结构和工作原理4 运输、保管注意事项5 安装注意事项6 维护注意事项7 装箱单8 售后服务自动温感启动器手动启动功能模块1 概述2 探测器性能特点3 主要技术指标4 安装方法5 使用方法6 维护安装注意事项备注 fzxa2.5-buran fzxa5-buran fzxa8-buran第一部分 fzxa2.5-buran悬挂式超细干粉灭火装置1 适用范围1.1 能迅速扑灭a、b、c类火灾和带电电气火灾。

如生产车间、办公室、小型仓库、商店、配电房等层高比较小的相对封闭空间及火车、船舶等交通工具消防使用。

1.2 防爆标志exibiibt32 技术性能2.1 外形尺寸（含固定架；mm）直径 ??????????????200±5高度??????????????375±52.2 灭火装置重量（kg）?????????????????????6.0±0.5 2.3 灭火超细干粉重量（kg）???????????????????2.5±0.125 2.4保护面积、体积（不密闭程度5%）2.5自动温感启动器启动温度（℃）???????????????? ≥70 2.6启动电流（a）????????????????????????≥1 2.7 检查电启动的安全电流（ma）????????????????≤150 2.8 喷射时间（秒）????????????????????????≤5 2.9 灭火时间（秒）???????????????????????≤1 2.10 使用环境温度（℃）?????????????????? －40～＋50 2.11 装置启动有效期（年）?????????????????????10 2.12 可人控电启动或与火灾自动报警系统配套使用。

保留这些说明我们产品设计符合最高质量标准，功效和设计。

我们期望您喜爱新博朗剃须刀。

本产品仅限于家用。

描述1.箔刀盒2.箔刀盒释放按钮3.剃须刀头锁动开关4.弹出式鬓角修剪器5.开关6.设置按钮（敏感度）7.设置按钮（密集度）8.复位按钮9.剃须刀显示器10.剃须刀电源插口11.旅行盒12.专用电源线充电推荐充电环境温度为41华氏度到95华氏度或5摄氏度到35摄氏度。

极端低温或高温条件下，电池可能无法正常或完全充电。

推荐剃须环境温度为60华氏度到95华氏度或15摄氏度到35摄氏度。

为了延长使用时间，不要将剃须刀暴露在温度高于50摄氏度或122华氏度环境下。

·使用电源线连接剃须刀至电源插座充电最少一小时。

·一次充满电可提供高达50分钟无绳剃须，这可能会依据你胡须生长改变。

剃须刀显示器剃须刀显示器显示电池充电状态。

在充电过程中或使用剃须刀时，对应绿色充电状态会闪烁。

当电池充满电绿色充电状态将连续点亮。

在完成充电几分钟后，剃须刀切换到待机模式：显示关闭当剃须刀打开，电池电量不足时，红色指示灯闪烁。

剩下电量还将足够用于2到3个剃须。

使用你剃须刀个性化你剃须刀使用（—）⑥和（+）⑦按钮，你能够为你脸不一样部位和特定需求选择最好设置。

不一样设置经过开关键⑤结合指示灯指示·深蓝色（强力剃须）·浅蓝色（通常）·白色（为你脸敏感地域进行一个根本舒适剃须，如颈部）为根本快速剃须我们推荐（+）设定。

当下次切换时候，上次使用设置将被激活。

完美干剃小贴士为了取得最好剃须效果，博朗提议您遵照3个简单步骤：1.一直洗脸之前刮胡子2.在任何时候，保持剃须刀垂直于你皮肤3.绷紧你皮肤，逆着胡须生长方向刮怎样使用按开关键⑤来操作剃须刀·旋转剃须刀头和自动浮动箔，调整到适应你脸轮廓每个部分。

