编订：__________________单位：__________________时间：__________________井下机械维修安全操作规程(正式)Standardize The Management Mechanism To M

井下抽水工操作规程1、提前30分钟到达工作岗位，严格执行交接班制度，查看交接班记录和设备运行记录；2、接班后，首先检查各部螺栓是否牢固，各润滑点是否注油，垫子、盘根、联轴器是否松动，吸水管及排水管有无堵塞现象。3、开泵前必须对设备进行认真的

Guide operators to deal with the process of things, and require them to be familiar with the details of safety technolog

文件编号：TP-AR-L1298There Are Certain Management Mechanisms And Methods In The Management Of Organizations, And The Provisio

操作规程编号：YTO-FS-PD543井下钳工安全操作规程通用版In Order T o Standardize The Management Of Daily Behavior, The Activities And T asks Are

编号：CZ-GC-02347( 操作规程)单位：_____________________审批：_____________________日期：_____________________WORD文档/ A4打印/ 可编辑井下作业安全操作规程

井下安装工安全操作规程Through the process agreement to achieve a unified action policy for different people, so as to coordinate ac

井下作业安全操作规程1、每个矿井至少有两个独立的能行人的直达地面的安全出口，其间距不小于30米;矿井每个中段采场至少有两个能行人的安全出口并与直达地面的出口相通。2、矿井必须有独立的能保障井下作业所需通风量的通风采场;通风不良好的掘进工作面

The prerequisite for vigorously developing our productivity is that we must be responsible for the safety of our company

《井下安全操作规程》课件

( 操作规程 )单位：_________________________姓名：_________________________日期：_________________________精品文档 / Word文档 / 文字可改井下电气安全操作

井下作业安全操作规程-制度大全井下作业安全操作规程之相关制度和职责，1、每个矿井至少有两个独立的能行人的直达地面的安全出口,其间距不小于30米;矿井每个中段采场至少有两个能行人的安全出口并与直达地面的出口相通。2、矿井必须有独立的能保障井下

操作规程编号：LX-FS-A14529 井下电气安全操作规程标准范本In The Daily Work Environment, The Operation Standards Are Restricted, And Relevant Pe

操作规程编号：LX-FS-A20198 井下作业安全操作规程标准范本In The Daily Work Environment, The Operation Standards Are Restricted, And Relevant Pe

❖ ③井下炸药库的设计，要100%符合安全卫生要求， 100%取缔灯泡烘烤，并用热风干燥。❖ ④爆破工要100%采用一次起爆并站好岗，放好哨， 爆破物品的管理要100%装箱上锁。❖

操作规程编号：YTO-FS-PD202井下水泵工安全操作规程通用版In Order T o Standardize The Management Of Daily Behavior, The Activities And T asks Ar

井下电工安全操作规程Through the process agreement to achieve a unified action policy for different people, so as to coordinate act

井下电工安全操作规程1 、严格执行井上电器有关安全操作规程和井下操作规定,严格执行交接班制度。2、必须熟悉井下各段和井巷的动力、照明、通风、信号的线路分布情况及电器设备安装地点。配电盘和开关要设在安全地点和干燥处。3、井下严禁带电作业不准指

井下测工安全操作规程(新版)The safety operation procedure is a very detailed operation description of the work content in the form of

井下各工种安全操作规程一凿岩工安全操作规程1、凿岩工必须了解和熟悉作业地点的技术要求，必须按技术设计施工。2、打眼前要检查凿岩机、钎子、气腿是否符合要求，检查风水管接头是否严密，做到不漏水、不漏气，检查凿岩机是否加了油，有无损坏。3、打眼前