·剃部分难剃地方（比如鼻下），以一定角度滑动剃须刀头锁定开关③到后面位置去锁定旋转头。

开发研制的升级产品，造型独特美观，采用强劲有力低噪声电机，具有适用于不同长度的剪发调节功能及可更换卸式电池，可长时间反复充电使用。

技术参数充电电压：AC.220V-50HZ输出电压：3V DC.300mA最大功率：18W充电方法：1.首次使用时，应于使用前充电8-10小时，以激活内置充电式电池，以后充电时间为8个小时，不宜充电时间过长，否则会影响电池使用寿命2.在充电过程中，指示灯一直显示红灯3.充电时将开关推至OFF，充电完结应切断电源4.在充电过程中，电源外部及变压器有微热，属于正常现象使用说明：1.使用前，应在刀刃和刀片部位滴注1-2滴润滑油，然后开启开关，空运转几秒即可工作2.电推剪采用整付刀片可脱卸结构，使用一段时间后，如果要清理刀片或更换刀片，只要用手托住刀片往外推，刀片即自动脱离刀架座，然后可以清理，安装时用手抓紧刀片，调节圈调至2.0mm 位置，对准刀座内缺口向内用力推，直至喀嚓一声后即可3.本电推剪设计为交直两用，如果充电电池内的点用完，可将充电器插上220V~50HZ电源，带线使用效果不变。

4.该电推剪配有2组电池，轮换使用，均可脱机充电或带机充电1、机身时尚高雅，符合人体工程学设计2、强劲马达、低振动，超静音设计3、特殊合金钢、陶瓷刀片，锋利、耐磨，能剪切大量头发4、高容量镍氢充电池，充满电后可连续使用一个小时左右5、五档尺寸可调节刀片，剪发长度可从0.8-2.0毫米6、充电、插电两用，当电池不够时，可以直接连接充电器使用附件：电池2块、充电器1件、清洁刷1件、润滑油1件、卡齿梳（3mm6mm9mm12 mm4种规格）说明书1份使用建议：1、使用前滴1-2滴润滑油于刀片上，使用后清扫碎发滴1-2滴润滑油再收好2、在拆刀头或组装清洁时，一定要将调节环调到2.0mm处，才能开始拆卸或组装刀头3、充电时间不得超出6小时静音注释：静音不是说没有声音，而是相对来说声音很轻。

这款剪发器在对声音的处理上十分的完美，该剪发器的核定声音为30-60分贝，正常为35分贝左右。

电动剃须刀使用说明书使用说明书一、产品概述电动剃须刀是一款专为男性设计的便捷剃须工具。

其采用先进的电动马达技术，配备锋利的刀片，可以实现高效、舒适的剃须效果。

本使用说明书旨在帮助用户正确操作电动剃须刀，以获得最佳的剃须体验。

二、安全注意事项在使用电动剃须刀之前，请确保仔细阅读以下安全注意事项，并依据指示进行操作：1. 请勿将电动剃须刀浸泡在水中或暴露在潮湿的环境中，以避免电路故障或触电危险。

2. 使用前，请检查剃须刀的刀片是否完好无损，如发现损坏或松动，请勿使用并及时更换。

3. 使用过程中，请确保剃须刀周围没有易燃物品，避免造成火灾事故。

4. 请勿将电动剃须刀置于儿童可接触到的地方，以免造成意外伤害。

三、操作步骤1. 准备步骤a. 确保电动剃须刀已经充电完毕，并将充电器拔下。

b. 清洁脸部皮肤，以保持干净。

2. 打开电动剃须刀按下电动剃须刀上的开关按钮，剃须刀将启动。

3. 调整刀头为了获得最佳的剃须效果，可以根据需要旋转刀头进行调整。

一般情况下，刀头可以上下移动，以适应不同脸部轮廓。

4. 开始剃须a. 将电动剃须刀贴近脸部皮肤，以适当的角度进行剃须。

b. 以轻柔的手势，沿着脸部的生长方向进行剃须，避免用力过猛或来回摩擦。

c. 可以根据个人需求选择湿剃或干剃的方式，但请勿在水中使用非防水电动剃须刀。

5. 剃须结束完成剃须后，请关闭电动剃须刀的开关，并清洁剃须刀的刀头。

6. 清洁与维护a. 将电动剃须刀的刀头取下，用清水冲洗干净。

b. 使用刷子将刀片上的剃须污垢清除干净。

c. 将刀头晾干后，重新安装到电动剃须刀上。

四、使用建议为了获得更好的剃须效果和使用体验，以下是一些建议：1. 建议每7-10天更换一次刀头，以保持剃须刀的良好状态和性能。

2. 在剃须前进行脸部清洁，以软化面部毛发，使剃须更加舒适。

3. 根据个人喜好和脸部特点，可以尝试不同的剃须位置和角度，以找到最适合自己的剃须方式。

五、故障排除如果在使用过程中遇到以下问题，请按以下步骤进行故障排除：1. 电动剃须刀无法启动a. 确保电动剃须刀已经充电完毕。

S7783/78shave, advanced skin protectionwith SkinIQ T echnologyThe Philips Series 7000 glides smoothly over your skin, while cutting each hairclose - even on 3 day beards. Equipped with advanced SkinIQ technology, theshaver senses, adapts and guides on the correct motion, for better skinprotection.A close shaveFollows the contours of your faceMore cutting performance in every strokeGuides hair into the optimal cutting positionUnique OneBlade technologySkinIQ technologyGuides you to an improved shaving techniqueMaster your technique with the Philips GroomTribe appA shaver with the power to tame beardsA shaver that reduces friction to minimise irritationFor a convenient shave60 minutes of shaving from a 1 hour chargePowerful cleaning pod for maintenance and hygieneFully charged in one hourThe electric shaver with an Eco passportHighlightsProtective SkinGlidecoatingA protective coating lies between the shaver heads and your skin . Made of up to 2000 micro -tech beads per squaremillimetre , it reduces friction on skin by 25%*,to minimise irritation .SteelPrecisionbladesPowerful yet gentle , the 45 self -sharpening SteelPrecision blades on this Philips shaver complete up to 90,000 cutting actions per minute , cutting more hair per stroke ** for a clean , comfortable finish .Motion ControlsensorA n electric shaver motion -sensing technology tracks how you shave and guides you to a more e fficient technique . A fter just threeshaves , the majority of men achieved a better shaving technique for fewer passes ***.Personalisation viaappPair your Philips electric shaver to theGroomTribe app and prepare to master your technique . Just track your progress andpersonalise your routine to achieve a shave that 's both close and kind .Power A daptsensorThe electric shaver has an intelligent facial -hair sensor that reads hair density 125 times per second . The technology auto -adapts cutting power for an e ffortless and gentle shave .360 D FlexingheadsDesigned to follow the contours of your face ,this Philips electric shaver has fully flexible heads that turn 360° for a thorough and comfortable shave .Hair -Guide precisionheadsThis new -shape precision shaver is enhanced with hair -guiding channels for optimal cutting and skin comfort .Cable -free Quick CleanPod10 x more e ffective than cleaning with water ****, the powerful cleaning podthoroughly cleans and lubricates your shaver in just 1 minute . Using it helps maintain shaver performance and increase hygiene .Unique OneBladetechnologyDesigned for facial styling and bodygrooming , the Philips OneBlade trims , edges and shaves any length of hair . It delivers an easy and comfortable shave thanks to a glide coating and rounded tips . A nd with a cutter that moves at 200 x per second , it 's e fficient even on longer hairs .SpecificationsTrimming and shaving performance Shaving system: Contour-following technology, Dual protection system Trimming system: Contour-following technologyA ccessoriesComb: Click-on skin guard, Click-on body combMaintenance: Cleaning brush (S7000), Storage cap (OneBlade)Charging standExtra replaceable bladeQuick Clean Pod: 1 cartridge included, Y es Integrated pop-up trimmerTravel and storage: Travel caseSoftwareA pp: Connects via Bluetooth®, GroomTribe Software update: Philips offers relevant software updates for a period of 2 years after the date of purchaseSmartphone compatibility: iPhone andA ndroid™ devicesPowerBattery type: Li-ion (S7000), Lithium-ion(OneBlade)Run time: 60 minutesCharging: 1 hour full charge (S7000), 5 minquick charge (S7000), 4 hours full charge(OneBlade)A utomatic voltage: 100-240 VStand-by power: 0.04 W (S7000) WMaximum Power Consumption: 2 (OneBlade),9 (S7000) WDesignHandle: Rubber grip (S7000), Ribbed rubbergrip (OneBlade)Colour(s): Ink Black (S7000), Lime green(OneBlade), Charcoal grey (OneBlade)Shaving heads: A ngularService2 year warranty: Y es (S7000), On the handle(OneBlade)Replacement head (S7000): Replace every2 yrs with SH71Replacement head (OneBlade): QP210,QP220, QP610, QP620, Replace every 4months*Shaving PerformanceContour following: 360 D Flexing headsShaving system: SteelPrecision bladesSkinIQ technology: Power A dapt sensor,Protective SkinGlide coating, Motion ControlsensorEase of useDisplay: Motion control indicator, LEDdisplay, Battery level indicator, Travel lock,Charging indicator on adapterCleaning: One-touch open, Fully washableWet and Dry: Wet and dry useCharging: Rechargeable* * Tested versus Philips Series 3000.* compared to non-coated material* * * Based on Philips Series S7000 and Groom Tribe appusers in 2019.* * * * comparing shaving debris after using cleaning fluidvs. water in the cartridge© 2023 Koninklijke Philips N.V.A ll Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Issue date 2023‑09‑01 Version: 5.5.1E A N: 87 10103 99695 8 。

RAZOR LASER USER MANUAL1. UnpackingThank you for choosing our products. For your own safety, please read this manual before installing the device. This manual covers the important information on installation and applications. Please install and operate the fixture with following instructions, make sure the power is off before opening the light or repairing. Meanwhile, please keep this manual well for future needs.It is made of a new type of high temperature strength of engineering plastics and cast aluminum casing with nice outlook. The fixture is designed and manufactured strictly following CE standards, complying with international standard DMX512 protocol. It’s available independently controlled and linkable with e ach other for operation. And it is applicable for large-scale live performances, theater, studio, nightclubs and discos.6 modules RGB laser light which features high brightness and stability. Please carefully unpack it when you receive the fixture and check whether it is damaged during the transportation..1.2. Safety InstructionsThis device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe operation, it is necessary for the user to follow the safety instructions and warning notes written in this user manual.If the device has been exposed to temperature changes due to environmental changes, do not switch it on immediately. The arising condensation could damage the device. Leave the device switched off until it has reached room temperature. This device falls under protection-class I. Therefore, it is essential that the device be earthed.The electric connection must carry out by qualified person.The device shall only be used with rate voltage and frequency.Make sure that the available voltage is not higher than stated at the end of this manual.Make sure the power cord is never crimped or damaged by sharp edges. If this would be the case, replacement of the cable must be done by an authorized dealer. Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power cord by the plug. Never pull out the plug by tugging the power cord.During initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the device is defective, it should decrease gradually. Please don't project the beam onto combustible substances.Fixtures cannot be installed on combustible substances, keep more than 50cm distance with wall for smooth air flow, so there should be no shelter for fans and ventilation for heat radiation.If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard..2.3. Key FeaturesVoltage: AC100-240V,50/60HZLaser color: RGB full colorLaser power: 3WRGB 500mw*6PCS （R:100mw G:200mw B:200mw）Laser pattern: a variety of rough beam effect patterns.Y Axis rotating: 240°Rotation angle: 270°Control mode: Music / Automatic / DMX512 (11/26/38CH) Scanning system: stepping motorScanning angle of motor: 25 degreesRated power：<180WWorking environment: indoor LampProduct size: 85 x 16 x 45 cmSize of carton case (1in1): 92 x 16 x 32 cmN.W: 11kgs / G.W：12.6kgsSize of carton case (2in1): 94.5 x 34 x 33.5 cmN.W: 23kgs / G.W：26.5kgs.3.4. Operation Instructions-The moving head is for laser purpose.-Don’t turn on the fixture if it’s been through severe temperatur e difference like after transportation because it might damage the light due to the environment changes. So, make sure to operate the fixture until it is in normal temperature.-This light should be kept away from strong shaking during any transportation or movement.-Don’t pull up the light by only the head, or it might cause damages to the mechanical parts.-Don’t expose the fixture in overheat, moisture or envi ronment with too much dust when installing it. And don’t lay any power cables on the floor. Or it might cause electronic shock to the people.-Make sure the installation place is in good safety condition before installing the fixture.-Make sure to put the safety chain and check whether the screws are screwed properly when installing the fixture.-Make sure the lens is in good condition. It’s recommended to replace the units if there are any damages or severe scratch.-Make sure the fixture is operated by qualified personnel who knows the fixture before using.-Keep the original packages if any second shipment is needed.-Don’t try to change the fixtures without any instruction by the manufacturer or the appointed repairing agencies.-It is not in warranty range if there are any malfunctions from not following the user manual to operate or any illegal operation, like shock short circuit, electronic shock,lamp broke, etc..4.5.Display menu controlPress MENU to choose Address / DMX/ Color/ Manual/ Demo /Auto/Sound/ Temp /Version /Hours, then press ENTER to confirm or to enter the next step.if there are more function for options, press UP/DOWN to choose, then press ENTER to confirm, then press MENU to exit, or wait for 10 and exit automatically.Remarks: if no operation on any button, the display will turn off automatically in20seconds; if no DMX signal, the first dot of the display will turn on statically, if with DMX signal, the dot will flashDMX Address A001---A512 Address CodeChannel Mode 11CH, 26CH, 38CH channel selectionShow Mode SOUND AUTO, effect selectionSlave Mode MASTER, SLAVE, main and auxiliary machine selectionBlack Out YES, NO Standby modeSound State ON, OFF voice switchSound Sense sound sensitivity (0 off, 100 most sensitive)Pan Inverse YES, NO level reverseTilt1 Inverse YES, NO vertical reverseTilt2 Inverse YES, NO vertical reverseTilt3 Inverse YES, NO vertical reverseTilt4 Inverse YES, NO vertical reverseTilt5 Inverse YES, NO vertical reverseTilt6 Inverse YES, NO vertical reverseBack Light ON, OFF backlight switchAuto Test Auto TestFirmware Version V104 software version numberDefaults YES, NO Restore factory settingsSystem Reset YES, NO Machine reset.5.6.DMX Channels.6..10.7. Maintenance and CleaningThe following points must be considered during the inspection:1. All screws for installing the devices or parts of the device must be tightly connected and must not be corroded.2. There must not be any deformations on the housing, color lenses, fixations and installation spots (ceiling, suspension, trussing).3. Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances.4. The electric power supply cables must not show any damage, material fatigue or sediments.Further instructions depending on the installation spot and usage must be adhered by a skilled installer and any safety problems have to be removed.In order to make the lights in good condition and extend the lifetime, we suggest a regular cleaning to the lights.1) Clean the inside and outside lens each week to avoid the weakness of the lights due to accumulation of dust.2) Clean the fan each week.3) A detailed electric check by approved electrical engineer each three month, make sure that the circuit contacts are in good condition, prevent the poor contact of circuit from overheating.We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents. There are no serviceable parts inside the device. Please refer to the instructions under “Installation instructions”.。

Shaver series 5000ComfortCut Blade System5-direction Flex HeadsOil-control cleansing brushXZ5800/69Close, Fast ShaveThe Shaver Series 5000 adds speed to your morning routine with a fast,ComfortCut Blade System and fully washable heads.A comfortable and close end resultGet a comfortable dry or refreshing wet shave with AquatecRounded edges move smoothly over skin for a protective shaveHeads flex in 5 directions for a fast close shaveEasy to use40 minutes of cordless shaving1 hour charging time1-level battery and travel lock Indicators2-year guarantee, worldwide voltage and replaceable bladesGet the most out of your shaverClick-on brush to cleanse more thoroughly than by handHighlights5-direction Flex Heads5-direction Flex Heads with 5 independent movements ensure close skin contact for a fast and close shave even on neck and jaw line.ComfortCut Blade SystemGet a comfortable shave, wet or dry. OurComfortCut blades with rounded profile heads glide smoothly across your skin while protecting it from nicks and cuts.Aquatec Wet & DryChoose how you prefer to shave. With the Aquatec Wet & Dry seal, you can opt for a quick yet comfortable dry shave. Or you can shave wet – with gel or foam – even under the shower.40 minutes of cordless shavingYou'll have 40+ minutes of running time –that's about 13 shaves – on a one-hour charge.This shaver only operates in cordless mode.1-hour charging timeShave longer with every charge, thanks to our powerful energy-efficient, long-lasting battery.Do a quick charge for 5 minutes and you’ll have enough power for one shave.SmartClick cleansing brushClick on our cleansing brush to clean your face more thoroughly than you can by hand. Use it with the cleanser of your choice. It removesdead skin cells and increases micro-circulation, leaving your skin feeling fresh and radiant.LED displayThe intuitive display shows relevantinformation, enabling you to get the best performance out of your shaver: - 1-level Battery Indicator - Battery Low Indicator -Travel Lock IndicatorBuilt to lastAll of our shavers come with a 2-yearworldwide guarantee and can adapt to any voltage. The long-lasting blades only need to be replaced after 2 years.SpecificationsShaving PerformanceShaving system: ComfortCut Blade System Contour following: 5-direction Flex Heads SkinComfort: AquaTec Wet & Dry AccessoriesSmartClick: Oil-control cleansing brush Maintenance: Protective capEase of useDisplay: 1 level battery indicator, Battery low indicator, Travel lock indicatorCleaning: Fully washableOperation: Unplug before use DesignHandle: Ergonomic grip & handlingColor: Phasma silver - Bright silverPowerBattery Type: NiMHRun time: 40 min / 13 shavesCharging: 1 hour full charge, Quick charge 5min for 1 shaveAutomatic voltage: 100-240 VMax power consumption: 9 WStand-by power: 0.1 WService2-year guaranteeReplacement head: Replace every 2 yrs withSH50Cleansing brush RQ560 or RQ563: Replaceevery 3-6 monthsPackagingSpecial: Giftpack* SmartClick cleansing brush - compared to manualcleansing in same condition, according to the resultsfrom the external clinical test on 30 candidates and in 3hours after cleansing© 2019 Koninklijke Philips N.V.All Rights reserved.Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips N.V. or their respective owners.Issue date 2019‑07‑30 Version: 7.2.1EAN: 08 71010 38213 97 。

剃须刀的包装说明标准一、产品概述本包装包含一款高性能的剃须刀，专为男士设计，可满足各种胡须需求。

剃须刀具有先进的刀片技术和强大的马达，能够快速、有效地刮胡子。

本产品采用人体工程学设计，使用舒适，适合各种手型。

二、产品特点1.三刀片设计：三刀片同时工作，快速刮胡子。

2.强大马达：高转速马达，提供强劲动力，刮胡子更轻松。

3.人体工程学设计：适合各种手型，易于握持。

4.防水的功能：可以在水下进行剃须。

三、产品规格1.颜色：黑色或银色。

2.尺寸：长x宽x高。

3.重量：具体重量。

四、使用方法1.充电：将剃须刀放在充电座上，然后接通电源。

2.剃须：按下开关按钮，然后将剃须刀置于面部，顺着胡须生长的方向轻轻滑动。

3.清洁：用刷子清理剃须刀头部的胡须残渣。

五、安全警示1.请勿在充电时使用剃须刀。

2.请勿在没有成年人监护的情况下让儿童使用剃须刀。

3.请勿在潮湿的环境中使用剃须刀。

4.请勿将剃须刀放在高温或阳光直射的地方。

5.如果您有任何疑问或产品出现故障，请立即停止使用并与售后服务部门联系。

六、保养方法1.清洁刀头：定期使用刷子清理剃须刀头部的胡须残渣。

2.润滑：定期在剃须刀的轴承部分加注润滑油以保持其运转顺畅。

3.更换刀片：根据个人使用频率和胡须硬度，定期更换刀片以保证剃须效果和安全。

一般来说，每2-3个月更换一次刀片。

4.定期保养：建议每年进行一次全面的保养，包括清洗、润滑和检查刀片等部分。

七、生产商信息包括生产商名称、联系方式、网址等信息，以便消费者在需要时进行联系和查询。

八、售后服务本产品提供一定期限的售后服务，包括保修、维修、退换货等服务政策，以及提供消费者咨询服务等。

如果消费者在使用过程中遇到问题或者需要咨询售后服务事宜，可以通过电话、邮件或在线客服等途径联系我们的服务团队，我们将尽快为您提供帮助和服务。

Power where you need itThe LS19 has the power you need to cope with really tough applications. Together, the well designed motor and the speed governor ensure that you get the most from the tool all the time. If you compare the amount of power in this small tool with the weight you will find that the power to weight ratio is outstanding.Long life, lubrication free motorSince the patented motor is lubricant free, you will enjoy maximum power output for years. A conventional motor that’s badly lubricated suffers rapid wear. And wear leads to a drop in performance. But with our lubricant-free motor, you can expect top performance day after day.Quieter than everHigh power does not have to mean high sound levels. Noise has been minimized in three ways. First, our patented motor design alone results in a significant reduction. Noise levels are further reduced by leading exhaust air through a silencer at the back of the tool. Finally, exhaust air is piped away in a hose, reducing noise still further.5 different models to suit your needsThe LS19-series comes in 5 different models to make it easy for you to choose the right tool for your job. There are three angled models for grinding and sanding and twozz straight models for die grinding, one standard and one extended. Of course all models feature the same fine tuned vane motor, something you can trust will just keep The trigger can easily be repositioned to suit the individual operator.The harder you push,the harder they work00500010000150002000025000150300450O u t p u t p o w e r W a t tSpeed rpmLSF19 S200Competitor A Competitor B Competitor CPower / WeightLSF19 S200 vs. competitors. Power vs. RPMWith LSF grinders you get top productivity thanks to the combination of high power and high rpm.LSV19 sander/polisherLSV19angle grinderLSV19 die grinderLSF19 extended die grinderLSF19 die grinderAtlas Copco AB(publ) SE-105 23 Stockholm, Sweden Phone: +46 8 743 80 00Reg. no: 9833 1815 01 – E N © A t l a s C o p c o A B , S t o c k h o l m , S w e d e n . P r o d u c t i o n : A t l a s C o p c o B r a n d S t u d i o . J a n u a r y 2022Technical dataModel Max free speed Max output Max wheeldia Length Weight consumption at max output consumption at free speed Rec. hose size Air inlet thread Scatter damped Ordering No.r/min kW hp mm in mm in kg lb l/s cfm l/s cfm mm in BSP NPT Angel grinder LSV19 S170-08170000.450.68031867.30.71.611.2236.614103/81/41/4No 8423 0111 40ModelMax free speed Max output Collet size Length Weight Air consumption at max output Airconsumption at free speed Rec. hose size Air inlet thread Scatter damped Ordering No.r/minkWhpmminmminkglbl/scfml/scfmmminBSPNPTStraight die grinders LSF19 S200-1200000.50.6761/41937.60.5 1.29.620 3.57103/81/41/4Yes 8423 1224 80LSF19 S300-1300000.50.6761/41937.60.5 1.211.323 6.614103/81/41/4Yes 8423 1224 81LSF19 S300-1R 300000.50.6761/41937.60.5 1.211.323 6.614103/81/41/4No 8423 1224 89LSF19 S460-1460000.50.6761/41937.60.5 1.211.4241531103/81/41/4Yes 8423 1224 82Straight extended die grindersLSF19 S200E-1200000.50.6761/429311.50.7 1.59.620 3.57103/81/41/4Yes 8423 1224 85LSF19 S300E-1300000.50.6761/429311.50.7 1.511.323 6.614103/81/41/4Yes 8423 1224 86LSF19 S300E-1R 300000.50.6761/429311.50.7 1.511.323 6.614103/81/41/4No 8423 1224 88LSF19 S460E-1460000.50.6861/429311.50.7 1.511.4241531103/81/41/4Yes 8423 1224 87LSF19 S460E-1R 460000.50.6861/429311.50.7 1.511.4241531103/81/41/4No 8423 1224 90Angle die grindersLSV19 S200-1200000.460.661/41867.30.6 1.311.3237.515103/81/41/4No 8423 0111 41LSV19 S120-1120000.460.661/41867.30.6 1.311.3237.515103/81/41/4No 8423 0111 43LSV19 S080-180000.370.561/41867.30.6 1.311.323 6.513.8103/81/41/4No 8423 0111 46LSV19 S200-1F200000.460.661/41857.30.61.311.3237.515103/81/41/4No8423 0111 47ModelMax free speedMax output Rec size pad diaCollet size Spindle threadSpindle length Length Weight Airconsumption at max Output Air consumption at free speed Rec. hose size Air inletthread OrderingNo.r/min kW hp mminmminmminmminkglbl/scfml/scfmmminBSP NPTAngle sanders with collet LSV19 S080-180000.370.575361/4---1867.30.6 1.311.323 6.513.8103/81/41/48423 0111 46LSV19 S120-1120000.460.675361/4---1867.30.6 1.311.3237.515103/81/41/48423 0111 43LSV19 S200-1200000.460.650261/4---1867.30.6 1.311.3237.515103/81/41/48423 0111 41Angle sanders with threaded spindleLSV19 S08080000.370.5753--1/4 UNC 80.311867.30.6 1.311.323 6.513.8103/81/41/48423 0111 45LSV19 S120200000.460.6753--1/4 UNC 80.311867.30.6 1.311.3237.515103/81/41/48423 0111 44LSV19 S200120000.460.6502--1/4 UNC80.311867.30.61.311.3237.515103/81/41/48423 0111 42Service kit Ordering No.LSF194081 0486 90LSV194081 0488 90Accessories Ordering No.BSP/ NPTMULTIFLEX-1/48202 1350 208202 1350 26MultiFlex Swivel connector:an ergonomic solutionR= Rigid mount F = Fixtured。